SYNOPTICS-ETHERNET-MIB Table View

A table of board-related objects.  The number of
entries is given by the number of Ethernet host
module and network management module boards that
are contained in same backplane Ethernet segment
as the reporting NMM.

s3EnetBoardEntry row .1.3.6.1.4.1.45.1.3.2.2.1.1

A table containing objects about Ethernet boards
which are currently plugged into the 3000 chassis.

Indexes

s3EnetBoardIndex

Column	Syntax	OID
s3EnetBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.1.1.1
s3EnetBoardTypeobsolete See s3SlotModuleType	Enumeration Enumerated Values: 1 empty 2 other 3 m3302 4 m3304-ST 5 m3305 6 m3308 7 m3313 8 m3313M 9 m3314-ST 10 m3314M-ST 11 m3323 12 m3324-ST 16 m3301 17 m3307 18 m3356 24 m3383 25 m3384 26 m331x 32 m3386 33 m3394 34 m3395 35 m3323S 36 m3324S-ST 37 m3307A 38 m3308A	.1.3.6.1.4.1.45.1.3.2.2.1.1.2
s3EnetBoardHwVerobsolete See s3CommonBoardHwVer	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.1.1.3
s3EnetBoardStatusobsolete See s3CommonBoardStatus	Enumeration Enumerated Values: 1 ok 2 fail	.1.3.6.1.4.1.45.1.3.2.2.1.1.4
s3EnetBoardResetobsolete See s3CommonBoardReset	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.4.1.45.1.3.2.2.1.1.5
s3EnetBoardPartStatusobsolete See s3CommonBoardPartStatus	Enumerationr/w Enumerated Values: 1 enabled 2 partition	.1.3.6.1.4.1.45.1.3.2.2.1.1.6
s3EnetBoardNmCntlStatusobsolete See s3CommonBoardCntlStatus	Enumeration Enumerated Values: 1 notNmControl 2 nmControl	.1.3.6.1.4.1.45.1.3.2.2.1.1.7
s3EnetBoardPsStatusobsolete See s3CommonBoardPsStatus	Enumeration Enumerated Values: 1 ok 2 fail	.1.3.6.1.4.1.45.1.3.2.2.1.1.8
s3EnetBoardFrmsRxOkmandatory This contains a count of frames that are successfully received by the board. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. This counter includes broadcast a…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.9
s3EnetBoardOctetsRxOkmandatory Contains a count of data and padding octets in frames that are successfully received by the board. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. This counte…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.10
s3EnetBoardMcastFrmsRxOkmandatory This contains a count of frames that are successfully received by the board and are directed to an active non-broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignmen…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.11
s3EnetBoardBcastFrmsRxOkmandatory This contains a count of frames that are successfully received by the board and are directed to the broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.12
s3EnetBoardCollsmandatory This contains a board level count of collisions. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level collision 'flags' for this board.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.13
s3EnetBoardTooLongErrorsmandatory This contains a count of frames that are received by the board and exceed the maximum permitted frame size. This counter is incremented when the frameTooLong error is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.14
s3EnetBoardRuntErrorsmandatory This contains a count of frames received by the board that are less than the minimum permitted frame size and have a good FCS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.15
s3EnetBoardAlignErrorsmandatory This contains a count of frames received by the board that are not an integral number of octets in length and do not pass the FCS check. This counter is incremented when the alignmentError status is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.16
s3EnetBoardFcsErrorsmandatory This contains a count of frames received by the board that are an integral number of octets in length that do not pass the FCS check. This counter is incremented when the frameCheckError status is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.17
s3EnetBoardLateCollErrorsmandatory This contains a count of the board level late collisions. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level late collision 'flags' for this board.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.18
s3EnetBoardAuthStatusmandatory This object is only used if s3EnetConcSecureStatus is set to slotCheckOn(4). In this case, turning this object on(2) means that any node that is heard on this board which is not allowed on this board (i.e., not in Auth…	Enumerationr/w Enumerated Values: 1 other 2 on 3 off	.1.3.6.1.4.1.45.1.3.2.2.1.1.19
s3EnetBoardAuthActionmandatory If s3EnetConcSecureStatus is slotCheckOn(4) and s3EnetBoardAuthStatus is on(2) and an authorized nodes violation occurs on the board, then the action specified by this object will take place. On a partition, only the p…	Enumerationr/w Enumerated Values: 1 other 2 noAction 3 sendTrap 4 partition 5 sendTrapPartition	.1.3.6.1.4.1.45.1.3.2.2.1.1.20
s3EnetBoardUpStampmandatory The time ( in hundredths of a second) that the board was first seen as a member of this NMM's segment.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.2.1.1.21

A table of Local Bridge Board entries.  The number of
entries is determined by  the Concentrator Slot
Configuration Table.  Only those entries that are
Ethernet local bridges will have entries in this list.

s3EnetLocBridgeEntry row .1.3.6.1.4.1.45.1.3.2.2.2.1.1

A table containing objects about Boards which are
local bridges that are currently plugged into the
3000 chassis.

Indexes

s3EnetLocBridgeIndex

Column	Syntax	OID
s3EnetLocBridgeIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.1
s3EnetLocBridgeDescrmandatory Description of the local bridge board.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.2
s3EnetLocBridgePortCountmandatory Number of ports that are on the local bridge board.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.3
s3EnetLocBridgeDiagStsmandatory Latest Diagnostic LED Status that has been recorded.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.4
s3EnetLocBridgeBootStsmandatory The current status of the board as it relates to rebooting.	Enumeration Enumerated Values: 1 other 2 reqstToBoot 3 notReqstToBoot	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.5
s3EnetLocBridgeStandbyStsmandatory This status says whether the local bridge is active or in standby mode.	Enumeration Enumerated Values: 1 other 2 standby 3 notStandby	.1.3.6.1.4.1.45.1.3.2.2.2.1.1.6

A table of Port entries that are part of a local
bridge.  The number of entries is determined by knowing
the number of local bridge boards that are installed
by looking at s3ChassisSlotConfigTable and by knowing
how many ports are on a local bridge board by looking at
s3EnetLocBridgePortCount.

s3EnetLocBridgePortEntry row .1.3.6.1.4.1.45.1.3.2.2.2.2.1

A table containing objects about the ports of the
local bridges that are currently plugged into the
3000 chassis.

Indexes

s3EnetLocBridgePortSlotIndex s3EnetLocBridgePortIndex

Column	Syntax	OID
s3EnetLocBridgePortSlotIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.1
s3EnetLocBridgePortIndexmandatory A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.2
s3EnetLocBridgePortMdaIdmandatory Medium dependent ID for the port. See s3SlotModuleMdaId in the SynOptics Common MIB.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.3
s3EnetLocBridgePortIfmandatory Bridge interface types.	Enumeration Enumerated Values: 1 other 2 etherEther 3 etherTokenRing	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.4
s3EnetLocBridgePortDescrmandatory A text description of the port.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.5
s3EnetLocBridgePortOpStsmandatory Operating status of the port.	Enumeration Enumerated Values: 1 other 2 standby 3 notStandby	.1.3.6.1.4.1.45.1.3.2.2.2.2.1.6

A table of Remote Bridge Board entries.  The number
of entries is determined by the Concentrator Slot
Configuration Table.  Only those entries that are
Ethernet remote bridges will have entries in this list.

s3EnetRemBridgeEntry row .1.3.6.1.4.1.45.1.3.2.2.3.1.1

A table containing objects about Boards which are
remote bridges that are currently plugged into the
3000 chassis.

