SWL3MGMT-MIB Table View

This table contain IP interface information.

swL3IpCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1

A list of information about a specific IP interface.

Indexes

swL3IpCtrlInterfaceName

Column	Syntax	OID
swL3IpCtrlInterfaceName This object indicates the name of the IP interface.	SNMPv2-TCDisplayString Constraints: range: 0-12 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.1
swL3IpCtrlIfIndex This object uniquely identifies the IP interface number in the swL3IpCtrlTable.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.2
swL3IpCtrlIpAddr The IP address of the interface. This object only can take the value of the unicast IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.3
swL3IpCtrlIpSubnetMask The IP net mask for this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.4
swL3IpCtrlVlanName This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.5
swL3IpCtrlMode This object indicates the IP operation mode. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual(2)…	Enumerationr/w Enumerated Values: 1 other 2 manual 3 bootp 4 dhcp	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.6
swL3IpCtrlState This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.7
swL3IpCtrlOperState The current operational state of the IP interface.	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.2272.1.201.1.3.2.1.1.1.8

A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets.

swL3IpFdbInfoEntry row .1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1

Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.

Indexes

swL3IpFdbInfoIpAddr

Column	Syntax	OID
swL3IpFdbInfoIpAddr A IP address for which switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask A IP net mask for this interface.for which switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.2
swL3IpFdbInfoPort Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port nu…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.3
swL3IpFdbInfoType The status of this entry.	Enumeration Enumerated Values: 1 other 2 static 3 dynamic	.1.3.6.1.4.1.2272.1.201.1.3.2.2.1.1.4

This table defines information for the device to filter packets
with specific IP address (either as the DA and/or as the SA). 
The IP address can be a unicast address or multicast address. 
This table has higher priority than both static FDB table and 
IGMP table. It means that if a IP address appears on this table
also appears on the static FDB table, the device will use the
information provide by this table to process the packet.

swL3IpFilterAddrCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1

A list of information about a specific unicast/multicast IP
address for which the switch has filtering information.

Indexes

swL3IpFilterAddrIpAddr

Column	Syntax	OID
swL3IpFilterAddrIpAddr This object indicates a unicast/multicast IP address for which the switch has filtering information. But if the swL3IpFilterAddrCtrlState = src-addr, then the object can not be a multicast IP address (Class D IP addres…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.1
swL3IpFilterAddrCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. dst-ad…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr 5 invalid	.1.3.6.1.4.1.2272.1.201.1.3.2.3.1.3.1.2

This entity's IP static Routing table.

swL3IpStaticRouteEntry row .1.3.6.1.4.1.2272.1.201.1.3.2.5.1

A particular route to a particular destination, under a particular policy.

Indexes

swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteNextHop

Column	Syntax	OID
swL3IpStaticRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.5.1.1
swL3IpStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.5.1.2
swL3IpStaticRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.5.1.3
swL3IpStaticRouteMetric The routing metric for this route.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.3.2.5.1.4
swL3IpStaticRouteStatus This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.3.2.5.1.5

The ARP table used for mapping from IP addresses to physical 
addresses.

swL3IpArpEntry row .1.3.6.1.4.1.2272.1.201.1.3.2.6.1

Each entry contains one IpAddress to `physical' address
equivalence.

Indexes

swL3IpArpIfIndex swL3IpArpNetAddress

Column	Syntax	OID
swL3IpArpIfIndex The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.201.1.3.2.6.1.1
swL3IpArpNetAddress The IpAddress corresponding to the media-dependent `physical' address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.2.6.1.2
swL3IpArpPhysAddress The media-dependent `physical' address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.201.1.3.2.6.1.3
swL3IpArpType The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the swL3IpArpTable. That is, it effectively dissasociates the interface identifie…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 dynamic 4 static 5 local 6 local-broadcast	.1.3.6.1.4.1.2272.1.201.1.3.2.6.1.4
swL3IpArpDynamicAgingTime The timeout period in seconds for aging out dynamically learned arp information. If the swL3IpArpType is not dynamic(3), this object will display zero.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.3.2.6.1.5

This table specifys the IP address as a destination to forward
(relay) BOOTP packets to.

swL3RelayBootpCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1

A list of information specifies the IP address as a destination
to forward (relay) BOOTP packets to.

Indexes

swL3RelayBootpCtrlInterfaceName swL3RelayBootpCtrlServer

Column	Syntax	OID
swL3RelayBootpCtrlInterfaceName The name of the IP interface.	SNMPv2-TCDisplayString Constraints: range: 0-12 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.1
swL3RelayBootpCtrlServer The BOOTP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.2
swL3RelayBootpCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.3.3.1.4.1.3

This table display the current DNS relay static table.

swL3RelayDnsCtrlEntry row .1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1

A list of information display the current DNS relay static
table.

Indexes

swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr

Column	Syntax	OID
swL3RelayDnsCtrlDomainName The domain name of the entry.	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr The IP address of the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.2
swL3RelayDnsCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.3.3.2.6.1.3

This table display the current MD5 key table.

swL3Md5Entry row .1.3.6.1.4.1.2272.1.201.1.3.4.1

A list of information display the current MD5 key table.

