Standard view Table view

TE-MIB

        The Traffic Engineering MIB module.
        
Copyright (C) The Internet Society (2005).  This
version of this MIB module is part of RFC 3970;
see the RFC itself for full legal notices.
Source file
TE-MIB
Last revised
Identity
teMIB
Base OID
1.3.6.1.2.1.122
Imported Objects
MPLS-TC-STD-MIB MplsBitRate TeHopAddress TeHopAddressType
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC RowStatus StorageType TimeStamp TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'TE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TE-MIB::teMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TE-MIB::teMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (75)
teMIB
.1.3.6.1.2.1.122
teMIBNotifications
.1.3.6.1.2.1.122.0
teMIBObjects
.1.3.6.1.2.1.122.1
teInfo
.1.3.6.1.2.1.122.1.1
teDistProtocol
Bits
 .1.3.6.1.2.1.122.1.1.1
teSignalingProto
Bits
 .1.3.6.1.2.1.122.1.1.2
teNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.122.1.1.3
teNextTunnelIndex
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.1.4
teNextPathHopIndex
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.1.5
teConfiguredTunnels
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.1.6
teActiveTunnels
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.1.7
tePrimaryTunnels
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.1.8
teAdminGroupTable
.1.3.6.1.2.1.122.1.1.9
teAdminGroupEntry
teAdminGroupNumber
 .1.3.6.1.2.1.122.1.1.9.1
teAdminGroupNumber
Integer32
 .1.3.6.1.2.1.122.1.1.9.1.1
teAdminGroupName r/w
OctetString
 .1.3.6.1.2.1.122.1.1.9.1.2
teAdminGroupRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.122.1.1.9.1.3
teTunnelTable
.1.3.6.1.2.1.122.1.2
teTunnelEntry
teTunnelIndex
 .1.3.6.1.2.1.122.1.2.1
teTunnelIndex
Unsigned32
 .1.3.6.1.2.1.122.1.2.1.1
teTunnelState
Enumeration
 .1.3.6.1.2.1.122.1.2.1.10
teTunnelDiscontinuityTimer
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.122.1.2.1.11
teTunnelOctets
SNMPv2-SMICounter64
 .1.3.6.1.2.1.122.1.2.1.12
teTunnelPackets
SNMPv2-SMICounter64
 .1.3.6.1.2.1.122.1.2.1.13
teTunnelLPOctets
SNMPv2-SMICounter32
 .1.3.6.1.2.1.122.1.2.1.14
teTunnelLPPackets
SNMPv2-SMICounter32
 .1.3.6.1.2.1.122.1.2.1.15
teTunnelAge
SNMPv2-SMITimeTicks
 .1.3.6.1.2.1.122.1.2.1.16
teTunnelTimeUp
SNMPv2-SMITimeTicks
 .1.3.6.1.2.1.122.1.2.1.17
teTunnelPrimaryTimeUp
SNMPv2-SMITimeTicks
 .1.3.6.1.2.1.122.1.2.1.18
teTunnelTransitions
SNMPv2-SMICounter32
 .1.3.6.1.2.1.122.1.2.1.19
teTunnelName r/w
OctetString
 .1.3.6.1.2.1.122.1.2.1.2
teTunnelLastTransition
SNMPv2-SMITimeTicks
 .1.3.6.1.2.1.122.1.2.1.20
teTunnelPathChanges
SNMPv2-SMICounter32
 .1.3.6.1.2.1.122.1.2.1.21
teTunnelLastPathChange
SNMPv2-SMITimeTicks
 .1.3.6.1.2.1.122.1.2.1.22
teTunnelConfiguredPaths
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.2.1.23
teTunnelStandbyPaths
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.2.1.24
teTunnelOperationalPaths
SNMPv2-SMIGauge32
 .1.3.6.1.2.1.122.1.2.1.25
teTunnelNextPathIndex
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.2.1.3
teTunnelRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.122.1.2.1.4
teTunnelStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.122.1.2.1.5
teTunnelSourceAddressType r/w
MPLS-TC-STD-MIBTeHopAddressType
 .1.3.6.1.2.1.122.1.2.1.6
teTunnelSourceAddress r/w
MPLS-TC-STD-MIBTeHopAddress
 .1.3.6.1.2.1.122.1.2.1.7
teTunnelDestinationAddressType r/w
MPLS-TC-STD-MIBTeHopAddressType
 .1.3.6.1.2.1.122.1.2.1.8
teTunnelDestinationAddress r/w
MPLS-TC-STD-MIBTeHopAddress
 .1.3.6.1.2.1.122.1.2.1.9
tePathTable
.1.3.6.1.2.1.122.1.3
tePathEntry
teTunnelIndextePathIndex
 .1.3.6.1.2.1.122.1.3.1
tePathIndex
Unsigned32
 .1.3.6.1.2.1.122.1.3.1.1
tePathExclude r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.10
tePathSetupPriority r/w
Integer32
 .1.3.6.1.2.1.122.1.3.1.11
tePathHoldPriority r/w
Integer32
 .1.3.6.1.2.1.122.1.3.1.12
tePathProperties r/w
Bits
 .1.3.6.1.2.1.122.1.3.1.13
tePathOperStatus
Enumeration
 .1.3.6.1.2.1.122.1.3.1.14
tePathAdminStatus r/w
Enumeration
 .1.3.6.1.2.1.122.1.3.1.15
tePathComputedRoute
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.16
tePathRecordedRoute
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.17
tePathName r/w
OctetString
 .1.3.6.1.2.1.122.1.3.1.2
tePathRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.122.1.3.1.3
tePathStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.122.1.3.1.4
tePathType r/w
Enumeration
 .1.3.6.1.2.1.122.1.3.1.5
tePathConfiguredRoute r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.6
tePathBandwidth r/w
Kilobits per secondMPLS-TC-STD-MIBMplsBitRate
 .1.3.6.1.2.1.122.1.3.1.7
tePathIncludeAny r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.8
tePathIncludeAll r/w
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.122.1.3.1.9
tePathHopTable
.1.3.6.1.2.1.122.1.4
tePathHopEntry
teHopListIndextePathHopIndex
 .1.3.6.1.2.1.122.1.4.1
teHopListIndex
Unsigned32
 .1.3.6.1.2.1.122.1.4.1.1
tePathHopIndex
Unsigned32
 .1.3.6.1.2.1.122.1.4.1.2
tePathHopRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.122.1.4.1.3
tePathHopStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.122.1.4.1.4
tePathHopAddrType r/w
MPLS-TC-STD-MIBTeHopAddressType
 .1.3.6.1.2.1.122.1.4.1.5
tePathHopAddress r/w
MPLS-TC-STD-MIBTeHopAddress
 .1.3.6.1.2.1.122.1.4.1.6
tePathHopType
Enumeration
 .1.3.6.1.2.1.122.1.4.1.7
teMIBConformance
.1.3.6.1.2.1.122.2
teGroups
.1.3.6.1.2.1.122.2.1
teModuleCompliance
.1.3.6.1.2.1.122.2.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. MPLS-TC-STD-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMP-FRAMEWORK-MIBrfc
  6. TE-MIBrfcselected
Conformance Groups (2)
teTrafficEngineeringGroup
teTunnelName teTunnelNextPathIndex teTunnelRowStatus teTunnelStorageType teTunnelSourceAddressType teTunnelSourceAddress teTunnelDestinationAddressType teTunnelDestinationAddress teTunnelState teTunnelDiscontinuityTimer teTunnelOctets teTunnelPackets teTunnelLPOctets teTunnelLPPackets teTunnelAge teTunnelTimeUp teTunnelPrimaryTimeUp teTunnelTransitions teTunnelLastTransition teTunnelPathChanges teTunnelLastPathChange teTunnelConfiguredPaths teTunnelStandbyPaths teTunnelOperationalPaths tePathBandwidth tePathIncludeAny tePathIncludeAll tePathExclude tePathSetupPriority tePathHoldPriority tePathProperties tePathOperStatus tePathAdminStatus tePathComputedRoute tePathRecordedRoute teDistProtocol teSignalingProto teNotificationEnable teNextTunnelIndex teNextPathHopIndex teAdminGroupName teAdminGroupRowStatus teConfiguredTunnels teActiveTunnels tePrimaryTunnels tePathName tePathType tePathRowStatus tePathStorageType tePathConfiguredRoute tePathHopRowStatus tePathHopStorageType tePathHopAddrType tePathHopAddress tePathHopType
Objects for Traffic Engineering in this MIB module.
 .1.3.6.1.2.1.122.2.1.1
teNotificationGroup
teTunnelUp teTunnelDown teTunnelChanged teTunnelRerouted
Notifications specified in this MIB module.
 .1.3.6.1.2.1.122.2.1.2
Compliance Statements (4)

