TIMETRA-SAS-QOS-MIB Table View

Information about all Access-egress policies.

tAccessEgressEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1

Access Egress QoS information for a particular port

Indexes

tAccessEgressIndex

Column	Syntax	OID
tAccessEgressIndex the sap-egress policy ID is used as index for the table.	TAccessEgressPolicyID Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.1
tAccessEgressRowStatus Row Status of this policy's entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.2
tAccessEgressScope scope of the sap-egress policy.	TItemScoper/w Type Values: 1 exclusive 2 template	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.3
tAccessEgressDescription user-supplied description of this sap-egress policy.	TN-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.4
tAccessEgressLastChanged timestamp of last change to this row in tAccessEgressTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.5
tAccessEgressRemark This object specifies if the system will remark the egress packets or not. DEf val is TRUE for STU and FALSE for MTU	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.6
tAccessEgressRemarkPolicyId Remark Policy Id that be used when remarking is enabled.	TRemarkPolicyIDr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.7
tAccessEgressRemarkType This object specifies system remark type, tAccessEgressRemark will be set to true and tAccessEgressRemarkType will specify the remark type.	Enumerationr/w Enumerated Values: 1 use-dot1p 2 use-dscp 3 all	.1.3.6.1.4.1.6527.6.2.2.2.1.1.1.1.8

information about all access-egress policies' queues.

tAccessEgressQueueEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1

Information about a particular sap-egress queue.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.

Indexes

tAccessEgressIndex tAccessEgressQueueIndex

Column	Syntax	OID
tAccessEgressQueueIndex the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.1
tAccessEgressQueueRowStatus Row Status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.2
tAccessEgressQueueCBS The amount of reserved buffer space (in kilo bytes) for the queue.	TBurstSizer/w Type Constraints: range: -1..131072	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.3
tAccessEgressQueueMBS The maximum amount of buffer space (in kilo bytes) allowed for the queue.	TBurstSizer/w Type Constraints: range: -1..131072	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.4
tAccessEgressQueuePIRAdaptation The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.5
tAccessEgressQueueCIRAdaptation The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.6
tAccessEgressQueueAdminPIR The administrative PIR specified by the user.	TPIRRater/w Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.7
tAccessEgressQueueAdminCIR The administrative CIR specified by the user.	TCIRRater/w Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.8
tAccessEgressQueueOperPIR The administrative PIR specified by the user.	TPIRRate Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.9
tAccessEgressQueueOperCIR The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.	TCIRRate Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.10
tAccessEgressQueueLastChanged timestamp of last change to this row in tAccessEgressQueueTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.11
tAccessEgressQueuePolicyName SapEgressQueuePolicyName determines the queue management policy attached to this SAP Egress queue.	TN-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.12
tAccessEgressQueuePolicyQueueMode tAccessEgressQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created.	Enumerationr/w Enumerated Values: 1 strict-ef 2 strict 3 weighted	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.13
tAccessEgressQueuePolicyWeight tAccessEgressQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.6527.6.2.2.2.1.1.2.1.14

Information about all sap-ingress policies' Meters.

tSapIngressMeterEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1

Information about a particular meter for a sap-ingress policy.
Meter (1) is the used as a default for unicast and meter (11) is
used as a default for multicast. Both these are created by the
agent and can be edited but …

