StorageManagement-MIB Table View

A table of managed RAID controllers. The number of entries
is related to number of RAID controllers discovered in the
system.
Note: The properties in this table may not be applicable to all entries.

controllerEntry row .1.3.6.1.4.1.674.10893.1.20.130.1.1

An entry in the table of RAID controllers. A row in this table cannot
be created or deleted by SNMP operations on columns of the table.

Indexes

controllerNumber

Column	Syntax	OID
controllerNumbermandatory Instance number of this controller entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.1.1.1
controllerNamemandatory The name of the controller in this subsystem as represented in Storage Management. Includes the controller type and instance. For example: Perc3/QC 1.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.2
controllerVendormandatory The controller's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.3
controllerTypemandatory The type of this controller: 1: SCSI 2: PV660F 3: PV662F 4: IDE (Integrated/Intelligent Drive Electronics) 5: SATA (Serial Advanced Technology Attachment) 6: SAS (Serial Attached SCSI) 9: PCIe SSD	Enumeration Enumerated Values: 1 scsi 2 pv660F 3 pv662F 4 ide 5 sata 6 sas 9 pciessd	.1.3.6.1.4.1.674.10893.1.20.130.1.1.4
controllerStatemandatory The current condition of the controller's subsystem (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded	Enumeration Enumerated Values: 1 ready 2 failed 3 online 4 offline 6 degraded	.1.3.6.1.4.1.674.10893.1.20.130.1.1.5
controllerSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.1.1.6
controllerRebuildRateInPercentmandatory The percent of the compute cycles dedicated to rebuilding failed array disks.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.674.10893.1.20.130.1.1.7
controllerFWVersionmandatory The controller's current firmware version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.8
controllerCacheSizeInMBmandatory The controller's current amount of cache memory in megabytes. If this size is 0, it is less than a megabyte.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.9
controllerCacheSizeInBytesmandatory The controller's current amount of cache memory that is less than a megabyte. This combined with the controllerCacheSizeInMB will be the total amount of memory.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.10
controllerPhysicalDeviceCountmandatory Number of physical devices on the controller channel including both disks and the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.11
controllerLogicalDeviceCountmandatory Number of virtual disks on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.12
controllerPartnerStatusobsolete This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.13
controllerHostPortCountobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.14
controllerMemorySizeInMBmandatory Size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.15
controllerMemorySizeInBytesmandatory Size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB will be the total size of the memory. This attribute is only supported on Adaptec controllers.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.16
controllerDriveChannelCountobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.674.10893.1.20.130.1.1.17
controllerFaultTolerantmandatory This entry is obsolete. Fibre channel is not supported in Storage Management.	Enumeration Enumerated Values: 1 yes	.1.3.6.1.4.1.674.10893.1.20.130.1.1.18
controllerC0Port0WWNobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.19
controllerC0Port0Nameobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.20
controllerC0Port0IDobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.21
controllerC0Targetobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.22
controllerC0Channelobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.23
controllerC0OSControllerobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.24
controllerC0BatteryStateobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Enumeration Enumerated Values: 1 ok 2 failed 7 reconditioning 9 high 10 low 12 charging 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.1.1.25
controllerC1Port0WWNobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.26
controllerC1Port0Nameobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.27
controllerC1Port0IDobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.28
controllerC1Targetobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.29
controllerC1Channelobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.30
controllerC1OSControllerobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.31
controllerC1BatteryStateobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Enumeration Enumerated Values: 1 ok 2 failed 7 reconditioning 9 high 10 low 12 charging 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.1.1.32
controllerNodeWWNobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.33
controllerC0Port1WWNobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.34
controllerC1Port1WWNobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.35
controllerBatteryChargeCountobsolete This entry is obsolete. Fibre channel is not supported in Storage Management.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.36
controllerRollUpStatusmandatory Severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.1.1.37
controllerComponentStatusmandatory The status of the controller itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.1.1.38
controllerNexusIDmandatory Durable unique ID for this controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.39
controllerAlarmStatemandatory State, or setting for the controller's alarm. Possible values: 1: Enabled 2: Disabled 3: Not Applicable	Enumeration Enumerated Values: 1 enabled 2 disabled 3 not-applicable	.1.3.6.1.4.1.674.10893.1.20.130.1.1.40
controllerDriverVersionmandatory Currently installed driver version for this controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.41
controllerPCISlotmandatory The PCI slot number or embedded number for controllers on the motherboard. For Modular or NGM controllers, the PCI Slot Designation or Embedded is displayed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.42
controllerClusterModemandatory Identifies if the controller is in cluster mode. Possible values: 1 : Enabled 2 : Disabled 3 : Active (enabled and active) 99: Not Applicable	Enumeration Enumerated Values: 1 enabled 2 disabled 3 active 99 notApplicable	.1.3.6.1.4.1.674.10893.1.20.130.1.1.43
controllerMinFWVersionmandatory The minimum firmware version for Storage Management to support the controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.44
controllerMinDriverVersionmandatory The minimum driver version for Storage Management to support the controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.45
controllerSCSIInitiatorIDmandatory The SCSI ID of the initiator.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.46
controllerChannelCountmandatory Number of channels on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.47
controllerReconstructRatemandatory The rate for reconstruct on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.48
controllerPatrolReadRatemandatory The rate for patrol read on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.49
controllerBGIRatemandatory The rate for background initialization on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.50
controllerCheckConsistencyRatemandatory The rate for check consistency on the controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.51
controllerPatrolReadModemandatory Identifies the patrol read mode. Possible values: 1: Automatic (enabled) 2: Manual (enabled) 3: Disabled	Enumeration Enumerated Values: 1 automatic 2 manual 3 disabled	.1.3.6.1.4.1.674.10893.1.20.130.1.1.52
controllerPatrolReadStatemandatory The state of the patrol read. 1: Stopped - not running 2: Ready - ready to start 4: Active - is running 8: Aborted - has aborted	Enumeration Enumerated Values: 1 stopped 2 ready 4 active 8 aborted	.1.3.6.1.4.1.674.10893.1.20.130.1.1.53
controllerPatrolReadIterationsmandatory The number of times Patrol Read has been run on this controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.54
controllerStorportDriverVersionmandatory Provide current Windows OS storport driver version. Not applicable for Linux.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.55
controllerMinRequiredStorportVermandatory Provides minimum required storport driver version for Windows OS only.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.56
controllerEncryptionCapablemandatory Indicates Encryption capability of the controller. Value: 1 - Capable, 99 - NotApplicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.57
controllerEncryptionKeyPresentmandatory Indicates presence of Encryption Key for the controller. Value: 1 - Yes, 0 - No, 99 - NotApplicable	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.58
controllerPersistentHotSparemandatory Indicates Persistent Hot Spare capability of the controller Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.674.10893.1.20.130.1.1.59
controllerSpinDownUnconfiguredDrivesmandatory Indicates controller capability to put unconfigured drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.674.10893.1.20.130.1.1.60
controllerSpinDownHotSpareDrivesmandatory Indicates controller capability to put hot spare drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.674.10893.1.20.130.1.1.61
controllerSpinDownTimeIntervalmandatory Shows the duration in minutes after which, the unconfigured or hot spare drives will be spun down to power save mode. Value: 30 to 1440 Note: A value of 9999 indicates feature not available.	Integer32r/w Constraints: range: 30-1440	.1.3.6.1.4.1.674.10893.1.20.130.1.1.62
controllerEncryptionModemandatory Indicates the current encryption mode of the controller. Value: 0 - No Encryption, 1 - Local Key Management (LKM), 2 - Secure Enterprise Key Management (SEKM), 99 - Not Applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.63
controllerCacheCademandatory Indicates if the controller is CacheCade capable or not. Value: 1 - Capable, 0 - Not Capable, 99 - Undetermined	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.64
controllerSpinDownConfiguredDrivesmandatory Indicates controller capability to spin down configured physical disks. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.65
controllerAutomaticPowerSavingmandatory Indicates controller capability for automatic power saving. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.66
controllerConfiguredDrivesSpinUpTimemandatory Indicates configured drives spin up start time. Value: 1:00 AM to 12:59 PM, 9999 - Undetermined	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.67
controllerConfiguredDrivesSpinUpTimeIntervalmandatory Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up. Value: 1 .. 24, 9999 - Undetermin…	Integer32 Constraints: range: 30-1440	.1.3.6.1.4.1.674.10893.1.20.130.1.1.68
controllerPreservedCachemandatory Indicates if preserved cache is present on the controller. Values: 1- Yes, 0 - No, 99 - Not available / Not applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.69
controllerPIEnablemandatory Indicates if T10 PI is enabled on a controller. Value can be either 0 (T10 PI disabled) or 1 (T10 PI enabled).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.70
controllerCurrentModemandatory Shows the current controller mode.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.71
frontChassisSlotmandatory Shows the physical slot on the chassis for stash .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.72
controllerInstancemandatory Shows the current instance of the controller for stash .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.1.1.73
controllerNonRAIDdiskCachePolicymandatory Displays the current disk write cache policy for Non-RAID disks.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.74
controllerAutoconfigureBehaviormandatory Displays the current auto configure behavior mode on controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.1.1.75

