T11-FC-SP-AUTHENTICATION-MIB Table View

A table of Fibre Channel entities that can be authenticated
using FC-SP's Authentication Protocols.
          
The purpose of an FC-SP Authentication Protocol is to verify
that a claimed name is associated with the claiming entity.
The Authentication Protocols can be used to authenticate
Nx_Ports, B_Ports, or Switches.

t11FcSpAuEntityEntry row .1.3.6.1.2.1.176.1.1.1

Information about the configuration and capabilities of an
FC-SP entity (which is managed within the Fibre Channel
management instance identified by fcmInstanceIndex) on a
particular Fabric with respect to FC-SP's Authe…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpAuEntityName t11FcSpAuFabricIndex

Column	Syntax	OID
t11FcSpAuEntityName The name used to identify the FC-SP entity. For entities that are Fibre Channel Switches, this value corresponds to the Switch's value of fcmSwitchWWN. For entities other than Fibre Channel Switches, thi…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.176.1.1.1.1
t11FcSpAuFabricIndex An index value that uniquely identifies a particular Fabric to which the entity is attached.	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.176.1.1.1.2
t11FcSpAuServerProtocol The protocol, if any, used by the entity to communicate with a third party (i.e., an External Server) as part of the process by which it verifies DH-CHAP responses. For example, if the entity is using an external RADIU…	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.2.1.176.1.1.1.3
t11FcSpAuStorageType This object specifies the memory realization of configuration information related to an FC-SP Entity on a particular Fabric: specifically, for MIB objects in the row containing this object. Even if an ins…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.176.1.1.1.4
t11FcSpAuSendRejNotifyEnable An indication of whether or not the entity should issue t11FcSpAuRejectSentNotify notifications when sending AUTH_Reject/SW_RJT/LS_RJT to reject an AUTH message. If the value of the object is 'true', then…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.176.1.1.1.5
t11FcSpAuRcvRejNotifyEnable An indication of whether or not the entity should issue t11FcSpAuRejectReceivedNotify notifications on the receipt of AUTH_Reject/SW_RJT/LS_RJT messages. If the value of the object is 'true', then this ty…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.176.1.1.1.6
t11FcSpAuDefaultLifetime When the value of this object is non-zero, it specifies the default value of a lifetime, specified in units given by the corresponding instance of t11FcSpAuDefaultLifetimeUnits. This default lifetime is to be used for a…	T11-FC-SP-TC-MIBT11FcSpLifetimeLeftr/w	.1.3.6.1.2.1.176.1.1.1.7
t11FcSpAuDefaultLifetimeUnits The units in which the value of the corresponding instance of t11FcSpAuDefaultLifetime specifies a default lifetime for a Security Association that has no explicitly-specified value for its lifetime.	T11-FC-SP-TC-MIBT11FcSpLifetimeLeftUnitsr/w Type Values: 1 seconds 2 kiloBytes 3 megaBytes 4 gigaBytes 5 teraBytes 6 petaBytes 7 exaBytes 8 zettaBytes 9 yottaBytes	.1.3.6.1.2.1.176.1.1.1.8
t11FcSpAuRejectMaxRows The maximum number of rows in the t11FcSpAuRejectTable for this entity on this Fabric. If and when an AUTH message is rejected, and the t11FcSpAuRejectTable already contains this maximum number of rows for the specific…	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.2.1.176.1.1.1.9
t11FcSpAuDhChapHashFunctions The hash functions that the entity supports when using the DH-CHAP algorithm.	T11-FC-SP-TC-MIBT11FcSpHashFunctions Type Values: 0 md5 1 sha1	.1.3.6.1.2.1.176.1.1.1.10
t11FcSpAuDhChapDhGroups The DH Groups that the entity supports when using the DH-CHAP algorithm in FC-SP.	T11-FC-SP-TC-MIBT11FcSpDhGroups Type Values: 0 null 1 group1024 2 group1280 3 group1536 4 group2048 5 group3072 6 group4096 7 group6144 8 group8192	.1.3.6.1.2.1.176.1.1.1.11
t11FcSpAuFcapHashFunctions The hash functions that the entity supports when specified as Protocol Parameters in the AUTH_Negotiate message for FCAP in FC-SP.	T11-FC-SP-TC-MIBT11FcSpHashFunctions Type Values: 0 md5 1 sha1	.1.3.6.1.2.1.176.1.1.1.12
t11FcSpAuFcapCertsSignFunctions The signature functions used within certificates that the entity supports when using FCAP in FC-SP.	T11-FC-SP-TC-MIBT11FcSpSignFunctions Type Values: 0 rsaSha1	.1.3.6.1.2.1.176.1.1.1.13
t11FcSpAuFcapDhGroups The DH Groups that the entity supports when using the FCAP algorithm in FC-SP.	T11-FC-SP-TC-MIBT11FcSpDhGroups Type Values: 0 null 1 group1024 2 group1280 3 group1536 4 group2048 5 group3072 6 group4096 7 group6144 8 group8192	.1.3.6.1.2.1.176.1.1.1.14
t11FcSpAuFcpapHashFunctions The hash functions that the entity supports when using the FCPAP algorithm in FC-SP.	T11-FC-SP-TC-MIBT11FcSpHashFunctions Type Values: 0 md5 1 sha1	.1.3.6.1.2.1.176.1.1.1.15
t11FcSpAuFcpapDhGroups The DH Groups that the entity supports when using the FCPAP algorithm in FC-SP.	T11-FC-SP-TC-MIBT11FcSpDhGroups Type Values: 0 null 1 group1024 2 group1280 3 group1536 4 group2048 5 group3072 6 group4096 7 group6144 8 group8192	.1.3.6.1.2.1.176.1.1.1.16

