T11-FC-FSPF-MIB Table View

This table allows the users to configure and monitor FSPF's
per-Fabric parameters and statistics on all Fabrics known to
locally managed switches.
          
Entries are created/removed by the agent if and when
(Virtual) Fabrics are created/deleted.

t11FspfEntry row .1.3.6.1.2.1.143.1.1.1.1

An entry containing FSPF variables, parameters, and
statistics on a particular switch (identified by values
of fcmInstanceIndex and fcmSwitchIndex) for a particular
Fabric (identified by a t11FspfFabricIndex value).
…

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex t11FspfFabricIndex

Column	Syntax	OID
t11FspfFabricIndex A unique index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures. In such a case, in…	T11-TC-MIBT11FabricIndex Type Constraints: range: 0..4095	.1.3.6.1.2.1.143.1.1.1.1.1
t11FspfMinLsArrival The minimum time after accepting a Link State Record (LSR) on this Fabric before accepting another update of the same LSR on the same Fabric. An LSR update that is not accepted because of this time interv…	milliSecondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.143.1.1.1.1.2
t11FspfMinLsInterval The minimum time after this switch sends an LSR on this Fabric before it will send another update of the same LSR on the same Fabric.	milliSecondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.143.1.1.1.1.3
t11FspfLsRefreshTime The interval between transmission of refresh LSRs on this Fabric.	MinutesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.4
t11FspfMaxAge The maximum age an LSR will be retained in the FSPF database on this Fabric. An LSR is removed from the database after MaxAge is reached.	MinutesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.5
t11FspfMaxAgeDiscards The number of LSRs discarded due to their age reaching t11FspfMaxAge in this Fabric. The last discontinuity of this counter is indicated by t11FspfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.6
t11FspfPathComputations The number of times that the path computation algorithm has been invoked by this Switch on this Fabric to compute a set of minimum cost paths for this Fabric. The last discontinuity of this counter is in…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.7
t11FspfChecksumErrors The number of FSPF checksum errors that were detected locally (and therefore discarded) on this Fabric. The last discontinuity of this counter is indicated by t11FspfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.8
t11FspfLsrs The current number of entries for this Fabric in the t11FspfLsrTable.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.1.1.9
t11FspfCreateTime The value of sysUpTime when this entry was last created.	T11FspfLastCreationTime	.1.3.6.1.2.1.143.1.1.1.1.10
t11FspfAdminStatus The desired state of FSPF in this Fabric. If value of this object is set to 'up', then FSPF is enabled in this Fabric. If set to 'down', then FSPF is disabled in this Fabric -- when FSPF is disabled, FSPF provides …	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.143.1.1.1.1.11
t11FspfOperStatus State of FSPF in this Fabric. If 't11FspfAdminStatus' is 'down', then the 't11FspfOperStatus' should be 'down'. If 't11FspfAdminStatus' is changed to 'up', then 't11FspfOperStatus' should change to 'up' as and when FSP…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.143.1.1.1.1.12
t11FspfNbrStateChangNotifyEnable Specifies whether or not the local agent should issue the notification 't11FspfNbrStateChangNotify' when the local switch learns of a change of state in the FSPF Neighbor Finite State Machine on an interface in this Fab…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.143.1.1.1.1.13
t11FspfSetToDefault Setting this value to 'default' changes the value of each and every writable object in this row to its default value. No action is taken if this object is set to 'noOp'. The value of the ob…	Enumerationr/w Enumerated Values: 1 default 2 noOp	.1.3.6.1.2.1.143.1.1.1.1.14
t11FspfStorageType The storage type for read-write objects in this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.143.1.1.1.1.15

This table allows the users to configure and monitor
the FSPF parameters that are per-interface (identified
by a t11FspfIfIndex value), per-Fabric (identified by a
t11FspfFabricIndex value), and per-switch (identified by
values of fcmInstanceIndex and fcmSwitchIndex).
          
Creating a row in this table via t11FspfIfRowStatus
provides the means to specify non-default parameter value(s)
for an interface at a time when the relevant row in this
table would not otherwise exist because the interface is
either down or it is not an E_Port, but the corresponding
row in the t11FspfTable must already exist.
          
