T11-FC-SP-POLICY-MIB Table View

A table containing top-level information about active
FC-SP policies on various Fabrics.

t11FcSpPoEntry row .1.3.6.1.2.1.178.1.1.1.1

Each entry contains information about active FC-SP policies
for a particular Fabric, managed as part of the Fibre
Channel management instance identified by fcmInstanceIndex.

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex

Column	Syntax	OID
t11FcSpPoFabricIndex An index value that uniquely identifies a particular Fabric.	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.178.1.1.1.1.1
t11FcSpPoPolicySummaryObjName The name of this Fabric's (active) Policy Summary Object.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.1.1.1.2
t11FcSpPoAdminFabricName The administratively-specified name for this Fabric, as specified in the active Switch Membership List Object. This value is meaningful only when Static Domain_IDs are in use in a Fabric (see FC-SW-4). Static Domain_ID…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.1.1.1.3
t11FcSpPoActivatedTimeStamp The value of sysUpTime at which this Fabric's Policy Summary Object was last activated, or zero if the same Policy Summary Object has been active since the last restart of the management system.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.178.1.1.1.1.4

A table of information about active Policy Objects listed
within FC-SP Policy Summary Objects.

t11FcSpPoSummaryEntry row .1.3.6.1.2.1.178.1.1.2.1

Each entry contains information about one of the active
Policy Objects listed within the Policy Summary Object for
the Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance i…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoSummaryPolicyNameType t11FcSpPoSummaryPolicyName

Column	Syntax	OID
t11FcSpPoSummaryPolicyNameType The combination of t11FcSpPoSummaryPolicyNameType and t11FcSpPoSummaryPolicyName specify the name of the Policy Object contained in the Policy Summary Object. The type of name is 'nodeName' if the value o…	Enumeration Enumerated Values: 1 nodeName 7 alphaNumericName	.1.3.6.1.2.1.178.1.1.2.1.1
t11FcSpPoSummaryPolicyName The combination of t11FcSpPoSummaryPolicyNameType and t11FcSpPoSummaryPolicyName specify the name of the Policy Object contained in the Policy Summary Object.	T11-FC-SP-TC-MIBT11FcSpPolicyName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.1.2.1.2
t11FcSpPoSummaryPolicyType The 'Identifier' that specifies the type of this Policy Object.	T11-FC-SP-TC-MIBT11FcSpPolicyObjectType Type Values: 1 summary 2 switchMemberList 3 nodeMemberList 4 switchConnectivity 5 ipMgmtList 6 attribute	.1.3.6.1.2.1.178.1.1.2.1.3
t11FcSpPoSummaryHashFormat The format of this Policy Object's hash value as contained in the corresponding instance of the t11FcSpPoSummaryHashValue object.	T11-FC-SP-TC-MIBT11FcSpPolicyHashFormat Type Constraints: range: 4	.1.3.6.1.2.1.178.1.1.2.1.4
t11FcSpPoSummaryHashValue The hash value of this Policy Object, in the format identified by the corresponding instance of the t11FcSpPoSummaryHashFormat object.	T11-FC-SP-TC-MIBT11FcSpPolicyHashValue Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.1.2.1.5

A table of Switch Entries in active Switch Membership List
Objects.
          
One Switch Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

t11FcSpPoSwMembEntry row .1.3.6.1.2.1.178.1.1.3.1

Each entry contains information about one Switch Entry
within the active Switch Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identifie…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoSwMembSwitchNameType t11FcSpPoSwMembSwitchName

Column	Syntax	OID
t11FcSpPoSwMembSwitchNameType If the value of this object is 'nodeName' or 'restrictedNodeName', then the combination of this object and t11FcSpPoSwMembSwitchName specify the Switch Name of this Switch Entry. The membership is restric…	Enumeration Enumerated Values: 1 nodeName 2 restrictedNodeName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.1.3.1.1
t11FcSpPoSwMembSwitchName When the value of t11FcSpPoSwMembSwitchNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoSwMembSwitchNameType and this o…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.1.3.1.2
t11FcSpPoSwMembSwitchFlags Configurable options in respect to the administration of Policy Objects at this Switch: 'staticDomainID' - if this bit is set, the Switch uses the 'Static Domain_IDs behavior' (as defined in FC-SW…	Bits Enumerated Values: 0 staticDomainID 1 insistentDomainID 2 serialPortsAccess 3 physicalPortsAccess 4 managerRole	.1.3.6.1.2.1.178.1.1.3.1.3
t11FcSpPoSwMembDomainID The specified Domain_ID value when either of the 'staticDomainID' or 'insistentDomainID' bits are set in the corresponding instance of t11FcSpPoSwMembSwitchFlags. Whenever a Fabric has Active Policy Objec…	FC-MGMT-MIBFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.2.1.178.1.1.3.1.4
t11FcSpPoSwMembPolicyDataRole The role of the Switch in terms of which Policy data it retains/maintains: 'client' - the Switch operates as a Client Switch. A Client Switch maintains its own Switch Connectivity Object and all Fabric-…	Enumeration Enumerated Values: 1 client 2 autonomous 3 server	.1.3.6.1.2.1.178.1.1.3.1.5
t11FcSpPoSwMembAuthBehaviour The authentication behaviour of the Switch: 'mustAuthenticate' - if this bit is set, all connections between this Switch and neighbor Switches must be authenticated. 'rejectIsFailure' - if …	Bits Enumerated Values: 0 mustAuthenticate 1 rejectIsFailure	.1.3.6.1.2.1.178.1.1.3.1.6
t11FcSpPoSwMembAttribute The name of an active Attribute Policy Object that is defined for this Switch, or the zero-length string. The zero-length string indicates that no Attribute Policy Object is defined for this Switch.	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsent Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.1.3.1.7

A table of Node Entries in active Node Membership List
Objects.
          