Indexes

s3EnetRemBridgeIndex

Column	Syntax	OID
s3EnetRemBridgeIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.1
s3EnetRemBridgeDescrmandatory Description of the board.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.2
s3EnetRemBridgePortCountmandatory Number of ports that are on the board.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.3
s3EnetRemBridgeDiagStsmandatory Latest Diagnostic LED Status that has been recorded.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.4
s3EnetRemBridgeBootStsmandatory The current status of the board as it relates to rebooting.	Enumeration Enumerated Values: 1 other 2 reqstToBoot 3 notReqstToBoot	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.5
s3EnetRemBridgeStandbyStsmandatory This status says whether the remote bridge is active or in standby mode.	Enumeration Enumerated Values: 1 other 2 standby 3 notStandby	.1.3.6.1.4.1.45.1.3.2.2.3.1.1.6

A table of Port entries that are part of a remote
bridge.  The number of entries is determined by
knowing the number of remote bridge boards that are
installed by looking at s3ChassisSlotConfigTable and
by knowing how many ports are on a remote bridge
board by looking at s3EnetRemBridgePortCount.

s3EnetRemBridgePortEntry row .1.3.6.1.4.1.45.1.3.2.2.3.2.1

A table containing objects about the ports of the
remote bridges that are currently plugged into the
3000 chassis.

Indexes

s3EnetRemBridgePortSlotIndex s3EnetRemBridgePortIndex

Column	Syntax	OID
s3EnetRemBridgePortSlotIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.1
s3EnetRemBridgePortIndexmandatory A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.2
s3EnetRemBridgePortMdaIdmandatory Medium dependent ID for the port.	Enumeration Enumerated Values: 1 other 2 ethernet 3 x21Barrier 4 x21Unbarrier 5 rs232 6 rs449 7 v35 8 g703 9 t1	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.3
s3EnetRemBridgePortDescrmandatory A text description of the port.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.4
s3EnetRemBridgePortOpStsmandatory Operating status of the port.	Enumeration Enumerated Values: 1 other 2 standby 3 operational 4 noLink	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.5
s3EnetRemBridgePortRdySndmandatory Ready to send status of the port.	Enumeration Enumerated Values: 1 other 2 rdySnd 3 notRdySnd	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.6
s3EnetRemBridgePortClrSndmandatory Clear to send status of the port.	Enumeration Enumerated Values: 1 other 2 clrSnd 3 notClrSnd	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.7
s3EnetRemBridgePortCarDtmandatory Carrier detect status of the port.	Enumeration Enumerated Values: 1 other 2 carDt 3 noCarDt	.1.3.6.1.4.1.45.1.3.2.2.3.2.1.8

A table of Router Board entries.  The number of
entries is determined by  the Concentrator Slot
Configuration Table.  Only those entries that
are Ethernet routers will have entries in this list.

s3EnetRouterEntry row .1.3.6.1.4.1.45.1.3.2.2.4.1.1

A table containing objects about Boards which
are routers that are currently plugged into the
3000 chassis.

Indexes

s3EnetRouterIndex

Column	Syntax	OID
s3EnetRouterIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.4.1.1.1
s3EnetRouterDescrmandatory Description of the router board.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.45.1.3.2.2.4.1.1.2
s3EnetRouterDiagStsmandatory Latest Diagnostic LED Status that has been recorded.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.45.1.3.2.2.4.1.1.3
s3EnetRouterStandbyStsmandatory This status says whether the router is active or in standby mode.	Enumeration Enumerated Values: 1 other 2 standby 3 notStandby	.1.3.6.1.4.1.45.1.3.2.2.4.1.1.4

Information maintained for each Ethernet board.  The
information can be retrieved for any Ethernet board,
even if the board is not on the same backplane Ethernet
segment as this NMM.
          
The instance is the slot number of the concentrator
that the board occupies.

s3EnetCommonBoardEntry row .1.3.6.1.4.1.45.1.3.2.2.5.1

There is one entry per Ethernet board in this table.

Indexes

s3EnetCommonBoardIndex

Column	Syntax	OID
s3EnetCommonBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializatio…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.2.5.1.1
s3EnetCommonBoardEnetABmandatory The channel to which the board is connected. The primary use of this object is for providing realtime switching of boards between channel A and channel B. It is also returned in the enetChannelChange trap, in which cas…	Enumerationr/w Enumerated Values: 1 other 2 enetA 3 enetB 4 enetAandEnetB	.1.3.6.1.4.1.45.1.3.2.2.5.1.2
s3EnetCommonBoardChanSwitchmandatory The agent will return switchCapable(2) for any Ethernet host board which can be switched between Ethernet channels. The value notSwitchCapable(3) indicates that the Ethernet board can not be switched to another channel.	Enumeration Enumerated Values: 1 other 2 switchCapable 3 notSwitchCapable	.1.3.6.1.4.1.45.1.3.2.2.5.1.3
s3EnetCommonBoardRedundmandatory The agent will return redundCapable(2) for any Ethernet host board which can provide hardware and/or software controlled redundancy on the port level. The value notRedundCapable(3) indicates that the Ethernet board can…	Enumeration Enumerated Values: 1 other 2 redundCapable 3 notRedundCapable	.1.3.6.1.4.1.45.1.3.2.2.5.1.4

A list of port entries.  The number of entries is
given by learning the type of board from the
information in the s3ChassisSlotConfigTable.

s3EnetPortEntry row .1.3.6.1.4.1.45.1.3.2.3.1.1

A table containing objects about the Ports of
each board plugged into the 3000 chassis which
are on the same backplane Ethernet segment as
the reporting NMM.

