TPLINK-ACL-RULE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
98

tpMacRuleTable

table
.1.3.6.1.4.1.11863.6.26.1.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpMacRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpMacRuleTable' 
A list of L2 MAC ACL rule entries.
Here you can add MAC ACL rules for further ACL configuration.
tpMacRuleEntry row .1.3.6.1.4.1.11863.6.26.1.1.1.1
An entry contains of the information of MAC ACL.
Indexes
Column Syntax OID
tpMacAclId
MAC ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.1
tpMacRuleId
MAC ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.2
tpMacAclName
MAC ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID.
The first rule created in an ACL entry will set the ACL name field, however the following rules can never change the ACL name …
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.3
tpMacSecOperation
MAC ACL Security Operation.
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.4
tpMacCounterLogging
MAC ACL rule counter logging operation.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.5
tpMacSmacAddress
Source MAC address, string length setting to zero means that the source MAC address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.6
tpMacSmacMask
Source Mac Mask, string length setting to zero means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.7
tpMacDmacAddress
Destination MAC address, string length setting to zero means that the destination MAC address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.8
tpMacDmacMask
Destination Mac Mask, string length setting to zero means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.9
tpMacVlanId
VLAN ID, 0-4094, value '0' means that the vid field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.10
tpMacEtherType
Ethernet protocol type, 0x0-0x10000.
Value '65536' or '0x10000' means that the EtherType field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.11
tpMacPri
802.1P priority, 0-8, value '8' means that the priority field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.12
tpMacTimeSegment
MAC ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.1.1.13
tpMacRuleStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.1.1.1.14

tpIpRuleTable

table
.1.3.6.1.4.1.11863.6.26.1.1.2 · 1 row entry · 21 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpIpRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpIpRuleTable' 
A list of IP rule entries.
Here you can add IP ACL rules for further ACL configuration.
tpIpRuleEntry row .1.3.6.1.4.1.11863.6.26.1.1.2.1
An entry contains of the information of IP ACL.
Indexes
Column Syntax OID
tpIpAclId
IP ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.1
tpIpRuleId
IP ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.2
tpIpAclName
IP ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.2.1.3
tpIpSecOperation
IP ACL Security Operation.
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.4
tpIpCounterLogging
IP ACL rule counter logging operation.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.5
tpIpFragment
IP fragment, conflicts with all the L4 feature.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.6
tpIpSipAddress
Source IP address, value '0.0.0.0' means that the source IP address is disabled.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.7
tpIpSipMask
Source IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.8
tpIpDipAddress
Destination IP address, value '0.0.0.0' means that the Destination IP address is disabled.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.9
tpIpDipMask
Destination IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.10
tpIpProtocol
L4 protocol type, 0-255, value '0' means this field is disabled.
This field conflicts with the TCP Flags or the source/destination port numbers
when it is not the value '6'(TCP), or '17'(UDP).
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.11
tpIpTcpFlag
IP TCP flag, this field is described as a bit-map structure:
There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0).
The lower 6 bits show us the 6 kind of TCP f…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.12
tpIpSourcePort
IP TCP/UDP source port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.13
tpIpSourcePortMask
IP TCP/UDP source port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.2.1.14
tpIpDestPort
IP TCP/UDP destination port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.15
tpIpDestPortMask
IP TCP/UDP destination port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.2.1.16
tpIpDscp
IP DSCP, 0-64, value '64' means this field is disabled.
conflicts with the Tos and Pre.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.17
tpIpTos
IP type of service(ToS), 0-16, value '16' means this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.18
tpIpPre
IP pre, 0-8, value '8' means this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.19
tpIpTimeSegment
IP ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.2.1.20
tpIpRuleStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.1.2.1.21

tpCombRuleTable

table
.1.3.6.1.4.1.11863.6.26.1.1.3 · 1 row entry · 28 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpCombRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpCombRuleTable' 
A list of combined MAC+IP rule entries.
Here you can add combined ACL rules for further ACL configuration.
tpCombRuleEntry row .1.3.6.1.4.1.11863.6.26.1.1.3.1
An entry contains of the information of Combined ACL.
Indexes
Column Syntax OID
tpCombAclId
Combined MAC+IP ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.1
tpCombRuleId
Combined ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.2
tpCombAclName
Combined ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.3
tpCombSecOperation
Combined ACL Security Operation.
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.4
tpCombCounterLogging
Combined ACL rule counter logging operation.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.5
tpCombSmacAddress
Source MAC address, string length setting to zero means that the source MAC address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.6
tpCombSmacMask
Source MAC Mask, string length setting to zero means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.7
tpCombDmacAddress
Destination MAC address, string length setting to zero means that the destination MAC address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.8
tpCombDmacMask
Destination MAC Mask, string length setting to zero means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.9
tpCombVlanId
VLAN ID, 0-4094, value '0' means that the vid field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.10
tpCombEtherType
Ethernet protocol type, 0x0-0x10000.
Value '65536' or '0x10000' means that the EtherType field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.11
tpCombPri
802.1P priority, 0-8, value '8' means that the priority field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.12
tpCombSipAddress
Source IP address, value '0.0.0.0' means that the source IP address is disabled.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.13
tpCombSipMask
Source IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.14
tpCombDipAddress
Destination IP address, value '0.0.0.0' means that the destination IP address is disabled.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.15
tpCombDipMask
Destination IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.16
tpCombDscp
IP DSCP, 0-64, value '64' means this field is disabled.
conflicts with the Tos and Pre.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.17
tpCombTos
IP type of service(ToS), 0-16, value '16' means this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.18
tpCombPre
IP pre, 0-8, value '8' means this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.19
tpCombFragment
IP fragment, conflicts with all the L4 feature.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.20
tpCombProtocol
L4 protocol type, 0-255, value '0' means this field is disabled.
This field conflicts with the TCP Flags or the source/destination port numbers
when it is not the value '6'(TCP), or '17'(UDP).
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.21
tpCombSourcePort
IP TCP/UDP source port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.22
tpCombSourcePortMask
IP TCP/UDP source port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.23
tpCombDestPort
IP TCP/UDP destination port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.24
tpCombDestPortMask
IP TCP/UDP destination port mask, 0000-ffff, 4 hex number, NULL string will set this mask to a default value ffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.25
tpCombTcpFlag
IP TCP flag, this field is described as a bit-map structure:
There are 12 bits of this field, the higher 6 bits show us whether these TCP flags are enabled(1) or disabled(0).
The lower 6 bits show us the 6 kind of TCP f…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.26
tpCombTimeSegment
Combined ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.3.1.27
tpCombRuleStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.1.3.1.28