OID .1.3.6.1.2.1.122.2.2.1
When this MIB module is implemented without support
for read-create (i.e., in read-only mode), then such
an implementation can claim read-only compliance.
Such a device can be monitored but cannot be
configured with this MIB module.
Required groups
mandatory teTrafficEngineeringGroup
optional teNotificationGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
teNotificationEnable readonly
Write access is not required.
teAdminGroupName readonly
Write access is not required.
teAdminGroupRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
teTunnelName readonly
Write access is not required.
teTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
teTunnelStorageType readonly
Write access is not required.
teTunnelSourceAddressType readonly
MPLS-TC-STD-MIBTeHopAddressType
ipv4(1), ipv6(2)
Write access is not required. An
implementation is only required to support
IPv4 and IPv6 host addresses.
teTunnelSourceAddress readonly
Write access is not required.
teTunnelDestinationAddressType readonly
Write access is not required.
teTunnelDestinationAddress readonly
Write access is not required.
tePathName readonly
Write access is not required.
tePathRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
tePathStorageType readonly
Write access is not required.
tePathType readonly
Write access is not required.
tePathConfiguredRoute readonly
Write access is not required.
tePathBandwidth readonly
Write access is not required.
tePathIncludeAny readonly
Write access is not required.
tePathIncludeAll readonly
Write access is not required.
tePathExclude readonly
Write access is not required.
tePathSetupPriority readonly
Write access is not required.
tePathHoldPriority readonly
Write access is not required.
tePathProperties readonly
Write access is not required.
tePathAdminStatus readonly
Write access is not required.
tePathHopRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
tePathHopStorageType readonly
Write access is not required.
tePathHopAddrType readonly
Write access is not required.
tePathHopAddress readonly
Write access is not required.

