SWITCH-PORTBACKUP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
7
.1.3.6.1.4.1.8886.6.1.40.1.1
·
1 row entry
·
7 columns
Uses the raisecom variant from
Command help
/opt/observium/mibs/raisecom.
Walk rcPortBackupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-PORTBACKUP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-PORTBACKUP-MIB::rcPortBackupTable'
A table of port backup group
An entry in the rcPortBackupTable provides objects .
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
rcPortBackupPrimaryPortIndexmandatory
This object is the first index of an rcPortBackupTable.
It is the primary port of a backup group. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.8886.6.1.40.1.1.1.1 |
||||||||||||
|
rcPortBackupStandbyPortmandatory
This object is the second index of an rcPortBackupTable.
It is the standby port of a backup group. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.8886.6.1.40.1.1.1.2 |
||||||||||||
|
rcPortBackupVlanlistmandatory
Backup vlan list.Within each octet, the most significant
bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan is represented by a single bit wi… |
SWITCH-TCVlanset Type Constraints: range: 512 |
.1.3.6.1.4.1.8886.6.1.40.1.1.1.3 |
||||||||||||
|
rcPortBackupPrimaryPortForwardStatemandatory
Primary port status??including two states: discarding and
forwarding. If a primary port is at discarding state, the port only reiceive and send BPDU;If a primary port is at forwarding state,the port reiceive and sen… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8886.6.1.40.1.1.1.4 |
||||||||||||
|
rcPortBackupStandbyPortForwardStatemandatory
Standby port status??including two states: discarding and
forwarding. If a standby port is at discarding state, the port only reiceive and send BPDU;If a standby port is at forwarding state,the port reiceive and sen… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8886.6.1.40.1.1.1.5 |
||||||||||||
|
rcPortBackupSwitchCountmandatory
The count of switch between primary port and standby port.
|
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.8886.6.1.40.1.1.1.6 |
||||||||||||
|
rcPortBackupRowStatusmandatory
This object allows entries to be created and deleted
in the rcPortBackupTable. Deletion of an entry in this table results in a deletion of all corresponding (same rcPortBackupPrimaryPortIndex and rcPortBackupStandbyPort… |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.8886.6.1.40.1.1.1.7 |