A table of controller channels. The number of entries is 
related to the number of channels supported by a RAID 
controller. Perc2 RAID controller supports a max of 4 
channels per controller. The maximum number of entries is 
implementation dependent.
Note: The properties in this table may not be applicable to all entries.

channelEntry row .1.3.6.1.4.1.674.10893.1.20.130.2.1

An entry in the channel table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

channelNumber

Column	Syntax	OID
channelNumbermandatory Instance number of this channel entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.2.1.1
channelNamemandatory The name of the channel as represented in Storage Management. The name will include the word channel and the instance. For example: Channel 1	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.2.1.2
channelStatemandatory The current condition of the channel. Possible states: 0: Unknown 1: Ready - The I/O has resumed. 2: Failed 3: Online 4: Offline - The I/O has paused. 6: Degraded	Enumeration Enumerated Values: 1 ready 2 failed 3 online 4 offline 6 degraded	.1.3.6.1.4.1.674.10893.1.20.130.2.1.3
channelSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.2.1.4
channelTerminationmandatory The type of SCSI termination on this channel. Termination is required for proper operation of this channel. 1: Wide Termination (16 bit) 2: Narrow Termination (8 bit) 3: Not Terminated	Enumeration Enumerated Values: 1 wide 2 narrow 3 notTerminated	.1.3.6.1.4.1.674.10893.1.20.130.2.1.5
channelSCSIIDmandatory The SCSI ID of the controller to which the channel belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.2.1.6
channelRollUpStatusmandatory Severity of the channel state. This is the combined status of the channel and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.2.1.7
channelComponentStatusmandatory The status of the channel itself with out without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.2.1.8
channelNexusIDmandatory Durable unique ID for this channel.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.2.1.9
channelDataRatemandatory The data rate (SCSI speed) of the channel. Example: Ultra 320M SCSI	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.2.1.10
channelBusTypemandatory The bus type of the channel. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe	Enumeration Enumerated Values: 1 scsi 2 ide 3 fibreChannel 4 ssa 6 usb 7 sata 8 sas 9 pcie	.1.3.6.1.4.1.674.10893.1.20.130.2.1.11

