TN-MPLS-TP-MIB Table View

The vRtrMplsTpSystemTable consists of the globally unique configuration
objects for MPLS-TP. These objects are typically required to be set
prior to configuring MPLS-TP LSP objects.

vRtrMplsTpSystemEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1

The vRtrMplsTpSystemEntry contains the globally unique configuration
objects for MPLS-TP.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID

Column	Syntax	OID
vRtrMplsTpRowStatus The value of vRtrMplsTpRowStatus specifies the row status of the MPLS-TP system entry. A row must exist in this table for a specified virtual router ID for MPLS-TP LSP configuration to be allowed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.1
vRtrMplsTpGlobalId The value of vRtrMplsTpGlobalId specifies the AS number of the node.	TN-TC-MIBTmnxMplsTpGlobalIDr/w	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.2
vRtrMplsTpNodeId The value of vRtrMplsTpNodeId specifies the unique node identifier for the given global ID. If not specified, the MPLS Router ID of the node is used.	TN-TC-MIBTmnxMplsTpNodeIDr/w	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.3
vRtrMplsTpTunnelIdMin The value of vRtrMplsTpTunnelIdMin specifies the start range of tunnel ids reserved for MPLS-TP LSPs. This variable must be set along with vRtrMplsTpTunnelIdMax to indicate the range of tunnel ids reserve…	Unsigned32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.4
vRtrMplsTpTunnelIdMax The value of vRtrMplsTpTunnelIdMax specifies the end range of tunnel ids reserved for MPLS-TP LSPs. This variable must be set along with vRtrMplsTpTunnelIdMin to indicate the range of tunnel ids reserved …	Unsigned32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.5
vRtrMplsTpAdminState The value of vRtrMplsTpAdminState specifies the desired administrative state of MPLS-TP on this router.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.6
vRtrMplsTpInheritance For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrIpAddrTable, there is bit within vRtrMplsTpInheritance that controls whether to inherit the opera…	Bitsr/w Enumerated Values: 0 vRtrMplsTpNodeId	.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.7

The vRtrMplsTpOamTemplateCfgTable maintains the MPLS-TP Templates used
by MPLS-TP OAM.
          
The template is specific to the OAM protocol and can be used to
configure MPLS-TP-OAM parameters such as BFD Tx/Rx timer intervals,
multiplier and any other relevant session/fault management parameters.
The OAM template is referenced in the MPLS-TP path configuration, so
different values are possible for the working and protect paths of a
tunnel.

vRtrMplsTpOamTemplateCfgEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1

The vRtrMplsTpOamTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpOamTemplateCfgTable.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpOamTmplName

Column	Syntax	OID
vRtrMplsTpOamTmplName The value vRtrMplsTpOamTmplName specifies the unique name of the MPLS-TP OAM Template.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.1
vRtrMplsTpOamTmplRowStatus The value of vRtrMplsTpOamTmplRowStatus specifies the row status of the MPLS-TP OAM Template entry. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed using the value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.2
vRtrMplsTpOamTmplLastChangedTime The value vRtrMplsTpOamTmplLastChangedTime indicates the time, since system startup, that an columnar object in this row changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.3
vRtrMplsTpOamTmplBfdTemplateName The value of vRtrMplsTpOamTmplBfdTemplateName specifies the TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by the OAM template.	TN-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.4
vRtrMplsTpOamTmplHoldTimeDown The value of vRtrMplsTpOamTmplHoldTimeDown specifies the time, in centiseconds, used for the hold-timer for the BFD Continuity Check (CC) session down event dampening. This guards against reporting excessive operational…	centisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.5
vRtrMplsTpOamTmplHoldTimeUp The value of vRtrMplsTpOamTmplHoldTimeUp specifies the time, in deciseconds, used for the hold-timer for the BFD Continuity Check (CC) session up event dampening. This guards against reporting excessive operational stat…	decisecondsUnsigned32r/w Constraints: range: 0-500	.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.6

The vRtrMplsTpPtcTemplateCfgTable maintains the MPLS-TP Templates used
for MPLS LSP Protection. Entries in this table maintain the common
configuration elements used by the protected LSPs.

vRtrMplsTpPtcTemplateCfgEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1

The vRtrMplsTpPtcTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpPtcTemplateCfgTable.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpPtcTmplName

Column	Syntax	OID
vRtrMplsTpPtcTmplName The value of vRtrMplsTpPtcTmplName specifies the unique name of the MPLS-TP Protection Template.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.1
vRtrMplsTpPtcTmplRowStatus The value of vRtrMplsTpPtcTmplRowStatus specifies the row status of the MPLS-TP Protection Template. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the v…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.2
vRtrMplsTpPtcTmplLastChangedTime The value of vRtrMplsTpPtcTmplLastChangedTime indicates the time, since system startup, that a columnar object in the MPLS-TP Protection Template entry last changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.3
vRtrMplsTpPtcTmplProtectionMode The value of vRtrMplsTpPtcTmplProtectionMode specifies the mode used for determining which members are actively receiving and transmitting data. In the 'one2one (1)' (1:1) architecture, a protection trans…	Enumerationr/w Enumerated Values: 1 one2one	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.4
vRtrMplsTpPtcTmplProtectionDir The value of vRtrMplsTpPtcTmplProtectionDir specifies the directional mode of the Protection Template. bidirectional - provides protection in both directions.	Enumerationr/w Enumerated Values: 2 bidirectional	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.5
vRtrMplsTpPtcTmplRevertive The value of vRtrMplsTpPtcTmplRevertive specifies whether or not an instance of this Template will operate in a 'revertive (2)' or 'nonRevertive (1)' mode.	Enumerationr/w Enumerated Values: 1 nonRevertive 2 revertive	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.6
vRtrMplsTpPtcTmplWaitToRestore The value of vRtrMplsTpPtcTmplWaitToRestore specifies the Wait-To-Restore (WTR) timer, in seconds, after a cleared failure the working path must wait before reverting. The WTR timer is used to prevent fre…	secondsUnsigned32r/w Constraints: range: 0-720	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.7
vRtrMplsTpPtcTmplRapidPscTimer The value of vRtrMplsTpPtcTmplRapidPscTimer specifies the time, in milliseconds, for the Rapid Protection Switch Coordination (PSC) timer. A value of 3 denotes 3.33 ms. When the protection domain state is…	millisecondsUnsigned32r/w Constraints: range: 3-3 range: 10-10 range: 100-100 range: 1000-1000	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.8
vRtrMplsTpPtcTmplSlowPscTimer The value of vRtrMplsTpPtcTmplSlowPscTimer specifies the time, in seconds, for the Slow Protection Switch Coordination (PSC) timer used to continually transmit the PSC message.	secondsUnsigned32r/w Constraints: range: 5-60	.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.9

The vRtrMplsTpLspPathTable maintains the MPLS-TP configuration objects
associated with an MPLS LSP path.

vRtrMplsTpLspPathEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1

The vRtrMplsTpLspPathEntry contains the configuration objects for the
MPLS-TP path table.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex

Column	Syntax	OID
vRtrMplsTpLspPathIndex The value of vRtrMplsTpLspPathIndex specifies the path index for the MPLS-TP LSP path. working (1) - A working path is the primary path for the LSP. protecting (2) - A protection path is the secondary path for …	Enumeration Enumerated Values: 1 working 2 protecting	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.1
vRtrMplsTpLspPathRowStatus The value of vRtrMplsTpLspPathRowStatus specifies the row status of the MPLS-TP LSP Path.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.2
vRtrMplsTpLspPathLastChangedTime The value of vRtrMplsTpLspPathLastChangedTime indicates the last time, since system startup, that a writable object in this table was modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.3
vRtrMplsTpLspPathAdminState The value of vRtrMplsTpLspPathAdminState specifies the administrative state of the MPLS-TP LSP Path.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.4
vRtrMplsTpLspPathOperState The value of vRtrMplsTpLspPathOperState indicates the operational state of the MPLS-TP LSP Path.	TN-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.5
vRtrMplsTpLspPathReasonDownFlags The value of vRtrMplsTpLspPathReasonDownFlags specifies the reason why the MPLS-TP LSP Path is operationally down when the administrative state is 'inService (2)'. The recognized BIT values are: unkno…	Bits Enumerated Values: 0 unknown 1 ccFault 2 cvFault 3 ifDn 4 portDn 5 parentAdminDn 6 mepAdminDn 7 unsupportedPort 8 ifNhAddrInconsistent 9 ptcTmplMsng 10 ccDnHold 11 ccUpHold 12 bfdNoRsrc	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.6
vRtrMplsTpLspPathLspNumber The value of vRtrMplsTpLspPathLspNumber specifies the MPLS-TP LSP Path number. The default value of this object is dependent on the value of vRtrMplsTpLspPathIndex. If this object refers to a 'working (1)…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.7
vRtrMplsTpLspPathInLabel The value of vRtrMplsTpLspPathInLabel specifies the LSP ingress Label used by the MPLS-TP LSP Path. Once this object is set, to remove the in-label, one must destroy and recreate the vRtrMplsTpLspPathEntr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.8
vRtrMplsTpLspPathOutLabel The value of vRtrMplsTpLspPathOutLabel specifies the LSP egress Label used by the MPLS-TP LSP Path. Once this object is set, to remove the out-label, one must destroy and recreate the vRtrMplsTpLspPathEnt…	Unsigned32r/w Constraints: range: 0-0 range: 16-1048575	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.9
vRtrMplsTpLspPathOutLink The value of vRtrMplsTpLspPathOutLink specifies the LSP out-link interface used by the MPLS-TP LSP Path. Once this object is set, to remove the out-link, one must destroy and recreate the vRtrMplsTpLspPat…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.10
vRtrMplsTpLspPathNextHopAddrType The value of vRtrMplsTpLspPathNextHopAddrType, along with vRtrMplsTpLspPathNextHopAddress, specifies the IP address used as the next hop for the MPLS-TP LSP Path. Once this object is set, to remove the ne…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.11
vRtrMplsTpLspPathNextHopAddress The value of vRtrMplsTpLspPathNextHopAddress, along with vRtrMplsTpLspPathNextHopAddrType, specifies the IP address used as the next hop for the MPLS-TP LSP Path. Once this object is set, to remove the ne…	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.12
vRtrMplsTpLspPathState The value of vRtrMplsTpLspPathState indicates the current working state of the MPLS-TP LSP Path.	Enumeration Enumerated Values: 1 unknown 2 active 3 inactive	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.13
vRtrMplsTpLspPathTimeUp The value of vRtrMplsTpLspPathTimeUp indicates the time that this MPLS-TP LSP path has been operational.	centisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.14
vRtrMplsTpLspPathTimeDown The value of vRtrMplsTpLspPathTimeDown indicates the time that this MPLS-TP LSP Path has not been operational.	centisecondsSNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.15
vRtrMplsTpLspPathActiveTimeUp The value of vRtrMplsTpLspPathActiveTimeUp indicates the time that this MPLS-TP LSP Path has been active.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.16

The vRtrMplsTpLspPathMepTable maintains the Maintenance End Points
(MEPs) for the MPLS-TP LSP path.

vRtrMplsTpLspPathMepEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1

The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP Path.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex

Column	Syntax	OID
vRtrMplsTpLspPathMepLastChgTime The value of vRtrMplsTpLspPathMepLastChgTime indicates the time, since system startup, when a columnar object for the specified row last changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.1
vRtrMplsTpLspPathMepRowStatus The value of vRtrMplsTpLspPathMepRowStatus specifies the row status of the vRtrMplsTpLspPathMepEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.2
vRtrMplsTpLspPathMepAdminState The value of vRtrMplsTpLspPathMepAdminState specifies the administrative state of the MPLS-TP LSP path.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.3
vRtrMplsTpLspPathMepProtectTmpl The value of vRtrMplsTpLspPathMepProtectTmpl specifies the associated vRtrMplsTpPtcTemplateCfgEntry to this MPLS-TP LSP Path MEP. This object is only meaningful to the row indexed with the vRtrMplsTpLspPa…	TN-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.4
vRtrMplsTpLspPathMepOamTmpl The value of vRtrMplsTpLspPathMepOamTmpl specifies the associated vRtrMplsTpOamTemplateCfgEntry to this MPLS-TP LSP Path MEP.	TN-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.5
vRtrMplsTpLspPathMepBfdEnabled The value of vRtrMplsTpLspPathMepBfdEnabled specifies whether BFD is enabled or not. If set to 'disabled (0)', BFD is not enabled. If set to 'cc (1)', BFD is enabled with Continuity Check (CC) …	Enumerationr/w Enumerated Values: 0 disabled 1 cc 2 ccCv	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.6
vRtrMplsTpLspPathMepBfdOperState The value of vRtrMplsTpLspPathMepBfdOperState indicates the operational state of the BFD session. The operational state of 'unknown (1)' indicates that the BFD session is not enabled.	TN-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.7