Each FC-SP Authentication entity can operate on one or more
interfaces, but at most one of them can operate on each
interface.  A row in this table exists for each interface
to each Fabric on which each Authentication entity operates.
          
The objects within this table contain statistics information
related to FC-SP's Authentication Protocols.

t11FcSpAuIfStatEntry row .1.3.6.1.2.1.176.1.2.1

A set of Authentication Protocols statistics for an FC-SP
Authentication entity (identified by t11FcSpAuEntityName) on
one of its interfaces to a particular Fabric, which is
managed within the Fibre Channel management i…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpAuEntityName t11FcSpAuIfStatInterfaceIndex t11FcSpAuIfStatFabricIndex

Column	Syntax	OID
t11FcSpAuIfStatInterfaceIndex The interface on which the FC-SP Authentication entity operates and for which the statistics are collected.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.176.1.2.1.1
t11FcSpAuIfStatFabricIndex An index value identifying the particular Fabric for which the statistics are collected.	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.176.1.2.1.2
t11FcSpAuIfStatTimeouts The number of FC-SP Authentication Protocol messages sent by the particular entity on the particular Fabric on the particular interface, for which no response was received within a timeout period. This co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.3
t11FcSpAuIfStatInAcceptedMsgs The number of FC-SP Authentication Protocol messages received and accepted by the particular entity on the particular Fabric on the particular interface. This counter has no discontinuities other than tho…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.4
t11FcSpAuIfStatInLsSwRejectedMsgs The number of FC-SP Authentication Protocol messages received by the particular entity on the particular Fabric on the particular interface, and rejected by a lower-level (SW_RJT or LS_RJT) reject. This c…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.5
t11FcSpAuIfStatInAuthRejectedMsgs The number of FC-SP Authentication Protocol messages received by the particular entity on the particular Fabric on the particular interface, and rejected by an AUTH_Reject message. This counter has no dis…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.6
t11FcSpAuIfStatOutAcceptedMsgs The number of FC-SP Authentication Protocol messages sent by the particular entity on the particular Fabric on the particular interface, which were accepted by the neighboring entity, i.e., not rejected by an AUTH_Rejec…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.7
t11FcSpAuIfStatOutLsSwRejectedMsgs The number of FC-SP Authentication Protocol messages sent by the particular entity on the particular Fabric on the particular interface, which were rejected by a lower-level (SW_RJT or LS_RJT) reject. Thi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.8
t11FcSpAuIfStatOutAuthRejectedMsgs The number of FC-SP Authentication Protocol messages sent by the particular entity on the particular Fabric on the particular interface, which were rejected by an AUTH_Reject message. This counter has no …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.176.1.2.1.9

A table of volatile information about FC-SP Authentication
Protocol transactions that were recently rejected with
an AUTH_Reject message, or with an SW_RJT/LS_RJT.
          
