TN-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
13
Rows
13
Columns
189
.1.3.6.1.4.1.7483.6.1.2.16.3.1 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSapIngressTable'
tnSapIngressEntry row .1.3.6.1.4.1.7483.6.1.2.16.3.1.1
Information about a particular Sap Ingress Policy.

sap-ingress policy (1) is the default entry.

Default Entry is created by the agent, other entries are
created by user.

Default En…
Column Syntax OID
the policy ID is the index to this table.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.1
Row Status for the policy. The deletion of this row has
an action of removing the dependent rows in the following
tables :
- tnSapIngressQueueTable
- tnSapIngressDSCPTable
- tnSapIngressDot1pTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.2
Scope of the policy. If the scope is 'exclusive', it can only be
instantiated once whereas it could have multiple instances if defined
as 'exclusive'.
TN-TC-MIBTItemScoper/w
Type Values:
1exclusive
2template
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.3
user-provided description of the policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.4
tnSapIngressDefaultFC specifies the forwarding class or the
sub forwarding class which should be used for all traffic that
does not match a specific classification specified in this
SAP ingress QoS policy.
TN-TC-MIBTNamedItemr/w
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.5
the priority to assign to traffic ingressing as the default
action queue.
TN-TC-MIBTPriorityr/w
Type Values:
1low
2high
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.6
indicates which type of match criteria the policy should use.
when set to ip(1), the policy looks for match entries in
tnSapIngressIPCriteriaTable or tnSapIngressIPv6CriteriaTable.
When set to mac(2), the policy looks f…
TN-TC-MIBTMatchCriteria
Type Values:
1ip
2mac
3none
4dscp
5dot1p
6prec
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.7
timestamp of last change to this row in tnSapIngressTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.8
The value of tnSapIngressHsmdaPacketOffset specifies the
value, in bytes, of the adjustment to make to the size of each
packet for HSMDA queue accounting.
bytesTN-TC-MIBTIngressHsmdaPerPacketOffsetr/w
Type Constraints:
range: -32..31
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.9
The value of the object tnSapIngressDefFCHsmdaCntrOvr specifies
the counter to use for all traffic that does not match a specific
classification specified in this SAP ingress QoS policy.

A value of zero i…
TN-TC-MIBTIngressHsmdaCounterIdOrZeror/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.10
tnSapIngressMacCritType specifies which type of entries this mac filter
can contain.

If tnSapIngressMacCritType is set to 'normal(1)', all match criteria
are accepted except the criteria mentioned below t…
TN-TC-MIBTMacFilterTyper/w
Type Values:
1normal
2isid
3vid
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.11
The value of tnSapIngressPolicyName specifies the name to associate
with this policy.
TN-TC-MIBTLNamedItemOrEmptyr/w
Type Constraints:
range: 0..64
.1.3.6.1.4.1.7483.6.1.2.16.3.1.1.12
.1.3.6.1.4.1.7483.6.1.2.16.3.5 · 1 row entry · 20 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressIPCriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSapIngressIPCriteriaTable'
information about all sap-ingress policies' ip-criteria entries.
tnSapIngressIPCriteriaEntry row .1.3.6.1.4.1.7483.6.1.2.16.3.5.1
Information about a particular ip-criteria entry for a sap-ingress
policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Column Syntax OID
unique identifier separates this entry from others in this
policy.
TN-TC-MIBTEntryId
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.1
Row Status for the IP Criteria entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.2
description of this IP criteria entry.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.3
tnSapIngressIPCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the
traffic that matches the specific IP criteria.

