SWITCH-MSTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
55

rcMstpPortTable

table
.1.3.6.1.4.1.8886.6.1.24.3 · 1 row entry · 20 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpPortTable' 
Mstp port table
rcMstpPortEntry row .1.3.6.1.4.1.8886.6.1.24.3.1
Entry of mstp port table
Indexes
Column Syntax OID
rcMstpPortIndex
A unique value, greater than zero, for each Port. The value for
each interface sub-layer must remain constant at least from one
re-initialization of the entity's network management system to
the next re-initializatio…
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.6.1.24.3.1.1
rcMstpPortAdminMACEnable
The enabled/disabled status of the port.
Set TRUE(1) ,the stp status of the port will be enabled,
otherwise it will be disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.2
rcMstpPortOperMACEnable
The enabled/disabled status of the port.
The value of TRUE(1) means the stp status of the port is
enabled, otherwise it is disabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.3
rcMstpPortAdminEdgePort
The administrative edged port status of this port.
A value of forceTrue(0) indicates that this port should
always be treated as edged port.
A value of forceFalse(1) indicates that this port should
not be treated a…
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
2auto
 .1.3.6.1.4.1.8886.6.1.24.3.1.4
rcMstpPortAdminStp
Ports with this object set as false(2) do not participate in
any STP computation; they are always in Forwarding state, do not
send any BPDU and all BPDUs received on these Ports will be discarded.
Such ports are used…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.5
rcMstpPortOperStp
port mstp enable operate status
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.24.3.1.6
rcMstpPortRootGuard
port mstp rootport protect enable status
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.24.3.1.7
rcMstpPortRxTcnBpduCounter
Received Topology Change Notification (TCN) Messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.8
rcMstpPortRxCfgBpduCounter
Received Configuration BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.9
rcMstpPortRxRstBpduCounter
Received RST BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.10
rcMstpPortRxMstBpduCounter
Received MST BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.11
rcMstpPortTxTcnBpduCounter
Transmitted Topology Change Notification (TCN) Messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.12
rcMstpPortTxCfgBpduCounter
Transmitted Configuration BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.13
rcMstpPortTxRstBpduCounter
Transmitted RST BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.14
rcMstpPortTxMstBpduCounter
Transmitted MST BPDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.3.1.15
rcMstpPortStatisticsClear
Clear port statistics.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.16
rcMstpPortLoopGuard
Port mstp loop protect enable status. If a port in some instance did not
received any bpdu in three times of hello-time, it will age and reselect.
If there was no link fault in the tree but other reason lead to bpdu lo…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.24.3.1.17
rcMstpBpduFilterEnable
Bpdu filter status on edge port, when it is enabled,the edge port drop the received bpdu packets,
and does not send any bpdu packet.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.18
rcMstpPortBpduGuardEnable
Bpdu guard enable status on edge port. If enabled, port will shutdown when it receive
stp bpdu packet
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.3.1.19
rcMstpPortBpduGuardStatus
Indicate whether the port was shutdown due to bpdu guard，set it
to no will up the port.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8886.6.1.24.3.1.20

rcMstpXstInstanceTable

table
.1.3.6.1.4.1.8886.6.1.24.4 · 1 row entry · 2 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstInstanceTable' 
Mstp Instance vlan table
rcMstpXstInstanceEntry row .1.3.6.1.4.1.8886.6.1.24.4.1
Entry of mstp Instance vlan table
Indexes
Column Syntax OID
rcMstpXstInstanceId
A unique value identifies an instance. The entry of this
table with index 0 always represents the CIST instance.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.4.1.1
rcMstpXstInstanceVlansMapped
Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlan 1 through 8,
the second octet specifying vlan 9 through 16, etc.
Within each octet, the most significant bit represent…
SWITCH-TCVlanset
Type Constraints:
range: 512
 .1.3.6.1.4.1.8886.6.1.24.4.1.2

