TIMETRA-SFLOW-MIB Table View

The tmnxSflowRcvrTable contains configuration attributes for the
receivers of sFlow information, in addition to what is contained in
SFLOW-MIB:sFlowRcvrTable.

tmnxSflowRcvrEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.1.1

The tmnxSflowRcvrEntry consists of configuration for the receivers of
sFlow information. For every entry in table SFLOW-MIB:sFlowRcvrTable
there is an entry in tmnxSflowRcvrTable.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxSflowRcvrLastChanged The value of tmnxSflowRcvrLastChanged indicates the time, since system startup, that the sFlow receiver was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.1.1.1
tmnxSflowRcvrBackupAddressType The value of tmnxSflowRcvrBackupAddressType specifies the IP address type of the backup sFlow receiver.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.95.2.1.1.2
tmnxSflowRcvrBackupAddress The value of tmnxSflowRcvrBackupAddress specifies the IP address of the backup sFlow receiver.	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.95.2.1.1.3
tmnxSflowRcvrBackupDstPort The value of tmnxSflowRcvrBackupDstPort specifies the backup destination port of the sFlow receiver.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.95.2.1.1.4

The tmnxSflowCpTable contains the configuration attributes for the
sFlow counter poller information.

tmnxSflowCpEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.2.1

The tmnxSflowCpEntry consists of configuration for an sFlow counter
poller. This is an sFlow counter data polling instance, against a
particular entity instance, from which counter statistics are pulled
by the sFlow age…

Indexes

SFLOW-MIBsFlowCpDataSource SFLOW-MIBsFlowCpInstance

Column	Syntax	OID
tmnxSflowCpRowStatus The value of tmnxSflowCpRowStatus specifies the row status of the sFlow counter poller entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.95.2.2.1.1
tmnxSflowCpLastChanged The value of tmnxSflowCpLastChanged indicates the time, since system startup, that the sFlow counter poller was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.2.1.2

The sflow ingress counter map policer table
(tmnxSflowIngCMapPlcrTable) contains the configuration of the mapping
of sFlow ingress counters to policers.

tmnxSflowIngCMapPlcrEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.3.1

An entry in tmnxSflowIngCMapPlcrTable contains sFlow ingress counter
configuration information for a given policer.

Entries are created by setting tmnxSflowIngCMapPlcrRowStatus to
'createAndGo(4)' and are d…

Indexes

tmnxSflowIngCMapPlcrId

Column	Syntax	OID
tmnxSflowIngCMapPlcrId The value of tmnxSflowIngCMapPlcrId specifies the policer ID of the sFlow ingress counter map policer entry.	TIMETRA-TC-MIBTIngPolicerId Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.95.2.3.1.1
tmnxSflowIngCMapPlcrRowStatus The value of tmnxSflowIngCMapPlcrRowStatus specifies the row status of the sFlow ingress counter map policer entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.95.2.3.1.2
tmnxSflowIngCMapPlcrLastChange The value of tmnxSflowIngCMapPlcrLastChange indicates the time, since system startup, that the sFlow ingress counter map policer entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.3.1.3
tmnxSflowIngCMapPlcrTrafficType The value of tmnxSflowIngCMapPlcrTrafficType specifies the traffic type of the sFlow ingress counter map policer entry.	TmnxSflowCounterMapTrafficTyper/w Type Values: 1 unicast 2 multicast 3 broadcast	.1.3.6.1.4.1.6527.3.1.2.95.2.3.1.4

The sflow egress counter map policer table (tmnxSflowEgrCMapPlcrTable)
contains the configuration of the mapping of sFlow egress counters to
policers.

tmnxSflowEgrCMapPlcrEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.4.1

An entry in tmnxSflowEgrCMapPlcrTable contains sFlow egress counter
configuration information for a given map type and policer.

Entries are created by setting tmnxSflowEgrCMapPlcrRowStatus to
'createAndGo(4…

Indexes

tmnxSflowEgrCMapPlcrId

Column	Syntax	OID
tmnxSflowEgrCMapPlcrId The value of tmnxSflowEgrCMapPlcrId specifies the policer ID of the sFlow egress counter map policer entry.	TIMETRA-TC-MIBTEgrPolicerId Type Constraints: range: 1..8	.1.3.6.1.4.1.6527.3.1.2.95.2.4.1.1
tmnxSflowEgrCMapPlcrRowStatus The value of tmnxSflowEgrCMapPlcrRowStatus specifies the row status of the sFlow egress counter map policer entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.95.2.4.1.2
tmnxSflowEgrCMapPlcrLastChange The value of tmnxSflowEgrCMapPlcrLastChange indicates the time, since system startup, that the sFlow egress counter map policer entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.4.1.3
tmnxSflowEgrCMapPlcrTrafficType The value of tmnxSflowEgrCMapPlcrTrafficType specifies the traffic type of the sFlow egress counter map policer entry.	TmnxSflowCounterMapTrafficTyper/w Type Values: 1 unicast 2 multicast 3 broadcast	.1.3.6.1.4.1.6527.3.1.2.95.2.4.1.4

The sflow ingress counter map queue table (tmnxSflowIngCMapQueueTable)
contains the configuration of the mapping of sFlow ingress counters to
queues.

tmnxSflowIngCMapQueueEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.5.1

An entry in tmnxSflowIngCMapQueueTable contains sFlow ingress counter
configuration information for a given queue.