Indexes

TIMETRA-QOS-MIBtSapIngressIndex tSapIngressMeter

Column	Syntax	OID
tSapIngressMeter The Meter ID is used as the secondary index to the table entry.	TN-TC-MIBTSapIngressMeterId Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.1
tSapIngressMeterRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.2
tSapIngressMeterMCast This object specifies if this is a multicast meter or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.8
tSapIngressMeterCBSobsolete The amount of committed burst size (in kilo bits) for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.10
tSapIngressMeterMBSobsolete The maximum amount of burst size (in kilo bits) allowed for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.11
tSapIngressMeterPIRAdaptation The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.13
tSapIngressMeterCIRAdaptation The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.14
tSapIngressMeterAdminPIR The administrative PIR specified by the user.	TIngressPIRRater/w Type Constraints: range: -1..20000000	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.15
tSapIngressMeterAdminCIR The administrative CIR specified by the user.	TIngressCIRRater/w Type Constraints: range: -1..20000000	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.16
tSapIngressMeterOperPIR The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules.	TPIRRate Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.17
tSapIngressMeterOperCIR The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules.	TCIRRate Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.18
tSapIngressMeterLastChanged Timestamp of last change to this row in tSapIngressMeterTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.19
tSapIngressMeterMode This object is not used on SAS platform currently	TMeterModer/w Type Values: 1 priority 2 profile	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.21
tSapIngressMeterRateMode Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime.	TMeterRateModer/w Type Values: 1 trtcm 2 srtcm 3 trtcm1 4 trtcm2	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.22
tSapIngressMeterAdminCBS The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.23
tSapIngressMeterAdminMBS The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.24
tSapIngressMeterOperCBS The operational value derived by computing the CBS value from the administrative CBS value	TIngressBurstSize Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.25
tSapIngressMeterOperMBS The operational value derived by computing the MBS value from the administrative MBS value	TIngressBurstSize Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.26
tSapIngressMeterProfileMode The value of this object specifies whether the meter mode is color aware or color blind	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.27
tSapIngressMeterColorMode Set meter color mode	Enumerationr/w Enumerated Values: 1 color-aware 2 color-blind	.1.3.6.1.4.1.6527.6.2.2.2.1.2.1.1.28

This table maintains the mapping of a particular
forwarding class traffic into the specified meter.

tSasSapIngressFCEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.2.1

Information about a particular sap-ingress policy's
forwarding class mappings to meters.

Indexes

No indexes recorded

Column	Syntax	OID
tSapIngressFCMeter The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meter should be used.	TN-TC-MIBTSapIngressMeterIdr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.2.1.1
tSapIngressFCMCastMeter The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the d…	TN-TC-MIBTSapIngressMeterIdr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.2.1.2
tSapIngressFCBCastMeter The specific broadcast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the d…	TN-TC-MIBTSapIngressMeterIdr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.2.1.3
tSapIngressFCUnknownMeter The specific unknown destination meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies …	TN-TC-MIBTSapIngressMeterIdr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.2.1.4

A table that contains ingress QoS meter SAP
statistics.

sapIngQosMeterStatsEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1

Ingress statistics about a specific SAP's
QoS meter.

Indexes

TIMETRA-SERV-MIBsvcId TIMETRA-SAP-MIBsapPortId TIMETRA-SAP-MIBsapEncapValue sapIngQosMeterId

Column	Syntax	OID
sapIngQosMeterId The index of the ingress QoS meter of this SAP.	TN-TC-MIBTSapIngressMeterId Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.1
sapIngQosMeterStatsForwardedInProfPackets The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.10
sapIngQosMeterStatsForwardedOutProfPackets The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.11
sapIngQosMeterStatsForwardedInProfOctets The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.12
sapIngQosMeterStatsForwardedOutProfOctets The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.13
sapIngQosMeterStatsForwardedPackets The number of packets forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.14
sapIngQosMeterStatsForwardedOctets The number of octets forwarded by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.15
sapIngQosMeterStatsDroppedPackets The number of packets dropped by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.16
sapIngQosMeterStatsDroppedOctets The number of octets dropped by the ingress Qchip.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.6.2.2.2.1.2.3.1.17

Extension table to tSapIngressQueueTable

tSapIngressQueueExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.5.1

Indexes

No indexes recorded

Column	Syntax	OID
tSapIngressQueuePolicyName SapIngressQueuePolicyName determines the queue management policy attached to this SAP Ingress queue.	TN-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.2.5.1.1

information about sap-ingress policies extenstion to
tSapIngressIPCriteriaEntry

tSapIngressIPCriteriaExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.6.1

Information about a particular ip-criteria entry for a sap-ingress
policy. This is an extenstion to tSapIngressIPCriteriaEntry.

Indexes

No indexes recorded

Column	Syntax	OID
tSapIngressIPCriteriaActionProfile tSapIngressIPCriteriaActionProfile specifies the profile of the traffic that matches the specific IP criteria. The value none indicates that the profile is derived from ingress classification and profilin…	TProfileOrDeir/w Type Values: 1 in 2 out 13 use-dei	.1.3.6.1.4.1.6527.6.2.2.2.1.2.6.1.1

Information about mac-criteria entries. 
Extenstion to tSapIngressMacCriteriaEntry

tSapIngressMacCriteriaExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.7.1

Information about a particular mac-criteria entry
for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.

