TN-ETH-RING-MIB Table View

The tnEthRingConfigTable consists of the Ethernet Ring
configuration information.

tnEthRingConfigEntry row .1.3.6.1.4.1.7483.6.1.2.72.1.1.1

The tnEthRingConfigEntry contains information pertaining to an
individual Ethernet Ring.

Rows in this table are created and destroyed using the
tnEthRingRowStatus object.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnEthRingIndex

Column	Syntax	OID
tnEthRingIndex The value of tnEthRingIndex specifies the row index of the Ethernet Ring Group.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.1
tnEthRingRowStatus The value of tnEthRingRowStatus controls the creation and deletion of row entries in the tnEthRingConfigTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.2
tnEthRingTimeStamp The value of tnEthRingTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.3
tnEthRingDescription The value of tnEthRingDescription specifies the user supplied description of the Ethernet Ring.	TN-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.4
tnEthRingAdminState The value of tnEthRingAdminState specifies the administrative state of the Ethernet Ring.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.5
tnEthRingOperState The value of tnEthRingOperState indicates the operational state of the Ethernet Ring.	TN-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.6
tnEthRingGuardTime The value of tnEthRingGuardTime specifies the guard timer, in deciseconds, of a Ring-APS (R-APS) node. The guard timer is used to prevent the Ethernet Ring node from acting upon outdated R-APS messages an…	decisecondsUnsigned32r/w Constraints: range: 1-20	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.7
tnEthRingRevertTime The value of tnEthRingRevertTime specifies the Wait-To-Restore (WTR) timer, in seconds, of a Ring-APS (R-APS) node. The WTR timer is used to prevent frequent operation of the protection switching due to i…	secondsUnsigned32r/w Constraints: range: 0-720	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.8
tnEthRingRevertTimeCountDn The value of tnEthRingRevertTimeCountDn indicates the remaining time, in seconds, before the Ethernet Ring can revert to its original state.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.9
tnEthRingCcmHoldDownTime The value of tnEthRingCcmHoldDownTime specifies the time, in centiseconds, used for the hold-timer for associated Continuity Check (CC) Session down event dampening. This guards against reporting excessive path operatio…	centisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.10
tnEthRingCcmHoldUpTime The value of tnEthRingCcmHoldUpTime specifies the time, in deciseconds, used for the hold-timer for associated Continuity Check (CC) Session up event dampening. This guards against reporting excessive path operational s…	decisecondsUnsigned32r/w Constraints: range: 0-5000	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.11
tnEthRingRplNode The value of tnEthRingRplNode specifies the Ring Protection Link (RPL) type of the Ethernet Ring Node.	TnEthRingRplNodeTyper/w Type Values: 0 rplNone 1 rplOwner 2 rplNeighbor	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.12
tnEthRingNodeId The value of tnEthRingNodeId specifies the Ethernet Ring Node ID The default value is the system's MAC address. Writing the MAC address value 00:00:00:00:00:00 to tnEthRingNodeId will reset…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.13
tnEthRingTxApsPdu The value of tnEthRingTxApsPdu indicates the contents of the R-APS PDU transmitted on the Ethernet Ring.	TnEthRingApsInfoType Type Constraints: range: 0 range: 8..32	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.14
tnEthRingDefectStatus The value of tnEthRingDefectStatus indicates what defects are active on the Ethernet Ring. The defects are defined as: dFopPM -- Provisioning Mismatch	Bits Enumerated Values: 0 dFopPM	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.15
tnEthRingSubRingType The value of tnEthRingSubRingType specifies whether this Ethernet Ring is a sub-ring or not. A value of 'none (0)' specifies that the Ethernet Ring is not a sub-ring. A value 'virtualLink (1)' specifies that the Etherne…	Enumerationr/w Enumerated Values: 0 none 1 virtualLink 2 nonVirtualLink	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.16
tnEthRingSubRingInterconnectId The value of tnEthRingSubRingInterconnectId specifies whether the Ethernet sub-ring is interconnected to an Ethernet Ring, as identified by the Ethernet Ring ID, a VPLS service (4294967295), or is not interconnected (0)…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.17
tnEthRingSubRingPropTopChange The value of tnEthRingSubRingPropTopChange specifies whether or not the Ethernet sub-ring propagates topology changes to the interconnected ring as specified by the value of tnEthRingSubRingInterconnectId. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.18
tnEthRingCompatibleVersion The value of tnEthRingCompatibleVersion specifies the backward compatibility logic for the Ethernet Ring. If this object is set to 'version1 (1)' then: 1. Attempts at setting tnEthRingCommandSwitch to…	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.19
tnEthRingState The value of tnEthRingState indicates the current state of ERP instance, valid on all ERP Ring nodes. It is a combination of ERP Instance activation state and the state of the ERP Protocol.	Enumeration Enumerated Values: 0 deactivated 1 idle 2 protection 3 manualSwitch 4 forcedSwitch 5 pending	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.20
tnEthRingAlmProfName Alarm profile for ethernet ring.	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.6.1.2.72.1.1.1.21

The tnEthRingPathTable consists of the paths associated with
the corresponding tnEthRingConfigEntry.

tnEthRingPathEntry row .1.3.6.1.4.1.7483.6.1.2.72.1.3.1

The tnEthRingPathEntry contains information pertaining to an
individual path associated with a tnEthRingConfigEntry.

