TIMETRA-PXC-MIB Table View

The tmnxPxcTable contains the Port Cross-Connect (PXC) configuration
information.
          
A PXC is a physical port which is internally looped. Two logical
sub-ports are created under the PXC. These logical ports are used to
create two paths within the loop; one upstream path, and one
downstream path.

tmnxPxcEntry row .1.3.6.1.4.1.6527.3.1.2.105.2.1.1

The tmnxPxcEntry consists of configurable objects for a given PXC.

Indexes

tmnxPxcId

Column	Syntax	OID
tmnxPxcId The value of tmnxPxcId specifies the unique identifier of this PXC.	Unsigned32 Constraints: range: 1-256	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.1
tmnxPxcRowStatus The value of tmnxPxcRowStatus specifies the row status. It allows the creation and deletion of PXC entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.2
tmnxPxcLastChanged The value of tmnxPxcLastChanged indicates the time, since system startup, that the configuration of this PXC entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.3
tmnxPxcAdminState The value of tmnxPxcAdminState specifies the administrative state for this PXC entry.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService Description: The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules.	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.4
tmnxPxcOperState The value of tmnxPxcOperState indicates the operational state of this PXC entry.	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition Description: The TmnxOperState data type is an enumerated integer that describes the values used to identify the current operational state of functional modules.	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.5
tmnxPxcPortId The value of tmnxPxcPortId specifies the port identifier of the port associated with this PXC entry. A value of '1e000000'H indicates this object has not been configured. When this object i…	TIMETRA-TC-MIBTmnxPortIDr/w Description: A portid is a unique 32 bit number with special encoding. Refer to TIMETRA-CHASSIS-MIB::tmnxChassisPortIdScheme for a description of the various port mapping schemes used by the system for physical ports and …	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.6
tmnxPxcDescription The value of tmnxPxcDescription specifies the description of this PXC entry. An empty string indicates this object has not been configured.	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.105.2.1.1.7

The tmnxFpeTable contains the Forward Path Extension (FPE)
configuration information to provide cross-connect infrastructure to
stitch traffic between external PW and the PW port.

tmnxFpeEntry row .1.3.6.1.4.1.6527.3.1.2.105.2.2.1

The tmnxFpeEntry consists of configurable objects for a given FPE.