Specification of a sub forwarding cl…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.4
priority for packets which match this entry's criteria.

when set to default, the packet is sent to the queue
from DSCP/dot1p/FC which matched the packet, using the
priority from the DSCP/dot1p/FC which ma…
TN-TC-MIBTPriorityOrDefaultr/w
Type Values:
1low
2high
3default
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.5
IP address to match with source-IP of the packet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.6
the prefix is the number of bits of the source IP address to match.
TN-TC-MIBIpAddressPrefixLengthr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.7
IP address to match with destination-IP of the packet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.8
the prefix is the number of bits of the destination IP address to
match.
TN-TC-MIBIpAddressPrefixLengthr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.9
IP protocol to match. use -1 to disable matching by IP protocol.
TN-TC-MIBTIpProtocolr/w
Type Constraints:
range: -2..255
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.10
TCP/UDP port value1. The value of this object is used according
to the description for tnSapIngressIPCriteriaSourcePortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.11
TCP/UDP port value2. The value of this object is used according
to the description for tnSapIngressIPCriteriaSourcePortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.12
The operator specifies the manner in which
tnSapIngressIPCriteriaSourcePortValue1 and
tnSapIngressIPCriteriaSourcePortValue2 are to be used. The value
of these latter 2 objects and
tnSapIngressIPCriteriaSourcePortOperat…
TN-TC-MIBTTcpUdpPortOperatorr/w .1.3.6.1.4.1.7483.6.1.2.16.3.5.1.13
TCP/UDP port value1. The value of this object is used according
to the description for tnSapIngressIPCriteriaDestPortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.14
TCP/UDP port value2. The value of this object is used according
to the description for tnSapIngressIPCriteriaDestPortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.15
The operator specifies the manner in which
tnSapIngressIPCriteriaDestPortValue1 and
tnSapIngressIPCriteriaDestPortValue2 are to be used. The value
of these latter 2 objects and
tnSapIngressIPCriteriaDestPortOperator is …
TN-TC-MIBTTcpUdpPortOperatorr/w .1.3.6.1.4.1.7483.6.1.2.16.3.5.1.16
DSCP value to match in the packet
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.16.3.5.1.17
matches when the packet is a fragment (true)
or when the packet is not a fragment (false)
or matches all packets fragmented or not (off).
TN-TC-MIBTItemMatchr/w
Type Values:
1off
2false
3true
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.19
timestamp of last change to this row in tnSapIngressIPCriteriaTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.20
The value of the object tnSapIngressIPCritHsmdaCntrOvr specifies
the Hsmda counter to use for matching packets. This value will be
ignored when the sap-ingress policy specified by tnSapIngressIndex,
is applied to a SAP …
TN-TC-MIBTIngressHsmdaCounterIdOrZeror/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.3.5.1.21
.1.3.6.1.4.1.7483.6.1.2.16.3.6 · 1 row entry · 20 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressMacCriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSapIngressMacCriteriaTable'
information about all sap-ingress policies' mac-criteria entries.
tnSapIngressMacCriteriaEntry row .1.3.6.1.4.1.7483.6.1.2.16.3.6.1
Information about a particular mac-criteria entry
for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Column Syntax OID
.
TN-TC-MIBTEntryId
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.1
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.2
.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.3
tnSapIngressMacCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the
traffic that matches the specific Mac criteria.

Specification of a sub forwarding …
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.4
.
TN-TC-MIBTPriorityOrDefaultr/w
Type Values:
1low
2high
3default
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.5
The type of mac frame for which we are defining this match criteria.
TN-TC-MIBTFrameTyper/w
Type Values:
0e802dot3
1e802dot2LLC
2e802dot2SNAP
3ethernetII
5atm
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.6
.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.8
.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.9
.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.10
.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.11
.
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.12
.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.13
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
Integer32r/w
Constraints:
range: 1536-65535
range: -1--1
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.14
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
TN-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.15
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
TN-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.16
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
TN-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.17
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
TN-TC-MIBServiceAccessPointr/w
Type Constraints:
range: -1..255
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.18
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry.
Integer32r/w
Constraints:
range: -1-65535
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.19
whether to match snap-oui, and what to match.
Enumerationr/w
Enumerated Values:
1off
2zero
3nonZero
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.20
timestamp of last change to this row in tnSapIngressMacCriteriaTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.3.6.1.21
.1.3.6.1.4.1.7483.6.1.2.16.3.7 · 1 row entry · 22 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSapIngressFCTable'
This table maintains the mapping of a particular
forwarding class traffic into the specified queue.
tnSapIngressFCEntry row .1.3.6.1.4.1.7483.6.1.2.16.3.7.1
Information about a particular sap-ingress policy's
forwarding class mappings to queues.

Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
Column Syntax OID
tnSapIngressFCName specifies the forwarding class or the sub
forwarding class for which this mapping is defined.

A sub forwarding class mapping can also be configured. The
format of a sub forwarding class…
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.1
Row Status for this queue.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.2
The specific queue to be used for packets in this forwarding class.

Default value for this object along with default value for
tnSapIngressFCQGrp implies that the default queues should be used.
TN-TC-MIBTIngressQueueIdr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.3
The specific multicast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be
ignored wherever it is irrelevant.

Default value for this object alon…
TN-TC-MIBTIngressQueueIdr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.4
The specific broadcast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be
ignored wherever it is irrelevant.

Default value for this object alon…
TN-TC-MIBTIngressQueueIdr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.5
The specific unknown destination queue to be used for packets in this
forwarding class. The queue is used only for specific entities and
will be ignored wherever it is irrelevant.

Default value for this o…
TN-TC-MIBTIngressQueueIdr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.6
tnSapIngressFCLastChanged indicates the value of sysUpTime
when the forwarding class entry was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.7
tnSapIngressFCInProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues.
TN-TC-MIBTRemarkTyper/w
Type Values:
1none
2dscp
3precedence
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.8
tnSapIngressFCInProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile
remarking type, tnSapIngressFCInProfRemark is specified to be
'dscp'.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.9
tnSapIngressFCInProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile
remarking type, tnSapIngressFCInProfRemark is specified to be
'precedence'.
TN-TC-MIBTPrecValueOrNoner/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.10
tnSapIngressFCOutProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues.
TN-TC-MIBTRemarkTyper/w
Type Values:
1none
2dscp
3precedence
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.11
tnSapIngressFCOutProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile
remarking type, tnSapIngressFCOutProfRemark is specified to be
'dscp'.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.12
tnSapIngressFCOutProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile
remarking type, tnSapIngressFCOutProfRemark is specified to be
'precedence'.
TN-TC-MIBTPrecValueOrNoner/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.13
tnSapIngressFCProfile specifies the profile of the packets
associated with this forwarding class.

This object can not be set to anything but 'none' if the
queues being used by this mapping do not have the…
TN-TC-MIBTProfileOrNoner/w
Type Values:
0none
1in
2out
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.14
The value of the object tnSapIngressFCHsmdaQueue specifies the
HSMDA queue to use for packets in this forwarding class. This
mapping will be used when the SAP is on a HSMDA MDA.
A value of zero implies that the default …
TN-TC-MIBTIngressHsmdaQueueIdr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.15
The value of the object tnSapIngressFCHsmdaMCastQueue specifies the
multicast queue to use for packets in this forwarding class. This
mapping will be used when the SAP is on a HSMDA MDA.
A value of zero implies that the…
TN-TC-MIBTIngressHsmdaQueueIdr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.16
The value of the object tnSapIngressFCHsmdaBCastQueue specifies the
broadcast queue to use for packets in this forwarding class. This
mapping will be used when the SAP is on a HSMDA MDA.
A value of zero implies that the…
TN-TC-MIBTIngressHsmdaQueueIdr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.17
The value of tnSapIngressFCDE1OutOfProfile specifies whether frames
with DE value of '1' are to be treated as out-of-profile (as if
tnSapIngressFCProfile was set to 'out').

When tnSapIngressFCDE1OutOfProf…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.18
tnSapIngressFCQGrp specifies the tnQosIngQGroupName.

This object must be set along with tnSapIngressFCQueue object.
An 'inconsistentValue' error is returned if this object is set to the
default and other …
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.19
tnSapIngressFCQGrpMCast specifies the tnQosIngQGroupName.

