SW-ACLMGMT-MIB Table View

This table contain ACL mask of Ethernet information.
Access profiles will be created on the switch by row creation and to
 define which parts of each incoming frame's layer 2 part of header
 the switch will examine.  Masks can be entered that will be combined 
 with the values the switch finds in the  specified frame header fields.

swACLEthernetEntry row .1.3.6.1.4.1.171.11.5.1.1.1

A list of information about ACL of Ethernet.

Indexes

swACLEthernetProfileID

Column	Syntax	OID
swACLEthernetProfileID The ID of ACL mask entry ,and is unique in the mask list.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.5.1.1.1.1
swACLEthernetUsevlan Specifies that the switch will examine the VLAN part of each packet header.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.1.1.1.2
swACLEthernetMacAddrMaskState This object indicates the status of MAC address mask. other(1) - Neither source MAC address nor destination MAC address are masked. dst-mac-addr(2) - recieved frames's destination MAC address are …	Enumerationr/w Enumerated Values: 1 other 2 dst-mac-addr 3 src-mac-addr 4 dst-src-mac-addr	.1.3.6.1.4.1.171.11.5.1.1.1.3
swACLEthernetSrcMacAddrMask This object Specifies the MAC address mask for the source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.11.5.1.1.1.4
swACLEthernetDstMacAddrMask This object Specifies the MAC address mask for the destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.11.5.1.1.1.5
swACLEthernetUse8021p Specifies if the switch will examine the 802.1p priority value in the frame's header or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.1.1.1.6
swACLEthernetUseEthernetType Specifies if the switch will examine the Ethernet type value in each frame's header or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.1.1.1.7
swACLEthernetPort This object indicates the portlist of this entry.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.11.5.1.1.1.8
swACLEthernetRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.5.1.1.1.9

This table contain ACL mask of IP information.
Access profiles will be created on the switch by row creation and to
 define which parts of each incoming frame's IP layer part of header
 the switch will examine.  Masks can be entered that will be combined 
 with the values the switch finds in the  specified frame header fields.

swACLIpEntry row .1.3.6.1.4.1.171.11.5.1.2.1

A list of information about ACL of IP Layer.

Indexes

swACLIpProfileID

Column	Syntax	OID
swACLIpProfileID The ID of ACL mask entry ,and is unique in the mask list.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.5.1.2.1.1
swACLIpUsevlan This object indicates if IP layer vlan is examined or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.1.2.1.2
swACLIpIpAddrMaskState This object indicates the status of IP address mask. other(1) - Neither source IP address nor destination IP address are masked. dst-ip-addr(2) - recieved frames's destination IP address are cu…	Enumerationr/w Enumerated Values: 1 other 2 dst-ip-addr 3 src-ip-addr 4 dst-src-ip-addr	.1.3.6.1.4.1.171.11.5.1.2.1.3
swACLIpSrcIpAddrMask This object Specifies IP address mask for the source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.5.1.2.1.4
swACLIpDstIpAddrMask This object Specifies the IP address mask for the destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.5.1.2.1.5
swACLIpUseDSCP This object indicates DSCP protocol is is examined or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.1.2.1.6
swACLIpUseProtoType That object indicates which protocol will be examined.	Enumerationr/w Enumerated Values: 1 none 2 icmp 3 igmp 4 tcp 5 udp 6 protocolId	.1.3.6.1.4.1.171.11.5.1.2.1.7
swACLIpIcmpOption This object indicates which fields should be filled in of ICMP. none(1)- two fields are null. type(2)- type field should be filled in. code(3)- code field should be filled in. type-code(4)- not only type fileld b…	Enumerationr/w Enumerated Values: 1 none 2 type 3 code 4 type-code	.1.3.6.1.4.1.171.11.5.1.2.1.8
swACLIpIgmpOption This object indicates Options of IGMP is examined or not.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.11.5.1.2.1.9
swACLIpTcpOption This object indicates the status of filtered address of TCP. other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be fi…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.11.5.1.2.1.10
swACLIpUdpOption This object indicates the status of filtered address of UDP . other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used…	Enumerationr/w Enumerated Values: 1 other 2 dst-addr 3 src-addr 4 dst-src-addr	.1.3.6.1.4.1.171.11.5.1.2.1.11
swACLIpTCPorUDPSrcPortMask Specifies a TCP port mask for the source port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.11.5.1.2.1.12
swACLIpTCPorUDPDstPortMask Specifies a TCP port mask for the destination port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the destination port if swACLIpUseProtoType is UDP.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.11.5.1.2.1.13
swACLIpTCPFlagBit Specifies a TCP connection flag mask.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.11.5.1.2.1.14
swACLIpProtoIDOption Specifies that the switch will examine each frame's Protocol ID field or not.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.11.5.1.2.1.16
swACLIpProtoIDMask Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.171.11.5.1.2.1.17
swACLIpPort This object indicates the portlist of this entry.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.11.5.1.2.1.18
swACLIpRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.5.1.2.1.19
swACLIpTCPFlagBitMask A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each flag, L, in the range 1 through 6, that this node perfo…	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.171.11.5.1.2.1.115