Indexes

s3EnetPortBoardIndex s3EnetPortIndex

Column	Syntax	OID
s3EnetPortBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one reinitialization of the entity's network management system to the next reinitialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.1.1.1
s3EnetPortIndexmandatory A unique value for each port. Its value is dependent on the board type. The value for each port must remain constant at least from one re-initialization of the entity's network management system to the next re-initial…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.1.1.2
s3EnetPortLinkStatusobsolete Tells whether the port is receiving link status.	Enumeration Enumerated Values: 1 off 2 on 3 other	.1.3.6.1.4.1.45.1.3.2.3.1.1.3
s3EnetPortPartStatusobsolete This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed partition is desired, then writing timedParti…	Enumerationr/w Enumerated Values: 1 enabled 2 partition 3 autoPartition 4 timedPartition 5 latSecPartition	.1.3.6.1.4.1.45.1.3.2.3.1.1.4
s3EnetPortJabberStatusmandatory Tells whether the DTE connected to the Port is jabbering or not.	Enumeration Enumerated Values: 1 ok 2 jabbering	.1.3.6.1.4.1.45.1.3.2.3.1.1.5
s3EnetPortFrmsRxOkmandatory This contains a count of frames that are successfully received by the port. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. This counter includes broadcast and multicast fr…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.6
s3EnetPortOctetsRxOkmandatory Contains a count of data and padding octets in frames that are successfully received by the port. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. This counter…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.7
s3EnetPortMcastFrmsRxOkmandatory This contains a count of frames that are successfully received by the port and are directed to an active non-broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignment…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.8
s3EnetPortBcastFrmsRxOkmandatory This contains a count of frames that are successfully received by the port and are directed to the broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.9
s3EnetPortCollsmandatory This contains a count of collisions. For NMM+ this is a true counter. For other NMMs this is a count of the collision flags.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.10
s3EnetPortTooLongErrorsmandatory This contains a count of frames that are received by the port and exceed the maximum permitted frame size. This counter is incremented when the frameTooLong error is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.11
s3EnetPortRuntErrorsmandatory This contains a count of frames received by the port that are less than the minimum permitted frame size and have a good FCS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.12
s3EnetPortAlignErrorsmandatory This contains a count of frames received by the port that are not an integral number of octets in length and do not pass the FCS check. This counter is incremented when the alignmentError status is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.13
s3EnetPortFcsErrorsmandatory This contains a count of frames received the port that are an integral number of octets in length that do not pass the FCS check. This counter is incremented when the frameCheckError status is detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.14
s3EnetPortLateCollErrorsmandatory This contains a count of late collisions. For NMM+ this is a true counter. For other NMMs this is a count of the late collision flags.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.15
s3EnetPortAuthStatusmandatory This object is only used if s3EnetConcSecureStatus is set to portCheckOn(3) or if the port is on a LattisSecure Host Module. In this case, turning this object on(2) means that any node that heard on this …	Enumerationr/w Enumerated Values: 1 other 2 on 3 off	.1.3.6.1.4.1.45.1.3.2.3.1.1.16
s3EnetPortAuthActionmandatory If s3EnetConcSecureStatus is portCheckOn(3) or this port is on a LattisSecure Host Module, and s3EnetPortAuthStatus is on(2) and an authorized nodes violation occurs on this port, then the action specified by this objec…	Enumerationr/w Enumerated Values: 1 other 2 noAction 3 sendTrap 4 partition 5 sendTrapPartition	.1.3.6.1.4.1.45.1.3.2.3.1.1.17
s3EnetPortPartTimeobsolete When partitioning the port for a specified time, s3EnetPortPartStatus must be set with timedpartition(4) and this object must be supplied with the duration value. If a PDU sets s3EnetPortPartStatus and not this object,…	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.1.1.18
s3EnetPortTypeobsolete The media connection type for this port. Note that this object was called s3EnetPortMDIXSwitch in the Ethernet 3.3 and 4.0 MIBs.	Enumeration Enumerated Values: 1 other 2 tenBaseT 3 tenBaseTMdi 4 aui 5 bnc 6 foirl 7 tenBaseFL 8 switch 9 switchMdi 10 tenBaseFLRedund	.1.3.6.1.4.1.45.1.3.2.3.1.1.19
s3EnetPortInterconStatusmandatory This object tells whether the port is connected to a host or to an interconnect (defined to be another NMM that is sending hello messages). The NMM agent will assign this object the value other(1) on init…	Enumeration Enumerated Values: 1 other 2 interconnect	.1.3.6.1.4.1.45.1.3.2.3.1.1.20
s3EnetPortAddrCollectmandatory This object tells whether the NMM should collect node address information from this port for the Find Nodes, Show Nodes, and Traffic Matrix (NMM+ only) tables. By default, the node addresses are collected…	Enumerationr/w Enumerated Values: 1 default 2 neverCollect 3 alwaysCollect	.1.3.6.1.4.1.45.1.3.2.3.1.1.21
s3EnetPortAddrLearnModemandatory This object indicates whether the port should automatically learn the port address by reading the source address on the incoming packets. This object applies only to ports on a LattisSecure Host Module. For other ports…	Enumerationr/w Enumerated Values: 1 other 2 noAutoLearn 3 continuousLearn 4 oneShotLearn	.1.3.6.1.4.1.45.1.3.2.3.1.1.22
s3EnetPortTxSecuritymandatory This value of this object is meaningful only when s3EnetConcSecureStatus is not set to concSecureOff(5) (i.e., if security features are activated on the concentrator). This object applies only to ports on…	Enumerationr/w Enumerated Values: 1 other 2 on 3 off	.1.3.6.1.4.1.45.1.3.2.3.1.1.23

This table provides a list of port entries.  The
number of entries is given for any Ethernet board
in the concentrator, even if the board is not on the
same Ethernet segment as this NMM.

s3EnetCommonPortEntry row .1.3.6.1.4.1.45.1.3.2.3.2.1

A table containing objects about the ports of each
Ethernet board plugged into the 3000-series chassis.

Indexes

s3EnetCommonPortBoardIndex s3EnetCommonPortIndex

Column	Syntax	OID
s3EnetCommonPortBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initializati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.2.1.1
s3EnetCommonPortIndexmandatory A unique value for each port. Its value is dependent on the board type.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.2.1.2
s3EnetCommonPortLinkStatusmandatory Tells whether the port is receiving link status.	Enumeration Enumerated Values: 1 off 2 on 3 other	.1.3.6.1.4.1.45.1.3.2.3.2.1.3
s3EnetCommonPortPartStatusmandatory This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed partition is desired, then writing timedParti…	Enumerationr/w Enumerated Values: 1 enabled 2 partition 3 autoPartition 4 timedPartition 5 latSecPartition	.1.3.6.1.4.1.45.1.3.2.3.2.1.4
s3EnetCommonPortTypemandatory The media connnection type for this port. Note that this object was called s3EnetPortMDIXSwitch in the Ethernet 3.3 and 4.0 MIBs.	Enumeration Enumerated Values: 1 other 2 tenBaseT 3 tenBaseTMdi 4 aui 5 bnc 6 foirl 7 tenBaseFL 8 switch 9 switchMdi 10 tenBaseFLRedund	.1.3.6.1.4.1.45.1.3.2.3.2.1.5
s3EnetCommonPortPartTimemandatory When partitioning the port for a specified time, s3EnetCommonPortPartStatus must be set with timedPartition(4) and this object must be supplied with the duration value. If a PDU sets s3EnetCommonPortPartStatus and not …	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.2.1.6

A table of ports for each 10BASE-FL board with
redundancy capability.  The number of boards is
determined by checking s3EnetCommonBoardRedund having
a value of redundCapable(2) for each board in table
s3EnetCommonBoardTable.

s3EnetRedPortEntry row .1.3.6.1.4.1.45.1.3.2.3.3.1

An entry in the table of ports on boards with
redundancy capability. Entries in the table cannot
be created or deleted via SNMP.

Row modification via SNMP is allowed only for ports
that support either hardw…

Indexes

s3EnetRedPortBoardIndex s3EnetRedPortIndex

Column	Syntax	OID
s3EnetRedPortBoardIndexmandatory The index of the slot containing the board. The value for each board must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.3.1.1
s3EnetRedPortIndexmandatory The index of the port on the module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.3.1.2
s3EnetRedPortRedundModemandatory The redundancy mode of the port. The possible values read, which report the redundancy mode of the port, are: standalone(1)...the port is not in any redundant pair. hwActive(2).....the port is the ac…	Enumerationr/w Enumerated Values: 1 standAlone 2 hwActive 3 hwStandby 4 swActive 5 swStandby	.1.3.6.1.4.1.45.1.3.2.3.3.1.3
s3EnetRedPortOperStatusmandatory This object indicates port's redundancy status. The values are: other(1).........none of the following ok(2)............no fault localFault(3)....the local port has sensed a fault condition. remoteFault(4)...the…	Enumeration Enumerated Values: 1 other 2 ok 3 localFault 4 remoteFault	.1.3.6.1.4.1.45.1.3.2.3.3.1.4
s3EnetRedPortRemoteOperStatusmandatory This object reflects the real time status of the received data from the remote port. A value of snpxFLRemFltCpblPortUp(1) indicates that the remote port is capable of 10BASE-FL signaling, as well as SynOp…	Enumeration Enumerated Values: 1 snpxFLRemFltCpblPortUp 2 snpxFLFBRemFltCpblPortUp 3 tenBaseFLPortUp 4 tenBaseFBPortUp 5 snpxRemFltCpblPortFault 6 tenBaseFBPortFault 7 unknown	.1.3.6.1.4.1.45.1.3.2.3.3.1.5
s3EnetRedPortCompanionSlotNomandatory The slot number of the other port which is in the redundant pair. In the case of a standalone port, a value of 0 will be returned. Note: This object is only writable for ports that support softwa…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.3.1.6
s3EnetRedPortCompanionPortNomandatory The port number of the other port which is in the redundant pair. In the case of a standalone port, a value of 0 will be returned. Note: This object is only writable for ports that support softwa…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.3.3.1.7
s3EnetRedPortSwitchoverStatusmandatory The switchover status of the redundant port pair. The following values can be written: timedSwitchover(2)...Immediately causes the active port to become the standby …	Enumerationr/w Enumerated Values: 1 other 2 timedSwitchover	.1.3.6.1.4.1.45.1.3.2.3.3.1.8
s3EnetRedPortSwitchoverTimemandatory The length of time before the ports making up the redundant port pair revert back to their orignal active or standby roles as defined before the timed switchover was setup. The value of this object is mea…	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.3.3.1.9
s3EnetRedPortCapabilitymandatory The redundancy capability of the port: hwRedOnly(1).........hardware redundancy only. swRedOnly(2).........software redundacy only. notRedunCapable(3)...port not capable of being configured into a r…	Enumeration Enumerated Values: 1 hwRedOnly 2 swRedOnly 3 notRedunCapable	.1.3.6.1.4.1.45.1.3.2.3.3.1.10