A table of managed Enclosures. The number of entries is 
related to number of enclosures discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

enclosureEntry row .1.3.6.1.4.1.674.10893.1.20.130.3.1

An entry in the Enclosure table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

enclosureNumber

Column	Syntax	OID
enclosureNumbermandatory Instance number of the enclosure entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.3.1.1
enclosureNamemandatory The enclosure's name as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.2
enclosureVendormandatory The enclosure's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.3
enclosureStatemandatory The current condition of the enclosure (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded	Enumeration Enumerated Values: 1 ready 2 failed 3 online 4 offline 6 degraded	.1.3.6.1.4.1.674.10893.1.20.130.3.1.4
enclosureSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.3.1.5
enclosureIDmandatory Represents unique id for an enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.6
enclosureProcessorVersionobsolete This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.7
enclosureServiceTagmandatory Enclosure identification used when consulting customer support.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.8
enclosureAssetTagmandatory User definable asset tag for the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.9
enclosureAssetNamemandatory User definable asset name of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.10
enclosureSplitBusPartNumbermandatory The enclosure's split bus part number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.11
enclosureProductIDmandatory The enclosure's product identification. This also corresponds to the enclosure type.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.12
enclosureKernelVersionobsolete This entry is obsolete for Storage Management. Refer to enclosureFirmwareVersion for the firmware version of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.13
enclosureESM1PartNumberobsolete This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.14
enclosureESM2PartNumberobsolete This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.15
enclosureTypemandatory The type of this enclosure. Possible values: 1: Internal 2: Dell PV200S (PV201S) 3: Dell PV210S (PV211S) 4: Dell PV220S (PV221S) 5: Dell PV660F 6: Dell PV224F 7: Dell PV660F / PV224F 8: Dell MD1000 9: Dell MD1120 11: De…	Enumeration Enumerated Values: 1 internal 2 dELLPV200SPV201S 3 dELLPV210SPV211S 4 dELLPV220SPV221S 5 dELLPV660F 6 dELLPV224F 7 dELLPV660F224F 8 md1000 9 md1120 10 md1200 11 md1220 12 md1400 13 md1420 14 mx5016s	.1.3.6.1.4.1.674.10893.1.20.130.3.1.16
enclosureProcessor2Versionmandatory This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.17
enclosureConfigmandatory The current configuration of the enclosure's backplane. Possible values: 1: Joined 2: Split Bus 3: Clustered 4: Unified	Enumeration Enumerated Values: 1 joined 2 splitBus 3 clustered 4 unified	.1.3.6.1.4.1.674.10893.1.20.130.3.1.18
enclosureChannelNumbermandatory The channel number, or bus, to which the enclosure is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.3.1.19
enclosureAlarmmandatory The current status of the enclosure's alarm (PV220S, and PV221S only.) Possible values: 1: Disabled 2: Enabled	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.674.10893.1.20.130.3.1.20
enclosureBackplanePartNumbermandatory The part number of the enclosure's backplane.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.21
enclosureSCSIIDmandatory The SCSI ID of the controller to which this enclosure is attached.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.3.1.22
enclosureRollUpStatusmandatory Severity of the enclosure state. This is the combined status of the enclosure and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.3.1.23
enclosureComponentStatusmandatory The status of the enclosure itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.3.1.24
enclosureNexusIDmandatory Durable unique ID for this enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.25
enclosureFirmwareVersionmandatory The firmware version of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.26
enclosureSCSIRatemandatory Actual SCSI rate in the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.27
enclosurePartNumbermandatory The part number of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.28
enclosureSerialNumbermandatory Serial number of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.29
enclosureSASAddressmandatory The specified SAS address if this is a SAS enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.30
enclosureOccupiedSlotCountmandatory Shows the number of physical disk slots occupied in a storage enclosure. Note: A value of 9999 indicates feature not available.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.3.1.31
enclosureTotalSlotsmandatory Shows the total number of physical slots in a storage enclosure; it includes total count of occupied and empty slots. Note: A value of 9999 indicates feature not available.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.3.1.32
enclosureEmptySlotCountmandatory Shows the number of empty physical disk slots in a storage enclosure. Note: A value of 9999 indicates feature not available.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.3.1.33
enclosureExpressServiceCodemandatory Express Service Code (ESC) is base10 converted numerical value of service tag.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.3.1.34