One Node Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

t11FcSpPoNoMembEntry row .1.3.6.1.2.1.178.1.1.4.1

Each entry contains information about one Node Entry
within the active Node Membership List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identified
by…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNoMembNodeNameType t11FcSpPoNoMembNodeName

Column	Syntax	OID
t11FcSpPoNoMembNodeNameType If the value of this object is 'wildcard' or 'restrictedWildcard', this Node Entry applies to Nodes not explicitly named in the Node Membership List Object. Otherwise, the combination of this object and t…	Enumeration Enumerated Values: 1 nodeName 2 restrictedNodeName 3 portName 4 restrictedPortName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.1.4.1.1
t11FcSpPoNoMembNodeName If the value of t11FcSpPoNoMembNodeNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoNoMembNodeNameType and this object …	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.1.4.1.2
t11FcSpPoNoMembFlags Configurable options in respect to the administration of Policy Objects at this Node: 'scsiEnclosureAccess' - the Node is allowed to control any Switch through SCSI Enclosure Services if this bi…	Bits Enumerated Values: 0 scsiEnclosureAccess 1 authenticationRequired	.1.3.6.1.2.1.178.1.1.4.1.3
t11FcSpPoNoMembCtAccessIndex If the value of this object is zero, then access by this Node to Generic Services is not limited by a Common Transport Access Specifier. Otherwise, the limits are specified by the set of Common Transport …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.1.4.1.4
t11FcSpPoNoMembAttribute The name of an active Attribute Policy Object that is defined for this Node, or the zero-length string. The zero-length string indicates that no Attribute Policy Object is defined for this Node.	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsent Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.1.4.1.5

A table of Common Transport Access Descriptors being used
within active Policy Objects.
          
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
          
An active Common Transport Access Specifier is represented
by all rows of this table that have the same values of
fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoCtDescrSpecifierIndex.

t11FcSpPoCtDescrEntry row .1.3.6.1.2.1.178.1.1.5.1

Each entry contains information about one Common
Transport Access Descriptor of an active Common Transport
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoCtDescrSpecifierIndex t11FcSpPoCtDescrIndex

Column	Syntax	OID
t11FcSpPoCtDescrSpecifierIndex An index value that uniquely identifies a particular Common Transport Access Specifier within a Fabric.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.5.1.1
t11FcSpPoCtDescrIndex An index value that uniquely identifies a particular Common Transport Access Descriptor within a Common Transport Access Specifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.5.1.2
t11FcSpPoCtDescrFlags The flag bits that specify how access is to be limited by this Common Transport Access Descriptor: - allow -- access to the specified Generic Service and Server is allowed if this bit is set, and is t…	Bits Enumerated Values: 0 allow 1 gsTypeWildcard 2 gsSubTypeWildcard 3 readOnly	.1.3.6.1.2.1.178.1.1.5.1.3
t11FcSpPoCtDescrGsType The GS_Type of the Generic Service (e.g., the FC-GS-5 Management Service) that is subject to access control. This value is ignored if the gsTypeWildcard bit is not set in the corresponding value of t11FcSpPoCtDescrFlags.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.178.1.1.5.1.4
t11FcSpPoCtDescrGsSubType The GS_Subtype of the Generic Server (e.g., the Fabric Zone Server) that is subject to access control. This value is ignored if the gsSubTypeWildcard bit is not set in the corresponding value of t11FcSpPoCtDescrFlags.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.178.1.1.5.1.5

A table of active Switch Connectivity Objects.
          
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level.

t11FcSpPoSwConnEntry row .1.3.6.1.2.1.178.1.1.6.1

Each entry contains the name of either a Switch or a Node
with which any port of a particular Switch, or a particular
port of that Switch, is allowed or not allowed to be
connected.

The particular Switch is…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoSwConnSwitchName t11FcSpPoSwConnAllowedType t11FcSpPoSwConnPortNameOrAll t11FcSpPoSwConnAllowedIndex

Column	Syntax	OID
t11FcSpPoSwConnSwitchName The name of the particular Switch for which this Switch Connectivity Object specifies topology restrictions.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.1.6.1.1
t11FcSpPoSwConnAllowedType This object specifies whether this row refers to Switch-to-Switch or Switch-to-Node connectivity, i.e., whether the corresponding instance of t11FcSpPoSwConnAllowedName specifies the name of a Switch or the name of a No…	Enumeration Enumerated Values: 1 switch 2 node	.1.3.6.1.2.1.178.1.1.6.1.2
t11FcSpPoSwConnPortNameOrAll This object specifies either the particular port to which this topology restriction applies, or if the value is the zero-length string, that the topology restriction applies to all ports on the particular Switch. …	OctetString Constraints: range: 0-0 range: 8-8	.1.3.6.1.2.1.178.1.1.6.1.3
t11FcSpPoSwConnAllowedIndex When multiple rows in this table apply to the same port(s) in the same Switch's Switch Connectivity Object, this object provides a unique index value to distinguish between such rows.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.6.1.4
t11FcSpPoSwConnAllowedNameType If the value of this object is 'wildcard' or 'restrictedWildcard', this row specifies whether connectivity is allowed/not allowed with entities not explicitly named by other rows. Otherwise, the combinati…	Enumeration Enumerated Values: 1 nodeName 2 restrictedNodeName 3 portName 4 restrictedPortName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.1.6.1.5
t11FcSpPoSwConnAllowedName If the value of t11FcSpPoSwConnAllowedNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoSwConnAllowedNameType and t11FcS…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.1.6.1.6

A table of IP Management Entries in active IP Management
List Objects.  An IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts
are allowed to manage a Fabric.
          