Indexes

No indexes recorded

Column	Syntax	OID
tSapIngressMacCriteriaActionProfile tSapIngressMacCriteriaActionProfile specifies the profile of the traffic that matches the specific MAC criteria. The value none indicates that the profile is derived from ingress classification and profil…	TProfileOrDeir/w Type Values: 1 in 2 out 13 use-dei	.1.3.6.1.4.1.6527.6.2.2.2.1.2.7.1.1

information about sap-ingress policies extenstion to
tSapIngressIPv6CriteriaEntry

tSapIngressIPv6CriteriaExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.2.8.1

Information about a particular ip-criteria entry for a sap-ingress
policy. This is an extenstion to tSapIngressIPv6CriteriaEntry.

Indexes

No indexes recorded

Column	Syntax	OID
tSapIngressIPv6CriteriaActionProfile tSapIngressIPv6CriteriaActionProfile specifies the profile of the traffic that matches the specific IP criteria. The value none indicates that the profile is derived from ingress classification and profil…	TProfileOrDeir/w Type Values: 1 in 2 out 13 use-dei	.1.3.6.1.4.1.6527.6.2.2.2.1.2.8.1.1

This table maintains the mapping of a particular
forwarding class traffic into the specified meter.

tNetworkIngressFCExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1

Information about a particular network-ingress policy's
forwarding class mappings to meter.

Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.

Indexes

TIMETRA-QOS-MIBtNetworkPolicyIndex tNetworkIngressFCExtnName

Column	Syntax	OID
tNetworkIngressFCExtnName tNetworkIngressFCExtnName specifies the forwarding class for which this mapping is defined.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1.1
tNetworkIngressFCExtnRowStatus Row Status for this Entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1.2
tNetworkIngressFCExtnMeter The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meters should be used.	TN-TC-MIBTNetworkIngressMeterIdr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1.3
tNetworkIngressFCExtnMCastMeter The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the d…	TN-TC-MIBTNetworkIngressMeterIdr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1.4
tNetworkIngressFCExtnLastChanged tNetworkIngressFCExtnLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.3.1.1.5

information about all network policies' meters.

tNetworkIngressMeterEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1

Information about a particular meter for a network policy.
Meter (1) is the used as a default for unicast and meter (9) is
used as a default for multicast. Both these are created by the
agent and can be edited but not r…

Indexes

TIMETRA-QOS-MIBtNetworkPolicyIndex tNetworkIngressMeterIndex

Column	Syntax	OID
tNetworkIngressMeterIndex The Meter ID is used as the secondary index to the table entry.	TN-TC-MIBTNetworkIngressMeterId Type Constraints: range: 0..16	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.1
tNetworkIngressMeterRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.2
tNetworkIngressMeterCBSobsolete The amount of committed burst size (in kilo bits) for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.3
tNetworkIngressMeterMBSobsolete The maximum amount of burst size (in kilo bits) allowed for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.4
tNetworkIngressMeterCIRAdaptation The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.5
tNetworkIngressMeterPIRAdaptation The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.	TAdaptationRuler/w Type Values: 1 max 2 min 3 closest	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.6
tNetworkIngressMeterAdminPIR The administrative PIR specified by the user.	TIngressPIRRater/w Type Constraints: range: -1..20000000	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.7
tNetworkIngressMeterAdminCIR The administrative CIR specified by the user.	TIngressCIRRater/w Type Constraints: range: -1..20000000	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.8
tNetworkIngressMeterOperPIR The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules.	TPIRRate Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.9
tNetworkIngressMeterOperCIR The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules.	TCIRRate Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.10
tNetworkIngressMeterLastChanged Timestamp of last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.11
tNetworkIngressMeterMode Network Ingress Meter Mode	TMeterModer/w Type Values: 1 priority 2 profile	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.12
tNetworkIngressMeterMCast This object specifies if this is a multicast meter or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.13
tNetworkIngressMeterRateMode Network Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime.	TMeterRateModer/w Type Values: 1 trtcm 2 srtcm 3 trtcm1 4 trtcm2	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.14
tNetworkIngressMeterAdminCBS The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.15
tNetworkIngressMeterAdminMBS The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter.	TIngressBurstSizer/w Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.16
tNetworkIngressMeterOperCBS The operational value derived by computing the CBS value from the administrative CBS value	TIngressBurstSize Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.17
tNetworkIngressMeterOperMBS The operational value derived by computing the MBS value from the administrative MBS value	TIngressBurstSize Type Constraints: range: -1 range: 4..2146959	.1.3.6.1.4.1.6527.6.2.2.2.1.3.2.1.26

Slope Policy Table. Additions for sas platform

tSasSlopePolicyExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1

Slope Policy Entry additions for sas platform.

