TPLINK-AAA-MIB Table View

Display the authentication method list the module use.

aaaApplicationListEntry row .1.3.6.1.4.1.11863.6.82.1.3.1.1

An entry contains of the information of methodlist the module use.

Indexes

moduleId

Column	Syntax	OID
moduleId Display the id of module.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11863.6.82.1.3.1.1.1
moduleName Display the name of module.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.1.3.1.1.2
loginList Display the login method list that the module use.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.1.3.1.1.3
enableList Display the enable method list that the module use.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.1.3.1.1.4

Display the authentication login method list.

authenticationLoginMethodListEntry row .1.3.6.1.4.1.11863.6.82.2.1.1

An entry contains of the information of method list.

Indexes

authenLoginListName

Column	Syntax	OID
authenLoginListName The name of method list.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.1.1.1
authenLoginPri1 The priority 1 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.1.1.2
authenLoginPri2 The priority 2 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.1.1.3
authenLoginPri3 The priority 3 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.1.1.4
authenLoginPri4 The priority 4 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.1.1.5
authenLoginStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.2.1.1.6

Display the authentication enable method list..

authenticationEnableMethodListEntry row .1.3.6.1.4.1.11863.6.82.2.2.1

An entry contains of the information of method list.

Indexes

authenEnableListName

Column	Syntax	OID
authenEnableListName The name of method list.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.2.1.1
authenEnablePri1 The priority 1 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.2.1.2
authenEnablePri2 The priority 2 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.2.1.3
authenEnablePri3 The priority 3 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.2.1.4
authenEnablePri4 The priority 4 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.2.2.1.5
authenEnableStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.2.2.1.6

Display the authentication dot1x method list.

authenticationDot1xMethodListEntry row .1.3.6.1.4.1.11863.6.82.3.1.1

An entry contains of the information of method list.

Indexes

authenDot1xListName

Column	Syntax	OID
authenDot1xListName The name of method list.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.3.1.1.1
authenDot1xPri1 The priority 1 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.3.1.1.2
authenDot1xStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatus Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.3.1.1.3

Display the accounting dot1x method list.

accountingDot1xMethodListEntry row .1.3.6.1.4.1.11863.6.82.3.2.1

An entry contains of the information of method list.

Indexes

acctDot1xListName

Column	Syntax	OID
acctDot1xListName The name of method list.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.3.2.1.1
acctDot1xPri1 The priority 1 method.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.11863.6.82.3.2.1.2
acctDot1xStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatus Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.3.2.1.3

RADIUS DEAMON is a server
used to authenticate the user,which is getting access to the NAS(Network 
Access Server).

radiusDeamonEntry row .1.3.6.1.4.1.11863.6.82.4.1

An entry contains of the information of a radius deamon.

Indexes

radiusDeamonServerIp

Column	Syntax	OID
radiusDeamonServerIp Enter the IP address of the RADIUS server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11863.6.82.4.1.1
radiusDeamonTimeout Enter the number of seconds the switch waits for a reply (1-9).	Integer32r/w Constraints: range: 1-9	.1.3.6.1.4.1.11863.6.82.4.1.2
radiusDeamonRetransimit Enter the number of times the switch will resend an authentication request to the RADIUS server (1-3).	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.11863.6.82.4.1.3
radiusDeamonKey Enter the encryption key used to authenticate logon access.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.11863.6.82.4.1.4
radiusDeamonAuthPort Enter the radius server port used for sending authentication packets (1-65535).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11863.6.82.4.1.5
radiusDeamonAcctPort Enter the radius server port used for sending authentication packets (1-65535).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11863.6.82.4.1.6
radiusDeamonNasId Enter the NAS identifier of radius packets.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.11863.6.82.4.1.7
radiusDeamonStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.4.1.8

TACACS(Terminal Access Controller Access Control System) DEAMON is a server
used to authenticate the user,which is getting access to the NAS(Network 
Access Server).

tacacsDeamonEntry row .1.3.6.1.4.1.11863.6.82.5.1

An entry contains of the information of a tacacs deamon.

Indexes

tacacsDeamonServerIp

Column	Syntax	OID
tacacsDeamonServerIp Enter the IP address of the TACACS+ server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11863.6.82.5.1.1
tacacsDeamonTimeout Enter the number of seconds the switch waits for a reply (1-10).	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.11863.6.82.5.1.2
tacacsDeamonKey Enter the encryption key used to authenticate logon access.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.11863.6.82.5.1.3
tacacsDeamonPort Enter the tacacs+ server port used for sending authentication packets (1-65535).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11863.6.82.5.1.4
tacacsDeamonStatus the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the…	TPLINK-TC-MIBTPRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.11863.6.82.5.1.5