This object must be set along with tnSapIngressFCMCastQueue object.
An 'inconsistentValue' error is returned if this object is set to the
default …
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.20
tnSapIngressFCQGrpBCast specifies the tnQosIngQGroupName.

This object must be set along with tnSapIngressFCBCastQueue object.
An 'inconsistentValue' error is returned if this object is set to the
default …
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.21
tnSapIngressFCQGrpUnknown specifies the tnQosIngQGroupName.

This object must be set along with tnSapIngressFCUnknownQueue object.
An 'inconsistentValue' error is returned if this object is set to the
defa…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.7.1.22
.1.3.6.1.4.1.7483.6.1.2.16.3.9 · 1 row entry · 18 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapIngressIPv6CriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSapIngressIPv6CriteriaTable'
Information about all sap-ingress policies' ipv6-criteria entries.
tnSapIngressIPv6CriteriaEntry row .1.3.6.1.4.1.7483.6.1.2.16.3.9.1
Information about a particular ipv6-criteria entry for a sap-ingress
policy.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Column Syntax OID
The value of the object tnSapIngressIPv6CriteriaIndex specifies
uniquely each entry in the policy.
TN-TC-MIBTEntryId
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.1
The value of the object tnSapIngressIPv6CriteriaRowStatus specifies the
Row Status for the IPv6 Criteria entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.2
The value of the object tnSapIngressIPv6CriteriaDescription specifies
an optional user provided description of this IPv6 criteria entry.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.3
The value of the object tnSapIngressIPv6CriteriaActionFC specifies the
forwarding class or the sub forwarding class to be used to classify
all the traffic that matches the specific IPv6 criteria.

Specific…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.4
The value of the object tnSapIngressIPv6CriteriaActionPriority specifies
the priority for packets which match this entry's criteria.
When set to 'default', the packet is sent to the queue
from DSCP/dot1p/FC which matche…
TN-TC-MIBTPriorityOrDefaultr/w
Type Values:
1low
2high
3default
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.5
The value of the object tnSapIngressIPv6CriteriaSourceIpAddr specifies
the IPv6 address to match with source-IPv6 of the packet.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.6
The value of the object tnSapIngressIPv6CriteriaSourceIpMask specifies
the prefix is the number of bits of the source IPv6 address to match.
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.7
The value of the object tnSapIngressIPv6CriteriaDestIpAddr specifies
the IPv6 address to match with destination-IPv6 of the packet.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.8
The value of the object tnSapIngressIPv6CriteriaDestIpMask specifies
the prefix is the number of bits of the destination IPv6 address to
match.
Unsigned32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.9
The value of the object tnSapIngressIPv6CriteriaNextHeader specifies
the Next Header to match. use -1 to disable matching by Next Header.
Because the match criteria only pertains to the last next-header, the
following …
TN-TC-MIBTIpProtocolr/w
Type Constraints:
range: -2..255
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.10
The value of the object tnSapIngressIPv6CriteriaSourcePortValue1
specifies the TCP/UDP port value1. The value of this object is used
according to the description for
tnSapIngressIPv6CriteriaSourcePortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.11
The value of the object tnSapIngressIPv6CriteriaSourcePortValue2
specifies TCP/UDP port value2. The value of this object is used
according to the description for
tnSapIngressIPv6CriteriaSourcePortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.12
The value of the object tnSapIngressIPv6CriteriaSourcePortOperator
specifies The operator specifies the manner in which
tnSapIngressIPv6CriteriaSourcePortValue1 and
tnSapIngressIPv6CriteriaSourcePortValue2 are to be use…
TN-TC-MIBTTcpUdpPortOperatorr/w .1.3.6.1.4.1.7483.6.1.2.16.3.9.1.13
The value of the object tnSapIngressIPv6CriteriaDestPortValue1
specifies the TCP/UDP port value1. The value of this object is used
according to the description for
tnSapIngressIPv6CriteriaDestPortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.14
The value of the object tnSapIngressIPv6CriteriaDestPortValue2
specifies the TCP/UDP port value2. The value of this object is used
according to the description for
tnSapIngressIPv6CriteriaDestPortOperator.
TN-TC-MIBTTcpUdpPortr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.15
The value of the object tnSapIngressIPv6CriteriaDestPortOperator
specifies the manner in which
tnSapIngressIPv6CriteriaDestPortValue1 and
tnSapIngressIPv6CriteriaDestPortValue2 are to be used.
TN-TC-MIBTTcpUdpPortOperatorr/w .1.3.6.1.4.1.7483.6.1.2.16.3.9.1.16
The value of the object tnSapIngressIPv6CriteriaDSCP specifies the
DSCP value to match in the packet
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.16.3.9.1.17
The value of the object indicates timestamp of last change to this
row in tnSapIngressIPv6CriteriaTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.3.9.1.20
.1.3.6.1.4.1.7483.6.1.2.16.5.1 · 1 row entry · 10 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkPolicyTable'
tnNetworkPolicyEntry row .1.3.6.1.4.1.7483.6.1.2.16.5.1.1
Information about a particular Network Policy.