See s3AgentTrapReceiverTable

s3EnetNmmTrapServerEntry row .1.3.6.1.4.1.45.1.3.2.4.20.1

See s3AgentTrapReceiverEntry

Indexes

s3EnetNmmTrapServerAddress

Column	Syntax	OID
s3EnetNmmTrapTypeobsolete See s3AgentTrapRcvrStatus	Enumerationr/w Enumerated Values: 1 other 2 invalid	.1.3.6.1.4.1.45.1.3.2.4.20.1.1
s3EnetNmmTrapServerAddressobsolete See s3AgentTrapRcvrNetAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.3.2.4.20.1.2
s3EnetNmmTrapServerCommobsolete See s3AgentTrapRcvrComm	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.45.1.3.2.4.20.1.3

Table containing a list of all of the nodes that have
been active during the aging interval that are currently
connected to the network through this concentrator.
This table is different from the FindNodes table in that
this table is indexed using the slot, port, and MAC address
attributes associated with the node.  This allows a
manager to get all nodes based on slot, slot-port, or
slot-port-MAC.

s3EnetShowNodesEntry row .1.3.6.1.4.1.45.1.3.2.5.1.1

List of nodes active on the concentrator and the slot
and port the nodes are on.

Indexes

s3EnetShowNodesSlotIndex s3EnetShowNodesPortIndex s3EnetShowNodesMacAddress

Column	Syntax	OID
s3EnetShowNodesSlotIndexmandatory The board number the node is on. Valid entries are 1-12.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.1.1.1
s3EnetShowNodesPortIndexmandatory The port number the node is on. Valid entries are 1-12.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.1.1.2
s3EnetShowNodesMacAddressmandatory This object contains the MAC address (i.e. the Ethernet address) of the node.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.5.1.1.3
s3EnetShowNodesStatusmandatory The status of the node. Determines whether the node has actively transmitted or not over the last 5 seconds.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.45.1.3.2.5.1.1.4
s3EnetShowNodesVendorTypeobsolete The vendor type of the adapter seen on this port. If the vendor is unknown other(1) should be returned.	Enumeration Enumerated Values: 1 other 2 threeCom	.1.3.6.1.4.1.45.1.3.2.5.1.1.5
s3EnetShowNodesAuthStatusmandatory The object is used determine how the node was added to this table. If the node was learned by listening to the network then on reads network(2) should be returned. If the node is another NMM or known concentrator devi…	Enumeration Enumerated Values: 1 other 2 network 3 nmm 4 authorized	.1.3.6.1.4.1.45.1.3.2.5.1.1.6

Table containing a list of all of the nodes that have
been active during the aging interval  that are
currently connected to the network through this
concentrator.  This table is different than the
ShowNodes table in that this table is index using
only the MAC address attribute associated with the node.
This allows a manager to be able to quickly determine
if a node with a particular MAC address is located
on this concentrator or not.

s3EnetFindNodesEntry row .1.3.6.1.4.1.45.1.3.2.5.3.1

Entry in the table containing the slot, port and MAC
address of a node connected to the Ethernet through
this concentrator.

Indexes

s3EnetFindNodesMacAddress

Column	Syntax	OID
s3EnetFindNodesMacAddressmandatory MAC address of node that this entry in the table is for.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.5.3.1.1
s3EnetFindNodesSlotIndexmandatory The board that the node is connected through.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.3.1.2
s3EnetFindNodesPortIndexmandatory The port that the node is connected through.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.3.1.3

Table containing a list of MAC addresses and the slot
and ports that the MAC address is allowed to be heard on,
in case the authorized node feature is turned on.
          
If a MAC is allowed on any slot and port then the entry
will have the slot=0 and the port=0.  If the MAC address
is allowed on a particular board then slot=allowed board
and port=0.  If the MAC is only allowed on one port then
the entry will contain a slot value and port value
between 1-12.
          
Allowed nodes for LattisSecure ports must be configured
for that specific port.  The agent will reject an attempt
to create a slot-level entry for slot=x, port=0, if the
board in slot x is a LattisSecure Host Module.  Only a
single address may be configured for a LattisSecure port.
Adding a second address (with the same LattisSecure
slot-port number) to the table will cause the first
address to be replaced with the new entry.
          
A MAC address can only appear in the table one time.
To determine when a station heard on the network must
be verified in this table please read the complete
description of the authorized node list feature as
described with object S3EnetConcAuthStatus.
          
Entries in this table may be downloaded via the CFG file
or can be added via SNMP.  All adds via SNMP will be
lost when the system is reset.

s3EnetAuthNodesEntry row .1.3.6.1.4.1.45.1.3.2.5.4.1

Entry in the table containing a MAC address of a
node that is allowed on the ethernet through this
concentrator.

Indexes

s3EnetAuthNodesMacAddr

Column	Syntax	OID
s3EnetAuthNodesMacAddrmandatory MAC address of node that this entry in the table is for.	RFC1213-MIBPhysAddressr/w Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.5.4.1.1
s3EnetAuthNodesSlotIndexmandatory The board that the node is allowed to be heard through. If this object is 0, then the MAC address is allowed on any board in the concentrator. In this case s3EnetAuthNodesPortIndex should also be 0. Otherwise, this ob…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.4.1.2
s3EnetAuthNodesPortIndexmandatory The port that the node is allowed to be heard through. If this object is 0, then the MAC address of this entry is allowed to connect to any port on the board (if s3EnetAuthNodesSlotIndex is not 0) or if s3EnetAuthNodesS…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.5.4.1.3
s3EnetAuthNodesStatusmandatory The status of the AuthNodes entry. The primary use of this object is for modifying the AuthNodes table. It is also returned in the enetAuthViolation trap, in which case it indicates whether the violating MAC address wa…	Enumerationr/w Enumerated Values: 1 invalid 2 valid	.1.3.6.1.4.1.45.1.3.2.5.4.1.4

A table of the NMM's in the flat network.

s3EnetTopNmmEntry row .1.3.6.1.4.1.45.1.3.2.6.1.1.1

Table that contains information about NMMs that are
in the same flat network as this NMM.