Indexes

No indexes recorded

Column	Syntax	OID
tSlopeHiQueue1DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.1
tSlopeHiQueue2DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.2
tSlopeHiQueue3DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.3
tSlopeHiQueue4DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.4
tSlopeHiQueue5DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.5
tSlopeHiQueue6DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.6
tSlopeHiQueue7DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.7
tSlopeHiQueue8DropRate High Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.8
tSlopeLoQueue1DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.9
tSlopeLoQueue2DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.10
tSlopeLoQueue3DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.11
tSlopeLoQueue4DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.12
tSlopeLoQueue5DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.13
tSlopeLoQueue6DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.14
tSlopeLoQueue7DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.15
tSlopeLoQueue8DropRate Low Queue Drop Rate	TSlopeDropRater/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.16
tSlopeHiStartThreshold High slope Start Threshold.This object implies that once the shared buffer utilization reaches the start-threshold level then high-priority packets egressing out from a particular queue would be dropped at configured…	TSlopeThresholdr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.17
tSlopeLoStartThreshold Low slope Start Threshold.This implies that once the shared buffer utilization reaches the start-threshold level then low-priority packets egressing out from a particular queue would be dropped at configured drop ra…	TSlopeThresholdr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.1.1.18

Slope Policy Per Queue Per Port additions for SAS-M platform.
In SAS-M there are three slopes associated with a queue.
One slope for Tcp Green packets, one for Tcp Yellow packets
and one for Non Tcp Packets(both green and yellow packets).
Each slope in turn can have four parameters defining its 
behavior

tSlopePolicyQueueEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1

Indexes

TIMETRA-QOS-MIBtSlopePolicy tSlopePolicyQueueId

Column	Syntax	OID
tSlopePolicyQueueId Queue for which slope policy is being defined	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.1
tSlopePolicyQueueRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.2
tSlopePolicyQueueLastChanged Timestamp of last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.3
tSlopePolicyQueueHiAdminStatus tSlopePolicyQueueHiAdminStatus specifies the admin state for the queue's high profile (Tcp Green Packets )slope. If the tSlopePolicyQueueHiAdminStatus is set to 'down',the slope is inactive.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.4
tSlopePolicyQueueHiStartAverage The percentage of the buffer utilized after which the drop probability starts to rise above 0.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.5
tSlopePolicyQueueHiMaxAverage The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.6
tSlopePolicyQueueHiMaxProbability High Profile Max Probability.Defines the slope between the Start Average and Max Average	TMaxProbabilityr/w Type Constraints: range: 0..10 range: 25 range: 50 range: 75 range: 100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.7
tSlopePolicyQueueLoAdminStatus tSlopePolicyQueueLoAdminStatus specifies the admin state for the queue's low profile (Tcp Yellow Packets )slope. If the tSlopePolicyQueueLoAdminStatus is set to 'down',the slope is inactive.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.8
tSlopePolicyQueueLoStartAverage The percentage of the buffer utilized after which the drop probability starts to rise above 0.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.9
tSlopePolicyQueueLoMaxAverage The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.10
tSlopePolicyQueueLoMaxProbability Low Profile Max Probability.Defines the slope between the Start Average and Max Average	TMaxProbabilityr/w Type Constraints: range: 0..10 range: 25 range: 50 range: 75 range: 100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.11
tSlopePolicyQueueNonTcpAdminStatus tSlopePolicyQueueNonTcpAdminStatus specifies the admin state for the queue's non tcp profile (Non Tcp Packets )slope. If the tSlopePolicyQueueNonTcpAdminStatus is set to 'down',the slope is inactive.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.12
tSlopePolicyQueueNonTcpStartAverage The percentage of the buffer utilized after which the drop probability starts to rise above 0.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.13
tSlopePolicyQueueNonTcpMaxAverage The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.14
tSlopePolicyQueueNonTcpMaxProbability Non Tcp Profile Max Probability.Defines the slope between the Start Average and Max Average	TMaxProbabilityr/w Type Constraints: range: 0..10 range: 25 range: 50 range: 75 range: 100	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.15
tSlopePolicyQueueTimeAvgFactor The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.6527.6.2.2.2.1.4.2.1.16

The tSasPortSchedulerPlcyTable has an entry for each port scheduler
configured on this system.

tSasPortSchedulerPlcyEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1

Each row represents a particular port scheduler. Entries are created
and deleted by the user.