Indexes

tmnxFpeId

Column	Syntax	OID
tmnxFpeId The value of tmnxFpeId specifies the unique identifier of this entry.	TIMETRA-TC-MIBTmnxFpeId Type Constraints: range: 1..64 Description: The data type TmnxFpeId is a number that uniquely identifies a Forward Path Extension (FPE).	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.1
tmnxFpeRowStatus The value of tmnxFpeRowStatus specifies the row status. It allows the creation and deletion of entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.2
tmnxFpeLastChanged The value of tmnxFpeLastChanged indicates the time, since system startup, that the configuration of this entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.3
tmnxFpeDescription The value of tmnxFpeDescription specifies the description of this entry.	TIMETRA-TC-MIBTItemDescriptionr/w Based On: SNMPv2-TCDisplayString Type Constraints: range: 0..80 Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.4
tmnxFpePxcId The value of tmnxFpePxcId specifies the cross connect port identifier associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeXaLagId is set to non-default and tmnxFpePxcId is set t…	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.5
tmnxFpeXaLagId The value of tmnxFpeXaLagId specifies the LAG identifier A value associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeXaLagId is set to non-default and tmnxFpeXbLagId is set to d…	TIMETRA-TC-MIBLAGInterfaceNumberOrZeror/w Type Constraints: range: 0..800 Description: LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes zero indicating invalid LAG identifier.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.6
tmnxFpeXbLagId The value of tmnxFpeXbLagId specifies the LAG identifier B value associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeXaLagId is set to non-default and tmnxFpeXbLagId is set to d…	TIMETRA-TC-MIBLAGInterfaceNumberOrZeror/w Type Constraints: range: 0..800 Description: LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes zero indicating invalid LAG identifier.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.7
tmnxFpePwPort The value of tmnxFpePwPort specifies whether this Forward Path Extension (FPE) will be used to setup FPE PW cross-connect. An 'inconsistentValue' error is returned if tmnxFpePwPort is set to non-default w…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.8
tmnxFpeVxlanTermination The value of tmnxFpeVxlanTermination specifies whether this Forward Path Extension (FPE) will be used to terminate VXLAN. An 'inconsistentValue' error is returned if tmnxFpePwPort is set to non-default wh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.9
tmnxFpeVxlanOperStatus The value of tmnxFpeVxlanOperStatus indicates the operating status of vxlan.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.10
tmnxFpePwPortOperStatus The value of tmnxFpePwPortOperStatus indicates the operating status of the pw port.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.11
tmnxFpeSubMgmtExtensions The value of tmnxFpeSubMgmtExtensions specifies whether this Forward Path Extension (FPE) will be reserved for hybrid access bonding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.12
tmnxFpeVxlanTermRouterId The tmnxFpeVxlanTermRouterId specifies the routing context that provides reachability to the tunnel configured.	TIMETRA-TC-MIBTmnxVRtrIDr/w Type Constraints: range: 1..10240 Description: A number used to identify a virtual router instance in the system.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.17
tmnxFpeSrv6 The tmnxFpeSrv6 specifies whether SRV6 is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.18
tmnxFpeSrv6OperStatus The value of tmnxFpeSrv6OperStatus indicates the operating status of vxlan.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.19
tmnxFpeMultiPath The value of tmnxFpeMultiPath specifies whether this entry is associated with a single path or a collection of paths.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.20
tmnxFpeSrv6Type The tmnxFpeSrv6Type specifies the way this FPE is used for segment-routing-v6.	Enumerationr/w Enumerated Values: 0 none 1 origination 2 termination	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.21
tmnxFpeMvpnUmhRateMonitoring The value of tmnxFpeMvpnUmhRateMonitoring specifies whether this Forward Path Extension (FPE) is reserved for MVPN UMH Rate Monitoring.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.23
tmnxFpeNatMapT The value of tmnxFpeNatMapT specifies whether this Forward Path Extension (FPE) is reserved for NAT Mapping of Address and Port using Translation (MAP-T).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.24
tmnxFpeSrv6OrigType The tmnxFpeSrv6OrigType specifies the way this FPE origination is used for segment-routing-v6.	Enumerationr/w Enumerated Values: 0 none 1 routedVpls	.1.3.6.1.4.1.6527.3.1.2.105.2.2.1.25

The tmnxFpeMultiPathTable contains the path information for Forward
Path Extensions (FPE) that are associated with multiple cross-connect
ports or lags.

tmnxFpeMultiPathEntry row .1.3.6.1.4.1.6527.3.1.2.105.2.4.1

Indexes

tmnxFpeId tmnxFpePathId

Column	Syntax	OID
tmnxFpePathId The value of tmnxFpePathId specifies the unique identifier of this entry within a Forwarding Path Extension (FPE).	TIMETRA-TC-MIBTmnxFpePathId Type Constraints: range: 1..64 Description: The data type TmnxFpePathId is a number that uniquely identifies a path within a multi-path Forward Path Extension (FPE).	.1.3.6.1.4.1.6527.3.1.2.105.2.4.1.2
tmnxFpeMultiPathPxcId The value of tmnxFpeMultiPathPxcId specifies the cross connect port identifier associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeMultiPathXaLagId is set to non-default and tmn…	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.6527.3.1.2.105.2.4.1.3
tmnxFpeMultiPathXaLagId The value of tmnxFpeMultiPathXaLagId specifies the LAG identifier A value associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeMultiPathPxcId is set to non-default and tmnxFpeMul…	TIMETRA-TC-MIBLAGInterfaceNumberOrZeror/w Type Constraints: range: 0..800 Description: LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes zero indicating invalid LAG identifier.	.1.3.6.1.4.1.6527.3.1.2.105.2.4.1.4
tmnxFpeMultiPathXbLagId The value of tmnxFpeMultiPathXbLagId specifies the LAG identifier B value associated with this entry. An 'inconsistentValue' error is returned if tmnxFpeMultiPathPxcId is set to non-default and tmnxFpeMul…	TIMETRA-TC-MIBLAGInterfaceNumberOrZeror/w Type Constraints: range: 0..800 Description: LAGInterfaceNumberOrZero is similar to LAGInterfaceNumber but includes zero indicating invalid LAG identifier.	.1.3.6.1.4.1.6527.3.1.2.105.2.4.1.5
tmnxFpeMultiPathRowStatus The value of tmnxFpeMultiPathRowStatus specifies the row status. It allows the creation and deletion of entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.105.2.4.1.6

