SWITCH-DAI-MIB Table View

This table contains entries that identify the configured DAI trust
for each port.

rcDaiPortTrustEntry row .1.3.6.1.4.1.8886.6.1.38.1.5.1

An entry (conceptual row) in the rcDaiPortStateTable.
The entry identify the configured DAI trust for the port.

Indexes

No indexes recorded

Column	Syntax	OID
rcDaiTrust This object indicates the whether trust arp packet on this port.	Enumerationr/w Enumerated Values: 1 trust 2 untrust	.1.3.6.1.4.1.8886.6.1.38.1.5.1.1

This table contains the list of DAI bind table.

rcDaiBindEntry row .1.3.6.1.4.1.8886.6.1.38.1.6.1

Each entry contains the list of DAI bind table.

Indexes

rcDaiBindIp

Column	Syntax	OID
rcDaiBindIp Index identifying this entry.The ip address of this bind rule.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.6.1.38.1.6.1.1
rcDaiBindPortId This object specifies the port id of this rule.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.38.1.6.1.2
rcDaiBindMac This object specifies the mac address of this rule.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.8886.6.1.38.1.6.1.3
rcDaiBindVlan This object specifies the vlan of this rule.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.38.1.6.1.4
rcDaiBindMode This object specifies the mode of this rule.static(1) specifies this rule is staticly configured.dhcp snooping(2) specifies this rule is learned from dhcp snooping.	Enumeration Enumerated Values: 1 static 2 dhcp-snooping	.1.3.6.1.4.1.8886.6.1.38.1.6.1.5
rcDaiBindInHw This object specifies the state of this rule.InHw(1) specifies this rule is in hardware.notInHw(1) specifies this rule is not in hardware.	Enumeration Enumerated Values: 1 inHw 2 notinHw	.1.3.6.1.4.1.8886.6.1.38.1.6.1.6
rcDaiBindRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.6.1.38.1.6.1.7

This table contains entries that identify the configured arp rate limit enable
for each port.

rcArpRLPortEnableEntry row .1.3.6.1.4.1.8886.6.1.38.1.7.1

An entry (conceptual row) in the rcArpRLPortEnableTable.
The entry identify the configured arp rate limit enable for the port.

Indexes

No indexes recorded

Column	Syntax	OID
rcArpRLEnable This object indicates the whether enable arp rate limit on this port.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.38.1.7.1.1

This table contains entries that identify the configured arp rate limit rate
for each port.

rcArpRLPortRateEntry row .1.3.6.1.4.1.8886.6.1.38.1.8.1

An entry (conceptual row) in the rcArpRLPortRateTable.
The entry identify the configured arp rate limit rate for the port.

Indexes

No indexes recorded

Column	Syntax	OID
rcArpRLRate This object indicates the rate of arp rate limit on this port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.38.1.8.1.1

This table contains entries that identify the arp rate limit status
for each port.

rcArpRLPortStatusEntry row .1.3.6.1.4.1.8886.6.1.38.1.9.1

An entry (conceptual row) in the rcArpRLPortStatusTable.
The entry identify the arp rate limit status for the port.

Indexes

No indexes recorded

Column	Syntax	OID
rcArpRLStatus This object indicates the status of arp rate limit on this port.	Enumeration Enumerated Values: 0 unoverload 1 overload	.1.3.6.1.4.1.8886.6.1.38.1.9.1.1