network policy (1) is the default entry.

Default Entry is created by the agent, other entries are
created by user.

Default Entry cann…
Column Syntax OID
.
TN-TC-MIBTNetworkPolicyID
Type Constraints:
range: 1..65537
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.1
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.2
.
TN-TC-MIBTItemScoper/w
Type Values:
1exclusive
2template
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.5
tnNetworkPolicyDescription holds the description for this policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.6
tnNetworkPolicyIngressDefaultActionFC specifies the default
forwarding class to be used while classifying the ingress traffic.
TN-TC-MIBTFCNamer/w .1.3.6.1.4.1.7483.6.1.2.16.5.1.1.7
tnNetworkPolicyIngressDefaultActionProfile specifies the
default profile to be used for the ingressing traffic.
TN-TC-MIBTProfiler/w
Type Values:
1in
2out
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.8
The object tnNetworkPolicyEgressRemark specifies if the system
will remark the egress packets or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.9
Timestamp of last change to this row in tnNetworkPolicyTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.10
The object has significance only for the label edge routers
which should honor the DSCP markings instead of the LSPEXP bits.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.11
The value of tnNetworkPolicyEgressRemarkDscp object specifies
whether DSCP bits in the internal IP header should be remarked.

This object is valid only when tnNetworkPolicyEgressRemark is set to
'true'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.5.1.1.12
.1.3.6.1.4.1.7483.6.1.2.16.5.3 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkIngressDot1pTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkIngressDot1pTable'
tnNetworkIngressDot1pEntry row .1.3.6.1.4.1.7483.6.1.2.16.5.3.1
Information about a dot1p map for a network policy.

Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted b…
Column Syntax OID
.
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.7483.6.1.2.16.5.3.1.1
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.5.3.1.2
.
TN-TC-MIBTFCNamer/w .1.3.6.1.4.1.7483.6.1.2.16.5.3.1.3
there is no DEFVAL for this object. It must be deliberately
set before activating the row.
TN-TC-MIBTDEProfiler/w
Type Values:
1in
2out
3de
.1.3.6.1.4.1.7483.6.1.2.16.5.3.1.4
timestamp of last change to this row in tnNetworkIngressDot1pTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.5.3.1.5
.1.3.6.1.4.1.7483.6.1.2.16.5.4 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkIngressLSPEXPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkIngressLSPEXPTable'
tnNetworkIngressLSPEXPEntry row .1.3.6.1.4.1.7483.6.1.2.16.5.4.1
Information about LSP EXP mapping for a network policy.

Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/delet…
Column Syntax OID
.
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.7483.6.1.2.16.5.4.1.1
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.5.4.1.2
.
TN-TC-MIBTFCNamer/w .1.3.6.1.4.1.7483.6.1.2.16.5.4.1.3
there is no DEFVAL for this object. it must be deliberately
set before activating the row.
TN-TC-MIBTProfiler/w
Type Values:
1in
2out
.1.3.6.1.4.1.7483.6.1.2.16.5.4.1.4
timestamp of last change to this row in tnNetworkIngressLSPEXPTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.5.4.1.5
.1.3.6.1.4.1.7483.6.1.2.16.5.7 · 1 row entry · 11 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkEgressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkEgressFCTable'
Information about all network policies' egress FC traffic disposition.
tnNetworkEgressFCEntry row .1.3.6.1.4.1.7483.6.1.2.16.5.7.1
Information about a particular network policy's egress
per-forwarding-class traffic disposition.

Entries are created/deleted as an action of creating/deleting
a row in the tnNetworkPolicyTable.
Column Syntax OID
the name of the forwarding class (FC).
TN-TC-MIBTFCName .1.3.6.1.4.1.7483.6.1.2.16.5.7.1.1
the DSCP to use for in-profile traffic.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.16.5.7.1.2
the DSCP to use for out-of-profile traffic.
TN-TC-MIBTDSCPNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.16.5.7.1.3
the lsp-exp value to use for in-profile traffic.
TN-TC-MIBTLspExpValuer/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.4
the lsp-exp value to use for out-of-profile traffic.
TN-TC-MIBTLspExpValuer/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.5
the Dot1p to use for in-profile traffic.
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.6
the Dot1p to use for out-of-profile traffic.
TN-TC-MIBDot1PPriorityr/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.7
timestamp of last change to this row in tnNetworkEgressFCTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.8
The value of tnNetworkEgressFCForceDEValue specifies the DE value to set
for network egress packets in this forwarding class regardless of
profile status of the frames.

An inconsistentValue error is retur…
TN-TC-MIBTDEValuer/w
Type Constraints:
range: -1..1
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.9
The value of tnNetworkEgressFCDEMark specifies whether to set DE value
in the frames of this forwarding class.

An inconsistentValue error is returned if this object is set to 'false'
when tnNetworkEgressF…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.10
tnNetworkEgressFCQGrpQueue specifies the specific queue from queue-group
TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this
forwarding class.
TN-TC-MIBTEgressQueueIdr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.5.7.1.11
.1.3.6.1.4.1.7483.6.1.2.16.6.1 · 1 row entry · 4 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkQueuePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkQueuePolicyTable'
tnNetworkQueuePolicyEntry row .1.3.6.1.4.1.7483.6.1.2.16.6.1.1
.
Column Syntax OID
.
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.16.6.1.1.1
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.6.1.1.2
.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.6.1.1.3
.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.6.1.1.8
.1.3.6.1.4.1.7483.6.1.2.16.6.2 · 1 row entry · 24 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnNetworkQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnNetworkQueueTable'
.
tnNetworkQueueEntry row .1.3.6.1.4.1.7483.6.1.2.16.6.2.1
.
Column Syntax OID
The queue ID is used as the secondary index to the table entry.
Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.1
Row Status of the entry. This allows creation/deletion of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.2
The tnNetworkQueuePoolName specifies the pool that is associated
with this network queue. If tnNetworkQueuePoolName is empty, no pool
has been associated with the queue.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.3
The scheduler to which this queue would be feeding to.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.4
This specifies the level of priority while feeding to the parent.
TN-TC-MIBTLevelr/w
Type Constraints:
range: 1..8
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.5
The weight that needs to be used by the scheduler to which this queue
would be feeding to.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.6
This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for
the above CIR traffic.
TN-TC-MIBTLevelOrDefaultr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.7
The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.8
This object specifies if this is a multicast queue or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.9
tnNetworkQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers.