rcMstpXstInstanceEditTable

table
.1.3.6.1.4.1.8886.6.1.24.5 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstInstanceEditTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstInstanceEditTable' 
Mstp Instance vlan edit table
rcMstpXstInstanceEditEntry row .1.3.6.1.4.1.8886.6.1.24.5.1
Mstp Instance vlan edit table
Indexes
Column Syntax OID
rcMstpXstInstanceEditId
The MST instance ID, the value of which is in the range
from 0 to 4095. The instances of this table entry with
rcMstpXstInstanceEditId of zero is automatically created
by the device and can not modified.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.5.1.1
rcMstpXstInstanceEditVlansMap
Each octet within this value specifies a set of eight vlans,
with the first octet specifying vlan 1 through 8, the second
octet specifying vlan 9 through 16, etc. Within each octet,
the most significant bit represent…
SWITCH-TCVlansetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.8886.6.1.24.5.1.2
rcMstpXstInstanceEditRowStatus
This object controls the creation and deletion of a row in
rcMstpXstInstanceEditTable.
When creating an entry in this table, 'createAndGo' method
is used and the value of this object is set to 'active'.
Deactivation …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.24.5.1.3

rcMstpXstTable

table
.1.3.6.1.4.1.8886.6.1.24.6 · 1 row entry · 9 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstTable' 
Mstp Instance table
rcMstpXstEntry row .1.3.6.1.4.1.8886.6.1.24.6.1
Entry of mstp Instance table
Indexes
Column Syntax OID
rcMstpXstId
The MST instance ID, the value of which is in the range
from 0 to 4095. The instances of this table entry with
rcMstpXstId of zero is automatically created by the
device and can not modified.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.6.1.1
rcMstpXstBridgeId
Bridge ID of the corresponding Spanning Tree instance.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.8886.6.1.24.6.1.2
rcMstpXstDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as
the Root in the Configuration BPDUs transmitted by the
Designated Bridge for the segment to which the port is
attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.8886.6.1.24.6.1.3
rcMstpXstInternalRootCost
The cost of the path to the root of the corresponding
Spanning Tree instance as seen from this bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.24.6.1.4
rcMstpXstRootPort
The port number of the port which offers the lowest
cost path from this bridge to the root bridge for
the corresponding Spanning Tree instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.6.1.5
rcMstpXstMasterPort
Master port of the corresponding Spanning Tree instance.
0 for CIST.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.6.1.6
rcMstpXstTimeSinceTopologyChange
The elapsed time, in units of hundredths of a second,
since the last time a topology change was detected by
the corresponding Spanning Tree instance (specifically,
the elapsed time since the tcWhile timer for any por…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.6.1.7
rcMstpXstTopologyChangesCount
The total number of topology changes detected by the
corresponding Spanning Tree instance since the management
entity was last reset or initialized(specifically, the
count of times that the tcWhiletimer for any port …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.24.6.1.8
rcMstpXstTopologyChangeFlag
True(1) if the tcWhile timer is non-zero for any port
for the corresponding Spanning Tree instance, false(2)
otherwise.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.6.1.9

rcMstpXstConfigTable

table
.1.3.6.1.4.1.8886.6.1.24.7 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstConfigTable' 
Mstp Instance config table
rcMstpXstConfigEntry row .1.3.6.1.4.1.8886.6.1.24.7.1
Entry of mstp Instance config table
Indexes
Column Syntax OID
rcMstpCfgXstId
The MST instance ID, the value of which is in the range
from 0 to 4095. The instances of this table entry with
rcMstpCfgXstId of zero is automatically created by the
device and can not modified.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.7.1.1
rcMstpXstBridgePriority
Bridge priority, in steps of 4096.
Integer32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.8886.6.1.24.7.1.2
rcMstpXstPrimaryRoot
To configure the switch to become the root bridge for
corresponding Spanning Tree instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.7.1.3
rcMstpXstSecondaryRoot
To configure the switch to become the backup root bridge
for corresponding Spanning Tree instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.6.1.24.7.1.4