The tmnxFpeSrv6IfTable contains the Forward Path Extension (FPE)
configuration information to provide cross-connect infrastructure for
segment-routing-v6.

tmnxFpeSrv6IfEntry row .1.3.6.1.4.1.6527.3.1.2.105.2.5.1

The tmnxFpeSrv6IfEntry consists of configurable objects for a given
FPE.

Indexes

tmnxFpeId tmnxFpeSrv6If

Column	Syntax	OID
tmnxFpeSrv6Ifobsolete The tmnxFpeSrv6If specifies the interface of this entry.	Enumeration Enumerated Values: 1 interface-a 2 interface-b	.1.3.6.1.4.1.6527.3.1.2.105.2.5.1.1
tmnxFpeSrv6IfLastChangedobsolete The value of tmnxFpeSrv6IfLastChanged indicates the time, since system startup, that the configuration of this entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.105.2.5.1.2
tmnxFpeSrv6IfMtuobsolete The tmnxFpeSrv6IfMtu specifies the interface MTU size	Unsigned32r/w Constraints: range: 0-0 range: 1280-9786	.1.3.6.1.4.1.6527.3.1.2.105.2.5.1.3
tmnxFpeSrv6IfOperMtuobsolete The tmnxFpeSrv6IfOperMtu indicates the operational MTU size of the origination interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.105.2.5.1.4
tmnxFpeSrv6IfQosPolicyIdobsolete The tmnxFpeSrv6IfQosPolicyId specifies the associated QOS network policy.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.105.2.5.1.5

The tmnxFpeAppsIfTable contains the Forward Path Extension (FPE)
configuration information to provide cross-connect infrastructure for
pw-port application.

tmnxFpeAppsIfEntry row .1.3.6.1.4.1.6527.3.1.2.105.2.6.1

The tmnxFpeAppsIfEntry consists of configurable objects for a given
FPE Application.

Indexes

tmnxFpeId tmnxFpeAppsIf

Column	Syntax	OID
tmnxFpeAppsIf The tmnxFpeAppsIf specifies the interface of this entry.	Enumeration Enumerated Values: 1 interface-a 2 interface-b	.1.3.6.1.4.1.6527.3.1.2.105.2.6.1.1
tmnxFpeAppsIfLastChanged The value of tmnxFpeAppsIfLastChanged indicates the time, since system startup, that the configuration of this entry was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.105.2.6.1.2
tmnxFpeAppsIfMtu The value of tmnxFpeAppsIfMtu specifies the interface MTU size. This object is only valid for FPE with segment-routing-v6 application.	Unsigned32r/w Constraints: range: 0-0 range: 1280-9786	.1.3.6.1.4.1.6527.3.1.2.105.2.6.1.3
tmnxFpeAppsIfOperMtu The value of tmnxFpeAppsIfOperMtu indicates the operational MTU size of the origination interface. This object is only valid for FPE with segment-routing-v6 application.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.105.2.6.1.4
tmnxFpeAppsIfQosPolicyId The tmnxFpeAppsIfQosPolicyId specifies the associated QOS network policy.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.105.2.6.1.5