Indexes

s3EnetTopNmmSlot s3EnetTopNmmPort s3EnetTopNmmIpAddr

Column	Syntax	OID
s3EnetTopNmmSlotmandatory Slot that the NMM this entry is for can be found using the topology protocol. This is the slot from which a topology message was received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.1
s3EnetTopNmmPortmandatory Port that the NMM this entry is for can be found using the topology protocol. This is the port from which a topology message was received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.2
s3EnetTopNmmIpAddrmandatory IpAddress of the NMM this entry is for. This is the IP address of the NMM that sent a topology message.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.3
s3EnetTopNmmMacAddrmandatory MAC Address of the NMM this entry is for.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.4
s3EnetTopNmmChassisTypemandatory Concentrator type of the NMM this entry is for. The enumerated values of this object are the same as defined in the common MIB for object s3ChassisType.	SYNOPTICS-ROOT-MIBSnpxChassisType Type Values: 1 other 2 m3000 3 m3030 4 m2310 5 m2810 6 m2912 7 m2914 8 m271x 9 m2813 10 m2814 11 m2915 12 m5000 13 m2813SA 14 m2814SA 15 m810M 16 m1032x 17 m5005 18 mAlcatelEthConc 20 m2715SA 21 m2486 22 m28xxx 23 m2300x 24 m5DN00x 25 mBayStackEth 26 m2310x 27 mBayStack100Hub 28 m3000FastEth 29 mXediaSwitch 30 notUsed 31 m28200EthSwitch 32 mCent6Slot 33 mCent12Slot 34 mCent1Slot 35 mBayStack301 36 mBayStackTr 37 mFVC10625 38 mSwitchNode 39 mBayStack302 40 mBayStack350 41 mBayStack150 42 mCent50N3Slot 43 mCent50T3Slot 44 mBayStack303-304 45 mBayStack200 46 mBayStack250 48 mBayStack450 49 mBayStack410 50 mPassport1200 51 mPassport1250 52 mPassport1100 53 mPassport1150 54 mPassport1050 55 mPassport1051 56 mPassport8610 57 mPassport8606 58 mPassport8010 59 mPassport8006 60 mBayStack670 61 mPassport740 62 mPassport750 63 mPassport790 64 mBPS2000 65 mPassport8110 66 mPassport8106 67 mBayStack3580 68 mBayStack10 69 mBayStack420 70 mMetro1200ESM 71 mPassport8010co 72 mPassport8610co 73 mPassport8110co 74 mPassport8003 75 mPassport8603 76 mPassport8103 77 mBayStack380 78 mES470-48T 79 mMetro1450ESM 80 mMetro1400ESM 81 mAlteonSwitch 82 mES460-24T-PWR 83 mMetro8010 84 mMetro8010co 85 mMetro8006 86 mMetro8003 87 mAlteon180e 88 mAlteonAD3 89 mAlteon184 90 mAlteonAD4 91 mPassport1424 92 mPassport1648 93 mPassport1612 94 mPassport1624 95 mBayStack380-24F 96 mERS5510-24T 97 mERS5510-48T 98 mES470-24T 99 mWLANAccessPoint2220 100 mPassport2402 101 mAlteon2424 102 mAlteon2224 103 mAlteon2208 104 mAlteon2216 105 mAlteon3408 106 mAlteon3416 107 mWLANSecuritySwitch2250 108 mES425-48T 109 mES425-24T 110 mWLANAccessPoint2221 111 mMetroESU1800-24T 112 mMetroESU1800-24T-LX-DC 113 mPassport8310 114 mPassport8306 115 mERS5520-24T-PWR 116 mERS5520-48T-PWR 117 mNnVPNGw3050 118 mAlteonSSL310 119 mAlteonSSL310Fiber 120 mAlteonSSL310FIPS 121 mAlteonSSL410 122 mAlteonSSL410Fiber 123 mAlteonAS2424SSL 124 mES325-24T 125 mES325-24G 126 mWLANAccessPoint2225 127 mWLANSecuritySwitch2270 128 mES470-24T-PWR 129 mES470-48T-PWR 130 mERS5530-24TFD 131 mES3510-24T 132 mMetroESU1850-12G-AC 133 mMetroESU1850-12G-DC 134 mSnas4050 135 mNnVPNGw3070 136 mMetro3500 137 mBES1010-24T 138 mBES1010-48T 139 mBES1020-24T-PWR 140 mBES1020-48T-PWR 141 mBES2010-24T 142 mBES2010-48T 143 mBES2020-24T-PWR 144 mBES2020-48T-PWR 145 mBES110-24T 146 mBES110-48T 147 mBES120-24T-PWR 148 mBES120-48T-PWR 149 mBES210-24T 150 mBES210-48T 151 mBES220-24T-PWR 152 mBES220-48T-PWR 153 mOME6500 154 mERS4548GT 155 mERS4548GT-PWR 156 mERS4550T 157 mERS4550T-PWR 158 mERS4526FX 159 mERS2500-26T 160 mERS2500-26T-PWR 161 mERS2500-50T 162 mERS2500-50T-PWR 163 mERS4526T 164 mERS4526T-PWR 165 mERS4524GT 166 mERS4526GTX 167 mERS4526GTX-PWR 168 mMetroNext 169 mMERS4600 170 mESU1860T 171 mESU1880S 172 mERS5698TFD-PWR 173 mERS5698TFD 174 mERS5650TD-PWR 175 mERS5650TD 176 mERS5632FD 177 mVSS5000 178 mESU1860V 179 mESU1860S 180 mESU1860B 181 mMERS64000 182 mMERS8611c0 183 mMERS8603R 184 mERS4524GT-PWR 185 mERS6628XSGT 186 mERS6632XTS 187 mMESU2400 188 mWC8180 189 mVSP9012 190 mERS8603r 191 mERS8803r 192 mERS8806 193 mERS8810 194 mERS8810co 195 mERS4526T-PWR-PLUS 196 mERS4550T-PWR-PLUS 197 mERS4826GTS-PWR-PLUS 198 mERS4850GTS-PWR-PLUS 199 mERS4826GTS 