A table of managed Array Disks. The number of entries is 
related to number of Array Disks discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

arrayDiskEntry row .1.3.6.1.4.1.674.10893.1.20.130.4.1

An entry in the Array Disk table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

arrayDiskNumber

Column	Syntax	OID
arrayDiskNumbermandatory Instance number of this array disk entry.	Integer32 Constraints: range: 1-1000000000	.1.3.6.1.4.1.674.10893.1.20.130.4.1.1
arrayDiskNamemandatory The name of the array disk as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.2
arrayDiskVendormandatory The array disk's manufacturer's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.3
arrayDiskStatemandatory The current condition of the array disk. Possible states: 0: Unknown 1: Ready - Available for use, but no RAID configuration has been assigned. 2: Failed - Not operational. 3: Online - Operational. RAID configurati…	Enumeration Enumerated Values: 1 ready 2 failed 3 online 4 offline 6 degraded 7 recovering 11 removed 13 non-raid 14 notReady 15 resynching 22 replacing 23 spinningDown 24 rebuild 25 noMedia 26 formatting 27 unusable 28 diagnostics 34 predictiveFailure 35 initializing 39 foreign 40 clear 41 unsupported 53 incompatible 56 readOnly	.1.3.6.1.4.1.674.10893.1.20.130.4.1.4
arrayDiskSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.4.1.5
arrayDiskProductIDmandatory The model number of the array disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.6
arrayDiskSerialNomandatory The array disk's unique identification number from the manufacturer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.7
arrayDiskRevisionmandatory The firmware version of the array disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.8
arrayDiskEnclosureIDmandatory The SCSI ID of the enclosure processor to which this array disk belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.9
arrayDiskChannelmandatory The bus to which this array disk is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.10
arrayDiskLengthInMBmandatory The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.11
arrayDiskLengthInBytesmandatory The size of the array disk in bytes that is less than a megabyte. This size plus the arrayDiskLengthInMB is the total size of the array disk.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.12
arrayDiskLargestContiguousFreeSpaceInMBmandatory The size in megabytes of the largest contiguous free space on the array disk. If this size is 0, it is less than a megabyte.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.13
arrayDiskLargestContiguousFreeSpaceInBytesmandatory The size of the largest contiguous free space on this array disk in bytes that is less than a megabyte. This size plus the arrayDiskLargestContiguousFreeSpaceInMB is the total size of the largest contiguous free space…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.14
arrayDiskTargetIDmandatory The SCSI target ID which this array disk is assigned.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.674.10893.1.20.130.4.1.15
arrayDiskLunIDmandatory The array disk's logical unit number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.16
arrayDiskUsedSpaceInMBmandatory The amount in megabytes of the used space on the array disk. If this size is 0, it is smaller than a megabyte.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.17
arrayDiskUsedSpaceInBytesmandatory The size in bytes of the used space on the array disk that is smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is the total amount of used space on the array disk.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.18
arrayDiskFreeSpaceInMBmandatory The amount in megabytes of the free space on the array disk. If this size is 0, it is smaller than a megabyte.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.19
arrayDiskFreeSpaceInBytesmandatory The size in bytes of the free space on the array disk that is smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is the total amount of free space on the array disk.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.20
arrayDiskBusTypemandatory The bus type of the array disk. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe	Enumeration Enumerated Values: 1 scsi 2 ide 3 fibre 4 ssa 6 usb 7 sata 8 sas 9 pcie	.1.3.6.1.4.1.674.10893.1.20.130.4.1.21
arrayDiskSpareStatemandatory The status of the array disk as a spare. Possible states: 1 : disk is a member of a virtual disk 2 : disk is a member of a disk group 3 : disk is a global hot spare 4 : disk is a dedicated hot spare 5 : not a spare 99: …	Enumeration Enumerated Values: 1 memberVD 2 memberDG 3 globalHotSpare 4 dedicatedHotSpare 5 notASpare 99 notApplicable	.1.3.6.1.4.1.674.10893.1.20.130.4.1.22
arrayDiskRollUpStatusmandatory Severity of the array disk state. This is the combined status of the array disk and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.4.1.23
arrayDiskComponentStatusmandatory The status of the array disk itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.4.1.24
arrayDiskDeviceNamemandatory The operating system device name for this disk. This property is only applicable to array disks attached to a RAID controller.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.25
arrayDiskNexusIDmandatory Durable unique ID for this array disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.26
arrayDiskPartNumbermandatory The part number of the disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.27
arrayDiskSASAddressmandatory The specified SAS address if this is a SAS disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.28
arrayDiskNegotiatedSpeedmandatory The speed at which the drive is actually running in MPS (megabytes per second).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.29
arrayDiskCapableSpeedmandatory The maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.30
arrayDiskSmartAlertIndicationmandatory Indicated whether the disk has received a predictive failure. Possible values: 1: No - disk has not received a predictive failure alert 2: Yes - disk has received a predictive failure alert	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.674.10893.1.20.130.4.1.31
arrayDiskManufactureDaymandatory The day of the week (1=Sunday thru 7=Saturday) on which this disk was manufactured.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.32
arrayDiskManufactureWeekmandatory The week (1 thru 53) in which this disk was manufactured.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.33
arrayDiskManufactureYearmandatory The four digit year in which this disk was manufactured.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.34
arrayDiskMediaTypemandatory The Media type of the array disk. Possible Values: 1:unknown 2:hdd 3:ssd	Enumeration Enumerated Values: 1 unknown 2 hdd 3 ssd	.1.3.6.1.4.1.674.10893.1.20.130.4.1.35
arrayDiskDellCertifiedmandatory Indicates if array disk is certified by Dell. Value: 1 - Certified, 0 - Not Certified, 99 - Unknown	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.36
arrayDiskAltaVendorIdobsolete Provides vendor information for Alta interposer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.37
arrayDiskAltaProductIdobsolete Provides product id for Alta interposer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.38
arrayDiskAltaRevisionIdobsolete Provides revision id for Alta interposer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.39
arrayDiskEncryptionCapablemandatory Indicates if physical disk is Encryption capable. Value: 1 - Capable, 0 - Not Capable, 99 - Not Applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.40
arrayDiskEncryptedmandatory Indicates if the physical disk has encryption enabled. Value: 1 - Yes, 0 - No, 99 - Not Applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.41
arrayDiskPowerStatemandatory Indicates power state of a physical drive. Value: 0 - Spun up, 1- Spun down, 255 - Transition, 99 - Not Applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.42
arrayDiskDriveWriteCachemandatory Indicates drive write cache capability for PCIe SSD devices. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined/Not Applicable	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.43
arrayDiskModelNumbermandatory Provides PCIe SSD device model number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.44
arrayDiskLifeRemainingmandatory Provides PCIe SSD device life remaining in percentage. Value: 0..100, 999 - Undetermined/Not Applicable	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.674.10893.1.20.130.4.1.45
arrayDiskDriverVersionmandatory Provides PCIe SSD device driver version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.46
arrayDiskDeviceLifeStatusmandatory Provides PCIe SSD device life status. Possible Values: -1: Not Available / Not Applicable 1: Drive Health Good 2: Approaching Warranty Coverage Expiry 3: Warranty Coverage Expired 4: Approaching Read Only 5: Read Only	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.47
arrayDiskReadOnlymandatory Provides PCIe SSD's Read Only attribute. Possible Values: Yes, No, Not Applicable	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.48
arrayDiskRemainingRatedWriteEndurancemandatory Provides PCIe SSD device Remaining Rated Write Endurance Possible Values: 0-100% ,Not Available/Not Applicable	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.49
arrayDiskSectorSizemandatory Provides the information regarding sector size of array disk. Possible values are: 512 or 4096.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.50
arrayDiskPICapablemandatory Provides the information regarding T10 PI capability of Array disk. Possible values are: 0 (T10 PI incapable) or 1 (T10 PI capable).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.51
arrayDiskMaxLinkWidthmandatory Provides the information regarding Max Link Width of Array disk. Possible values are: 0 - 8.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.52
arrayDiskNegotiatedLinkWidthmandatory Provides the information regarding Negtioated Link Width of Array disk. Possible values are: 0 - 8.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.53
nonRAIDdiskCachePolicymandatory Displays the current disk write cache policy of the NonRAID disk. Possible values are: Enabled - Disabled.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.54
arraydiskCachePolicymandatory Displays the current disk write cache policy of the array disk. Possible values are: Enabled - Disabled - Default.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.55
arraydiskISECapablemandatory A boolean value depicitng if the disk is Instant Secure Erase Capable or not.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.56
arraydiskWWNmandatory Displays WWN for a disk.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.57
arraydiskEncryptionProtocolmandatory Displays Encrption Protocol for a disk. Possible Values: 0: No encryption 1: TCG Enterprise SSC 2: TCG Opal SSC	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.58
arraydiskErrorRecoverablemandatory Indicates if INIT error drive is recoverable. Values: 1- Yes, 0 - No, 99 - Not available / Not applicable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.59
arraydiskErrorDescriptionmandatory Displays description of INIT error.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.4.1.60
arraydiskAvailableSparemandatory Displays Available Spare for a PCIe SSD. Possible Values: 0-100 % Note: A value of 9999 indicates Not Applicable or Not Available	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.4.1.61

