SYSLOG-R-MIB
Syslog MIB.
- Source file
SYSLOG-R-MIB- Last revised
- Identity
syslogMIBR- Base OID
1.3.6.1.4.1.164.20.14
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RAD-SMI-MIB | radExperimental |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp |
Net-SNMP examples using the rad MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SYSLOG-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SYSLOG-R-MIB::syslogMIBR'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SYSLOG-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SYSLOG-R-MIB::syslogMIBR'
Objects (39)
Showing 39 of 39 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.164.20.14 |
||
.1.3.6.1.4.1.164.20.14.0 |
||
.1.3.6.1.4.1.164.20.14.1 |
||
.1.3.6.1.4.1.164.20.14.1.1 |
||
.1.3.6.1.4.1.164.20.14.1.1.1 |
||
.1.3.6.1.4.1.164.20.14.1.1.2 |
||
.1.3.6.1.4.1.164.20.14.1.2 |
||
.1.3.6.1.4.1.164.20.14.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.164.20.14.1.2.1.1 |
|
.1.3.6.1.4.1.164.20.14.1.2.1.11 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.12 |
||
|
Bits
|
.1.3.6.1.4.1.164.20.14.1.2.1.13 |
|
.1.3.6.1.4.1.164.20.14.1.2.1.2 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.3 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.4 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.5 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.6 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.7 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.8 |
||
.1.3.6.1.4.1.164.20.14.1.2.1.9 |
||
.1.3.6.1.4.1.164.20.14.1.3 |
||
.1.3.6.1.4.1.164.20.14.1.3.1 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.1 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.10 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.11 |
||
|
Integer32
|
.1.3.6.1.4.1.164.20.14.1.3.1.12 |
|
.1.3.6.1.4.1.164.20.14.1.3.1.13 |
||
|
Enumeration
|
.1.3.6.1.4.1.164.20.14.1.3.1.14 |
|
.1.3.6.1.4.1.164.20.14.1.3.1.2 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.3 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.4 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.5 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.6 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.7 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.8 |
||
.1.3.6.1.4.1.164.20.14.1.3.1.9 |
||
.1.3.6.1.4.1.164.20.14.3 |
||
.1.3.6.1.4.1.164.20.14.3.1 |
||
.1.3.6.1.4.1.164.20.14.3.2 |
Dependencies (6) 6 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- RAD-SMI-MIBrad
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- SYSLOG-R-MIBradselected
Type Definitions (3)
| Enumeration |
other(1)none(2)tls(3)beep(4) |
|
| Bits |
sender(0)receiver(1)relay(2) |
|
| OctetString |
range: 0..255 |
Conformance Groups (4)
Compliance Statements (5)
OID
.1.3.6.1.4.1.164.20.14.3.2.1The compliance statement for SNMP entities which
implement the SYSLOG-MIB with support for writable
objects and notifications. Such an implementation can
be both monitored and configured via SNMP. It can
also send notifications about change in the
operational status of the syslog entity.
implement the SYSLOG-MIB with support for writable
objects and notifications. Such an implementation can
be both monitored and configured via SNMP. It can
also send notifications about change in the
operational status of the syslog entity.
Required groups
| mandatory | syslogNotificationGroup | |
| mandatory | syslogDefaultGroup | |
| mandatory | syslogOperationsGroup | |
| mandatory | syslogControlGroup |
OID
.1.3.6.1.4.1.164.20.14.3.2.2The compliance statement for SNMP entities which
implement the SYSLOG-MIB with support for writable
objects. Such an implementation can
be both monitored and configured via SNMP.
implement the SYSLOG-MIB with support for writable
objects. Such an implementation can
be both monitored and configured via SNMP.
Required groups
| mandatory | syslogDefaultGroup | |
| mandatory | syslogOperationsGroup | |
| mandatory | syslogControlGroup |
OID
.1.3.6.1.4.1.164.20.14.3.2.3The compliance statement for SNMP entities which
implement the syslog MIB without support
for read-write (i.e. in read-only mode). It can
also send notifications about change in the
operational status of the syslog entity.
implement the syslog MIB without support
for read-write (i.e. in read-only mode). It can
also send notifications about change in the
operational status of the syslog entity.
Required groups
| mandatory | syslogNotificationGroup | |
| mandatory | syslogDefaultGroup | |
| mandatory | syslogOperationsGroup | |
| mandatory | syslogControlGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| syslogControlDescr | readonly | Write access is not required. | |
| syslogControlRoles | readonly | Write access is not required. | |
| syslogControlBindAddrType | readonly | Write access is not required. | |
| syslogControlBindAddr | readonly | Write access is not required. | |
| syslogControlService | readonly | Write access is not required. | |
| syslogControlEncapsulation | readonly | Write access is not required. | |
| syslogControlMaxMessageSize | readonly | Write access is not required. | |
| syslogControlConfFileName | readonly | Write access is not required. | |
| syslogControlStorageType | readonly | Write access is not required. | |
| syslogControlRowStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.164.20.14.3.2.4The compliance statement for SNMP entities which
implement the syslog MIB without support
for read-write (i.e. in read-only mode).
implement the syslog MIB without support
for read-write (i.e. in read-only mode).
Required groups
| mandatory | syslogDefaultGroup | |
| mandatory | syslogOperationsGroup | |
| mandatory | syslogControlGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| syslogControlDescr | readonly | Write access is not required. | |
| syslogControlRoles | readonly | Write access is not required. | |
| syslogControlBindAddrType | readonly | Write access is not required. | |
| syslogControlBindAddr | readonly | Write access is not required. | |
| syslogControlService | readonly | Write access is not required. | |
| syslogControlEncapsulation | readonly | Write access is not required. | |
| syslogControlMaxMessageSize | readonly | Write access is not required. | |
| syslogControlConfFileName | readonly | Write access is not required. | |
| syslogControlStorageType | readonly | Write access is not required. | |
| syslogControlRowStatus | readonly | Write access is not required. |
OID
.1.3.6.1.4.1.164.20.14.3.2.5The compliance statement for SNMP entities
which implement the SYSLOG-MIB and support
only notifications about change in the
operational status of a syslog entity.
which implement the SYSLOG-MIB and support
only notifications about change in the
operational status of a syslog entity.
Required groups
| mandatory | syslogNotificationGroup |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.164.20.14.0.1 |
This notification is sent when a syslog entity
changes state. For example when the syslog entity starts [syslogOperationsStatus is ''started'' ] or the syslog entity stops [syslogOperationsStatus is ''suspended'' or ''stopped'']. The value of syslogOperationsStatus will be the new status of the syslog entity after the change. The syslog entity corresponding to the notification will be identified by the syslogOperationsIndex instance identifier of the objects in the notification. |