200 mERS4850GTS 201 mVSP7024XLS 202 mERS3526T 203 mERS3526T-PWR-PLUS 204 mERS3524GT 205 mERS3524GT-PWR-PLUS 206 mERS3510GT 207 mERS3510GT-PWR-PLUS 208 mVSP4826GTS 209 mVSP4826GTS-PWR-PLUS 210 mVSP4850GTS 211 mVSP4850GTS-PWR-PLUS 212 mVSP9010 213 mVSP8284XSQ 214 mERS3549GTS 215 mERS3549GTS-PWR-PLUS 216 mVSP4450GSX-PWR-PLUS 217 mVSP7024XT 218 mERS5928GTS 219 mERS5928GTS-PWR-PLUS 220 mERS5952GTS 221 mERS5952GTS-PWR-PLUS 222 mERS5928GTS-UPWR 223 mERS59100GTS 224 mERS59100GTS-PWR-PLUS 225 mERS4926GTS 226 mERS4926GTS-PWR-PLUS 227 mERS4950GTS 228 mERS4950GTS-PWR-PLUS 229 mVSP4450GTXHT-PWR-PLUS 230 mVSP8404 231 mVSP7254XSQ 232 mVSP7254XTQ 233 mVSP4450GSX 234 mVSP9408 235 mCN3240 236 mERS3550T 237 mERS3550T-PWR-PLUS 238 mDSG8032 239 mDSG6248CFP 240 mDSG7648 241 mDSG7648C 242 mDSG7480 243 mDSG6248 244 mDSG6248P 245 mVSP8404C 246 mDSG9032 247 mDSG8064 248 mERS3626GTS 249 mERS3626GTS-PWR-PLUS 250 mERS3650GTS 251 mERS3650GTS-PWR-PLUS 252 mVSP8608 253 mERS5928MTS-UPWR 254 mDSGDPM624 255 mDSGDPM648 256 mVSP7432CQ 257 mVSP740048Y8C 258 mVSP1100 259 mVSP490024P 260 mVSP490048P 261 mXA1440 262 mXA1480 263 mVSP490024XE 264 mVSP490012MXU12XE 265 mVSP490024S 266 m552048TVOSS 267 m552048WVOSS 268 m552012MW36WVOSS 269 m552024TVOSS 270 m552024WVOSS 271 m552024XVOSS 272 m552048SEVOSS	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.5
s3EnetTopNmmBkplTypemandatory Concentrator backplane type of the NMM this entry is for. The enumerated values of this object are the same as defined in the common MIB for object s3ChassisBkplType.	SYNOPTICS-ROOT-MIBSnpxBackplaneType Type Values: 1 other 2 eth 3 ethTok 4 ethFddi 5 ethTokFddi 6 ethTokRed 7 ethTokFddiRed 8 tok 9 enetTrFastEnet 10 enetFastEnet 11 enetTrFastEnetRed 12 enetFastGigEnet	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.6
s3EnetTopNmmLocalSegmandatory Does this entry NMM exist in the same segment as this (the reporting) NMM.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.7
s3EnetTopNmmNumSeenmandatory Number of NMMs visible from the slot-port pair that this NMM is seen through.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.8
s3EnetTopNmmModuleTypemandatory The module type of the NMM that this entry is for. The values of this object are equivalent to those defined in the common MIB for object s3SlotModuleType.	SYNOPTICS-COMMON-MIBS3ModuleType Type Values: 1 empty 2 other 3 m3302 4 m3304-ST 5 m3305 6 m3308 7 m3313 8 m3313M 9 m3314-ST 10 m3314M-ST 11 m3323 12 m3324-ST 13 m3502 14 m3532 15 m3552 16 m3301 17 m3307 18 m3356 19 m3512 20 m3514 21 m3505 22 m3554 23 m3534 24 m3383 25 m3384 26 m331x 27 m351x 28 m3502-A 29 m3902 30 m3904 31 m3910S 32 m3386 33 m3394 34 m3395 35 m3323S 36 m3324S-ST 37 m3307A 38 m3308A 39 m3505A 40 m3513 41 m3333 42 m3334-ST 43 m3040 44 m3100R 45 notUsed45 46 notUsed46 47 m2810-hm 48 m2810-nmm 49 m3313S 50 m3314S 51 m3368 52 m3512S 53 m3513S 54 m3514S 55 m3522 56 m2912 57 m2914 58 notUsed58 59 m3301-75 60 m3301-93 61 m271x-nmm 62 m2705-hm 63 m2715-hm 64 m2813-nmm 65 m2814-nmm 66 m2813-hm 67 m2814-hm 68 m2803-hm 69 m2804-hm 70 m3395A 71 m3040S 72 m3502B 73 m3505B 74 m2715-F-hm 75 m2712-hm 76 m2712-F-hm 77 m2702-hm 78 m2702-C-hm 79 m2705-F-hm 80 m2702-F-hm 81 m2705-C-hm 82 m3902A 83 m2912A 84 m3313A 85 m3314A 86 m3307HD 87 m3328 88 m3904-2SM 89 m3910S-SM 90 m3800 91 m3910S-SD 92 m3904-4SM 93 m2915 94 m3910SA 95 m3910SA-SM 96 m3905 97 m2715B-hm 98 m2705B-hm 99 m2715B-F-hm 100 m2712B-hm 101 m2712B-F-hm 102 m2702B-C-hm 103 m3304A 104 m3486 105 m3308B 106 m2813SA-nmm 107 m2814SA-nmm 108 m3517SA 109 m810M 110 m3313SA 111 m3314SA 112 m3522A 113 m3504-ST 114 m3513SA 115 mAlcatel-Eth-nmm 116 mAlcatel-Eth-hm1 117 mAlcatel-Eth-hm 118 m2486-nmm 119 m2486-hm 120 m3174 121 m271xSA-nmm 122 m3299C 123 m3299U 124 m3299F 125 m2300x 126 m2310x 127 m3410 128 m3405 129 m3475	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.9
s3EnetTopNmmNumLinksmandatory Number of links through which NMMs are visible on this NMM.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.10
s3EnetTopNmmChgStatusmandatory If this NMM has detected any change of topology relative to itself it will set this object to change(1), otherwise noChange(2) will be returned.	Enumeration Enumerated Values: 1 changed 2 noChange	.1.3.6.1.4.1.45.1.3.2.6.1.1.1.11