The vRtrMplsTpLspPtPathMepStatTable maintains the Maintenance End
Points (MEPs) statistics for MPLS-TP LSP protection paths.

vRtrMplsTpLspPtPathMepStatEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1

The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP protection Path.

Rows are created and destroyed by the system based on the configuration
of the MEP protection-type.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex

Column	Syntax	OID
vRtrMplsTpLspPtPathMepRxPdu The value of vRtrMplsTpLspPtPathMepRxPdu indicates the last received PSC PDU APS format. The value of this object compared to that of vRtrMplsTpLspPtPathMepTxPdu will indicate a configuration mismatch between the local …	VRtrMplsTpLspPathMepPduType Type Constraints: range: 4	.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.1
vRtrMplsTpLspPtPathMepTxPdu The value of vRtrMplsTpLspPtPathMepTxPdu indicates the last transmitted PSC PDU APS format. The value of this object compared to that of vRtrMplsTpLspPtPathMepRxPdu will indicate a configuration mismatch between the loc…	VRtrMplsTpLspPathMepPduType Type Constraints: range: 4	.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.2
vRtrMplsTpLspPtPathMepDefects The value of vRtrMplsTpLspPtPathMepDefects indicates the defect state of the protection path MEP. The defects monitored by this object are as follows: - protectionTypeMismatch (0) - A protection-type …	Bits Enumerated Values: 0 protectionTypeMismatch 1 revertModeMismatch	.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.3
vRtrMplsTpLspPtPathMepWTRTimer The value of vRtrMplsTpLspPtPathMepWTRTimer indicates the remaining Wait-To-Restore time, in seconds, before the protection path can switch back to the working path. A value of zero (0) indicates that the…	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.4

The vRtrMplsTpTunnelCommandTable maintains the one-shot action
commands that effect the state of the MPLS-TP operation.

vRtrMplsTpTunnelCommandEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.4.1.1

The vRtrMplsTpTunnelCommandEntry contains the command available to
execute on an existing MPLS-TP Tunnel.

Rows in this table are created and destroyed by the system.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex

Column	Syntax	OID
vRtrMplsTpTunnelCommandSwitch The value vRtrMplsTpTunnelCommandSwitch specifies the switch command to initiate on a MPLS-TP LSP Tunnel. When read, this object returns the last command written or 'noCmd (0)' if no command has been writ…	Enumerationr/w Enumerated Values: 0 noCmd 1 clear 2 forceSwitch 3 manualSwitch 4 lockout	.1.3.6.1.4.1.7483.6.1.2.83.2.4.1.1.1

The vRtrMplsTpLsrCfgTable maintains the MPLS-TP LSR
configuration information.

vRtrMplsTpLsrCfgEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1

The vRtrMplsTpLsrCfgEntry contains the configuration items
maintained by the vRtrMplsTpLsrCfgTable.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpLsrPathName

Column	Syntax	OID
vRtrMplsTpLsrPathName The value of vRtrMplsTpLsrPathName specifies the unique name of the MPLS-TP LSR Path.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.1
vRtrMplsTpLsrRowStatus The value of vRtrMplsTpLsrRowStatus specifies the row status of the MPLS-TP LSR configuration entry. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the v…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.2
vRtrMplsTpLsrLastChangedTime The value of vRtrMplsTpLsrLastChangedTime indicates the time, since system startup, that a columnar object in the MPLS-TP LSR entry last changed state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.3
vRtrMplsTpLsrAdminState The value of vRtrMplsTpLsrAdminState specifies the administrative state of the MPLS-TP LSR.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.4
vRtrMplsTpLsrOperState The value of vRtrMplsTpLsrOperState indicates the operational state of the MPLS-TP LSR.	TN-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.5
vRtrMplsTpLsrFPInLabel The value of vRtrMplsTpLsrFPInLabel specifies the forward path (FP) ingress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. On…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.6
vRtrMplsTpLsrFPOutLabel The value of vRtrMplsTpLsrFPOutLabel specifies the forward path (FP) egress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. On…	Unsigned32r/w Constraints: range: 16-1048575 range: 0-0	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.7
vRtrMplsTpLsrFPOutLink The value of vRtrMplsTpLsrFPOutLink specifies the forward path (FP) out-link interface used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.8
vRtrMplsTpLsrFPNextHopAddrType The value of vRtrMplsTpLsrFPNextHopAddrType, along with vRtrMplsTpLsrFPNextHopAddress, specifies the forward path (FP) IP address used as the next hop for the MPLS-TP LSP Path. This object can be set only…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.9
vRtrMplsTpLsrFPNextHopAddress The value of vRtrMplsTpLsrFPNextHopAddress, along with vRtrMplsTpLsrFPNextHopAddrType, specifies the forward path (FP) IP address used as the next hop for the MPLS-TP LSR Path. This object can be set only…	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.10
vRtrMplsTpLsrRPInLabel The value of vRtrMplsTpLsrRPInLabel specifies the reverse path (RP) LSP ingress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.11
vRtrMplsTpLsrRPOutLabel The value of vRtrMplsTpLsrRPOutLabel specifies the reverse path (RP) LSP egress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. …	Unsigned32r/w Constraints: range: 0-0 range: 16-1048575	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.12
vRtrMplsTpLsrRPOutLink The value of vRtrMplsTpLsrRPOutLink specifies the reverse path (RP) LSP out-link interface used by the MPLS-TP LSP Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.13
vRtrMplsTpLsrRPNextHopAddrType The value of vRtrMplsTpLsrRPNextHopAddrType, along with vRtrMplsTpLsrRPNextHopAddress, specifies the reverse path (RP) IP address used as the next hop for the MPLS-TP LSP Path. This object can be set only…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.14
vRtrMplsTpLsrRPNextHopAddress The value of vRtrMplsTpLsrRPNextHopAddress, along with vRtrMplsTpLsrRPNextHopAddrType, specifies the reverse path (RP) IP address used as the next hop for the MPLS-TP LSR Path. This object can be set only…	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.15
vRtrMplsTpLsrFPEnabled The value of vRtrMplsTpLsrFPEnabled specifies whether the forward path is configured for the LSR path.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.16
vRtrMplsTpLsrRPEnabled The value of vRtrMplsTpLsrRPEnabled specifies whether the reverse path is configured for the LSR path.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.17

The vRtrMplsTpLsrPathIdTable maintains the MPLS-TP LSR Path
configuration information.

vRtrMplsTpLsrPathIdEntry row .1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1

The vRtrMplsTpLsrPathIdEntry contains the configuration items
maintained by the vRtrMplsTpLsrPathIdTable.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpLsrPathIdSrcGlobalId vRtrMplsTpLsrPathIdSrcNodeId vRtrMplsTpLsrPathIdSrcTunNum vRtrMplsTpLsrPathIdDestGlobalId vRtrMplsTpLsrPathIdDestNodeId vRtrMplsTpLsrPathIdDestTunNum vRtrMplsTpLsrPathIdLspNumber