One IP Management List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

t11FcSpPoIpMgmtEntry row .1.3.6.1.2.1.178.1.1.7.1

Each entry contains information about one IP Management
Entry within the active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management instance identi…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoIpMgmtEntryNameType t11FcSpPoIpMgmtEntryNameLow t11FcSpPoIpMgmtEntryNameHigh

Column	Syntax	OID
t11FcSpPoIpMgmtEntryNameType The combination of t11FcSpPoIpMgmtNameType, t11FcSpPoIpMgmtNameLow, and t11FcSpPoIpMgmtNameHigh specify the Internet address range of this IP Management Entry in the IP Management List Object. The FC-SP s…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.178.1.1.7.1.1
t11FcSpPoIpMgmtEntryNameLow The lower end of an Internet address range. The type of this address is given by the corresponding instance of t11FcSpPoIpMgmtEntryNameType. The combination of t11FcSpPoIpMgmtNameType, t11FcSpPoIpMgmtNam…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.2.1.178.1.1.7.1.2
t11FcSpPoIpMgmtEntryNameHigh The higher end of an Internet address range. The type of this address is given by the corresponding instance of t11FcSpPoIpMgmtEntryNameType. The combination of t11FcSpPoIpMgmtNameType, t11FcSpPoIpMgmtNa…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.2.1.178.1.1.7.1.3
t11FcSpPoIpMgmtWkpIndex This object identifies the restrictions for IP management access by IP hosts in this range of IP addresses, specified as the set of Well-Known Protocols Access Descriptors contained in those rows of the t11FcSpPoWkpDesc…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.1.7.1.4
t11FcSpPoIpMgmtAttribute The name of an active Attribute Policy Object that is defined for this IP Management entry or the zero-length string. The zero-length string indicates that no Attribute Policy Object is defined for this IP Management e…	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsent Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.1.7.1.5

A table of the Well-Known Protocol Access Descriptors
being used within active Policy Objects.
          
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
          
A Well-Known Protocol Transport Access Specifier is
represented by all rows of this table that have the
same values of fcmInstanceIndex, t11FcSpPoFabricIndex,
and t11FcSpPoWkpDescrSpecifierIndex.

t11FcSpPoWkpDescrEntry row .1.3.6.1.2.1.178.1.1.8.1

Each entry contains information about one Well-Known
Protocol Access Descriptor of a Well-Known Protocol
Access Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
ma…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoWkpDescrSpecifierIndex t11FcSpPoWkpDescrIndex

Column	Syntax	OID
t11FcSpPoWkpDescrSpecifierIndex An index value that uniquely identifies a particular Well-Known Protocol Access Specifier within a Fabric.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.8.1.1
t11FcSpPoWkpDescrIndex An index value that uniquely identifies a particular Well-Known Protocol Access Descriptor within a Well-Known Protocol Access Specifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.8.1.2
t11FcSpPoWkpDescrFlags The flag bits that specify how access is to be limited by this Well-Known Protocol Access Descriptor: - allow -- IP management access using this protocol/port is allowed if this bit is set, and to be …	Bits Enumerated Values: 0 allow 1 wkpWildcard 2 destPortWildcard 3 readOnly	.1.3.6.1.2.1.178.1.1.8.1.3
t11FcSpPoWkpDescrWkpNumber When the 'wkpWildcard' bit is set in the corresponding instance of t11FcSpPoWkpDescrFlags, this object specifies the IP protocol number of the Well-Known Protocol.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.2.1.178.1.1.8.1.4
t11FcSpPoWkpDescrDestPort When the 'destPortWildcard' bit is set in the corresponding instance of t11FcSpPoWkpDescrFlags, this object specifies the Destination (TCP/UDP) Port number of the Well-Known Protocol. When the 'destPortWildcard' bit is…	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.2.1.178.1.1.8.1.5

A table of the Attribute Policy Objects being used within
active Policy Objects.  In the FC-SP Policy Database, each
Attribute Policy Object consists of an Attribute Object Name
and a set of Attribute Entries.
          
An active Attribute Policy Object is represented by all the
Attribute Entries in this table that have the same value
of t11FcSpPoAttribName.

t11FcSpPoAttribEntry row .1.3.6.1.2.1.178.1.1.9.1

Each row contains information specific to an Attribute
Entry contained within an Attribute Policy Object that is
active within the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel managemen…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoAttribName t11FcSpPoAttribEntryIndex t11FcSpPoAttribPartIndex

Column	Syntax	OID
t11FcSpPoAttribName The name of the Attribute Policy Object containing one or more Attribute Entries.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.1.9.1.1
t11FcSpPoAttribEntryIndex A unique value to distinguish this Attribute Entry from other Attribute Entries contained in the same Attribute Policy Object.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.9.1.2
t11FcSpPoAttribPartIndex When the value of an Attribute Entry is shorter than 257 bytes, the whole value is contained in one instance of t11FcSpPoAttribValue, and the value of this object is 1. If the value of an A…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.9.1.3
t11FcSpPoAttribType The type of attribute. The first type to be defined is: t11FcSpPoAttribType t11FcSpPoAttribValue =================== ==================== '00000001'h The AUTH_Negotiate Message Payload	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.9.1.4
t11FcSpPoAttribValue The value of an Attribute Entry is divided up on 256-byte boundaries such that all parts are 256 bytes long except the last part, which is shorter if necessary, and each such part is contained in a separate instance of …	OctetString Constraints: range: 0-256	.1.3.6.1.2.1.178.1.1.9.1.5
t11FcSpPoAttribExtension For some types of Attribute Policy Object, the value of this MIB object points to type-specific MIB objects that contain individual/broken-out parts of the Attribute Policy Object's value. If this object doesn't point …	ObjectIdentifier	.1.3.6.1.2.1.178.1.1.9.1.6

A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within active Policy
Objects.
          
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoAttribType indicates
'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoAttribExtension contains the OID of this table.

t11FcSpPoAuthProtEntry row .1.3.6.1.2.1.178.1.1.10.1

Each entry contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoAttribEntryIndex) of the Policy
Attribute Object (identified by t11FcSpPoAttribName),…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoAttribName t11FcSpPoAttribEntryIndex t11FcSpPoAuthProtIdentifier t11FcSpPoAuthProtPartIndex

Column	Syntax	OID
t11FcSpPoAuthProtIdentifier The Authentication Protocol Identifier: 1 = DH-CHAP 2 = FCAP 3 = FCPAP 4 = IKEv2 5 = IKEv2-AUTH 240 thru 255 = Vendor Specific Protocols all other va…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.1.10.1.1
t11FcSpPoAuthProtPartIndex When the value of an Attribute Protocol Parameters string is shorter than 257 bytes, the whole value is contained in one instance of t11FcSpPoAuthProtParams, and the value of this object is 1. (This includes the case wh…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.1.10.1.2
t11FcSpPoAuthProtParams The value of an Authentication Protocol Parameters string is divided up on 256-byte boundaries such that all parts are 256 bytes long except the last part, which is shorter if necessary, and each such part is contained …	OctetString Constraints: range: 0-256	.1.3.6.1.2.1.178.1.1.10.1.3

A table that allows Activate and Deactivate operations
to be invoked for FC-SP Policies on various Fabrics.
          