Encoded octet string of the s3EnetTopNmmTable.

s3EnetTopNmmSubsetEntry row .1.3.6.1.4.1.45.1.3.2.6.1.3.1

Encoded octet string of the s3EnetTopNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the instance returned.
On GET-NEXTs: instance returned is the instance of
the last record contain…

Indexes

s3EnetTopNmmSlot s3EnetTopNmmPort s3EnetTopNmmIpAddr

Column	Syntax	OID
s3EnetTopNmmSubsetmandatory Encoded octet string. On reads it contains an integral number of s3EnetTopNmmEntry records. All entries are the same size. Values are specified in SynOptics technical documents.	OctetString Constraints: range: 0-1400	.1.3.6.1.4.1.45.1.3.2.6.1.3.1.1

A table of Bridges that are in the same segment as
this NMM network.

s3EnetTopBridgeEntry row .1.3.6.1.4.1.45.1.3.2.6.2.1.1

Table that contains information about Bridges that
are in the same segment as this NMM.

Indexes

s3EnetTopBridgeIpAddr

Column	Syntax	OID
s3EnetTopBridgeIpAddrmandatory IP address of the bridge from the Hello PDU.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.1
s3EnetTopBridgeNumbermandatory Bridge Number assigned to this bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.2
s3EnetTopBridgeMacAddrmandatory MAC Address of this bridge.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.3
s3EnetTopBridgeTypemandatory Kind of bridge this entry represents.	Enumeration Enumerated Values: 1 other 2 localSyn2Port 3 remoteSyn3Port 4 etherSwitch	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.4
s3EnetTopBridgeStatusmandatory Current operational status of this bridge.	Enumeration Enumerated Values: 1 other 2 active 3 standby	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.5
s3EnetTopBridgeSlotNummandatory Slot on the concentrator that the Hello PDU from the bridge was received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.6
s3EnetTopBridgePortNummandatory Port on concentrator that the Hello PDU from the bridge was received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.7
s3EnetTopBridgeModuleTypemandatory Module type of the board that the Hello PDU from the Bridge was received.	SYNOPTICS-COMMON-MIBS3ModuleType Type Values: 1 empty 2 other 3 m3302 4 m3304-ST 5 m3305 6 m3308 7 m3313 8 m3313M 9 m3314-ST 10 m3314M-ST 11 m3323 12 m3324-ST 13 m3502 14 m3532 15 m3552 16 m3301 17 m3307 18 m3356 19 m3512 20 m3514 21 m3505 22 m3554 23 m3534 24 m3383 25 m3384 26 m331x 27 m351x 28 m3502-A 29 m3902 30 m3904 31 m3910S 32 m3386 33 m3394 34 m3395 35 m3323S 36 m3324S-ST 37 m3307A 38 m3308A 39 m3505A 40 m3513 41 m3333 42 m3334-ST 43 m3040 44 m3100R 45 notUsed45 46 notUsed46 47 m2810-hm 48 m2810-nmm 49 m3313S 50 m3314S 51 m3368 52 m3512S 53 m3513S 54 m3514S 55 m3522 56 m2912 57 m2914 58 notUsed58 59 m3301-75 60 m3301-93 61 m271x-nmm 62 m2705-hm 63 m2715-hm 64 m2813-nmm 65 m2814-nmm 66 m2813-hm 67 m2814-hm 68 m2803-hm 69 m2804-hm 70 m3395A 71 m3040S 72 m3502B 73 m3505B 74 m2715-F-hm 75 m2712-hm 76 m2712-F-hm 77 m2702-hm 78 m2702-C-hm 79 m2705-F-hm 80 m2702-F-hm 81 m2705-C-hm 82 m3902A 83 m2912A 84 m3313A 85 m3314A 86 m3307HD 87 m3328 88 m3904-2SM 89 m3910S-SM 90 m3800 91 m3910S-SD 92 m3904-4SM 93 m2915 94 m3910SA 95 m3910SA-SM 96 m3905 97 m2715B-hm 98 m2705B-hm 99 m2715B-F-hm 100 m2712B-hm 101 m2712B-F-hm 102 m2702B-C-hm 103 m3304A 104 m3486 105 m3308B 106 m2813SA-nmm 107 m2814SA-nmm 108 m3517SA 109 m810M 110 m3313SA 111 m3314SA 112 m3522A 113 m3504-ST 114 m3513SA 115 mAlcatel-Eth-nmm 116 mAlcatel-Eth-hm1 117 mAlcatel-Eth-hm 118 m2486-nmm 119 m2486-hm 120 m3174 121 m271xSA-nmm 122 m3299C 123 m3299U 124 m3299F 125 m2300x 126 m2310x 127 m3410 128 m3405 129 m3475	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.8
s3EnetTopBridgeHelloPortNummandatory Port Number on the Bridge from which the Hello PDU was sent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.9
s3EnetTopBridgeHelloPortTypemandatory Type of the Port on the Bridge from which the Hello PDU was sent.	Enumeration Enumerated Values: 1 other 2 ether 3 tokenRing4 4 tokenRing16 5 fddi 6 t1	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.10
s3EnetTopBridgeHelloPortStatusmandatory Status of the Port on the Bridge from which the Hello PDU was sent.	Enumeration Enumerated Values: 1 other 2 active 3 standby	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.11
s3EnetTopBridgeCompBridgeMac1mandatory Contains one of the 2 companion MAC addresses of the remote bridge. If this entry is for a local bridge or is unknown, then this object should contain the MAC address of 0:0:0:0:0:0.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.12
s3EnetTopBridgeCompBridgeMac2mandatory Contains one of the 2 companion MAC addresses of the remote bridge. If this entry is for a local bridge or is unknown, then this object should contain the MAC address of 0:0:0:0:0:0.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.6.2.1.1.13

Encoded octet string of the s3EnetTopBridgeTable.

s3EnetTopBdgSubsetEntry row .1.3.6.1.4.1.45.1.3.2.6.2.2.1

Encoded octet string of the s3EnetTopBridgeTable.
Instance returned in Response PDU:
On GETs: instance specified is the instance returned.
On GET-NEXTs: instance returned is the instance
of the last record cont…

Indexes

s3EnetTopBridgeIpAddr

Column	Syntax	OID
s3EnetTopBdgSubsetmandatory Encoded octet string. On reads it contains an integral number of s3EnetTopBridgeEntry records. All entries are the same size. Values are specified in SynOptics technical documents.	OctetString Constraints: range: 0-1400	.1.3.6.1.4.1.45.1.3.2.6.2.2.1.1

The table of thresholds.
          
There are three kinds of thresholds supported
in the threshold table: port thresholds, slot
thresholds, and concentrator thresholds.  The
object s3EnetThreshObject in the threshold table
is used to specify the kind of threshold for the
table entry.
          
When the value of the object s3EnetThreshObject
is port(4), the threshold entry applies to a
specific port, which is identified by the value
of the objects s3EnetThreshSlot and
s3EnetThreshPort.  The port must be on the same
segment as the NMM in order for the NMM to
monitor the threshold.
          
When the value of the object s3EnetThreshObject
is slot(3), the threshold entry applies to a
specific slot, which is identified by the value
of the object s3EnetThreshSlot.  The slot must
be on the same segment as the NMM in order for
the NMM to monitor the threshold.
          
When the value of the object s3EnetThreshObject
is concentrator(2), the threshold entry applies
to the segment the NMM is connected to within
the concentrator.

s3EnetThreshEntry row .1.3.6.1.4.1.45.1.3.2.8.1.1

A row in the Ethernet Threshold Table.

The following columns must be specified in a
SNMP SET request to create a row in the table
for each of the three kinds of thresholds (each
name is prefixed by s3EnetTh…

Indexes

s3EnetThreshIndex

Column	Syntax	OID
s3EnetThreshIndexmandatory The index into the threshold table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.8.1.1.1
s3EnetThreshStatusmandatory The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created as long as the oth…	Enumerationr/w Enumerated Values: 1 addActive 2 delDead	.1.3.6.1.4.1.45.1.3.2.8.1.1.2
s3EnetThreshObjectmandatory Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (error) concentrator(2)...The threshold applies to the …	Enumerationr/w Enumerated Values: 1 other 2 concentrator 3 slot 4 port	.1.3.6.1.4.1.45.1.3.2.8.1.1.3
s3EnetThreshSlotmandatory If s3EnetThreshObject is slot(3) or port(4), then this contains a valid slot. Otherwise, the contents of this object is meaningless.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.8.1.1.4
s3EnetThreshPortmandatory If s3EnetThreshObject is port(4), then this contains a valid port. Otherwise, the contents of this object is meaningless.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.8.1.1.5
s3EnetThreshTypemandatory Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Applicable to ALL Thresholds ============================================== …	Enumerationr/w Enumerated Values: 1 other 2 goodBytes 3 goodPkts 4 badPkts 5 crcPkts 6 misaligned 7 runtPkts 8 fragPkts 9 tooLong 10 collision 11 lateColls 12 linkStatus 13 multicast 14 broadcast 15 shortEvents 16 srcAddrChanges 17 dataRateMismatches 18 networkErrors 19 badToGoodPktRatio 20 netErrToGoodPktRatio 21 colltoGoodPktRatio 22 collBackOffErr	.1.3.6.1.4.1.45.1.3.2.8.1.1.6
s3EnetThreshConditionmandatory Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value of s3EnetThreshActualValue cros…	Enumerationr/w Enumerated Values: 1 other 2 crossValue 3 overValue 4 overRate 5 linkOn 6 linkOff 7 overRatio	.1.3.6.1.4.1.45.1.3.2.8.1.1.7
s3EnetThreshSetValuemandatory Threshold setting value.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.8.1.1.8
s3EnetThreshActualValuemandatory Current value of the threshold counter. This object is set to zero at the begining of each duration window.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.8.1.1.9
s3EnetThreshActionmandatory Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are listed below. Applicable to ALL Thresholds ================================…	Enumerationr/w Enumerated Values: 1 other 2 noAction 3 sendTrap 4 res4 5 res5 6 partSlot 7 partSlotPort 8 res8 9 res9 10 trapPartSlot 11 trapPartSlotPort	.1.3.6.1.4.1.45.1.3.2.8.1.1.10
s3EnetThreshExceedCountmandatory Counter for how many times the selected threshold has reached its setting value.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.8.1.1.11
s3EnetThreshDurationmandatory Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window is broken down into 5 second sampling periods for purposes of checking the threshold condi…	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.8.1.1.12

This table contains a list of entries which provide
SA-DA traffic information.  Specifically  frame and
byte counter values are provided per unique SA-DA
pair.  The indexing scheme of this table allows an
SA list to be retrieved using GETNEXT.  An SA list
is a list of entries that have a common SA, however,
different DAs.

s3EnetSdTrafEntry row .1.3.6.1.4.1.45.1.3.2.9.1.1

An entry in the SA-DA traffic table.