A table of the connections between array disks, their enclosure, 
and their associated controller.  For each object in the table, its
object number corresponds to an instance number in the appropriate 
MIB table for that object where all of the object properties can be found.
Note: Only array disks that are part of an enclosure will be listed
in this table.  Backplanes are considered enclosures by
Storage Management.

arrayDiskEnclosureConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.5.1

An entry in the Array Disk Enclosure Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

arrayDiskEnclosureConnectionNumber

Column	Syntax	OID
arrayDiskEnclosureConnectionNumbermandatory Instance number of this array disk connection entry. This table shows the array disk to enclosure relationship.	Integer32 Constraints: range: 1-1000000000	.1.3.6.1.4.1.674.10893.1.20.130.5.1.1
arrayDiskEnclosureConnectionArrayDiskNamemandatory The name of the array disk in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.5.1.2
arrayDiskEnclosureConnectionArrayDiskNumbermandatory The instance number of the array disk in the arrayDiskTable in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.5.1.3
arrayDiskEnclosureConnectionEnclosureNamemandatory The name of the enclosure as represented in Storage Management to which this array disk belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.5.1.4
arrayDiskEnclosureConnectionEnclosureNumbermandatory The instance number in the enclosureTable of the enclosure to which this array disk belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.5.1.5
arrayDiskEnclosureConnectionControllerNamemandatory The name of the controller as represented in Storage Management to which this array disk is connected.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.5.1.6
arrayDiskEnclosureConnectionControllerNumbermandatory The instance number in the controllerTable of the controller to which this array disk is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.5.1.7

A table of the connections between array disks, their channel, and 
their associated controller.  For each object in the table, its 
object number corresponds to an instance number in the appropriate 
MIB table for that object where all of the object properties can be 
found.
Note: Only array disks that are NOT part of an enclosure will be 
listed in this table.  Backplanes are considered enclosures by
Storage Management.

arrayDiskChannelConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.6.1

An entry in the Array Disk Channel Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

arrayDiskChannelConnectionNumber

Column	Syntax	OID
arrayDiskChannelConnectionNumbermandatory Instance number of this array disk connection entry. This table shows the array disk to SCSI channel relationship. There is no enclosure service processor associated with these array disks.	Integer32 Constraints: range: 1-1000000000	.1.3.6.1.4.1.674.10893.1.20.130.6.1.1
arrayDiskChannelConnectionArrayDiskNamemandatory The name of the array disk in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.6.1.2
arrayDiskChannelConnectionArrayDiskNumbermandatory The instance number of the array disk in the arrayDiskTable in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.6.1.3
arrayDiskChannelConnectionChannelNamemandatory The name of the channel as represented in Storage Management to which is array disk is connected.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.6.1.4
arrayDiskChannelConnectionChannelNumbermandatory The instance number of the channel in the channelTable to which this array disk is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.6.1.5
arrayDiskChannelConnectionControllerNamemandatory The name of the controller as represented in Storage Management to which this array disk is connected.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.6.1.6
arrayDiskChannelConnectionControllerNumbermandatory The instance number in the controllerTable of the controller to which this array disk is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.6.1.7

A table of managed Fans. The number of entries is 
related to number of Fans discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

fanEntry row .1.3.6.1.4.1.674.10893.1.20.130.7.1

An entry in the Fan table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

fanNumber

Column	Syntax	OID
fanNumbermandatory Instance number of this fan entry.	Integer32 Constraints: range: 1-1000000000	.1.3.6.1.4.1.674.10893.1.20.130.7.1.1
fanNamemandatory The fan's name as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.2
fanVendormandatory The fan's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.3
fanStatemandatory The current condition of the fan. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded 21: Missing	Enumeration Enumerated Values: 1 ready 2 failed 6 degraded 11 removed 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.7.1.4
fanSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.7.1.5
fanProbeUnitobsolete This entry is obsolete for Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.6
fanProbeMinWarningobsolete This entry is obsolete. This setting is not supported by fans managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.7
fanProbeMinCriticalobsolete This entry is obsolete. This setting is not supported by fans managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.8
fanProbeMaxWarningobsolete This entry is obsolete. This setting is not supported by fans managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.9
fanProbeMaxCriticalobsolete This entry is obsolete. This setting is not supported by fans managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.10
fanProbeCurrValuemandatory The current speed of the fan.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.11
fan1PartNumbermandatory The part number of the fan in the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.12
fan2PartNumberobsolete This entry is obsolete. This setting is not supported by fans managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.13
fanRollUpStatusmandatory Severity of the fan state. This is the combined status of the fan and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.7.1.14
fanComponentStatusmandatory The status of the fan itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.7.1.15
fanNexusIDmandatory Durable unique ID for this fan.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.16
fanRevisionmandatory The revision number of the fan in the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.7.1.17

A table of the connections between each fan on 
the managed node and its enclosure.  Each enclosure 
number in the table corresponds to that enclosure instance
in the Enclosure Table.

fanConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.8.1

An entry in the Fan Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

fanConnectionNumber

Column	Syntax	OID
fanConnectionNumbermandatory Instance number of this fan connection entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.8.1.1
fanConnectionFanNamemandatory The name of the fan in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.8.1.2
fanConnectionFanNumbermandatory The instance number of the fan in the fanTable in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.8.1.3
fanConnectionEnclosureNamemandatory The name of the enclosure as represented in Storage Management to which this fan belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.8.1.4
fanConnectionEnclosureNumbermandatory The instance number of the enclosure in the enclosureTable to which this fan belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.8.1.5

A table of managed Power Supplies. The number of entries is 
related to number of Power Supplies discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

powerSupplyEntry row .1.3.6.1.4.1.674.10893.1.20.130.9.1

An entry in the Power Supply table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

powerSupplyNumber

Column	Syntax	OID
powerSupplyNumbermandatory Instance number of this power supply entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.9.1.1
powerSupplyNamemandatory The power supply's name as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.2
powerSupplyVendormandatory The power supply's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.3
powerSupplyStatemandatory The current condition of the power supply. Possible states: 0 : Unknown 1 : Ready 2 : Failed 5 : Not Installed 6 : Degraded 11: Removed 21: Missing	Enumeration Enumerated Values: 1 ready 2 failed 5 notInstalled 6 degraded 11 removed 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.9.1.4
powerSupplySeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.9.1.5
powerSupply1PartNumbermandatory The part number of the power supply of the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.6
powerSupply2PartNumberobsolete This entry is obsolete. This setting is not supported by power supplies managed under Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.7
powerSupplyRollUpStatusmandatory Severity of the power supply state. This is the combined status of the power supply and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.9.1.8
powerSupplyComponentStatusmandatory The status of the power supply itself without the propegation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.9.1.9
powerSupplyNexusIDmandatory Durable unique ID for this power supply.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.10
powerSupplyRevisionmandatory The revision number of the power supply in the enclosure.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.9.1.11

A table of the connections between each power 
supply on the managed node and its enclosure.  Each
enclosure number in the table corresponds to that 
enclosure instance in the Enclosure Table.

powerSupplyConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.10.1

An entry in the Power Supply Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

powerSupplyConnectionNumber

Column	Syntax	OID
powerSupplyConnectionNumbermandatory Instance number of this power supply connection entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.10.1.1
powerSupplyConnectionPowersupplyNamemandatory The name of the power supply in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.10.1.2
powerSupplyConnectionPowersupplyNumbermandatory This instance number in the powersupplyTable of the power supply in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.10.1.3
powerSupplyConnectionEnclosureNamemandatory The name of the enclosure to which this power supply is connected as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.10.1.4
powerSupplyConnectionEnclosureNumbermandatory The instance number of the enclosure in the enclosureTable to which this power supply is connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.10.1.5
powerSupplyConnectionFirmwareVersionmandatory Displays power supply connection firmware version. Note: Available above 1.04 firmware version	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.10.1.6