Activating a new policy configuration is a two-step
process:
          
 1) create a single Policy Summary Object as a set of rows
    in the t11FcSpPoNaSummaryTable specifying a set of
    Policy Objects that describe the new configuration; and
 2) activate that Policy Summary Object using the
    t11FcSpPoOperActivate object defined in this table.
          
Deactivating the current policy configuration is a one-step
process: the current Policy Summary Object is deactivated
using the t11FcSpPoOperDeActivate object.

t11FcSpPoOperEntry row .1.3.6.1.2.1.178.1.2.1.1

Each entry allows an Activate and/or Deactivate operation
to be invoked on a particular Fabric, which is managed as
part of the Fibre Channel management instance identified
by fcmInstanceIndex.

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex

Column	Syntax	OID
t11FcSpPoOperActivate Writing the name of a Policy Summary Object into this object is a request to activate the policy configuration described by the combination of all rows in t11FcSpPoNaSummaryTable that have that name as their value of t1…	T11-FC-SP-TC-MIBT11FcSpAlphaNumNamer/w Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.2.1.1.1
t11FcSpPoOperDeActivate Writing the current value of t11FcSpPoPolicySummaryObjName into this object (for a particular Fabric) is a request to deactivate that Fabric's current policy configuration. Writing any other value into this object is an…	T11-FC-SP-TC-MIBT11FcSpAlphaNumNamer/w Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.2.1.1.2
t11FcSpPoOperResult This object indicates the status/result of the last activation/deactivation that was invoked via the corresponding instance of t11FcSpPoOperActivate or t11FcSpPoOperDeActivate. When the value of this obje…	Enumeration Enumerated Values: 1 activateSuccess 2 badSummaryObject 3 activateFailure 4 deactivateSuccess 5 deactivateFailure 6 inProgress 7 none	.1.3.6.1.2.1.178.1.2.1.1.3
t11FcSpPoOperFailCause A textual message indicating the reason for the most recent activation/deactivation failure, or the zero-length string if no information is available (e.g., because the corresponding instance of t11FcSpPoOperResult has …	OctetString Constraints: range: 0-64	.1.3.6.1.2.1.178.1.2.1.1.4

A table of non-active Policy Summary Objects available
to be activated.
          
The functionality of this table deviates slightly from FC-SP
in that FC-SP specifies that the only Policy Summary Object
is the Active one, i.e., FC-SP does not store non-active
Policy Summary Objects in the Policy Database.  Instead,
FC-SP requires a new Policy Summary Object to be created
for, and embedded within, every Activate (APS) request.
Thus, the newly created Policy Summary Object outlasts the
APS request only as the new active Policy Summary Object and
only if the APS succeeds.  In contrast, the Activate
operation provided by this MIB module consists of two steps:
          
1) create a non-active Policy Summary Object as a set of
   entries in this table describing a new configuration;
2) activate a Policy Summary Object (stored as a set of
   entries in this table) using t11FcSpPoOperActivate.
          
These two steps are only loosely connected, i.e., the result
of the first operation is a non-active Policy Summary Object
that is retained (in this table) even if it isn't
immediately activated.  Even after an attempt to activate
it succeeds or fails, a non-active Policy Summary Object
is not deleted, but is retained and still available for
subsequent modification/re-use.

t11FcSpPoNaSummaryEntry row .1.3.6.1.2.1.178.1.3.1.1

Each entry contains information about one non-active
Policy Object within a non-active Policy Summary Object
defined for potential use on the Fabric identified by
t11FcSpPoFabricIndex, and managed within the Fibre Chann…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaSummaryName t11FcSpPoNaSummaryPolicyType t11FcSpPoNaSummaryPolicyIndex

Column	Syntax	OID
t11FcSpPoNaSummaryName The name of the non-active Policy Summary Object that contains this Policy Object.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.1.1.1
t11FcSpPoNaSummaryPolicyType The 'Identifier' (i.e., the type) of this Policy Object.	T11-FC-SP-TC-MIBT11FcSpPolicyObjectType Type Values: 1 summary 2 switchMemberList 3 nodeMemberList 4 switchConnectivity 5 ipMgmtList 6 attribute	.1.3.6.1.2.1.178.1.3.1.1.2
t11FcSpPoNaSummaryPolicyIndex A unique integer value to distinguish this Policy Object from any others that have the same type and that are contained in the same Policy Summary Object.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.1.1.3
t11FcSpPoNaSummaryPolicyNameType The combination of t11FcSpPoNaSummaryPolicyNameType and t11FcSpPoNaSummaryPolicyName specify the name of the non-active Policy Object identified by this row. The type of name must be 'nodeName' if the val…	Enumerationr/w Enumerated Values: 1 nodeName 7 alphaNumericName	.1.3.6.1.2.1.178.1.3.1.1.4
t11FcSpPoNaSummaryPolicyName The combination of t11FcSpPoNaSummaryPolicyNameType and t11FcSpPoNaSummaryPolicyName specify the name of the non-active Policy Object identified by this row.	T11-FC-SP-TC-MIBT11FcSpPolicyNamer/w Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.1.1.5
t11FcSpPoNaSummaryHashStatus When read, the value of this object is either: correct -- the corresponding instance of t11FcSpPoNaSummaryHashValue contains the correct value; or stale -- the corresponding instan…	T11-FC-SP-TC-MIBT11FcSpHashCalculationStatusr/w Type Values: 1 calculate 2 correct 3 stale	.1.3.6.1.2.1.178.1.3.1.1.6
t11FcSpPoNaSummaryHashFormat The format of this Policy Object's hash value as contained in the corresponding instance of the t11FcSpPoNaSummaryHashValue object.	T11-FC-SP-TC-MIBT11FcSpPolicyHashFormat Type Constraints: range: 4	.1.3.6.1.2.1.178.1.3.1.1.7
t11FcSpPoNaSummaryHashValue The hash value of this Policy Object, in the format identified by the corresponding instance of the t11FcSpPoNaSummaryHashFormat object.	T11-FC-SP-TC-MIBT11FcSpPolicyHashValue Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.3.1.1.8
t11FcSpPoNaSummaryRowStatus The status of this row. Before a row in this table can have 'active' status, a non-Active Policy Object must already be represented in the table corresponding to the value of t11FcSpPoNaSummaryPolicyType …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.1.1.9

