TPLINK-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

tpAclActionTable

table
.1.3.6.1.4.1.11863.6.26.1.3.1 · 1 row entry · 12 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpAclActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-MIB::tpAclActionTable' 
A list of ACL rule action entries.
tpAclActionEntry row .1.3.6.1.4.1.11863.6.26.1.3.1.1
An entry contains of the information of ACL rule action.
Indexes
Column Syntax OID
tpAclActionAclId
The ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.1
tpAclActionRuleId
The ACL rule ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.2
tpAclActionMirrorPort
mirror the data packets to the specified port.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.3.1.1.3
tpAclActionRedirectPort
Redirect the data packets to the specified port.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.3.1.1.4
tpAclActionConditionRate
Limit the transmission rate of the data packets(0-1000000Kbps).
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.5
tpAclActionConditionBurst
The burst size of the condition rate limit metering.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.6
tpAclActionConditionExceedOperation
Specify the disposal way of the data packets those are transmitted beyond the rate.
Enumerationr/w
Enumerated Values:
0none
1discard
2remark-DSCP
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.7
tpAclActionConditionRemarkDscp
Specify the DSCP remarking value of the data packets when exceed-operation is set to reamrk-DSCP.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.8
tpAclActionQosRemarkDscp
Specify the DSCP region for the data packets those match the corresponding ACL.
Enumerationr/w
Enumerated Values:
0dscp0-be-000000
1dscp1
2dscp2
3dscp3
4dscp4
5dscp5
6dscp6
7dscp7
8dscp8-cs1-001000
9dscp9
10dscp10-af11-001010
11dscp11
12dscp12-af12-001100
13dscp13
14dscp14-af13-001110
15dscp15
16dscp16-cs2-010000
17dscp17
18dscp18-af21-010010
19dscp19
20dscp20-af22-010100
21dscp21
22dscp22-af23-010110
23dscp23
24dscp24-cs3-011000
25dscp25
26dscp26-af31-011010
27dscp27
28dscp28-af32-011100
29dscp29
30dscp30-af33-011110
31dscp31
32dscp32-cs4-100000
33dscp33
34dscp34-af41-100010
35dscp35
36dscp36-af42-100100
37dscp37
38dscp38-af43-100110
39dscp39
40dscp40-cs5-101000
41dscp41
42dscp42
43dscp43
44dscp44
45dscp45
46dscp46-ef-101110
47dscp47
48dscp48-cs6-110000
49dscp49
50dscp50
51dscp51
52dscp52
53dscp53
54dscp54
55dscp55
56dscp56-cs7-111000
57dscp57
58dscp58
59dscp59
60dscp60
61dscp61
62dscp62
63dscp63
64dscp64-noLimit
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.9
tpAclActionQosRemarkLocalPri
Specify the local priority for the data packets those match the corresponding ACL rule.
Enumerationr/w
Enumerated Values:
0tc0
1tc1
2tc2
3tc3
4tc4
5tc5
6tc6
7tc7
8default
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.10
tpAclActionQosRemark8021p
Specify the 802.1p priority for the data packets those match the corresponding ACL rule.
Enumerationr/w
Enumerated Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
8default
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.11
tpAclActionStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.3.1.1.12

tpAclPortBindTable

table
.1.3.6.1.4.1.11863.6.26.1.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpAclPortBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-MIB::tpAclPortBindTable' 
A list of ACL port binding entries.
Here you can bind an ACL to a port.
tpAclPortBindEntry row .1.3.6.1.4.1.11863.6.26.1.4.1.1
An entry contains of the information of ACL port binding.
Indexes
Column Syntax OID
tpAclPortBindAclId
The ACL ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.4.1.1.1
tpAclBindPortList
The port list that the ACL is bound to.
OctetStringr/w .1.3.6.1.4.1.11863.6.26.1.4.1.1.2
tpAclPortBindStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.4.1.1.3

tpAclVlanBindTable

table
.1.3.6.1.4.1.11863.6.26.1.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpAclVlanBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-ACL-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-ACL-MIB::tpAclVlanBindTable' 
A list of ACL vlan binding entries.
Here you can bind an ACL to a VLAN.
tpAclVlanBindEntry row .1.3.6.1.4.1.11863.6.26.1.5.2.1
An entry contains of the information of ACL vlan binding.
Indexes
Column Syntax OID
tpAclVlanBindAclId
The ACL ID or name.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.5.2.1.1
tpAclBindVlan
the vlan that the ACL is bound to, the vlan must be existed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.26.1.5.2.1.2
tpAclVlanBindStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.26.1.5.2.1.3