Rows in this table are created and destroyed using the
tnEthRingPathRowStatus object.

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnEthRingIndex tnEthRingPathIndex

Column	Syntax	OID
tnEthRingPathIndex The tnEthRingPathIndex specifies the row index of the member.	TnEthRingPathIndex Type Values: 0 pathA 1 pathB	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.1
tnEthRingPathRowStatus The tnEthRingPathRowStatus, along with tnEthRingPathIfIndex and tnEthRingPathIfRapsCcTag, control the creation and deletion of row entries in the tnEthRingPathTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.2
tnEthRingPathTimeStamp The value of tnEthRingPathTimeStamp indicates the time, since system startup, of the last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.3
tnEthRingPathIfIndex The value of tnEthRingPathIfIndex specifies the member's port tmnxPortPortID associated with the tnEthRingConfigEntry. This object must be included in the same SNMP PDU as that of the tnEthRingPathRowStat…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.4
tnEthRingPathIfRapsCcTag The value of tnEthRingPathIfRapsCcTag specifies the member's encapsulation. This object must be included in the same SNMP PDU as that of the tnEthRingPathRowStatus object for creation of the path. The abs…	TN-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.5
tnEthRingPathDescription The value of tnEthRingPathDescription specifies a detailed description of the Ethernet Ring path.	TN-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.6
tnEthRingPathAdminStatus The value of tnEthRingPathAdminStatus specifies the administrative state of the path. 'outOfService (3)' specifies that the member will not partake in Ring Redundancy.	TN-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.7
tnEthRingPathOperStatus The tnEthRingPathOperStatus indicates the operational state of of the path. The tnEthRingPathOperStatus supports the following two TmnxOperState values: inService (2) outOfService (3)	TN-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.8
tnEthRingPathType The value of tnEthRingPathType specifies the Ethernet Ring Node Path acts as an rplEnd or in a normal state. This is only configurable if tnEthRingRplNode is set to 'rplOwner (1)' or 'rplNeighbor (2)'.	Enumerationr/w Enumerated Values: 0 normal 1 rplEnd	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.9
tnEthRingPathFwdState The value of tnEthRingPathFwdState indicates whether the Ethernet Ring Node Path blocks the transmission and reception of traffic on the ring port.	Enumeration Enumerated Values: 0 unblocked 1 blocked	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.10
tnEthRingPathFwdStateChgTime The value of tnEthRingPathFwdStateChgTime indicates the time, since system startup, that the Ethernet Ring Path last experienced a change in the forwarding state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.11
tnEthRingPathRxApsPdu The value of tnEthRingPathRxApsPdu indicates the contents of the R-APS PDU received on the Ethernet Ring path.	TnEthRingApsInfoType Type Constraints: range: 0 range: 8..32	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.12
tnEthRingPortState The value of tnEthRingPortState indicates the current state of ERP Port or an EPR instance. It is a combination of port administrative state and the state of the Ring Port.	Enumeration Enumerated Values: 0 portDisabled 1 portNormal 2 portForcedSwitched 3 portManualSwitched 4 portFailedSF 5 na	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.13
tnEthRingPathAlmProfName Alarm profile for ethernet ring path.	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.6.1.2.72.1.3.1.14

The tnEthRingSAPPathTable consists of the configuration for
Ethernet Ring Group members associated to SAPs.

tnEthRingSAPPathEntry row .1.3.6.1.4.1.7483.6.1.2.72.1.4.1.1

The tnEthRingSAPPathEntry contains the SAP information pertaining
to an Ethernet Ring Group member.

Entries in the tnEthRingSAPPathTable are created and destroyed by
the system when the TIMETRA-SAP-MIB::sap…

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId TN-SERV-MIBtnSvcId TN-SAP-MIBtnSapPortId TN-SAP-MIBtnSapEncapValue

Column	Syntax	OID
tnEthRingSAPPathIndex The value of tnEthRingSAPPathIndex indicates the corresponding path index of the tnEthRingPathEntry for this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.72.1.4.1.1.1
tnEthRingSAPPathControlFlag The value of tnEthRingSAPPathControlFlag indicates whether or not this row corresponds to the control SAP of the tnEthRingConfigEntry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.72.1.4.1.1.2

The tnEthRingCommandTable consists of the one-shot action commands
that effect the state of the Ethernet Ring operation.

tnEthRingCommandEntry row .1.3.6.1.4.1.7483.6.1.2.72.1.5.1

The tnEthRingCommandEntry contains the commands available to
execute on an existing Ethernet Ring Group Path.

Rows in this table are created and destroyed by the system.

Indexes

No indexes recorded

Column	Syntax	OID
tnEthRingCommandSwitch The value of tnEthRingCommandSwitch specifies the switch command to initiate on a path of an Ethernet Ring Group. When read, this object returns the last command written or 'noCmd (0)' if no command has b…	Enumerationr/w Enumerated Values: 0 noCmd 1 clear 2 forceSwitch 3 manualSwitch	.1.3.6.1.4.1.7483.6.1.2.72.1.5.1.1