Column	Syntax	OID
vRtrMplsTpLsrPathIdSrcGlobalId The value of vRtrMplsTpLsrPathIdSrcGlobalId specifies the unique node identifier for the given source global ID.	TN-TC-MIBTmnxMplsTpGlobalID	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.1
vRtrMplsTpLsrPathIdSrcNodeId The value of vRtrMplsTpLsrPathIdSrcNodeId specifies the unique node identifier for the given source node ID.	TN-TC-MIBTmnxMplsTpNodeID	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.2
vRtrMplsTpLsrPathIdSrcTunNum The value of vRtrMplsTpLsrPathIdSrcTunNum specifies the source tunnel number of an MPLS-TP Static LSP.	Unsigned32 Constraints: range: 0-61440	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.3
vRtrMplsTpLsrPathIdDestGlobalId The value of vRtrMplsTpLsrPathIdDestGlobalId specifies the unique node identifier for the given remote global ID.	TN-TC-MIBTmnxMplsTpGlobalID	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.4
vRtrMplsTpLsrPathIdDestNodeId The value of vRtrMplsTpLsrPathIdDestNodeId specifies the unique node identifier for the given remote node ID.	TN-TC-MIBTmnxMplsTpNodeID	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.5
vRtrMplsTpLsrPathIdDestTunNum The value of vRtrMplsTpLsrPathIdDestTunNum specifies the destination tunnel number of an MPLS-TP Static LSP.	Unsigned32 Constraints: range: 0-61440	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.6
vRtrMplsTpLsrPathIdLspNumber The value of vRtrMplsTpLsrPathIdLspNumber specifies the MPLS-TP LSP Path number.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.7
vRtrMplsTpLsrPathIdRowStatus The value of vRtrMplsTpLsrPathIdRowStatus specifies the row status of the MPLS-TP LSR Path. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the value 'des…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.8
vRtrMplsTpLsrPathIdPathName The value of vRtrMplsTpLsrPathIdPathName specifies the unique name of the MPLS-TP LSR Path. This object MUST be specified on row-creation, and must reference an existing vRtrMplsTpLsrPathName.	TN-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.9

vRtrMplsTpTunnelTable maintains a list of MPLS-TP tunnels for the
specific router instance.

vRtrMplsTpTunnelEntry row .1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1

vRtrMplsTpTunnelEntry defines a tunnel to a particular destination in a
specific router context. A tunnel to a specific destination is an
MPLS-TP Static LSP.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpTunnelNodeId vRtrMplsTpTunnelGlobalId vRtrMplsTpTunnelPreference vRtrMplsTpTunnelType vRtrMplsTpTunnelID vRtrMplsTpTunnelNextHopAddrType vRtrMplsTpTunnelNextHopAddress

Column	Syntax	OID
vRtrMplsTpTunnelNodeId vRtrMplsTpTunnelNodeId indicates the destination node id of this tunnel.	TN-TC-MIBTmnxMplsTpNodeID	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.1
vRtrMplsTpTunnelGlobalId vRtrMplsTpTunnelGlobalId indicates the global id of the system.	TN-TC-MIBTmnxMplsTpGlobalID	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.2
vRtrMplsTpTunnelPreference The value of vRtrMplsTpTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources. This is an absolute number used internally by the system to specify preferences for the tun…	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.3
vRtrMplsTpTunnelType The value of vRtrMplsTpTunnelType indicates the type of this tunnel entity.	TN-TC-MIBTmnxMplsTpTunnelType Type Values: 1 mplsTpStatic	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.4
vRtrMplsTpTunnelID The value of vRtrMplsTpTunnelID provides an additional index to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'mplsTpSt…	TN-TC-MIBTmnxTunnelID	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.5
vRtrMplsTpTunnelNextHopAddrType The value of vRtrMplsTpTunnelNextHopAddrType specifies the address type of vRtrMplsTpTunnelNextHopAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.6
vRtrMplsTpTunnelNextHopAddress The value of vRtrMplsTpTunnelNextHopAddress specifies the ip address of the next hop for the MPLS-TP tunnel and it depends on the value of vRtrMplsTpTunnelNextHopAddrType.	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16 range: 20-20	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.7
vRtrMplsTpTunnelMetric The value of vRtrMplsTpTunnelMetric indicates the metric of the tunnel. This is used in addition to the preference for this tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.8
vRtrMplsTpTunnelAge The value of vRtrMplsTpTunnelAge indicates the number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of 'too old' can be implied except through knowledge of owner…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.9