After the non-default values have been specified for a
port's parameters, they need to be retained in this table,
even when the port becomes 'isolated'.  However, having
unnecessary rows in this table clutters it up and makes
those rows that are useful harder for an NMS to find.
Therefore, when an E_Port becomes isolated, its row gets
deleted if and only if all of its parameter values are the
default values; also, when an E_Port becomes non-isolated
          
in a particular Fabric, a row in this table needs to exist
and is automatically created, if necessary.
          
The specific conditions for an automated/implicit deletion
of a row are:
a) if the corresponding interface is no longer an E_Port
   (e.g., a G_Port which is dynamically determined to be an
   F_Port), and all configurable parameters have default
   values; or
b) if the interface identified by t11FspfIfIndex no longer
   exists (e.g., because a line-card is physically removed);
   or
c) if the corresponding row in the t11FspfTable is deleted.

t11FspfIfEntry row .1.3.6.1.2.1.143.1.1.2.1

An entry containing FSPF information for the interface
identified by t11FspfIfIndex, on the fabric identified
by t11FspfFabricIndex, on the switch identified by
fcmSwitchIndex.

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex t11FspfFabricIndex t11FspfIfIndex

Column	Syntax	OID
t11FspfIfIndex The value of ifIndex that identifies the local Fibre Channel interface for which this entry contains FSPF information.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.143.1.1.2.1.1
t11FspfIfHelloInterval Interval between the periodic HELLO messages sent on this interface in this Fabric to verify the link health. Note that this value must be same at both ends of a link in this Fabric.	SecondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.143.1.1.2.1.2
t11FspfIfDeadInterval Maximum time for which no HELLO messages can be received on this interface in this Fabric. After this time, the interface is assumed to be broken and removed from the database. Note that this value must be greater tha…	SecondsUnsigned32r/w Constraints: range: 2-65535	.1.3.6.1.2.1.143.1.1.2.1.3
t11FspfIfRetransmitInterval The time after which an unacknowledged LSR is retransmitted on this interface in this Fabric.	SecondsUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.143.1.1.2.1.4
t11FspfIfInLsuPkts Number of Link State Update (LSU) packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.5
t11FspfIfInLsaPkts Number of Link State Acknowledgement (LSA) packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.6
t11FspfIfOutLsuPkts Number of Link State Update (LSU) packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.7
t11FspfIfOutLsaPkts Number of Link State Acknowledgement (LSA) packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.8
t11FspfIfOutHelloPkts Number of HELLO packets transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.9
t11FspfIfInHelloPkts Number of HELLO packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.10
t11FspfIfRetransmittedLsuPkts The number of LSU packets that contained one or more retransmitted LSRs, and that were transmitted on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.11
t11FspfIfInErrorPkts Number of invalid FSPF control packets received on this interface in this Fabric. The last discontinuity of this counter is indicated by t11FspfIfCreateTime.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.143.1.1.2.1.12
t11FspfIfNbrState The state of FSPF's 'neighbor state machine', which is the operational state of the interaction with the neighbor's interface that is connected to this interface. If the 't11FspfIfAdminStat…	T11FspfInterfaceState Type Values: 1 down 2 init 3 dbExchange 4 dbAckwait 5 dbWait 6 full	.1.3.6.1.2.1.143.1.1.2.1.13
t11FspfIfNbrDomainId The Domain Id of the neighbor in this Fabric.	FC-MGMT-MIBFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.2.1.143.1.1.2.1.14
t11FspfIfNbrPortIndex The index, as known by the neighbor, of the neighbor's interface that is connected to this interface in this Fabric.	Unsigned32 Constraints: range: 0-16777215	.1.3.6.1.2.1.143.1.1.2.1.15
t11FspfIfAdminStatus The desired state of FSPF on this interface in this Fabric, whenever 't11FspfAdminStatus' is 'up'. If the value of this object is set to 'up', then FSPF is enabled on this interface in this Fabric. If set to 'down', th…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.2.1.143.1.1.2.1.16
t11FspfIfCreateTime The value of sysUpTime when this entry was last created.	T11FspfLastCreationTime	.1.3.6.1.2.1.143.1.1.2.1.17
t11FspfIfSetToDefault Setting this value to 'default' changes the value of each and every writable object in this row to its default value. If all the configuration parameters have their default values, and if the interface is…	Enumerationr/w Enumerated Values: 1 default 2 noOp	.1.3.6.1.2.1.143.1.1.2.1.18
t11FspfIfLinkCostFactor The administrative factor used in calculating the cost of sending a frame on this interface in this Fabric. The formula used to calculate the link cost is: Link Cost = S * (1.0625e…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.143.1.1.2.1.19
t11FspfIfStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.143.1.1.2.1.20
t11FspfIfRowStatus The status of the conceptual row. This object can be used to create an entry only if there is an entry in the t11FspfTable for the corresponding Fabric, and if the interface is either isolated or is a non…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.143.1.1.2.1.21