Indexes

swL3Md5KeyId

Column	Syntax	OID
swL3Md5KeyId The MD5 key ID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.201.1.3.4.1.1
swL3Md5Key An MD5 password of up to 16 bytes.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.201.1.3.4.1.2
swL3Md5State This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.3.4.1.3

Route redistribution allows routers on the network. That are 
running different routing protocols to exchange routing 
information. This is accomplished by comparing the routes stored
in the vairous router??s routing tables and assinging appropriate
metrics. This information is then exchanged among the various 
routers according to the individual routers current routing 
protocol.

swL3RouteRedistriEntry row .1.3.6.1.4.1.2272.1.201.1.3.5.1

A list of information display the route redistribution table.

Indexes

swL3RouteRedistriSrcProtocol swL3RouteRedistriDstProtocol

Column	Syntax	OID
swL3RouteRedistriSrcProtocol Allows the selection of the protocol of the source device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf 4 static 5 local	.1.3.6.1.4.1.2272.1.201.1.3.5.1.1
swL3RouteRedistriDstProtocol Allows the selection of the protocol of the destination device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf	.1.3.6.1.4.1.2272.1.201.1.3.5.1.2
swL3RouteRedistriType Allows the selection of one of the methods for calcalculating the metric value.	Enumerationr/w Enumerated Values: 1 other 2 all 3 type-1 4 type-2 5 internal 6 external 7 inter-E1 8 inter-E2 9 extType1 10 extType2	.1.3.6.1.4.1.2272.1.201.1.3.5.1.3
swL3RouteRedistriMetric Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.	Integer32r/w Constraints: range: 0-16777214	.1.3.6.1.4.1.2272.1.201.1.3.5.1.4
swL3RouteRedistriState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.2272.1.201.1.3.5.1.5

The list of Hosts, and their metrics, that the router will 
advertise as host routes.

swL3OspfHostEntry row .1.3.6.1.4.1.2272.1.201.1.3.6.1

A metric to be advertised, for a given type of service, when a
given host is reachable.

Indexes

swL3OspfHostIpAddress swL3OspfHostTOS

Column	Syntax	OID
swL3OspfHostIpAddress The IP Address of the Host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.6.1.1
swL3OspfHostTOS The Type of Service of the route being configured.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.2272.1.201.1.3.6.1.2
swL3OspfHostMetric The Metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.2272.1.201.1.3.6.1.3
swL3OspfHostStatus This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.201.1.3.6.1.4
swL3OspfHostAreaID The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.2272.1.201.1.3.6.1.5

Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'swL3VrrpOperEntry' items.

swL3VrrpOperEntry row .1.3.6.1.4.1.2272.1.201.1.3.7.1.1

An entry in the swL3VrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.

Indexes

IF-MIBifIndex swL3VrrpOperVrId

Column	Syntax	OID
swL3VrrpOperVrId This object contains the Virtual Router Identifier (VRID).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.201.1.3.7.1.1.1
swL3VrrpOperCriticalIpAddr To make sure the ip interface connected by this virtual router is alive or not.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.201.1.3.7.1.1.2
swL3VrrpOperCriticalIpState To enable or disable the feature of critical IP.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.2272.1.201.1.3.7.1.1.3
swL3VrrpOperHoldDownTimer When VRRP is started, it need to spend this period of time to let the routing would be leared as well. The unit of this object is second.	Integer32r/w Constraints: range: 0-21600	.1.3.6.1.4.1.2272.1.201.1.3.7.1.1.4

IP Route Pref table.

swL3RoutePrefEntry row .1.3.6.1.4.1.2272.1.201.1.3.8.1

An entry of Ip Route Pref Table.

Indexes

swL3RoutePrefProtocol

Column	Syntax	OID
swL3RoutePrefProtocol Protocol	Enumeration Enumerated Values: 1 isis 2 rip 3 ospfIntra 4 static 5 local 6 bgp 7 staticLow 8 ospfInter 9 ospfExternal 10 ospfExternal1 11 ospfExternal2 12 ospfNssa1 13 ospfNssa2	.1.3.6.1.4.1.2272.1.201.1.3.8.1.1
swL3RoutePrefValue This value is a preference value for the given protocol.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.2272.1.201.1.3.8.1.2

The (conceptual) table listing the router's multicast-
capable interfaces.

swL3DvmrpInterfaceEntry row .1.3.6.1.4.1.2272.1.201.1.3.9.1

An entry (conceptual row) in the swL3DvmrpInterfaceTable.

Indexes

swL3DvmrpInterfaceIfIndex

Column	Syntax	OID
swL3DvmrpInterfaceIfIndex The ifIndex value of the interface for which DVMRP is enabled.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.201.1.3.9.1.1
swL3DvmrpInterfaceNeighborTimeout The time period for DVMRP will hold Neithbor Router reports before issuing poison route messages. The unit is second.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.3.9.1.2
swL3DvmrpInterfaceProbe DVMRP defines an extension to IGMP that allows routers to query other routers to determine if a multicast group is present on an given router subnetwork or not. This is referred to as a 'probe'. The unit is second.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.201.1.3.9.1.3