OID .1.3.6.1.2.1.122.2.2.2
When this MIB module is implemented with support for
read-create, then the implementation can claim
full compliance. Such devices can be both

monitored and configured with this MIB module.
Required groups
mandatory teTrafficEngineeringGroup
optional teNotificationGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
teAdminGroupRowStatus
SNMPv2-TCRowStatus
active(1)
Support for notInService, createAndWait and
notReady is not required.
teTunnelRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.
teTunnelSourceAddressType
MPLS-TC-STD-MIBTeHopAddressType
ipv4(1), ipv6(2)
Write access is required. An implementation is
only required to support IPv4 and IPv6 host
addresses.
tePathRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.
tePathHopRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.

OID .1.3.6.1.2.1.122.2.2.3
When this MIB module is implemented by a path
computation server without support for read-create
(i.e., in read-only mode), then the implementation
can claim read-only compliance. Such
a device can be monitored but cannot be
configured with this MIB module.
Required groups
mandatory teTrafficEngineeringGroup
optional teNotificationGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
teNotificationEnable readonly
Write access is not required.
teAdminGroupName readonly
Write access is not required.
teAdminGroupRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
teTunnelName readonly
Write access is not required.
teTunnelRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
teTunnelStorageType readonly
Write access is not required.
teTunnelSourceAddressType readonly
Write access is not required. A path
computation server SHOULD implement all types
of tunnel source address types.
teTunnelSourceAddress readonly
Write access is not required.
teTunnelDestinationAddressType readonly
Write access is not required.
teTunnelDestinationAddress readonly
Write access is not required.
tePathName readonly
Write access is not required.
tePathRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
tePathStorageType readonly
Write access is not required.
tePathType readonly
Write access is not required.
tePathConfiguredRoute readonly
Write access is not required.
tePathBandwidth readonly
Write access is not required.
tePathIncludeAny readonly
Write access is not required.
tePathIncludeAll readonly
Write access is not required.
tePathExclude readonly
Write access is not required.
tePathSetupPriority readonly
Write access is not required.
tePathHoldPriority readonly
Write access is not required.
tePathProperties readonly
Write access is not required.
tePathAdminStatus readonly
Write access is not required.
tePathHopRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.
tePathHopStorageType readonly
Write access is not required.
tePathHopAddrType readonly
Write access is not required.
tePathHopAddress readonly
Write access is not required.

OID .1.3.6.1.2.1.122.2.2.4
When this MIB module is implemented by a path
computation server with support for read-create,
then the implementation can claim full
compliance.
Required groups
mandatory teTrafficEngineeringGroup
optional teNotificationGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
teAdminGroupRowStatus
SNMPv2-TCRowStatus
active(1)
Support for notInService, createAndWait, and
notReady is not required.
teTunnelRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.
teTunnelSourceAddressType
Write access is required. An implementation
of a path computation server SHOULD support all
types of tunnel source address types.
tePathRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.
tePathHopRowStatus
SNMPv2-TCRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is not
required.
Notifications / Traps (4)
NameOIDDescription
teTunnelUp
teTunnelName tePathName
.1.3.6.1.2.1.122.0.1
A teTunnelUp notification is generated when the
Tunnel indexed by teTunnelName transitions to the
'up' state.

A tunnel is up when at least one of its paths is up.
The tePathName is the name of the path whose
transition to up made the tunnel go up.

This notification MUST be limited to at most one
every minute, in case the tunnel flaps up and down.
teTunnelDown
teTunnelName tePathName
.1.3.6.1.2.1.122.0.2
A teTunnelDown notification is generated when the
Tunnel indexed by teTunnelName transitions to the
'down' state.

A tunnel is up when at least one of its paths is up.
The tePathName is the name of the path whose
transition to down made the tunnel go down.

This notification MUST be limited to at most one
every minute, in case the tunnel flaps up and down.
teTunnelChanged
teTunnelName tePathName
.1.3.6.1.2.1.122.0.3
A teTunnelChanged notification is generated when an
active path on the Tunnel indexed by teTunnelName
changes or a new path becomes active. The value
of tePathName is the new active path.

This notification MUST be limited to at most one
every minute, in case the tunnel changes quickly.
teTunnelRerouted
teTunnelName tePathName
.1.3.6.1.2.1.122.0.4
A teTunnelRerouted notification is generated when
an active path for the Tunnel indexed by
teTunnelName stays the same, but its route changes.

This notification MUST be limited to at most one
every minute, in case the tunnel reroutes quickly.