This table is the database of all the latest
incarnations of the Link State Records (LSRs) that
are currently contained in the topology database,
for all interfaces on all Fabrics known to
locally managed switches.
          
A Fabric's topology database contains the LSRs that
have been either issued or received by a local switch on
that Fabric, and that have not reached t11FspfMaxAge.

t11FspfLsrEntry row .1.3.6.1.2.1.143.1.2.1.1

This gives information for the most recent update of an
LSR. There is one entry for every LSR issued or received
by a locally managed switch (identified by
fcmInstanceIndex and fcmSwitchIndex) in a Fabric
(identified b…

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex t11FspfFabricIndex t11FspfLsrDomainId t11FspfLsrType

Column	Syntax	OID
t11FspfLsrDomainId Domain Id of the LSR owner in this Fabric. It is the Link State Id of this LSR.	FC-MGMT-MIBFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.2.1.143.1.2.1.1.1
t11FspfLsrType Type of this LSR.	T11FspfLsrType Type Constraints: range: 0..255	.1.3.6.1.2.1.143.1.2.1.1.2
t11FspfLsrAdvDomainId Domain Id of the switch that is advertising the LSR on the behalf of the switch owning it.	FC-MGMT-MIBFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.2.1.143.1.2.1.1.3
t11FspfLsrAge The time since this LSR was inserted into the database.	SecondsUnsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.143.1.2.1.1.4
t11FspfLsrIncarnationNumber The link state incarnation number of this LSR. This is used to identify most recent instance of an LSR while updating the topology database when an LSR is received. The updating of an LSR includes incrementing its inca…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.143.1.2.1.1.5
t11FspfLsrCheckSum The checksum of the LSR.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.143.1.2.1.1.6
t11FspfLsrLinks Number of entries in the t11FspfLinkTable associated with this LSR.	Unsigned32 Constraints: range: 0-65355	.1.3.6.1.2.1.143.1.2.1.1.7

This table contains the list of Inter-Switch Links and
their information that is part of an LSR, either
received or transmitted.

t11FspfLinkEntry row .1.3.6.1.2.1.143.1.2.4.1

An entry that contains information about a link
contained in an LSR in this Fabric. An entry is created
whenever a new link appears in an (issued or received)
LSR. An entry is deleted when a link no longer appears
in …

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex t11FspfFabricIndex t11FspfLsrDomainId t11FspfLsrType t11FspfLinkIndex

Column	Syntax	OID
t11FspfLinkIndex An arbitrary index of this link.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.143.1.2.4.1.1
t11FspfLinkNbrDomainId The Domain Id of the neighbor on the other end of this link in this Fabric.	FC-MGMT-MIBFcDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.2.1.143.1.2.4.1.2
t11FspfLinkPortIndex The source E_port of this link, as indicated by the index value in the LSR received from the switch identified by 't11FspfLsrDomainId'.	Unsigned32 Constraints: range: 0-16777215	.1.3.6.1.2.1.143.1.2.4.1.3
t11FspfLinkNbrPortIndex The destination E_port of this link, as indicated by the index value in the LSR received from the switch identified by 't11FspfLinkNbrDomainId'.	Unsigned32 Constraints: range: 0-16777215	.1.3.6.1.2.1.143.1.2.4.1.4
t11FspfLinkType The type of this link.	T11FspfLinkType Type Constraints: range: 0..255	.1.3.6.1.2.1.143.1.2.4.1.5
t11FspfLinkCost The cost of sending a frame on this link in this Fabric. Link cost is calculated using the formula: link cost = S * (1.0625e12 / Signalling Rate) For issued LSRs, S is determined by t…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.143.1.2.4.1.6