Indexes

s3EnetSdTrafMacSA s3EnetSdTrafMacDA

Column	Syntax	OID
s3EnetSdTrafMacSAobsolete Source MAC address.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.9.1.1.1
s3EnetSdTrafMacDAobsolete Destination MAC address.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.9.1.1.2
s3EnetSdTrafFramesobsolete The number of good frames received by the concentrator for a SA-DA pair.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.9.1.1.3
s3EnetSdTrafBytesobsolete The number of bytes in good frames received by the concentrator for a SA-DA pair.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.9.1.1.4

This table contains a list of entries which provide
DA-SA traffic information.  Specifically frame and
byte counter values are provided per unique DA-SA
pair.  The indexing scheme of this table allows a
DA list to be retrieved using GETNEXT.  A DA list
is a list of entries that have a common DA, however,
different SAs.

s3EnetDsTrafEntry row .1.3.6.1.4.1.45.1.3.2.9.2.1

An entry in the DA-SA table.

Indexes

s3EnetDsTrafMacDA s3EnetDsTrafMacSA

Column	Syntax	OID
s3EnetDsTrafMacDAobsolete Destination MAC address.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.9.2.1.1
s3EnetDsTrafMacSAobsolete Source MAC address.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.9.2.1.2
s3EnetDsTrafFramesobsolete The number of good frames received by the concentrator for a DA-SA pair.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.9.2.1.3
s3EnetDsTrafBytesobsolete The number of bytes in good frames received by the concentrator for a DA-SA pair.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.9.2.1.4

This table contains a list of entries for the 'paged'
Traffic Matrix table.

s3EnetPagedTrafEntry row .1.3.6.1.4.1.45.1.3.2.9.3.1

A 'paged' entry in the Traffic Matrix table.

Indexes

s3EnetTrafPageNo

Column	Syntax	OID
s3EnetTrafPageNoobsolete A specific page in the Traffic Matrix table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.9.3.1.1
s3EnetTrafPageEntriesobsolete This OCTET STRING contains up to 20 valid Traffic Matrix table entries. The entries will not be in any logical order. Each entry consists of a 20-byte octet string including a 6-byte source MAC address, a 6-byte destina…	OctetString Constraints: range: 1-400	.1.3.6.1.4.1.45.1.3.2.9.3.1.2

This table provides a list of entries, each entry
providing information related to frame MAC level
error conditions per port. This table is conceptually
an extension to the s3EnetPortTable and is
only implemented by the 3313S and 3314S NMMs.

s3EnetPlusPortEntry row .1.3.6.1.4.1.45.1.3.2.10.1.1

An entry in the Plus Port table.

Indexes

s3EnetPlusPortBoardIndex s3EnetPlusPortIndex

Column	Syntax	OID
s3EnetPlusPortBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.10.1.1.1
s3EnetPlusPortIndexmandatory A unique value for each port. Its value typically ranges between 1 and 12.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.10.1.1.2
s3EnetPortFragmentsmandatory This contains a count of fragments received by the board between 80-512 bits (64 bytes), inclusively, with invalid FCS or alignment errors. (These commonly represent collision fragments, and are not errors. Collision …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.3
s3EnetPortShortEventsmandatory This contains a count of fragments received by the port shorter than 80 bits.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.4
s3EnetPortAutoPartitionsmandatory This contains a count of times the ports on the board have autopartitioned due to excessive collisions (more than 32 consecutive collisions). This count is an approximation and may be less than the total count.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.5
s3EnetPortRateMismatchesmandatory This contains a count of the occurrences of out of spec bit rates. This indicates the number of times FIFO buffer over-runs or underruns due to transmission rate errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.6
s3EnetPortJabbersmandatory This contains a count of the times that MAU jabber lockup protection (MJLP) was invoked because transmission of data from this port exceeded 5 msec in duration. This information can be useful in identifying faulty stati…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.7
s3EnetPortLastSrcAddrmandatory This is the source address of the last packet received through this port.	RFC1213-MIBPhysAddress Constraints: range: 6-6	.1.3.6.1.4.1.45.1.3.2.10.1.1.8
s3EnetPortSrcAddrChangesmandatory This is the number of times that the s3EnetPortLastSrcAddr object for this has changed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.1.1.9

This table provides a list of entries, each entry
providing information related to frame MAC level
error conditions per board.  This table is conceptually
an extension to the s3EnetboardTable and is
only implemented by the 3313S and 3314S NMMs.

s3EnetPlusBoardEntry row .1.3.6.1.4.1.45.1.3.2.10.2.1

An entry in the Plus Board table.

Indexes

s3EnetPlusBoardIndex

Column	Syntax	OID
s3EnetPlusBoardIndexmandatory The board number part of an index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.10.2.1.1
s3EnetBoardFragmentsmandatory This contains a count of fragments received by the board between 80-512 bits (64 bytes), inclusively, with invalid FCS or alignment errors. (These commonly represent collision fragments, and are not errors. Collision …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.2.1.2
s3EnetBoardShortEventsmandatory This contains a count of fragments received by the board shorter than 80 bits.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.2.1.3
s3EnetBoardAutoPartitionsmandatory This contains a count of times the ports on this board have been autopartitioned due to excessive collisions (more than 32 consecutive collisions). This count is an approximation and may be less than the total count.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.2.1.4
s3EnetBoardRateMismatchesmandatory This contains a count of the occurrences of out of spec bit rates. This indicates the number of times FIFO buffer over-runs or underruns due to transmission rate errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.2.1.5
s3EnetBoardJabbersmandatory This contains a count of the times that MAU jabber lockup protection (MJLP) was invoked because transmission of data from a port on this board exceeded 5 msec in duration. This information can be useful in identifying …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.10.2.1.6

This table provides a list of entries, each entry
providing information related to frame sizes of
packets received on a port.  The variables
defined for the entries are only supported
by 3313S and 3314S NMM.

s3EnetFrSizePortEntry row .1.3.6.1.4.1.45.1.3.2.11.1.1

An entry in the FrSize Port table.

Indexes

s3EnetFrSizePortBoardIndex s3EnetFrSizePortIndex

Column	Syntax	OID
s3EnetFrSizePortBoardIndexmandatory A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.11.1.1.1
s3EnetFrSizePortIndexmandatory A unique value for each port. Its value typically ranges between 1 and 12.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.3.2.11.1.1.2
s3EnetFrSizePort64to127mandatory This contains a count of frames received by the port that are in the range of 64 octets to 127 octets, inclusive.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.11.1.1.3
s3EnetFrSizePort128to255mandatory This contains a count of frames received by the port that are in the range of 128 octets to 255 octets, inclusive.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.11.1.1.4
s3EnetFrSizePort256to511mandatory This contains a count of frames received by the port that are in the range of 256 octets to 511 octets, inclusive.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.11.1.1.5
s3EnetFrSizePort512to1023mandatory This contains a count of frames received by the port that are in the range of 512 octets to 1023 octets, inclusive.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.11.1.1.6
s3EnetFrSizePort1024to1518mandatory This contains a count of frames received by the port that are in the range of 1024 octets to 1518 octets, inclusive.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.3.2.11.1.1.7