This table contain ACL mask of payload information.

swACLPayloadEntry row .1.3.6.1.4.1.171.11.5.1.3.1

This Entry contain ACL mask of payload information.

Indexes

swACLPayloadProfileID

Column	Syntax	OID
swACLPayloadProfileID The ID of ACL mask entry ,and is unique in the mask list.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.5.1.3.1.1
swACLPayloadPort The portlist of ACL mask entry .	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.11.5.1.3.1.2
swACLPayloadOffSet0to15 The offset of ACL mask entry .	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.171.11.5.1.3.1.3
swACLPayloadOffSet16to31 The offset of ACL mask entry .	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.171.11.5.1.3.1.4
swACLPayloadOffSet32to47 The offset of ACL mask entry .	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.171.11.5.1.3.1.5
swACLPayloadOffSet48to63 The offset of ACL mask entry .	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.171.11.5.1.3.1.6
swACLPayloadOffSet64to79 The offset of ACL mask entry .	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.171.11.5.1.3.1.7
swACLPayloadRowStatus The status of the entry .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.5.1.3.1.8

This table contain ACL rule of ethernet information.

swACLEtherRuleEntry row .1.3.6.1.4.1.171.11.5.2.1.1

A list of information about ACL rule of the layer 2 part of each packet.

Indexes

swACLEtherRuleProfileID swACLEtherRuleAccessID

Column	Syntax	OID
swACLEtherRuleProfileID The ID of ACL mask entry ,and is unique in the mask list.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.5.2.1.1.1
swACLEtherRuleAccessID The ID of ACL rule entry relate to swACLEtherRuleProfileID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.5.2.1.1.2
swACLEtherRuleVlan Specifies that the access will apply to only to this VLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.171.11.5.2.1.1.3
swACLEtherRuleSrcMacAddress Specifies that the access will apply to only packets with this source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.11.5.2.1.1.4
swACLEtherRuleDstMacAddress Specifies that the access will apply to only packets with this destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.11.5.2.1.1.5
swACLEtherRule8021P Specifies that the access will apply only to packets with this 802.1p priority value.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.5.2.1.1.6
swACLEtherRuleEtherType Specifies that the access will apply only to packets with this hexidecimal 802.1Q Ethernet type value in the packet header.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.171.11.5.2.1.1.7
swACLEtherRuleEnablePriority Specifies that the access will apply only to packets with priority value.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.2.1.1.8
swACLEtherRulePriority Specific the priority will change to the packets while the swACLEtherRuleReplacePriority is enabled .	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.5.2.1.1.9
swACLEtherRuleReplacePriority Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not .	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.2.1.1.10
swACLEtherRuleEnableReplaceDscp Specific the packets that match the access profile will replaced the DSCP field by the switch or not .	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.5.2.1.1.11
swACLEtherRuleRepDscp specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.171.11.5.2.1.1.12
swACLEtherRulePermit This object indicates the permit status of this entry.	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.171.11.5.2.1.1.14
swACLEtherRuleRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.5.2.1.1.15