The value 'auto-expedited' implies that this attribute should be
dynamically updated by l…
Enumerationr/w
Enumerated Values:
1expedited
2auto-expedited
3non-expedited
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.10
The percentage of max rate allowed.
TN-TC-MIBTRatePercentr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.11
The percentage of max rate allowed.
TN-TC-MIBTPIRRatePercentr/w
Type Constraints:
range: 1..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.12
The percentage of reserved buffer space for the queue,
defined to two decimal places.
Hundredths of a percentTN-TC-MIBTBurstHundredthsOfPercentr/w
Type Constraints:
range: 0..10000
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.13
The percentage of reserved buffer space for the queue,
defined to two decimal places.
Hundredths of a percentTN-TC-MIBTBurstHundredthsOfPercentr/w
Type Constraints:
range: 0..10000
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.14
The percentage of buffer space for the queue, used
exclusively by high priority packets.
TN-TC-MIBTBurstPercentOrDefaultr/w
Type Constraints:
range: -1..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.15
The value of the object tnNetworkQueueLastChanged indicates the
timestamp of last change to this row in tnNetworkQueueTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.16
The value of the object tnNetworkQueueUsePortParent specifies
whether this queue is parented by a port-level scheduler. When
the value is 'true', this network queue is parented by a
port-level scheduler.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.17
The value of the object tnNetworkQueuePortLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its above-cir offered load.
TN-TC-MIBTLevelr/w
Type Constraints:
range: 1..8
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.18
The value of the object tnNetworkQueuePortWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its above-cir offered load.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.19
The value of the object tnNetworkQueuePortCIRLvl specifies the
port priority this queue will use to receive bandwidth from
the port-level scheduler for its within-cir offered load.
TN-TC-MIBTLevelOrDefaultr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.20
The value of the object tnNetworkQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the
port-level scheduler for its within-cir offered load.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.21
The value of tnNetworkQueuePortAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent, used to
translate packet-based rate to frame-based rate and vice versa.
Hundredths of a percentUnsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.7483.6.1.2.16.6.2.1.22
The value of tnNetworkQueueCIRAdaptation specifies the adaptation rule
to be used while computing the operational CIR value. The adaptation
rule specifies the rules to compute the operational value while
maintaining the…
r/w .1.3.6.1.4.1.7483.6.1.2.16.6.2.1.23
The value of tnNetworkQueuePIRAdaptation specifies the adaptation rule
to be used while computing the operational PIR value. The adaptation
rule specifies the rules to compute the operational value while
maintaining the…
r/w .1.3.6.1.4.1.7483.6.1.2.16.6.2.1.24
.1.3.6.1.4.1.7483.6.1.2.16.10.1 · 1 row entry · 13 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSlopePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnSlopePolicyTable'
Slope Policy Table. Each entry in this table defines the RED
slopes for the high and the low priority traffic.
tnSlopePolicyEntry row .1.3.6.1.4.1.7483.6.1.2.16.10.1.1
Slope Policy Entry.
Column Syntax OID
tnSlopePolicy maintains the name of the slope policy
identifying the policy.
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.1
Row Status of the entry. This allows creation/deletion of rows in this
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.2
User-provided description of the policy.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.3
tnSlopeHiAdminStatus specifies the admin state for the high priority RED
slope. If the tnSlopeHiAdminStatus is set to 'down', the RED slope is
inactive.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.4
The percentage of the buffer utilized after which the drop probability
starts to rise above 0.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.5
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.6
The drop probability increases steadily from 0 at the
tnSlopeHiStartAverage upto the tnSlopeHiMaxProbability at the
tnSlopeHiMaxAverage.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.7
tnSlopeLoAdminStatus specifies the admin state for the high priority RED
slope. If the tnSlopeLoAdminStatus is set to 'down', the RED slope is
inactive.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.8
The percentage of the buffer utilized after which the drop probability
starts to rise above 0.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.9
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be
dropped.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.10
The drop probability increases steadily from 0 at the
tnSlopeLoStartAverage upto the tnSlopeLoMaxProbability at the
tnSlopeLoMaxAverage.
