TIMETRA-APS-MIB Table View

This table augments the apsCommandTable of the APS-MIB

tApsCommandEntry row .1.3.6.1.4.1.6527.3.1.2.29.1.1

A conceptual row in the tApsCommandTable. This row exists only if the
associated apsConfigEntry is active.

Indexes

No indexes recorded

Column	Syntax	OID
tApsExerciseCommandResult Stores the result of the last exercise command on the APS group and channel specified by the index values. When read this object returns 4(unknown) if no exercise command has been written to this channel …	Enumeration Enumerated Values: 1 passed 2 failed 3 preempted 4 unknown	.1.3.6.1.4.1.6527.3.1.2.29.1.1.1

This table augments the apsChanConfigTable of the APS-MIB. It contains
status information in addition to those mentioned in
apsChanStatusTable of the APS MIB.

tApsChanStatusEntry row .1.3.6.1.4.1.6527.3.1.2.29.2.1

A conceptual row in the tApsChanStatusTable. This row exists only if
the associated apsChanConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
tApsChanTxLaisState The current state of the 7x50 APS forced Tx-LAIS on the specified APS channel. Note that the 7x50 products always receive and transmit on the same (active) APS channel. For a Multi-Chassis (MC) APS or a u…	Enumeration Enumerated Values: 0 clear 1 momentary 2 persistent	.1.3.6.1.4.1.6527.3.1.2.29.2.1.1

This table augments the apsConfigTable of the APS-MIB.

tApsMcConfigEntry row .1.3.6.1.4.1.6527.3.1.2.29.3.1

A conceptual row in the tApsMcConfigTable. This row exists only if the
associated apsConfigEntry is active.

Indexes

No indexes recorded

Column	Syntax	OID
tApsMcNeighborAddrType The value of object tApsMcNeighborAddrType specifies the address type of the neighbor's IP address as specified by tApsMcNeighborAddr in the case of Multi-Chassis APS architecture.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.29.3.1.1
tApsMcNeighborAddr The value of tApsMcNeighborAddr variable specifies the neighbor's IP address only on a Multi-Chassis APS where the working and protect circuits are configured on different routers. The value of tApsMcNeighborAddr set to…	OctetStringr/w Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.29.3.1.2
tApsMcAdvertiseInterval The value of tApsMcAdvertiseInterval specifies the time interval, in deciseconds, between 'I am operational' messages sent by both protect and working circuits to their neighbor for Multi-Chassis APS. The value of tApsM…	decisecondsUnsigned32r/w Constraints: range: 10-650	.1.3.6.1.4.1.6527.3.1.2.29.3.1.3
tApsMcHoldTime The value of tApsMcHoldTime specifies how much time can pass, in 100s of milliseconds, without receiving an advertise packet from the neighbor before the Multi-Chassis signaling link is considered not operational. It i…	decisecondsUnsigned32r/w Constraints: range: 10-650	.1.3.6.1.4.1.6527.3.1.2.29.3.1.4

tApsMcStatusTable augments the apsConfigTable of the APS-MIB. It
contains status information in addition to those mentioned in
apsStatusTable of the APS MIB.

tApsMcStatusEntry row .1.3.6.1.4.1.6527.3.1.2.29.4.1

A conceptual row in the tApsMcStatusTable. This row exists only if the
associated apsConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
tApsMcApsCtlLinkState The value of tApsMcApsCtlLinkState indicates the current state of the 7x50 Multi-Chassis (MC) APS Group Control Link. Note that for a Single-Chassis APS group the state is always up. The st…	Enumeration Enumerated Values: 0 up 1 dnSignalingFailure 2 dnIncompatibleNbr	.1.3.6.1.4.1.6527.3.1.2.29.4.1.1

tApsConfigTable augments the apsConfigTable of the APS-MIB. It
contains configuration information in addition to those mentioned in
apsConfigTable of the APS MIB.

tApsConfigEntry row .1.3.6.1.4.1.6527.3.1.2.29.5.1

A conceptual row in the tApsConfigTable. This row exists only if the
associated apsConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
tApsProtectionType The value of tApsProtectionType specifies the protection type of the APS group. The valid options are: onePlusOneSignalling (1) -- Signalling is 1+1, data is 1:1. onePlusOne (2) -- Both signalli…	Enumerationr/w Enumerated Values: 1 onePlusOneSignalling 2 onePlusOne	.1.3.6.1.4.1.6527.3.1.2.29.5.1.1
tApsLineSFHoldTime The value of tApsLineSFHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Failure due to lais or b2err-sf.	decisecondsUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.29.5.1.2
tApsLineSDHoldTime The value of tApsLineSDHoldTime specifies the time, in 100s of milliseconds, that the APS group will remain operational up before reporting a Line Signal Degradation due to b2err-sd.	decisecondsUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.29.5.1.3
tApsRdiAlarmGeneration The value of tApsRdiAlarmGeneration specifies the method used to generate RDI alarms on all levels (line, path) for the APS physical protecting/working ports referenced by apsChanConfigIfIndex. The modifi…	Enumerationr/w Enumerated Values: 0 suppress 1 circuit	.1.3.6.1.4.1.6527.3.1.2.29.5.1.4

tApsGroupCommandTable augments APS-MIB::apsConfigTable. It contains
command information in addition to the configuration information in
APS-MIB::apsConfigTable.

tApsGroupCommandEntry row .1.3.6.1.4.1.6527.3.1.2.29.6.1

A conceptual row in tApsGroupCommandTable. This row exists only if the
associated apsConfigEntry exists.

Indexes

No indexes recorded

Column	Syntax	OID
tApsAnnexBCommandSwitch The value of tApsAnnexBCommandSwitch specifies the Annex B supported APS switch command applied to the APS group. The supported values: 'noCmd(1)' -- no command was applied to the gr…	Enumerationr/w Enumerated Values: 1 noCmd 2 lockout 3 clearLockout	.1.3.6.1.4.1.6527.3.1.2.29.6.1.1