A table of non-active Switch Membership List Objects.

t11FcSpPoNaSwListEntry row .1.3.6.1.2.1.178.1.3.2.1

Each entry contains information about one non-active
Switch Membership List Object for the Fabric identified
by t11FcSpPoFabricIndex and managed within the Fibre

Channel management instance identified by
fc…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaSwListName

Column	Syntax	OID
t11FcSpPoNaSwListName The name of the Switch Membership List Object.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.2.1.1
t11FcSpPoNaSwListFabricName The administratively specified Fabric_Name. This value is meaningful only when static Domain_IDs are used in a Fabric. If Static Domain_IDs are not used, the Fabric_Name is dynamically determined, in which case the va…	FC-MGMT-MIBFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.2.1.178.1.3.2.1.2
t11FcSpPoNaSwListRowStatus The status of this row. Values of object instances within the row can be modified at any time. If a row in this table is deleted, any row in the t11FcSpPoNaSwMembTable for the same Switch Membership List…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.2.1.3

A table of Switch Entries in non-active Switch Membership
List Objects.

t11FcSpPoNaSwMembEntry row .1.3.6.1.2.1.178.1.3.3.1

Each entry contains information about one Switch that
is listed in a Switch Entry of a non-active Switch Membership
List Object for the Fabric identified by t11FcSpPoFabricIndex
and managed within the Fibre Channel mana…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaSwListName t11FcSpPoNaSwMembSwitchNameType t11FcSpPoNaSwMembSwitchName

Column	Syntax	OID
t11FcSpPoNaSwMembSwitchNameType If the value of this object is 'nodeName' or 'restrictedNodeName', then the combination of this object and t11FcSpPoNaSwMembSwitchName specify the Switch Name of this Switch Entry. The membership is restr…	Enumeration Enumerated Values: 1 nodeName 2 restrictedNodeName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.3.3.1.1
t11FcSpPoNaSwMembSwitchName If the value of t11FcSpPoSwMembSwitchNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoNaSwMembSwitchNameType and this o…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.3.3.1.2
t11FcSpPoNaSwMembFlags Configurable options in respect to the administration of Policy Objects at this Switch: 'staticDomainID' - the Switch uses the 'Static Domain_IDs behavior' (as defined in FC-SW-4) when this bit is …	Bitsr/w Enumerated Values: 0 staticDomainID 1 insistentDomainID 2 serialPortsAccess 3 physicalPortsAccess 4 managerRole	.1.3.6.1.2.1.178.1.3.3.1.3
t11FcSpPoNaSwMembDomainID The Domain_ID to be used when either the 'staticDomainID' bit or the 'insistentDomainID' bit is set in the corresponding value of t11FcSpPoNaSwMembFlags.	FC-MGMT-MIBFcDomainIdOrZeror/w Type Constraints: range: 0..239	.1.3.6.1.2.1.178.1.3.3.1.4
t11FcSpPoNaSwMembPolicyDataRole The role of the Switch in terms of which Policy data it retains/maintains: 'client' - the Switch operates as a Client Switch. A Client Switch maintains its own Switch Connectivity Object and all Fabric-…	Enumerationr/w Enumerated Values: 1 client 2 autonomous 3 server	.1.3.6.1.2.1.178.1.3.3.1.5
t11FcSpPoNaSwMembAuthBehaviour The authentication behaviour of the Switch: 'mustAuthenticate' - if this bit is set, all connections between this Switch and neighbor Switches must be authenticated. 'rejectIsFailure' - if …	Bitsr/w Enumerated Values: 0 mustAuthenticate 1 rejectIsFailure	.1.3.6.1.2.1.178.1.3.3.1.6
t11FcSpPoNaSwMembAttribute The name of a non-active Attribute Policy Object that is defined for this Switch. The zero-length string indicates that no non-active Attribute Policy Object is defined for this Switch. The effect of hav…	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsentr/w Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.3.3.1.7
t11FcSpPoNaSwMembRowStatus The status of this row. Values of object instances within the row can be modified at any time. A row cannot exist unless there is a row in the t11FcSpPoNaSwListTable for the Switch Membership List Object…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.3.1.8

A table of Node Entries in non-active Node Membership List
Objects.
          
One Node Membership List Object is represented by all
the rows in this table that have the same value of
t11FcSpPoNaNoMembListName.

t11FcSpPoNaNoMembEntry row .1.3.6.1.2.1.178.1.3.4.1

Each entry contains information about one Node Entry of
a non-active Node Membership List Object for the Fabric
identified by t11FcSpPoFabricIndex and managed within
the Fibre Channel management instance identified by
f…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaNoMembListName t11FcSpPoNaNoMembNodeNameType t11FcSpPoNaNoMembNodeName