tpIPv6RuleTable

table
.1.3.6.1.4.1.11863.6.26.1.1.4 · 1 row entry · 16 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpIPv6RuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpIPv6RuleTable' 
A list of IPv6 rule entries.
Here you can add IPv6 ACL rules for further ACL configuration.
tpIPv6RuleEntry row .1.3.6.1.4.1.11863.6.26.1.1.4.1
An entry contains of the information of IPv6 ACL.
Indexes
Column Syntax OID
tpIPv6AclId
IPv6 ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.1
tpIPv6RuleId
IPv6 ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.2
tpIPv6AclName
IPv6 ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.3
tpIPv6SecOperation
IPv6 ACL Security Operation.
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.4
tpIPv6CounterLogging
IPv6 ACL rule counter logging operation.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.5
tpIPv6TrafficClass
Traffic Class DSCP, 0-64, value '64' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.6
tpIPv6FlowLabel
IPv6 Flow Label, 0x0-0x100000, value '0x100000' or '1048576' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.7
tpIPv6SipAddress
IPv6 source IP address, only upper 64 bits supported; the all-zero address means that the source IPv6 address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.8
tpIPv6SipMask
IPv6 source IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.9
tpIPv6DipAddress
IPv6 destination IP address, only upper 64 bits supported; the all-zero address means that the destination IPv6 address is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.10
tpIPv6DipMask
IPv6 destination IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.11
tpIPv6Protocol
IPv6 Protocol, 0-255, value '0' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.12
tpIPv6SourcePort
IPv6 L4 source port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.13
tpIPv6DestPort
IPv6 L4 destination port, 0-65536, value '65536' means that this field is disabled.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.14
tpIPv6TimeSegment
IPv6 ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.4.1.15
tpIPv6RuleStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.1.4.1.16

tpPktCntntRuleTable

table
.1.3.6.1.4.1.11863.6.26.1.1.6 · 1 row entry · 15 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpPktCntntRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpPktCntntRuleTable' 
A list of Packet Content rule entries.
Here you can add Packet Content ACL rules for further ACL configuration.
tpPktCntntRuleEntry row .1.3.6.1.4.1.11863.6.26.1.1.6.1
An entry contains of the information of Packet Content ACL.
Indexes
Column Syntax OID
tpPktCntntAclId
Packet Content ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.6.1.1
tpPktCntntRuleId
Packet Content ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.6.1.2
tpPktCntntAclName
Packet content ACL name, NULL string will give this ACL a default name as 'ACL_n', n stands for ACL ID.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.3
tpPktCntntSecOperation
Packet Content ACL Security Operation.
Enumerationr/w
Enumerated Values:
0permit
1deny
 .1.3.6.1.4.1.11863.6.26.1.1.6.1.4
tpPktCntntCounterLogging
Packet Content ACL rule counter logging operation.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.26.1.1.6.1.5
tpPktCntntChunkValue0
Packet Content ACL chunk0 value(32bit), a hex string such as eafff3, this maximum value of a chunk is 0xffffffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.6
tpPktCntntChunkMask0
Packet Content ACL chunk0 mask(32bit), an 8 hex string such as ffffffff, if mask is set to NULL(zero length), it means ffffffff.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.7
tpPktCntntChunkValue1
Packet Content ACL chunk1 value(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.8
tpPktCntntChunkMask1
Packet Content ACL chunk1 mask(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.9
tpPktCntntChunkValue2
Packet Content ACL chunk2 value(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.10
tpPktCntntChunkMask2
Packet Content ACL chunk2 mask(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.11
tpPktCntntChunkValue3
Packet Content ACL chunk3 value(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.12
tpPktCntntChunkMask3
Packet Content ACL chunk3 mask(32bit).
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.13
tpPktCntntTimeSegment
Packet Content ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.1.6.1.14
tpPktCntntRuleStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.1.6.1.15

tpAclRuleCounterTable

table
.1.3.6.1.4.1.11863.6.26.1.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpAclRuleCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-RULE-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-RULE-MIB::tpAclRuleCounterTable' 
A list of ACL rule counter entries.
Here you can view the matched packets counter of the specified ACL rule.
tpAclRuleCounterEntry row .1.3.6.1.4.1.11863.6.26.1.1.7.1
An entry contains of the matched counter of an ACL rule.
Indexes
Column Syntax OID
tpAclCounterAclId
The ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.7.1.1
tpAclCounterRuleId
The ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.7.1.2
tpAclCounterLoggingEnable
The counter logging enable/disable status of the specified ACL rule.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.7.1.3
tpAclCounterNum
The matched packets counter of the specified ACL rule.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.1.7.1.4