rcMstpXstPortTable

table
.1.3.6.1.4.1.8886.6.1.24.8 · 1 row entry · 13 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstPortTable' 
Mstp Instance port table
rcMstpXstPortEntry row .1.3.6.1.4.1.8886.6.1.24.8.1
Entry of mstp Instance port table
Indexes
Column Syntax OID
rcMstpXstPortXstId
The MST instance ID, the value of which is in the range
from 0 to 4095. The instances of this table entry with
rcMstpXstPortXstId of zero is automatically created by
the device and can not modified.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.8.1.1
rcMstpXstPortIndex
A unique value, greater than zero, for each Port. The
value for each interface sub-layer must remain constant
at least from one re-initialization of the entity's
network management system to the next re-initializatio…
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.6.1.24.8.1.2
rcMstpXstPortState
The port's current state in the corresponding Spanning
Tree instance as defined by application of the Multiple
Spanning Tree Protocol.
This state controls what action a port takes on reception
of a frame. For ports…
Enumeration
Enumerated Values:
0disabled
1discarding
2learning
3forwarding
4unknown
 .1.3.6.1.4.1.8886.6.1.24.8.1.3
rcMstpXstPortRole
Indicates this port's role on the corresponding Spanning
Tree instance.
disabled(1) -- this port has no role on this MST instance.
alternate(2) -- this port has the role of alternate port
on t…
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
 .1.3.6.1.4.1.8886.6.1.24.8.1.4
rcMstpXstPortDesignatedRoot
The unique Bridge Identifier of the Bridge recorded as
the Root of the corresponding Spanning Tree in the
Configuration BPDUs transmitted by the Designated Bridge
for the segment to which the port is attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.8886.6.1.24.8.1.5
rcMstpXstPortExternalRootCost
External Root Cost for CIST. the value is always 0, for MSTI.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.24.8.1.6
rcMstpXstPortRegionalRoot
Regional Root of the corresponding Spanning Tree.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.8886.6.1.24.8.1.7
rcMstpXstPortInternalRootCost
Port internal root cost of the corresponding Spanning Tree.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.24.8.1.8
rcMstpXstPortDesignatedBridge
The Bridge Identifier of the bridge which this port considers
to be the Designated Bridge for this port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.8886.6.1.24.8.1.9
rcMstpXstPortDesignatedPort
The Port Identifier of the port on the Designated Bridge for
this port's segment.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.24.8.1.10
rcMstpXstPortOperInternalPathCost
Port Internal path cost of the corresponding Spanning Tree.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.24.8.1.11
rcMstpXstPortRootGuardState
The root guard state of port in special instance.
'yes' means a port was enabled root guard and received
BPDU that include higher priority than the current
root priority in the instance. To prevent attack, port in
th…
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8886.6.1.24.8.1.12
rcMstpXstPortLoopGuardState
The loop guard state of port in special instance.
'yes' means an alternate or root port was enabled
loop guard and did not received any BPDU int three
times of hello-time in the instance.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.8886.6.1.24.8.1.13

rcMstpXstPortConfigTable

table
.1.3.6.1.4.1.8886.6.1.24.9 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcMstpXstPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-MSTP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-MSTP-MIB::rcMstpXstPortConfigTable' 
Mstp Instance port config table
rcMstpXstPortConfigEntry row .1.3.6.1.4.1.8886.6.1.24.9.1
Entry of mstp Instance port config table
Indexes
Column Syntax OID
rcMstpXstPortCfgXstId
The MST instance ID, the value of which is in the range
from 0 to 4095. The instances of this table entry with
rcMstpXstPortCfgXstId of zero is automatically created by
the device and can not modified.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8886.6.1.24.9.1.1
rcMstpXstPortCfgIndex
A unique value, greater than zero, for each Port. The
value for each interface sub-layer must remain constant
at least from one re-initialization of the entity's
network management system to the next re-initializatio…
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.6.1.24.9.1.2
rcMstpXstPortPriority
Port priority, in steps of 16.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.6.1.24.9.1.3
rcMstpXstPortAdminInternalPathCost
The administratively assigned value for the contribution
of this port to the path cost of paths towards the root
of the corresponding Spanning Tree instance. The value 0
means, that the cost will be selected automati…
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.8886.6.1.24.9.1.4