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.11
The time average factor describes the weighting between the previous
shared buffer average utilization result and the new shared buffer
utilization in determining the new shared buffer average utilization.
Unsigned32r/w
Constraints:
range: 0-15
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.12
Timestamp of when this entry was last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.10.1.1.13
.1.3.6.1.4.1.7483.6.1.2.16.12.3 · 1 row entry · 25 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnPortSchedulerPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-QOS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-QOS-MIB::tnPortSchedulerPlcyTable'
The tnPortSchedulerPlcyTable has an entry for each port scheduler
configured on this system.
tnPortSchedulerPlcyEntry row .1.3.6.1.4.1.7483.6.1.2.16.12.3.1
Each row represents a particular port scheduler. Entries are created
and deleted by the user.
Column Syntax OID
The value of tnPortSchedulerPlcyName specifies the name of the port
scheduler.
TN-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.1
The value of tnPortSchedulerPlcyRowStatus is used for the creation
and deletion of port scheduler policies.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.2
The value of tnPortSchedulerPlcyDescription specifies the description
of this port scheduler.
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.3
The value of tnPortSchedulerPlcyLastChanged indicates the value of
sysUpTime at the time of the most recent management change to this
row.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.4
The value of tnPortSchedulerPlcyMaxRate specifies the explicit maximum
frame based bandwidth limit of this port scheduler.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.5
The value of tnPortSchedulerPlcyLvl1PIR specifies the total bandwidth
limit, PIR, for priority level 1.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.6
The value of tnPortSchedulerPlcyLvl1CIR specifies the within-cir
bandwidth limit for priority level 1.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.7
The value of tnPortSchedulerPlcyLvl2PIR specifies the total bandwidth
limit, PIR, for priority level 2.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.8
The value of tnPortSchedulerPlcyLvl2CIR specifies the within-cir
bandwidth limit for priority level 2.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.9
The value of tnPortSchedulerPlcyLvl3PIR specifies the total bandwidth
limit, PIR, for priority level 3.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.10
The value of tnPortSchedulerPlcyLvl3CIR specifies the within-cir
bandwidth limit for priority level 3.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.11
The value of tnPortSchedulerPlcyLvl4PIR specifies the total bandwidth
limit, PIR, for priority level 4.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.12
The value of tnPortSchedulerPlcyLvl4CIR specifies the within-cir
bandwidth limit for priority level 4.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.13
The value of tnPortSchedulerPlcyLvl5PIR specifies the total bandwidth
limit, PIR, for priority level 5.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.14
The value of tnPortSchedulerPlcyLvl5CIR specifies the within-cir
bandwidth limit for priority level 5.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.15
The value of tnPortSchedulerPlcyLvl6PIR specifies the total bandwidth
limit, PIR, for priority level 6.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.16
The value of tnPortSchedulerPlcyLvl6CIR specifies the within-cir
bandwidth limit for priority level 6.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.17
The value of tnPortSchedulerPlcyLvl7PIR specifies the total bandwidth
limit, PIR, for priority level 7.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.18
The value of tnPortSchedulerPlcyLvl7CIR specifies the within-cir
bandwidth limit for priority level 7.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.19
The value of tnPortSchedulerPlcyLvl8PIR specifies the total bandwidth
limit, PIR, for priority level 8.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.20
The value of tnPortSchedulerPlcyLvl8CIR specifies the within-cir
bandwidth limit for priority level 8.
kbpsTN-TC-MIBTPortSchedulerCIRr/w
Type Constraints:
range: -1..400000000
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.21
The value of tnPortSchedulerPlcyOrphanLvl specifies the port priority
of orphaned queues and schedulers that are above-cir.
TN-TC-MIBTLevelr/w
Type Constraints:
range: 1..8
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.22
The value of tnPortSchedulerPlcyOrphanWeight specifies the weight of
orphaned queues and schedulers that are above-cir.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.23
The value of tnPortSchedulerPlcyOrphanCIRLvl specifies the port priority
of orphaned queues and schedulers that are within-cir.
TN-TC-MIBTLevelOrDefaultr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.24
The value of tnPortSchedulerPlcyOrphanCIRWght specifies the weight of
orphaned queues and schedulers that are within-cir.
TN-TC-MIBTWeightr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.7483.6.1.2.16.12.3.1.25