The maximum number of rows in this table for a specific
entity on a specific Fabric is given by the value of the
corresponding instance of t11FcSpAuRejectMaxRows.
          
The syntax of t11FcSpAuRejTimestamp is TimeStamp, and thus
its value rolls over to zero after approximately 497 days.
To avoid any confusion due to such a rollover, rows should
be deleted from this table before they are 497 days old.
          
This table will be empty if no AUTH_Reject messages,
nor any SW_RJT/LS_RJT's rejecting an AUTH message,
have been sent or received since the last
re-initialization of the agent.

t11FcSpAuRejectEntry row .1.3.6.1.2.1.176.1.3.1

Information about one AUTH message (either an
AUTH_ELS or an AUTH_ILS) that was rejected with an
AUTH_Reject, SW_RJT or LS_RJT message, sent/received by
the entity identified by values of fcmInstanceIndex and
t11FcSpAuE…

Indexes

FC-MGMT-MIBfcmInstanceIndex t11FcSpAuEntityName t11FcSpAuRejInterfaceIndex t11FcSpAuRejFabricIndex t11FcSpAuRejTimestamp

Column	Syntax	OID
t11FcSpAuRejInterfaceIndex The interface on which the rejected AUTH message was sent or received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.176.1.3.1.1
t11FcSpAuRejFabricIndex An index value identifying the particular Fabric on which the rejected AUTH message was sent or received.	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.176.1.3.1.2
t11FcSpAuRejTimestamp The time at which the AUTH message was rejected. If two rows have the same value of this object for the same entity on the same interface and Fabric, the value of this object for the later one is incremented by one.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.176.1.3.1.3
t11FcSpAuRejDirection An indication of whether the rejection was sent or received by the identified entity. The value 'sent(1)' corresponds to a notification of type t11FcSpAuRejectSentNotify; the value 'received(2)' correspon…	Enumeration Enumerated Values: 1 sent 2 received	.1.3.6.1.2.1.176.1.3.1.4
t11FcSpAuRejType An indication of whether the rejection was an AUTH_Reject, an SW_RJT or an LS_RJT.	Enumeration Enumerated Values: 1 authReject 2 swRjt 3 lsRjt	.1.3.6.1.2.1.176.1.3.1.5
t11FcSpAuRejAuthMsgString The binary content of the AUTH message that was rejected, formatted as an octet string (in network byte order) containing the content of the message. If the binary content is unavailable, then the length …	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.176.1.3.1.6
t11FcSpAuRejReasonCode The reason code with which this AUTH message was rejected.	T11-FC-SP-TC-MIBT11FcSpAuthRejectReasonCode Type Values: 1 authFailure 2 logicalError 3 logicalBusy 4 authILSNotSupported 5 authELSNotSupported 6 notLoggedIn	.1.3.6.1.2.1.176.1.3.1.7
t11FcSpAuRejReasonCodeExp The reason code explanation with which this AUTH message was rejected.	T11-FC-SP-TC-MIBT11FcSpAuthRejReasonCodeExp Type Values: 1 authMechanismNotUsable 2 dhGroupNotUsable 3 hashFunctionNotUsable 4 authTransactionAlreadyStarted 5 authenticationFailed 6 incorrectPayload 7 incorrectAuthProtocolMessage 8 restartAuthProtocol 9 authConcatNotSupported 10 unsupportedProtocolVersion 11 logicalBusy 12 authILSNotSupported 13 authELSNotSupported 14 notLoggedIn	.1.3.6.1.2.1.176.1.3.1.8