Column	Syntax	OID
t11FcSpPoNaNoMembListName The name of the non-active Node Membership List Object.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.4.1.1
t11FcSpPoNaNoMembNodeNameType If the value of this object is 'wildcard' or 'restrictedWildcard', this Node Entry applies to Nodes not explicitly named in the Node Membership List Object. Otherwise, the combination of this object and t…	Enumeration Enumerated Values: 1 nodeName 2 restrictedNodeName 3 portName 4 restrictedPortName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.3.4.1.2
t11FcSpPoNaNoMembNodeName If the value of t11FcSpPoNaNoMembNodeNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoNaNoMembNodeNameType and this obj…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.3.4.1.3
t11FcSpPoNaNoMembFlags Configurable options in respect to the administration of Policy Objects at this Node: 'scsiEnclosureAccess' - the Node is allowed to control any Switch through SCSI Enclosure Services if this bi…	Bitsr/w Enumerated Values: 0 scsiEnclosureAccess 1 authenticationRequired	.1.3.6.1.2.1.178.1.3.4.1.4
t11FcSpPoNaNoMembCtAccessIndex If the value of this object is zero, then access by this Node to Generic Services is not limited by a Common Transport Access Specifier. Otherwise, the limits are specified by the set of Common Transport …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.3.4.1.5
t11FcSpPoNaNoMembAttribute The name of a non-active Attribute Policy Object that is defined for this Node. The zero-length string indicates that no non-active Attribute Policy Object is defined for this Node. The effect of having …	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsentr/w Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.3.4.1.6
t11FcSpPoNaNoMembRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.4.1.7

A table of Common Transport Access Descriptors referenced
by non-active Policy Objects.
          
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
          
A non-active Common Transport Access Specifier is
represented by all rows of this table that have the same
          
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaCtDescrSpecifierIndex.

t11FcSpPoNaCtDescrEntry row .1.3.6.1.2.1.178.1.3.5.1

Each entry contains information about one Common Transport
Access Descriptor of an non-active Common Transport Access
Specifier used within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Chan…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaCtDescrSpecifierIndex t11FcSpPoNaCtDescrIndex

Column	Syntax	OID
t11FcSpPoNaCtDescrSpecifierIndex An index value that uniquely identifies a particular Common Transport Access Specifier within a Fabric.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.5.1.1
t11FcSpPoNaCtDescrIndex An index value that uniquely identifies a particular Common Transport Access Descriptor within a Common Transport Access Specifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.5.1.2
t11FcSpPoNaCtDescrFlags The flag bits that specify how access is to be limited by this Common Transport Access Descriptor: - allow -- access to the specified Generic Service and Server is allowed if this bit is set, and is t…	Bitsr/w Enumerated Values: 0 allow 1 gsTypeWildcard 2 gsSubTypeWildcard 3 readOnly	.1.3.6.1.2.1.178.1.3.5.1.3
t11FcSpPoNaCtDescrGsType The GS_Type of the Generic Service (e.g., the FC-GS-5 Management Service) that is subject to access control. This value is ignored if the gsTypeWildcard bit is not set in the corresponding value of t11FcS…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.2.1.178.1.3.5.1.4
t11FcSpPoNaCtDescrGsSubType The GS_Subtype of the Generic Server (e.g., the Fabric Zone Server) that is subject to access control. This value is ignored if the gsSubTypeWildcard bit is not set in the corresponding value of t11FcSpPoNaCtDescrFlags.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.2.1.178.1.3.5.1.5
t11FcSpPoNaCtDescrRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.5.1.6

A table of non-active Switch Connectivity Objects.
          
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level.

t11FcSpPoNaSwConnEntry row .1.3.6.1.2.1.178.1.3.6.1

Each entry contains the name of a Switch/Node with which
any port of a particular Switch on a particular Fabric, or
a particular port on that Switch, is allowed or not allowed
to be connected.

The particula…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaSwConnSwitchName t11FcSpPoNaSwConnAllowedType t11FcSpPoNaSwConnPortNameOrAll t11FcSpPoNaSwConnAllowedIndex

Column	Syntax	OID
t11FcSpPoNaSwConnSwitchName The name of the Switch for which this Switch Connectivity Object specifies topology restrictions.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.178.1.3.6.1.1
t11FcSpPoNaSwConnAllowedType This object specifies whether this row refers to an 'Allowed Switch' that concerns Switch-to-Switch connectivity or an 'Allowed Node' that concerns Switch-to-Node connectivity. Consequently, this object's value indicat…	Enumeration Enumerated Values: 1 switch 2 node	.1.3.6.1.2.1.178.1.3.6.1.2
t11FcSpPoNaSwConnPortNameOrAll This object specifies either the particular port on which this topology restriction applies, or if the value is the zero-length string, that the topology restriction applies to all ports of the Switch. In…	OctetString Constraints: range: 0-0 range: 8-8	.1.3.6.1.2.1.178.1.3.6.1.3
t11FcSpPoNaSwConnAllowedIndex When multiple rows in this table refer to different 'Allowed Switches' or to different 'Allowed Nodes' for the same port(s) in the same Switch Connectivity Object, this object provides a unique index value to distinguis…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.6.1.4
t11FcSpPoNaSwConnAllowedNameType If the value of this object is 'wildcard' or 'restrictedWildcard', this row specifies whether connectivity is allowed/not allowed with entities not explicitly named by other rows. Otherwise, the combinati…	Enumerationr/w Enumerated Values: 1 nodeName 2 restrictedNodeName 3 portName 4 restrictedPortName 5 wildcard 6 restrictedWildcard	.1.3.6.1.2.1.178.1.3.6.1.5
t11FcSpPoNaSwConnAllowedName If t11FcSpPoNaSwConnAllowedNameType has the value 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'h. Otherwise, the combination of t11FcSpPoNaSwConnAllowedNameType and t11F…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.2.1.178.1.3.6.1.6
t11FcSpPoNaSwConnRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.6.1.7

A table of IP Management Entries in non-active IP
Management List Objects.  The IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts are
allowed to manage a Fabric.
          