A table of managed Temperature Probes. The number of entries is 
related to number of Temperature Probes discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

temperatureProbeEntry row .1.3.6.1.4.1.674.10893.1.20.130.11.1

An entry in the Temperature Probe table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

temperatureProbeNumber

Column	Syntax	OID
temperatureProbeNumbermandatory Instance number of this temperature probe entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.11.1.1
temperatureProbeNamemandatory Name of this temperature probe as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.11.1.2
temperatureProbeVendormandatory Temperature probe's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.11.1.3
temperatureProbeStatemandatory The current condition of the temperature probe. Possible states: 0: Unknown 1: Ready 2: Failed (Minimum Failure Threshold Exceeded, Maximum Failure Threshold Exceeded) 4: Offline 6: Degraded (Minimum Wa…	Enumeration Enumerated Values: 1 ready 2 failed 4 offline 6 degraded 9 inactive 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.11.1.4
temperatureProbeSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.11.1.5
temperatureProbeUnitmandatory The units that will be used to display temperatures for this temperature probe.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.11.1.6
temperatureProbeMinWarningmandatory The minimum temperature that will force the probe into a warning state.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.11.1.7
temperatureProbeMinCriticalmandatory The minimum temperature that will force the probe into an error state.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.11.1.8
temperatureProbeMaxWarningmandatory The maximum temperature that will force the probe into a warning state.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.11.1.9
temperatureProbeMaxCriticalmandatory The maximum temperature that will force the probe into an error state.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.11.1.10
temperatureProbeCurValuemandatory The current temperature of this probe.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.11.1.11
temperatureProbeRollUpStatusmandatory Severity of the temperature probe state. This is the combined status of the temperature probe and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.11.1.12
temperatureProbeComponentStatusmandatory The status of the temperature probe itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.11.1.13
temperatureProbeNexusIDmandatory Durable unique ID for this temperature probe.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.11.1.14

A table of the connections between each 
temperature probe on the managed node and its enclosure. 
Each enclosure number in the table corresponds to that 
enclosure instance in the Enclosure Table.

temperatureConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.12.1

An entry in the Temperature Probe Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

temperatureConnectionNumber

Column	Syntax	OID
temperatureConnectionNumbermandatory Instance number of this temperature probe connection entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.12.1.1
temperatureConnectionTemperatureNamemandatory The name of the temperature probe in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.12.1.2
temperatureConnectionTemperatureNumbermandatory The instance number in the temperatureTable of the temperature probe in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.12.1.3
temperatureConnectionEnclosureNamemandatory The name of the enclosure as represented in Storage Management to which this temperature probe belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.12.1.4
temperatureConnectionEnclosureNumbermandatory The instance number of the enclosure in the enclosureTable to which this temperature probe belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.12.1.5

A table of managed Enclosure Management Modules. The number of 
entries is related to number of Enclosure Management Modules
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

enclosureManagementModuleEntry row .1.3.6.1.4.1.674.10893.1.20.130.13.1

An entry in the Enclosure Management Module table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

enclosureManagementModuleNumber

Column	Syntax	OID
enclosureManagementModuleNumbermandatory Instance number of this enclosure memory module entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.13.1.1
enclosureManagementModuleNamemandatory Name of this enclosure memory module as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.2
enclosureManagementModuleVendormandatory The management module's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.3
enclosureManagementModuleStatemandatory The current condition of the enclosure management module. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 5: Not Installed 6: Degraded 21: Missing	Enumeration Enumerated Values: 1 ready 2 failed 3 online 4 offline 5 notInstalled 6 degraded 21 missing	.1.3.6.1.4.1.674.10893.1.20.130.13.1.4
enclosureManagementModuleSeverityobsolete This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.	Enumeration Enumerated Values: 1 warning 2 error 3 failure	.1.3.6.1.4.1.674.10893.1.20.130.13.1.5
enclosureManagementModulePartNumbermandatory The part number of the enclosure memory module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.6
enclosureManagementModuleTypemandatory The type of the enclosure management module. Possible values: 0: Unknown 1: EMM 2: Termination Card	Enumeration Enumerated Values: 1 eMM 2 terminationCard	.1.3.6.1.4.1.674.10893.1.20.130.13.1.7
enclosureManagementModuleFWVersionmandatory Firmware version of the enclosure memory module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.8
enclosureManagementModuleMaxSpeedmandatory The maximum bus speed of the enclosure management module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.9
enclosureManagementModuleRollUpStatusmandatory Severity of the enclosure management module state. This is the combined status of the EMM and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.13.1.10
enclosureManagementModuleComponentStatusmandatory The status of the enclosure management module itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.13.1.11
enclosureManagementModuleNexusIDmandatory Durable unique ID for this EMM.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.12
enclosureManagementModuleRevisionmandatory The revision number of the enclosure management module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.13.1.13

A table of the connections between each enclosure management module 
on the managed node and its enclosure.  Each enclosure 
number in the table corresponds to that enclosure instance
in the Enclosure Table.

enclosureManagementModuleConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.14.1

An entry in the Enclosure Management Module Connection table . A row in this
table cannot be created or deleted by SNMP operations on columns of the table.