Indexes

No indexes recorded

Column	Syntax	OID
tPortSchedulerPlcyMode Port Scheduler Policy Mode	TPlcyModer/w Type Values: 0 strict 1 roundRobin 2 weightedRoundRobin 3 weightedDeficitRoundRobin	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.1
tPortSchedulerPlcyQuanta Port Scheduler Policy Quanta	TPlcyQuantar/w	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.2
tPortSchedulerPlcyQueue1Weight Port Scheduler Policy Queue 1 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.3
tPortSchedulerPlcyQueue2Weight Port Scheduler Policy Queue 2 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.4
tPortSchedulerPlcyQueue3Weight Port Scheduler Policy Queue 3 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.5
tPortSchedulerPlcyQueue4Weight Port Scheduler Policy Queue 4 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.6
tPortSchedulerPlcyQueue5Weight Port Scheduler Policy Queue 5 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.7
tPortSchedulerPlcyQueue6Weight Port Scheduler Policy Queue 6 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.8
tPortSchedulerPlcyQueue7Weight Port Scheduler Policy Queue 7 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.9
tPortSchedulerPlcyQueue8Weight Port Scheduler Policy Queue 8 Weight	TQWeightr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.6527.6.2.2.2.1.5.1.1.10

Extension table to tNetworkPolicyTable

tNetworkPolicyExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1

Indexes

No indexes recorded

Column	Syntax	OID
tNetworkPolicyType Network policy Type determines the point of attachment of the network qos policy. Network policy with 'ipInterface' type can be attached to ip interface and 'port' type can be attached to physical port	TNetworkPolicyTyper/w Type Values: 1 ipInterface 2 port	.1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1.1
tNetworkPolicyRemarkPolicyId Remark Policy Id that be used.	TRemarkPolicyIDr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1.2
tNetworkIngressMeterColorMode tNetworkIngressMeterColorMode indicates whether the ip interface is color-aware or color-blind. By default every ip interface is color-aware	Enumerationr/w Enumerated Values: 1 color-aware 2 color-blind	.1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1.3
tNetworkIngressMplsLspExpProfile tNetworkIngressMplsLspExpProfile attaches the MPLS LSP EXP Profile to this network policy.	TN-TC-MIBTMplsLspExpProfMapIDr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1.4
tNetworkEgressRemarkType This object specifies system remark type, tNetworkPolicyEgressRemark will be set to true and tNetworkEgressRemarkType will specify the remark type.	Enumerationr/w Enumerated Values: 1 use-dot1p 2 use-dscp 3 all	.1.3.6.1.4.1.6527.6.2.2.2.1.7.1.1.5

Extension table to tNetworkQueueTable

tNetworkQueueExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.7.2.1

Indexes

No indexes recorded

Column	Syntax	OID
tNetworkQueuePolicyName NetworkQueuePolicyName determines the queue management policy attached to this network queue.	TN-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.7.2.1.1
tNetworkQueuePolicyQueueMode tNetworkQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created.	Enumerationr/w Enumerated Values: 1 strict-ef 2 strict 3 weighted	.1.3.6.1.4.1.6527.6.2.2.2.1.7.2.1.2
tNetworkQueuePolicyWeight tNetworkQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.6527.6.2.2.2.1.7.2.1.3

Information about all network policies' egress FC traffic disposition,
this table extends the capabilities available in tNetworkEgressFCTable

tNetworkEgressFCExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.7.3.1

Information about a particular network policy's egress
per-forwarding-class traffic disposition.

Entries are created/deleted as an action of creating/deleting
a row in the tNetworkPolicyTable.

