This document is the SNMP MIB module for the Nokia SROS implementation of Power Shelf. Copyright (c) 2017-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. |
NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCE | SNMPv2-CONF |
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 | SNMPv2-SMI |
TEXTUAL-CONVENTION, TimeStamp | SNMPv2-TC |
TmnxHwIndex, tmnxHwClass, tmnxCpmPowerShelfCommsFail | TIMETRA-CHASSIS-MIB |
timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs | TIMETRA-GLOBAL-MIB |
TItemDescription, TNamedItemOrEmpty | TIMETRA-TC-MIB |
Name | Base Type | Values/Constraints |
---|---|---|
invalidPowerShelfType(0), unassigned(1), suppPowerShelfType2(2), suppPowerShelfType3(3), suppPowerShelfType4(4), suppPowerShelfType5(5), suppPowerShelfType6(6), suppPowerShelfType7(7), suppPowerShelfType8(8), suppPowerShelfType9(9), suppPowerShelfType10(10), suppPowerShelfType11(11), suppPowerShelfType12(12), suppPowerShelfType13(13), suppPowerShelfType14(14), suppPowerShelfType15(15) | ||
![]() | .1.3.6.1.4.1.6527.1.1.3.118 | |
![]() | .1.3.6.1.4.1.6527.3.1.1.118 | |
![]() | .1.3.6.1.4.1.6527.3.1.1.118.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.1.118.2 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.1.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.2 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.2.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.2.1.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.2.1.2 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.2.1.3 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.1 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.2 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.3 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.4 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.5 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.6 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.7 | |
![]() | .1.3.6.1.4.1.6527.3.1.2.118.3.1.1.8 | |
![]() | .1.3.6.1.4.1.6527.3.1.3.120 | |
![]() | .1.3.6.1.4.1.6527.3.1.3.120.0 | |
![]() | .1.3.6.1.4.1.6527.3.1.3.120.0.1 |
Name | OID | Description |
---|---|---|
.1.3.6.1.4.1.6527.3.1.3.120.0.1.1 | [CAUSE] The tmnxPowerShelfInputPwrModeSwitch is generated when tmnxPowerShelfInputPowerMode has changed value. [EFFECT] No effect. [RECOVERY] No recovery required. | |
.1.3.6.1.4.1.6527.3.1.3.120.0.1.2 | [CAUSE] The tmnxPowerShelfCommsDown is generated when there is a loss of communications with the power shelf controller. [EFFECT] If there is a power failure, it will not be detected since the power modules cannot be polled. The system will continue to report the state of the power modules as they were when last seen. [RECOVERY] Correct the power shelf controller communications problem. | |
.1.3.6.1.4.1.6527.3.1.3.120.0.1.3 | [CAUSE] The tmnxPowerShelfCommsUp notification is generated when a loss of communications with the power shelf controller has been resolved. [EFFECT] Power failures can be detected. [RECOVERY] No recovery required. | |
.1.3.6.1.4.1.6527.3.1.3.120.0.1.4 | [CAUSE] The tmnxPowerShelfOutputStatusSwitch is generated when tmnxPowerShelfOutputStatus has changed value. [EFFECT] No effect. [RECOVERY] No recovery required. | |
.1.3.6.1.4.1.6527.3.1.3.120.0.1.5 | [CAUSE] The tmnxPowerShelfOutputStatusSwitch is generated when the physical output switch on the power shelf is set to Standby. [EFFECT] The power output from the identified power shelf is switched off and does not supply power to the system. [RECOVERY] Set output switch to On to restore power output. | |
.1.3.6.1.4.1.6527.3.1.3.120.0.1.6 | [CAUSE] The tmnxPowerShelfOutputStatusSwitch is generated when the physical output switch on the power shelf is set to On. [EFFECT] Power output from the identified power shelf is enabled and now supplies power to the system. [RECOVERY] No recovery required. |