Entries are created by setting tmnxSflowIngCMapQueueRowStatus to
'createAndGo(4)' and are d…

Indexes

tmnxSflowIngCMapQueueId

Column	Syntax	OID
tmnxSflowIngCMapQueueId The value of tmnxSflowIngCMapQueueId specifies the queue ID of the sFlow ingress counter map queue entry.	TIMETRA-TC-MIBTIngressQueueId Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.95.2.5.1.1
tmnxSflowIngCMapQueueRowStatus The value of tmnxSflowIngCMapQueueRowStatus specifies the row status of the sFlow ingress counter map queue entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.95.2.5.1.2
tmnxSflowIngCMapQueueLastChange The value of tmnxSflowIngCMapQueueLastChange indicates the time, since system startup, that the sFlow ingress counter map queue entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.5.1.3
tmnxSflowIngCMapQueueTrafficType The value of tmnxSflowIngCMapQueueTrafficType specifies the traffic type of the sFlow ingress counter map queue entry.	TmnxSflowCounterMapTrafficTyper/w Type Values: 1 unicast 2 multicast 3 broadcast	.1.3.6.1.4.1.6527.3.1.2.95.2.5.1.4

The sflow egress counter map queue table (tmnxSflowEgrCMapQueueTable)
contains the configuration of the mapping of sFlow egress counters to
queues.

tmnxSflowEgrCMapQueueEntry row .1.3.6.1.4.1.6527.3.1.2.95.2.6.1

An entry in tmnxSflowEgrCMapQueueTable contains sFlow egress counter
configuration information for a given queue.

Entries are created by setting tmnxSflowEgrCMapQueueRowStatus to
'createAndGo(4)' and are de…

Indexes

tmnxSflowEgrCMapQueueId

Column	Syntax	OID
tmnxSflowEgrCMapQueueId The value of tmnxSflowEgrCMapQueueId specifies the queue ID of the sFlow egress counter map queue entry.	TIMETRA-TC-MIBTEgressQueueId Type Constraints: range: 0..8	.1.3.6.1.4.1.6527.3.1.2.95.2.6.1.1
tmnxSflowEgrCMapQueueRowStatus The value of tmnxSflowEgrCMapQueueRowStatus specifies the row status of the sFlow egress counter map queue entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.95.2.6.1.2
tmnxSflowEgrCMapQueueLastChange The value of tmnxSflowEgrCMapQueueLastChange indicates the time, since system startup, that the sFlow egress counter map queue entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.2.6.1.3
tmnxSflowEgrCMapQueueTrafficType The value of tmnxSflowEgrCMapQueueTrafficType specifies the traffic type of the sFlow egress counter map queue entry.	TmnxSflowCounterMapTrafficTyper/w Type Values: 1 unicast 2 multicast 3 broadcast	.1.3.6.1.4.1.6527.3.1.2.95.2.6.1.4

The tmnxSflowRcvrStatsTable contains statistics objects for the sFlow
receivers.

tmnxSflowRcvrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.95.3.1.1

The tmnxSflowRcvrStatsEntry consists of statistics of sFlow
information for the given receiver.

For every entry in the SFLOW-MIB::sFlowRcvrTable, there is one entry
for each tmnxSflowRcvrType in the tmnxSfl…

Indexes

SFLOW-MIBsFlowRcvrIndex tmnxSflowRcvrType

Column	Syntax	OID
tmnxSflowRcvrType The value of tmnxSflowRcvrType specifies the receiver type.	Enumeration Enumerated Values: 1 primary 2 backup	.1.3.6.1.4.1.6527.3.1.2.95.3.1.1.1
tmnxSflowRcvrLastPacketSent The value of tmnxSflowRcvrLastPacketSent indicates the time, since system startup, when the last packet was sent from the given receiver. Zero indicates that no packets have been sent yet.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.95.3.1.1.2
tmnxSflowRcvrPacketsSent The value of tmnxSflowRcvrPacketsSent indicates the number of packets sent from the given receiver.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.95.3.1.1.3
tmnxSflowRcvrPacketErrors The value of tmnxSflowRcvrPacketErrors indicates the number of packet errors that have been detected by the given receiver.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.95.3.1.1.4