TN-SAS-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
168

tnAccessEgressTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAccessEgressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnAccessEgressTable' 
Information about all Access-egress policies.
tnAccessEgressEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1
Access Egress QoS information for a particular port
Indexes
Column Syntax OID
tnAccessEgressIndex
the sap-egress policy ID is used as index for the table.
TAccessEgressPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.1
tnAccessEgressRowStatus
Row Status of this policy's entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.2
tnAccessEgressScope
scope of the sap-egress policy.
TN-TC-MIBTItemScoper/w
Type Values:
1exclusive
2template
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.3
tnAccessEgressDescription
user-supplied description of this sap-egress policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.4
tnAccessEgressLastChanged
timestamp of last change to this row in tnAccessEgressTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.5
tnAccessEgressRemark
This object specifies if the system
will remark the egress packets or not. DEf val is
TRUE for STU and FALSE for MTU
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.6
tnAccessEgressRemarkPolicyId
Remark Policy Id that be used when remarking is enabled.
TRemarkPolicyIDr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.7
tnAccessEgressRemarkType
This object specifies system remark type, tnAccessEgressRemark
will be set to true and tnAccessEgressRemarkType will specify the
remark type.
Enumerationr/w
Enumerated Values:
1use-dot1p
2use-dscp
3all
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.1.1.8

tnAccessEgressQueueTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAccessEgressQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnAccessEgressQueueTable' 
information about all access-egress policies' queues.
tnAccessEgressQueueEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1
Information about a particular sap-egress queue.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Indexes
Column Syntax OID
tnAccessEgressQueueIndex
the number of a queue. zero is not allowed.
for sap-egress, only three queues are allowed,
so the queue index range is restricted.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.1
tnAccessEgressQueueRowStatus
Row Status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.2
tnAccessEgressQueueCBS
The amount of reserved buffer space (in kilo bytes) for the queue.
TN-TC-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.3
tnAccessEgressQueueMBS
The maximum amount of buffer space (in kilo bytes) allowed for the
queue.
TN-TC-MIBTBurstSizer/w
Type Constraints:
range: -1..131072
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.4
tnAccessEgressQueuePIRAdaptation
The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.5
tnAccessEgressQueueCIRAdaptation
The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.6
tnAccessEgressQueueAdminPIR
The administrative PIR specified by the user.
TN-TC-MIBTPIRRater/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.7
tnAccessEgressQueueAdminCIR
The administrative CIR specified by the user.
TN-TC-MIBTCIRRater/w
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.8
tnAccessEgressQueueOperPIR
The administrative PIR specified by the user.
TN-TC-MIBTPIRRate
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.9
tnAccessEgressQueueOperCIR
The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding
adaptation rules.
TN-TC-MIBTCIRRate
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.10
tnAccessEgressQueueLastChanged
timestamp of last change to this row in tnAccessEgressQueueTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.2.1.11

tnAccessEgressFCTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAccessEgressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnAccessEgressFCTable'
tnAccessEgressFCEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1
Information about a particular access-egress policy's
forwarding class mappings to queues and dot1p values.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of non…
Indexes
Column Syntax OID
tnAccessEgressFCName
forwarding class name.
TN-TC-MIBTFCName .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.1
tnAccessEgressFCRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.2
tnAccessEgressFCQueue
The queue to use for packets in this forwarding class.
No FC can map to the same queue being used by 'premium' class.
You must specify a valid queue-id before setting the row status
to active.
TN-TC-MIBTEgressQueueIdr/w
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.3
tnAccessEgressFCDot1PInProfile
the Dot1p to use for in-profile traffic.
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.4
tnAccessEgressFCDot1POutProfile
the Dot1p to use for in-profile traffic.
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.5
tnAccessEgressFCLastChanged
timestamp of last change to this row in tnAccessEgressFCTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.6
tnAccessEgressFCDscpInProfile
The DSCP to use for in-profile traffic.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.7
tnAccessEgressFCDscpOutProfile
The DSCP to use for out-profile traffic.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.7.2.2.2.1.1.3.1.8

tnSapIngressMeterTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSapIngressMeterTable' 
Information about all sap-ingress policies' Meters.
tnSapIngressMeterEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1
Information about a particular meter for a sap-ingress policy.
Meter (1) is the used as a default for unicast and meter (11) is
used as a default for multicast. Both these are created by the
agent and can be edited but …
Indexes
Column Syntax OID
tnSapIngressMeter
The Meter ID is used as the secondary index to the table entry.
TN-TC-MIBTSapIngressMeterId
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.1
tnSapIngressMeterRowStatus
Row Status of the entry. This allows creation/deletion of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.2
tnSapIngressMeterMCast
This object specifies if this is a multicast meter or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.8
tnSapIngressMeterPIRAdaptation
The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.13
tnSapIngressMeterCIRAdaptation
The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.14
tnSapIngressMeterAdminPIR
The administrative PIR specified by the user.
TIngressPIRRater/w
Type Constraints:
range: -1..200000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.15
tnSapIngressMeterAdminCIR
The administrative CIR specified by the user.
TIngressCIRRater/w
Type Constraints:
range: -1..200000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.16
tnSapIngressMeterOperPIR
The operational value derived by computing the PIR value from
the administrative PIR value and their corresponding
adaptation rules.
TN-TC-MIBTPIRRate
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.17
tnSapIngressMeterOperCIR
The operational value derived by computing the CIR value from
the administrative CIR value and their corresponding
adaptation rules.
TN-TC-MIBTCIRRate
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.18
tnSapIngressMeterLastChanged
Timestamp of last change to this row in tnSapIngressMeterTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.19
tnSapIngressMeterMode
This object is not used on SAS platform currently
TN-TC-MIBTMeterModer/w
Type Values:
1priority
2profile
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.21
tnSapIngressMeterRateMode
Sap Ingress Meter Rate mode.The mode can be configured as
Two Rate Three Color Marker (trTCM) or Single Rate Three Color
Marker (srTCM). The mode command can be executed at anytime.
TMeterRateModer/w
Type Values:
1trtcm
2srtcm
3trtcm1
4trtcm2
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.22
tnSapIngressMeterAdminCBS
The administrative CBS specified by the user. The amount of
committed burst size (in kilo bits) for the meter.
TIngressBurstSizer/w
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.23
tnSapIngressMeterAdminMBS
The administrative MBS specified by the user. The maximum amount
of burst size (in kilo bits) allowed for the meter.
TIngressBurstSizer/w
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.24
tnSapIngressMeterOperCBS
The operational value derived by computing the CBS value from
the administrative CBS value
TIngressBurstSize
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.25
tnSapIngressMeterOperMBS
The operational value derived by computing the MBS value from
the administrative MBS value
TIngressBurstSize
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.1.1.26

tnSASSapIngressFCTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASSapIngressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASSapIngressFCTable' 
This table maintains the mapping of a particular
forwarding class traffic into the specified meter.
tnSASSapIngressFCEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1
Information about a particular sap-ingress policy's
forwarding class mappings to meters.
Indexes
No indexes recorded
Column Syntax OID
tnSapIngressFCMeter
The specific meter to be used for packets in this forwarding class.
A value of zero implies that the default meter should be used.
TN-TC-MIBTSapIngressMeterIdr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.1
tnSapIngressFCMCastMeter
The specific multicast meter to be used for packets in this forwarding
class. The meter is used only for specific entities and will be
ignored wherever it is irrelevant.

A value of zero implies that the d…
TN-TC-MIBTSapIngressMeterIdr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.2
tnSapIngressFCBCastMeter
The specific broadcast meter to be used for packets in this forwarding
class. The meter is used only for specific entities and will be
ignored wherever it is irrelevant.