One non-active IP Management List Object is represented by
all rows of this table that have the same values of
fcmInstanceIndex and t11FcSpPoFabricIndex.

t11FcSpPoNaIpMgmtEntry row .1.3.6.1.2.1.178.1.3.7.1

Each entry contains information about one IP Management

entry within a non-active IP Management List Object for the
Fabric identified by t11FcSpPoFabricIndex and managed
within the Fibre Channel management …

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaIpMgmtListName t11FcSpPoNaIpMgmtEntryNameType t11FcSpPoNaIpMgmtEntryNameLow t11FcSpPoNaIpMgmtEntryNameHigh

Column	Syntax	OID
t11FcSpPoNaIpMgmtListName The name of a non-active Node Membership List Object.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.7.1.1
t11FcSpPoNaIpMgmtEntryNameType The combination of t11FcSpPoNaIpMgmtEntryNameType, t11FcSpPoNaIpMgmtNameLow, and t11FcSpPoNaIpMgmtNameHigh specify the Internet address range of this IP Management Entry in the IP Management List Object. …	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.2.1.178.1.3.7.1.2
t11FcSpPoNaIpMgmtEntryNameLow The lower end of an Internet address range. The type of this address is given by the corresponding instance of t11FcSpPoNaIpMgmtEntryNameType. The combination of t11FcSpPoNaIpMgmtEntryNameType, t11FcSpPo…	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.2.1.178.1.3.7.1.3
t11FcSpPoNaIpMgmtEntryNameHigh The higher end of an Internet address range. The type of this address is given by the corresponding instance of t11FcSpPoNaIpMgmtEntryNameType. The combination of t11FcSpPoNaIpMgmtEntryNameType, t11FcSpP…	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.2.1.178.1.3.7.1.4
t11FcSpPoNaIpMgmtWkpIndex This object identifies the restrictions for IP management access by IP hosts in this range of IP addresses. The restrictions are specified as the set of Well-Known Protocols Access Descriptors contained i…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.3.7.1.5
t11FcSpPoNaIpMgmtAttribute The name of a non-active Attribute Policy Object that is defined for this IP Management entry. The zero-length string indicates that no non-active Attribute Policy Object is defined for it. The effect of…	T11-FC-SP-TC-MIBT11FcSpAlphaNumNameOrAbsentr/w Type Constraints: range: 0..64	.1.3.6.1.2.1.178.1.3.7.1.6
t11FcSpPoNaIpMgmtRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.7.1.7

A table of the Well-Known Protocol Access Descriptors
referenced from non-active Policy Objects.
          
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
          
A non-active Well-Known Protocol Transport Access Specifier
is represented by all rows of this table that have the same
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaWkpDescrSpecifierIndx.

t11FcSpPoNaWkpDescrEntry row .1.3.6.1.2.1.178.1.3.8.1

Each entry contains information about one Well-Known

Protocol Access Descriptor of a non-active Well-Known
Protocol Access Specifier used within the Fabric identified
by t11FcSpPoFabricIndex and managed wit…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaWkpDescrSpecifierIndx t11FcSpPoNaWkpDescrIndex

Column	Syntax	OID
t11FcSpPoNaWkpDescrSpecifierIndx An index value that uniquely identifies a particular non-active Well-Known Protocol Access Specifier within a Fabric.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.8.1.1
t11FcSpPoNaWkpDescrIndex An index value that uniquely identifies a particular Well-Known Protocol Access Descriptor within a non-active Well-Known Protocol Access Specifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.8.1.2
t11FcSpPoNaWkpDescrFlags The flag bits that specify how access is to be limited by this Well-Known Protocol Access Descriptor: - allow -- IP management access using this protocol/port is allowed if this bit is set, and to be …	Bitsr/w Enumerated Values: 0 allow 1 wkpWildcard 2 destPortWildcard 3 readOnly	.1.3.6.1.2.1.178.1.3.8.1.3
t11FcSpPoNaWkpDescrWkpNumber When the 'wkpWildcard' bit is set in the corresponding instance of t11FcSpPoNaWkpDescrFlags, this object specifies the IP protocol number of the Well-Known Protocol.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.2.1.178.1.3.8.1.4
t11FcSpPoNaWkpDescrDestPort When the 'destPortWildcard' bit is set in the corresponding instance of t11FcSpPoNaWkpDescrFlags, this object specifies the Destination (TCP/UDP) Port number of the Well-Known Protocol. When the 'destPortWildcard' bit …	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.178.1.3.8.1.5
t11FcSpPoNaWkpDescrRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.8.1.6

A table of the Attribute Policy Objects being used within
non-active Policy Objects.
          
A non-active Attribute Policy Object is represented by all
the Attribute Entries in this table that have the same
value of t11FcSpPoNaAttribName.

t11FcSpPoNaAttribEntry row .1.3.6.1.2.1.178.1.3.9.1

Each entry contains information about one Attribute
Entry contained within an Attribute Policy Object
that is non-active within the Fabric identified by
t11FcSpPoFabricIndex and managed within the Fibre Channel
manageme…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaAttribName t11FcSpPoNaAttribEntryIndex t11FcSpPoNaAttribPartIndex

Column	Syntax	OID
t11FcSpPoNaAttribName The name of the Attribute Policy Object containing one or more Attribute Entries.	T11-FC-SP-TC-MIBT11FcSpAlphaNumName Type Constraints: range: 1..64	.1.3.6.1.2.1.178.1.3.9.1.1
t11FcSpPoNaAttribEntryIndex A unique value to distinguish this Attribute Entry from other Attribute Entries contained in the same Attribute Policy Object.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.9.1.2
t11FcSpPoNaAttribPartIndex When the value of an Attribute Entry is shorter than 257 bytes, the whole value is contained in one instance of t11FcSpPoNaAttribValue, and the value of this object is 1. If the value of an Attribute Entr…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.9.1.3
t11FcSpPoNaAttribType The type of attribute. The first type to be defined is: t11FcSpPoNaAttribType t11FcSpPoNaAttribValue ===================== ====================== '00000001'h The AUTH_Nego…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.9.1.4
t11FcSpPoNaAttribValue The value of an Attribute Entry is divided up on 256-byte boundaries such that all parts are 256 bytes long except the last part, which is shorter if necessary, and each such part is contained in a separate instance of …	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.2.1.178.1.3.9.1.5
t11FcSpPoNaAttribExtension For some types of Attribute Policy Object, the value of this MIB object points to type-specific MIB objects that contain individual/broken-out parts of the Attribute Policy Object's value. If this object doesn't point …	ObjectIdentifier	.1.3.6.1.2.1.178.1.3.9.1.6
t11FcSpPoNaAttribRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.9.1.7

A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within non-active
Policy Objects.
          