…

Indexes

No indexes recorded

Column	Syntax	OID
tNetworkEgressFCDot1pProfile the Dot1p to use for in-profile traffic.	TN-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7	.1.3.6.1.4.1.6527.6.2.2.2.1.7.3.1.1

Queue Management Policy definition for 7210-X platform.

tQueueMgmtPolicyEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1

Indexes

tQueueMgmtPolicyName

Column	Syntax	OID
tQueueMgmtPolicyName The value of tQueueMgmtPolicyName specifies the name of the Queue Management policy.	TN-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.1
tQueueMgmtPolicyRowStatus Row Status of the entry. This allows creation/deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.2
tQueueMgmtPolicyLastChanged Timestamp of last change to this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.3
tQueueMgmtPolicyDescription User-provided description of the policy.	TN-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.4
tQueueMgmtPolicyHiAdminStatus tQueueMgmtPolicyHiAdminStatus specifies the admin state for the queue's high profile (Green Packets) slope. If the tQueueMgmtPolicyHiAdminStatus is set to 'down',the slope is inactive.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.5
tQueueMgmtPolicyHiStartAverage The percentage of the buffer utilized after which the drop probability starts to rise above 0.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.6
tQueueMgmtPolicyHiMaxAverage The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.7
tQueueMgmtPolicyHiMaxProbability High Profile Max Probability.Defines the slope between the Start Average and Max Average	Unsigned32r/w Constraints: range: 1-99	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.8
tQueueMgmtPolicyLoAdminStatus tQueueMgmtPolicyLoAdminStatus specifies the admin state for the queue's low profile (Yellow Packets) slope. If the tQueueMgmtPolicyLoAdminStatus is set to 'down',the slope is inactive.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.9
tQueueMgmtPolicyLoStartAverage The percentage of the buffer utilized after which the drop probability starts to rise above 0.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.10
tQueueMgmtPolicyLoMaxAverage The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.11
tQueueMgmtPolicyLoMaxProbability Low Profile Max Probability.Defines the slope between the Start Average and Max Average	Unsigned32r/w Constraints: range: 1-99	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.12
tQueueMgmtPolicyCBS The amount of reserved buffer space (in kilo bytes) for the queue.	Integer32r/w Constraints: range: -1-800000	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.13
tQueueMgmtPolicyMBS The maximum amount of buffer space (in kilo bytes) allowed for the queue.	Integer32r/w Constraints: range: 1-800000 range: -1--1	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.14
tQueueMgmtPolicyTimeAvgFactor The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.15
tQueueMgmtPolicyScope Scope of the queue management policy.	TItemScoper/w Type Values: 1 exclusive 2 template	.1.3.6.1.4.1.6527.6.2.2.2.1.8.1.1.16

Extension table to tSapEgressTable

tSapEgressExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.9.1.1

Indexes

No indexes recorded

Column	Syntax	OID
tSapEgressRemark This object specifies if the system will remark the egress packets on SAP or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.6.2.2.2.1.9.1.1.1
tSapEgressRemarkPolicyId Remark Policy Id that be used. The default value is the default dot1p-dscp policy.	TRemarkPolicyIDr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.9.1.1.2

Extension table to tSapEgressQueueTable

tSapEgressQueueExtnEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.9.2.1

Indexes

No indexes recorded

Column	Syntax	OID
tSapEgressQueuePolicyName SapEgressQueuePolicyName determines the queue management policy attached to this SAP Egress queue.	TN-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.6.2.2.2.1.9.2.1.1
tSapEgressQueuePolicyQueueMode tSapEgressQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created.	Enumerationr/w Enumerated Values: 1 strict-ef 2 strict 3 weighted	.1.3.6.1.4.1.6527.6.2.2.2.1.9.2.1.2
tSapEgressQueuePolicyWeight tSapEgressQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.6527.6.2.2.2.1.9.2.1.3

Information about all MPLS LSP EXP Profiles.

tMplsLspExpProfMapEntry row .1.3.6.1.4.1.6527.6.2.2.2.1.10.1.1

Information about one MPLS LSP EXP Profile

Indexes

tMplsLspExpProfMapIndex

Column	Syntax	OID
tMplsLspExpProfMapIndex The tMplsLspExpProfMapIndex is used as index for the table.	TN-TC-MIBTMplsLspExpProfMapID Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.6.2.2.2.1.10.1.1.1
tMplsLspExpProfMapRowStatus Row Status of this profile entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.6.2.2.2.1.10.1.1.2
tMplsLspExpProfMapDescription User-provided description of the policy.	TN-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.6.2.2.2.1.10.1.1.3
tMplsLspExpProfMapLastChanged timestamp of last change to this row in tMplsLspExpProfMapTable.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.6.2.2.2.1.10.1.1.4