Indexes

enclosureManagementModuleConnectionNumber

Column	Syntax	OID
enclosureManagementModuleConnectionNumbermandatory Instance number of this enclosure management module connection entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.14.1.1
enclosureManagementModuleConnectionEMMNamemandatory The name of the enclosure management module in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.14.1.2
enclosureManagementModuleConnectionEMMNumbermandatory The instance number of the enclosure management module in the enclosureManagementModuleTable in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.14.1.3
enclosureManagementModuleConnectionEnclosureNamemandatory The name of the enclosure as represented in Storage Management to which this enclosure management module belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.14.1.4
enclosureManagementModuleConnectionEnclosureNumbermandatory The instance number of the enclosure in the enclosureTable to which this enclosure management module belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.14.1.5

A table of managed Batteries. The number of 
entries is related to number of Batteries
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

batteryEntry row .1.3.6.1.4.1.674.10893.1.20.130.15.1

An entry in the Battery table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

batteryNumber

Column	Syntax	OID
batteryNumbermandatory Instance number of this battery entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.15.1.1
batteryNamemandatory The battery's name as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.15.1.2
batteryVendormandatory The battery's (re)seller's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.15.1.3
batteryStatemandatory Current state of battery. Possible values: 0: Unknown 1: Ready 2: Failed 6: Degraded 7: Reconditioning 9: High 10: Low Power 12: Charging 21: Missing 36: Learning	Enumeration Enumerated Values: 1 ready 2 failed 6 degraded 7 reconditioning 9 high 10 low 12 charging 21 missing 36 learning	.1.3.6.1.4.1.674.10893.1.20.130.15.1.4
batteryRollUpStatusmandatory Severity of the battery state. This is the combined status of the battery and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.15.1.5
batteryComponentStatusmandatory The status of the battery itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable	DellStatus Type Values: 1 other 2 unknown 3 ok 4 nonCritical 5 critical 6 nonRecoverable	.1.3.6.1.4.1.674.10893.1.20.130.15.1.6
batteryChargeCountmandatory The number of charges that have been applied to the battery.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.15.1.7
batteryMaxChargeCountmandatory The maximum number of charges that can be applied to the battery.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.15.1.8
batteryNexusIDmandatory Durable unique ID for this battery.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.15.1.9
batteryPredictedCapacityobsolete This property displays the battery's ability to be charged. Possible values: 1: Failed - The battery cannot be charged and needs to be replaced. 2: Ready - The battery can be charged to full capacity. 4: Unknown -…	Enumeration Enumerated Values: 1 failed 2 ready 4 unknown	.1.3.6.1.4.1.674.10893.1.20.130.15.1.10
batteryNextLearnTimeobsolete Time next learn cycle must be executed (in hours.)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.15.1.11
batteryLearnStateobsolete Specifies the learn state activity of the battery. Possible values: 1 : Failed 2 : Active 4 : Timed out 8 : Requested 16: Idle 32: Due	Enumeration Enumerated Values: 1 failed 2 active 4 timedOut 8 requested 16 idle 32 due	.1.3.6.1.4.1.674.10893.1.20.130.15.1.12
batteryIDmandatory Represents unique id for battery.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.15.1.13
batteryMaxLearnDelayobsolete The maximum amount of time (in hours) that the battery learn cycle can be delayed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.15.1.14
batteryLearnModeobsolete Indicates current learn mode of the battery. Possible values: 1: Auto 2: Warn 4: Autowarn 8: Unknown	Enumerationr/w Enumerated Values: 1 auto 2 warn 4 autowarn 8 unknown	.1.3.6.1.4.1.674.10893.1.20.130.15.1.15

A table of the connections between each 
battery on the managed node and its controller. 
Each controller number in the table corresponds to that 
controller instance in the Controller Table.

batteryConnectionEntry row .1.3.6.1.4.1.674.10893.1.20.130.16.1

An entry in the Battery Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

batteryConnectionNumber

Column	Syntax	OID
batteryConnectionNumbermandatory Instance number of this battery connection entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.16.1.1
batteryConnectionBatteryNamemandatory The name of the battery in this connection as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.16.1.2
batteryConnectionBatteryNumbermandatory The instance number in the batteryTable of the battery in this connection.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.16.1.3
batteryConnectionControllerNamemandatory The name of the controller as represented in Storage Management to which this battery belongs.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.16.1.4
batteryConnectionControllerNumbermandatory The instance number of the controller in the controllerTable to which this battery belongs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10893.1.20.130.16.1.5

A table of listed Tape Drives The number of entries is 
related to number of Tape Drives discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.

tapeDriveEntry row .1.3.6.1.4.1.674.10893.1.20.130.17.1

An entry in the Tape Library table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.

Indexes

tapeDriveNumber

Column	Syntax	OID
tapeDriveNumbermandatory Instance number of this tape drive entry.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.674.10893.1.20.130.17.1.1
tapeDriveNamemandatory The name of the tape drive as represented in Storage Management.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.17.1.2
tapeDriveVendormandatory The tape drive's manufacturer's name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.17.1.3
tapeDriveProductIDmandatory The model number of the tape drive	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.17.1.4
tapeDriveNexusIDmandatory Durable unique ID for this tape drive	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.17.1.5
tapeDriveBusTypemandatory The bus type of the tape drive. Possible values: 8. SAS	Enumeration Enumerated Values: 8 sas	.1.3.6.1.4.1.674.10893.1.20.130.17.1.6
tapeDriveSASAddressmandatory The specified SAS address if this is a SAS tape drive.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10893.1.20.130.17.1.7
tapeDriveMediaTypemandatory The Media type of the tape drive. Possible Values: 4:Tape	Enumeration Enumerated Values: 4 tape	.1.3.6.1.4.1.674.10893.1.20.130.17.1.8