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoNaAttribExtension contains the OID of this table.

t11FcSpPoNaAuthProtEntry row .1.3.6.1.2.1.178.1.3.10.1

Each row contains information about an Authentication
Protocol that is extracted out of the Attribute Entry
(identified by t11FcSpPoNaAttribEntryIndex) of the
non-active Policy Attribute Object (identified by
t11FcSpPoN…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex t11FcSpPoNaAttribName t11FcSpPoNaAttribEntryIndex t11FcSpPoNaAuthProtIdentifier t11FcSpPoNaAuthProtPartIndex

Column	Syntax	OID
t11FcSpPoNaAuthProtIdentifier The Authentication Protocol Identifier: 1 = DH-CHAP 3 = FCPAP 4 = IKEv2 5 = IKEv2-AUTH 240 thru 255 = Vendor Specific Protocols all other values are 'Reserved' (by T11).	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.178.1.3.10.1.1
t11FcSpPoNaAuthProtPartIndex When the value of an Attribute Protocol Parameters string is shorter than 257 bytes, the whole value is contained in one instance of t11FcSpPoNaAuthProtParams, and the value of this object is 1. (This includes the case …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.178.1.3.10.1.2
t11FcSpPoNaAuthProtParams The value of an Authentication Protocol Parameters string is divided up on 256-byte boundaries such that all parts are 256 bytes long except the last part, which is shorter if necessary, and each such part is contained …	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.2.1.178.1.3.10.1.3
t11FcSpPoNaAuthProtRowStatus The status of this row. Values of object instances within the row can be modified at any time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.178.1.3.10.1.4

A table of statistics maintained by FC-SP Security
Policy Servers.

t11FcSpPoStatsEntry row .1.3.6.1.2.1.178.1.4.1.1

A set of statistics for the FC-SP Security Policy Server on
the Fabric identified by the value of t11FcSpPoFabricIndex,
and managed within the Fibre Channel management instance
identified by fcmInstanceIndex.

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex

Column	Syntax	OID
t11FcSpPoInRequests The number of FC-SP Policy Management Requests (e.g., GPS, APS, etc.) received by this FC-SP Security Policy Server on this Fabric. This counter has no discontinuities other than those that all Counter32'…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.178.1.4.1.1.1
t11FcSpPoInAccepts The number of times that this FC-SP Security Policy Server sent an Accept CT_IU on this Fabric in response to a received FC-SP Policy Management Request (e.g., GPS, APS, etc.). This counter has no discont…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.178.1.4.1.1.2
t11FcSpPoInRejects The number of times that this FC-SP Security Policy Server sent a Reject CT_IU on this Fabric in response to a received FC-SP Policy Management Request (e.g., GPS, APS, etc.). This counter has no disconti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.178.1.4.1.1.3

A table of control information, including the memory
realization of FC-SP Policy Databases, and concerning
the generation of notifications due to FC-SP
Policy-related events.

t11FcSpPoControlEntry row .1.3.6.1.2.1.178.1.5.2.1

Each entry contains control information specific to FC-SP
Policy and Policy-related events for the Fabric identified
by the value of t11FcSpPoFabricIndex, and managed within
the Fibre Channel management instance identif…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpPoFabricIndex

Column	Syntax	OID
t11FcSpPoStorageType This object specifies the memory realization of FC-SP Policy Objects and related information for a particular Fabric; specifically, for: - rows created and/or modified for the particular Fabric in t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.178.1.5.2.1.1
t11FcSpPoNotificationEnable This object specifies whether the following types of notifications: t11FcSpPoNotifyActivation, t11FcSpPoNotifyActivateFail, t11FcSpPoNotifyDeactivation and t11FcSpPoNotifyDeactivateFail …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.178.1.5.2.1.2
t11FcSpPoLastNotifyType An indication of which of the following types of notification is currently being/was most recently generated for the Fabric: 'activation' -- t11FcSpPoNotifyActivation 'activateFail' -- t11FcSpPo…	Enumeration Enumerated Values: 1 none 2 activation 3 activateFail 4 deactivation 5 deactivateFail	.1.3.6.1.2.1.178.1.5.2.1.3
t11FcSpPoRequestSource The WWN of the source of the (Activate Policy Summary or Deactivate Policy Summary) request for which the current/most recent notification of the type indicated by the corresponding instance of t11FcSpPoLastNotifyType i…	FC-MGMT-MIBFcNameIdOrZero Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.2.1.178.1.5.2.1.4
t11FcSpPoReasonCode The reason code associated with the failure that is indicated when the value of the corresponding instance of t11FcSpPoLastNotifyType is 'activateFail' or 'deactivateFail'. For other values of t11FcSpPoLa…	T11-FC-NAME-SERVER-MIBT11NsGs4RejectReasonCode Type Values: 1 none 2 invalidCmdCode 3 invalidVerLevel 4 logicalError 5 invalidIUSize 6 logicalBusy 7 protocolError 8 unableToPerformCmdReq 9 cmdNotSupported 10 serverNotAvailable 11 couldNotEstabSession 12 vendorError	.1.3.6.1.2.1.178.1.5.2.1.5
t11FcSpPoCtCommandString The binary content of the failed request that is indicated when the value of the corresponding instance of t11FcSpPoLastNotifyType is 'activateFail' or 'deactivateFail'. The content of the request is formatted as an oc…	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.178.1.5.2.1.6
t11FcSpPoReasonCodeExp The reason code explanation associated with the failure that is indicated when the value of the corresponding instance of t11FcSpPoLastNotifyType is 'activateFail' or 'deactivateFail'. For other values of…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.2.1.178.1.5.2.1.7
t11FcSpPoReasonVendorCode The vendor-specific reason code associated with the failure that is indicated when the value of the corresponding instance of t11FcSpPoLastNotifyType is 'activateFail' or 'deactivateFail'. For other value…	OctetString Constraints: range: 0-1	.1.3.6.1.2.1.178.1.5.2.1.8