A value of zero implies that the d…
TN-TC-MIBTSapIngressMeterIdr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.3
tnSapIngressFCUnknownMeter
The specific unknown destination meter to be used for packets in this
forwarding class. The meter is used only for specific entities and
will be ignored wherever it is irrelevant.

A value of zero implies …
TN-TC-MIBTSapIngressMeterIdr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.2.1.4

tnSapIngQosMeterStatsTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngQosMeterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSapIngQosMeterStatsTable' 
A table that contains ingress QoS meter SAP
statistics.
tnSapIngQosMeterStatsEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1
Ingress statistics about a specific SAP's
QoS meter.
Indexes
Column Syntax OID
tnSapIngQosMeterId
The index of the ingress QoS meter of
this SAP.
TN-TC-MIBTSapIngressMeterId
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.1
tnSapIngQosMeterStatsForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.10
tnSapIngQosMeterStatsForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.11
tnSapIngQosMeterStatsForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.12
tnSapIngQosMeterStatsForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.13
tnSapIngQosMeterStatsForwardedPackets
The number of packets forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.14
tnSapIngQosMeterStatsForwardedOctets
The number of octets forwarded
by the ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.15
tnSapIngQosMeterStatsDroppedPackets
The number of packets dropped by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.16
tnSapIngQosMeterStatsDroppedOctets
The number of octets dropped by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.3.1.17

tnSapIngressExtnTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.2.4 · 1 row entry · 9 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressExtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSapIngressExtnTable' 
.
tnSapIngressExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1
.
Indexes
No indexes recorded
Column Syntax OID
tnSapIngressNumQosClassifiers
The number of ingress QoS classifiers to be allocated
to the SAP on which this policy is applied. The number
of QoS classifiers required by a SAP ingress QoS policy
should be less than or equal to its tnSapIngressNumQos…
Unsigned32r/w
Constraints:
range: 2-256
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.1
tnSapIngressQosClassifiersRequiredInVpls
This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required for a
VPLS SAP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.4
tnSapIngressQosClassifiersRequiredInEpipe
This value indicates the number of ingress QoS classifiers
required when this policy is applied on a SAP. This value is
calculated based on the number of classifiers required for a
EPIPE SAP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.5
tnSapIngressQosMetersRequiredInVpls
This value indicates the number of ingress QoS meters required
when this policy is applied on a SAP. This value is calculated
based on the number of meters required for a VPLS SAP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.6
tnSapIngressQosMetersRequiredInEpipe
This value indicates the number of ingress QoS meters required
when this policy is applied on a SAP. This value is calculated
based on the number of meters required for a EPIPE SAP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.7
tnSapIngressIPCriteriaMatch
This object specifies the basic match criteria as 'any' or 'dscp-only'
based on ip. The default value is 'dscp-only'
Enumerationr/w
Enumerated Values:
1any
2dscp-only
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.8
tnSapIngressMacCriteriaMatch
This object specifies the basic match criteria as 'any' or 'dot1p-only'
based on Mac Address. The default value is 'any'
Enumerationr/w
Enumerated Values:
1any
2dot1p-only
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.9
tnSapIngressIPv6CriteriaEnable
tnSapIngressIPv6CriteriaEnable is a boolean
flag which allows/disallows configuring match criteria
based on ipv6 address
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.10
tnSapIngressIPv6CriteriaMatch
This object specifies the basic match criteria as 'any' or 'dscp-only'
based on ipv6. The default value is 'dscp-only'
Enumerationr/w
Enumerated Values:
1any
2dscp-only
 .1.3.6.1.4.1.7483.7.2.2.2.1.2.4.1.11

tnNetworkIngressFCTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkIngressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnNetworkIngressFCTable' 
This table maintains the mapping of a particular
forwarding class traffic into the specified meter.
tnNetworkIngressFCEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1
Information about a particular network-ingress policy's
forwarding class mappings to meter.

Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
Indexes
Column Syntax OID
tnNetworkIngressFCName
tnNetworkIngressFCName specifies the forwarding class
for which this mapping is defined.
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.1
tnNetworkIngressFCRowStatus
Row Status for this Entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.2
tnNetworkIngressFCMeter
The specific meter to be used for packets in this forwarding class.
A value of zero implies that the default meters should be used.
TN-TC-MIBTNetworkIngressMeterIdr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.3
tnNetworkIngressFCMCastMeter
The specific multicast meter to be used for packets in this forwarding
class. The meter is used only for specific entities and will be
ignored wherever it is irrelevant.

A value of zero implies that the d…
TN-TC-MIBTNetworkIngressMeterIdr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.4
tnNetworkIngressFCLastChanged
tnNetworkIngressFCLastChanged indicates the value of sysUpTime
when the forwarding class entry was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.1.1.5

tnNetworkIngressMeterTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.3.2 · 1 row entry · 16 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkIngressMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnNetworkIngressMeterTable' 
information about all network policies' meters.
tnNetworkIngressMeterEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1
Information about a particular meter for a network policy.
Meter (1) is the used as a default for unicast and meter (9) is
used as a default for multicast. Both these are created by the
agent and can be edited but not r…
Indexes
Column Syntax OID
tnNetworkIngressMeterIndex
The Meter ID is used as the secondary index to the table entry.
TN-TC-MIBTNetworkIngressMeterId
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.1
tnNetworkIngressMeterRowStatus
Row Status of the entry. This allows creation/deletion of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.2
tnNetworkIngressMeterCIRAdaptation
The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.5
tnNetworkIngressMeterPIRAdaptation
The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.
TN-TC-MIBTAdaptationRuler/w
Type Values:
1max
2min
3closest
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.6
tnNetworkIngressMeterAdminPIR
The administrative PIR specified by the user.
TIngressPIRRater/w
Type Constraints:
range: -1..200000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.7
tnNetworkIngressMeterAdminCIR
The administrative CIR specified by the user.
TIngressCIRRater/w
Type Constraints:
range: -1..200000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.8
tnNetworkIngressMeterOperPIR
The operational value derived by computing the PIR value from
the administrative PIR value and their corresponding
adaptation rules.
TN-TC-MIBTPIRRate
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.9
tnNetworkIngressMeterOperCIR
The operational value derived by computing the CIR value from
the administrative CIR value and their corresponding
adaptation rules.
TN-TC-MIBTCIRRate
Type Constraints:
range: -1..100000000
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.10
tnNetworkIngressMeterLastChanged
Timestamp of last change to this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.11
tnNetworkIngressMeterMode
Network Ingress Meter Mode
TN-TC-MIBTMeterModer/w
Type Values:
1priority
2profile
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.12
tnNetworkIngressMeterMCast
This object specifies if this is a multicast meter or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.13
tnNetworkIngressMeterRateMode
Network Ingress Meter Rate mode.The mode can be configured
as Two Rate Three Color Marker (trTCM) or Single Rate Three
Color Marker (srTCM). The mode command can be executed at
anytime.
TMeterRateModer/w
Type Values:
1trtcm
2srtcm
3trtcm1
4trtcm2
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.14
tnNetworkIngressMeterAdminCBS
The administrative CBS specified by the user. The amount of
committed burst size (in kilo bits) for the meter.
TIngressBurstSizer/w
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.15
tnNetworkIngressMeterAdminMBS
The administrative MBS specified by the user. The maximum amount
of burst size (in kilo bits) allowed for the meter.
TIngressBurstSizer/w
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.16
tnNetworkIngressMeterOperCBS
The operational value derived by computing the CBS value from
the administrative CBS value
TIngressBurstSize
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.17
tnNetworkIngressMeterOperMBS
The operational value derived by computing the MBS value from
the administrative MBS value
TIngressBurstSize
Type Constraints:
range: -1
range: 1..2146959
 .1.3.6.1.4.1.7483.7.2.2.2.1.3.2.1.26

tnSASSlopePolicyExtnTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.4.1 · 1 row entry · 18 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASSlopePolicyExtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASSlopePolicyExtnTable' 
Slope Policy Table. Additions for sas platform
tnSASSlopePolicyExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1
Slope Policy Entry additions for sas platform.
Indexes
No indexes recorded
Column Syntax OID
tnSlopeHiQueue1DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.1
tnSlopeHiQueue2DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.2
tnSlopeHiQueue3DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.3
tnSlopeHiQueue4DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.4
tnSlopeHiQueue5DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.5
tnSlopeHiQueue6DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.6
tnSlopeHiQueue7DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.7
tnSlopeHiQueue8DropRate
High Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.8
tnSlopeLoQueue1DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.9
tnSlopeLoQueue2DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.10
tnSlopeLoQueue3DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.11
tnSlopeLoQueue4DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.12
tnSlopeLoQueue5DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.13
tnSlopeLoQueue6DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.14
tnSlopeLoQueue7DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.15
tnSlopeLoQueue8DropRate
Low Queue Drop Rate
TSlopeDropRater/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.16
tnSlopeHiStartThreshold
High slope Start Threshold.This object implies that once the
shared buffer utilization reaches the start-threshold
level then high-priority packets egressing out from
a particular queue would be dropped at configured dr…
TSlopeThresholdr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.17
tnSlopeLoStartThreshold
Low slope Start Threshold.This implies that once the
shared buffer utilization reaches the start-threshold
level then low-priority packets egressing out from a
particular queue would be dropped at configured drop
rate.
TSlopeThresholdr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.1.1.18

tnSlopePolicyQueueTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.4.2 · 1 row entry · 16 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSlopePolicyQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSlopePolicyQueueTable' 
Slope Policy Per Queue Per Port additions for SAS-M platform.
In SAS-M there are three slopes associated with a queue.
One slope for Tcp Green packets, one for Tcp Yellow packets
and one for Non Tcp Packets(both green and yellow packets).
Each slope in turn can have four parameters defining its
behavior
tnSlopePolicyQueueEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1
.
Indexes
Column Syntax OID
tnSlopePolicyQueueId
Queue for which slope policy is being defined
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.1
tnSlopePolicyQueueRowStatus
Row Status of the entry. This allows creation/deletion of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.2
tnSlopePolicyQueueLastChanged
Timestamp of last change to this row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.3
tnSlopePolicyQueueHiAdminStatus
tnSlopePolicyQueueHiAdminStatus specifies the admin state for the queue's
high profile (Tcp Green Packets )slope. If the tnSlopePolicyQueueHiAdminStatus
is set to 'down',the slope is inactive.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.4
tnSlopePolicyQueueHiStartAverage
The percentage of the buffer utilized after which the drop probability
starts to rise above 0.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.5
tnSlopePolicyQueueHiMaxAverage
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.6
tnSlopePolicyQueueHiMaxProbability
High Profile Max Probability.Defines the slope between the
Start Average and Max Average
TMaxProbabilityr/w
Type Constraints:
range: 0..10
range: 25
range: 50
range: 75
range: 100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.7
tnSlopePolicyQueueLoAdminStatus
tnSlopePolicyQueueLoAdminStatus specifies the admin state for the queue's
low profile (Tcp Yellow Packets )slope. If the tnSlopePolicyQueueLoAdminStatus
is set to 'down',the slope is inactive.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.8
tnSlopePolicyQueueLoStartAverage
The percentage of the buffer utilized after which the drop probability
starts to rise above 0.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.9
tnSlopePolicyQueueLoMaxAverage
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.10
tnSlopePolicyQueueLoMaxProbability
Low Profile Max Probability.Defines the slope between the
Start Average and Max Average
TMaxProbabilityr/w
Type Constraints:
range: 0..10
range: 25
range: 50
range: 75
range: 100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.11
tnSlopePolicyQueueNonTcpAdminStatus
tnSlopePolicyQueueNonTcpAdminStatus specifies the admin state for the queue's
non tcp profile (Non Tcp Packets )slope. If the tnSlopePolicyQueueNonTcpAdminStatus
is set to 'down',the slope is inactive.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.12
tnSlopePolicyQueueNonTcpStartAverage
The percentage of the buffer utilized after which the drop probability
starts to rise above 0.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.13
tnSlopePolicyQueueNonTcpMaxAverage
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.14
tnSlopePolicyQueueNonTcpMaxProbability
Non Tcp Profile Max Probability.Defines the slope between the
Start Average and Max Average
TMaxProbabilityr/w
Type Constraints:
range: 0..10
range: 25
range: 50
range: 75
range: 100
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.15
tnSlopePolicyQueueTimeAvgFactor
The time average factor describes the weighting between the previous
shared buffer average utilization result and the new shared buffer
utilization in determining the new shared buffer average utilization.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.7483.7.2.2.2.1.4.2.1.16

tnSASPortSchedulerPlcyTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.5.1 · 1 row entry · 10 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASPortSchedulerPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASPortSchedulerPlcyTable' 
The tnSASPortSchedulerPlcyTable has an entry for each port scheduler
configured on this system.
tnSASPortSchedulerPlcyEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1
Each row represents a particular port scheduler. Entries are created
and deleted by the user.
Indexes
No indexes recorded
Column Syntax OID
tnPortSchedulerPlcyMode
Port Scheduler Policy Mode
TN-TC-MIBTPlcyModer/w
Type Values:
0none
1roundRobin
2weightedRoundRobin
3weightedDeficitRoundRobin
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.1
tnPortSchedulerPlcyQuanta
Port Scheduler Policy Quanta
TPlcyQuantar/w .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.2
tnPortSchedulerPlcyQueue1Weight
Port Scheduler Policy Queue 1 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.3
tnPortSchedulerPlcyQueue2Weight
Port Scheduler Policy Queue 2 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.4
tnPortSchedulerPlcyQueue3Weight
Port Scheduler Policy Queue 3 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.5
tnPortSchedulerPlcyQueue4Weight
Port Scheduler Policy Queue 4 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.6
tnPortSchedulerPlcyQueue5Weight
Port Scheduler Policy Queue 5 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.7
tnPortSchedulerPlcyQueue6Weight
Port Scheduler Policy Queue 6 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.8
tnPortSchedulerPlcyQueue7Weight
Port Scheduler Policy Queue 7 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.9
tnPortSchedulerPlcyQueue8Weight
Port Scheduler Policy Queue 8 Weight
TN-TC-MIBTQWeightr/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.1.1.10

tnSASPortPreemptSchedulerPlcyTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.5.2 · 1 row entry · 8 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASPortPreemptSchedulerPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASPortPreemptSchedulerPlcyTable' 
The tnSASPortPreemptSchedulerPlcyTable has an entry for each port scheduler
configured on this system.
tnSASPortPreemptSchedulerPlcyEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1
Each row represents a Preempt mode for particular port scheduler. Entries are created
and deleted by the user.
Indexes
Column Syntax OID
tnPortSchedulerPlcyQueue1Preempt
Port Scheduler Policy Queue 1 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.1
tnPortSchedulerPlcyQueue2Preempt
Port Scheduler Policy Queue 2 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.2
tnPortSchedulerPlcyQueue3Preempt
Port Scheduler Policy Queue 3 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.3
tnPortSchedulerPlcyQueue4Preempt
Port Scheduler Policy Queue 4 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.4
tnPortSchedulerPlcyQueue5Preempt
Port Scheduler Policy Queue 5 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.5
tnPortSchedulerPlcyQueue6Preempt
Port Scheduler Policy Queue 6 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.6
tnPortSchedulerPlcyQueue7Preempt
Port Scheduler Policy Queue 7 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.7
tnPortSchedulerPlcyQueue8Preempt
Port Scheduler Policy Queue 8 Preempt
TN-TC-MIBTQPreemptr/w
Type Values:
0express
1preemptable
 .1.3.6.1.4.1.7483.7.2.2.2.1.5.2.1.8

tnQosFrameBasedAccntTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.6.3 · 1 row entry · 2 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnQosFrameBasedAccntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnQosFrameBasedAccntTable' 
A row in this table indicates whether Frame based
accounting is enabled in the ingress and egress
directions.
tnQosFrameBasedAccntEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1
An entry indicating the ingress or egress state for
frame based accounting.
Indexes
Column Syntax OID
tnQosIngressFrameBasedAccnt
This object is used to enable frame based accounting for all
the ingress meters in use by the pack. When this is enabled
the ingress meters account for the IFG (12 bytes) + SFD (8 bytes)
overhead associated with Ethern…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1.1
tnQosEgressFrameBasedAccnt
This object is used to enable frame based accounting for all
the egress queue shapers and the port egress rate shaper in
use by the pack. When this is enabled the shapers account for
the IFG (12 bytes) + SFD (8 bytes) …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.7.2.2.2.1.6.3.1.2

tnNetworkPolicyExtnTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.7.1 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkPolicyExtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnNetworkPolicyExtnTable' 
Extension table to tnNetworkPolicyTable
tnNetworkPolicyExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1
.
Indexes
No indexes recorded
Column Syntax OID
tnNetworkPolicyType
Network policy Type determines the point of attachment of the
network qos policy. Network policy with 'ipInterface' type can be
attached to ip interface and 'port' type can be attached to
physical port
TNetworkPolicyTyper/w
Type Values:
1ipInterface
2port
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.1
tnNetworkPolicyRemarkPolicyId
Remark Policy Id that be used.
TRemarkPolicyIDr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.2
tnNetworkIngressMeterColorMode
tnNetworkIngressMeterColorMode indicates whether the ip interface is
color-aware or color-blind. By default every ip interface is color-aware
Enumerationr/w
Enumerated Values:
1color-aware
2color-blind
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.3
tnNetworkIngressMplsLspExpProfile
tnNetworkIngressMplsLspExpProfile attaches the MPLS LSP EXP Profile to
this network policy.
TN-TC-MIBTMplsLspExpProfMapIDr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.4
tnNetworkEgressRemarkType
This object specifies system remark type, tnNetworkPolicyEgressRemark
will be set to true and tnNetworkEgressRemarkType will specify the
remark type.
Enumerationr/w
Enumerated Values:
1use-dot1p
2use-dscp
3all
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.1.1.5

tnNetworkQueueExtnTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.7.2 · 1 row entry · 1 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkQueueExtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnNetworkQueueExtnTable' 
Extension table to tnNetworkQueueTable
tnNetworkQueueExtnEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.7.2.1
.
Indexes
No indexes recorded
Column Syntax OID
tnNetworkQueuePolicyName
NetworkQueuePolicyName determines the queue management policy
attached to this network queue.
TN-TC-MIBTNamedItemr/w
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.7483.7.2.2.2.1.7.2.1.1

tMplsLspExpProfMapTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.8.1 · 1 row entry · 4 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tMplsLspExpProfMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tMplsLspExpProfMapTable' 
Information about all MPLS LSP EXP Profiles.
tMplsLspExpProfMapEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1
Information about one MPLS LSP EXP Profile
Indexes
Column Syntax OID
tMplsLspExpProfMapIndex
The tMplsLspExpProfMapIndex is used as index for the table.
TN-TC-MIBTMplsLspExpProfMapID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.1
tMplsLspExpProfMapRowStatus
Row Status of this profile entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.2
tMplsLspExpProfMapDescription
User-provided description of the policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.3
tMplsLspExpProfMapLastChanged
timestamp of last change to this row in tMplsLspExpProfMapTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.1.1.4

tMplsLspExpProfileTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.8.4 · 1 row entry · 4 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tMplsLspExpProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tMplsLspExpProfileTable'
tMplsLspExpProfileEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1
Information about MPLS LSP EXP mapping.
Indexes
Column Syntax OID
tMplsLspExpProfileBits
The MPLS Exp value to use for MPLS traffic.
TMplsLspExpProfileValue
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.1
tMplsLspExpProfileRowStatus
Row Status of this profile entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.2
tMplsLspExpProfile
tMplsLspExpProfile specifies the profile to be used for this
EXP value as indicated by tMplsLspExpProfileBits.
r/w .1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.3
tMplsLspExpProfileLastChanged
timestamp of last change to this row in tMplsLspExpProfileTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.8.4.1.4

tnSASRemarkPolicyTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.21.1 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASRemarkPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASRemarkPolicyTable'
tnSASRemarkPolicyEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1
Information about a particular remarking policy's
forwarding class mappings to dot1p / dscp / exp
values.
Entries are created/deleted by user.
Indexes
Column Syntax OID
tnSASRemarkPolicyId
The remark policy ID is used as index for the table.
TRemarkPolicyID
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.1
tnSASRemarkPolicyRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.2
tnSASRemarkPolicyDescription
User-provided description of the policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.3
tnSASRemarkPolicyType
The remarking type of this policy. This specifies which
of the fields will be remarked.
Enumerationr/w
Enumerated Values:
1dot1p
2dscp
3lsp-exp
4dot1p-dscp
5dot1p-lsp-exp-shared
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.4
tnSASRemarkPolicyLastChanged
Timestamp of last change to this row in tnSASRemarkPolicyTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.1.1.5

tnSASRemarkPolicyFCTable

table
.1.3.6.1.4.1.7483.7.2.2.2.1.21.2 · 1 row entry · 9 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSASRemarkPolicyFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAS-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAS-QOS-MIB::tnSASRemarkPolicyFCTable'
tnSASRemarkPolicyFCEntry row .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1
Information about a particular queue in a remarking policy's
forwarding class mappings to dot1p / dscp / exp
values.
Entries are created/deleted whenever a policy is created/deleted.
Indexes
Column Syntax OID
tnSASRemarkPolicyFCName
The FC Class Name.
TN-TC-MIBTFCName .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.1
tnSASRemarkPolicyDot1PInProfile
The Dot1p to use for in-profile traffic. This field is valid
only for the following remarking types:
dot1p
dot1p-dscp
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.2
tnSASRemarkPolicyDot1POutProfile
The Dot1p to use for out-of-profile traffic. This field is valid
only for the following remarking types:
dot1p
dot1p-dscp
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.3
tnSASRemarkPolicyDSCPInProfile
The DSCP to use for in-profile traffic. This field is valid
only for remarking type of dscp and dot1p-dscp.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.4
tnSASRemarkPolicyDSCPOutProfile
The DSCP to use for out-of-profile traffic. This field is valid
only for remarking type of dscp and dot1p-dscp.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.5
tnSASRemarkPolicyLspExpInProfile
The lsp-exp value to use for in-profile traffic. This field is
valid only for remarking type of lsp-exp.
TN-TC-MIBTLspExpValuer/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.6
tnSASRemarkPolicyLspExpOutProfile
The lsp-exp value to use for out-of-profile traffic. This field is
valid only for remarking type of lsp-exp.
TN-TC-MIBTLspExpValuer/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.7
tnSASRemarkPolicyDot1PLspExpInProfile
The Dot1p / MPLS Exp value to use for in-profile traffic.
This field is valid only for remarking type of dot1p-lsp-exp-shared.
TDot1PLspExpValuer/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.8
tnSASRemarkPolicyDot1PLspExpOutProfile
The Dot1p / MPLS Exp value to use for out-profile traffic.
This field is valid only for remarking type of dot1p-lsp-exp-shared.
TDot1PLspExpValuer/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.7483.7.2.2.2.1.21.2.1.9