SVRMGT-MIB
- Source file
SVRMGT-MIB- Last revised
- Not declared
Imported Objects
| RFC-1212 | OBJECT-TYPE (no object page) |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString |
Objects (73)
Showing 73 of 73 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.36 |
||
.1.3.6.1.4.1.36.2 |
||
.1.3.6.1.4.1.36.2.18 |
||
.1.3.6.1.4.1.36.2.18.22 |
||
.1.3.6.1.4.1.36.2.18.22.2 |
||
.1.3.6.1.4.1.36.2.18.22.2.1 |
||
|
|
.1.3.6.1.4.1.36.2.18.22.2.1.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.1.2 |
|
.1.3.6.1.4.1.36.2.18.22.2.2 |
||
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.2 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.10 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.11 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.12 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.13 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.14 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.15 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.16 |
|
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.17 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.18 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.19 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.2 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.20 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.21 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.22 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.23 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.24 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.25 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.26 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.27 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.28 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.29 |
|
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.3 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.30 |
|
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.31 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.32 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.33 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.5 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.6 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.7 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.8 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.2.3.1.9 |
|
.1.3.6.1.4.1.36.2.18.22.2.3 |
||
|
|
.1.3.6.1.4.1.36.2.18.22.2.3.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.3.2 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.3.3 |
|
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.36.2.18.22.2.3.4 |
.1.3.6.1.4.1.36.2.18.22.2.4 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.36.2.18.22.2.4.1 |
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.2 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.6 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.6.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.6.1.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.6.1.2 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.6.1.3 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.7 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.7.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.7.1.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.4.7.1.2 |
|
.1.3.6.1.4.1.36.2.18.22.2.5 |
||
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.1 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.2 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.3 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.4 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.5 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.6 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.7 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.8 |
|
|
|
.1.3.6.1.4.1.36.2.18.22.2.5.9 |
Dependencies (6) 3 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC-1212rfc
- RFC1155-SMIrfc
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- RFC1213-MIBrfc
- SVRMGT-MIBhpselected
Type Definitions (6)
| Enumeration |
unknown(1)other(2)processorStatus(3)diskStatus(4)fanStatus(5)voltageStatus(6)powerSupplyStatus(7)temperatureStatus(8)memoryStatus(9)fileUsage(10)temperatureReading(11)cpuUsage(12)networkInboundErrors(13)networkOutboundErrors(14)networkInboundPackets(15)networkOutboundPackets(16)networkInboundDiscards(17)networkOutboundDiscards(18)networkInboundUnicastPackets(19)networkOutboundUnicastPackets(20)networkInboundNonUnicastPackets(21)networkOutboundNonUnicastPackets(22)networkInboundOctets(23)networkOutboundOctets(24)networkUnknownProtocol(25)voltageReading(26)clusterGroupStatus(27)secureBoxStatus(28)secureBoxBreakInCount(29) |
|
| Enumeration |
true(1)false(2) |
|
| Enumeration |
greaterThan(1)greaterThanOrEqualTo(2)equalTo(3)lessThanOrEqualTo(4)lessThan(5)notEqualTo(6) |
|
| Enumeration |
high(1)medium(2)low(3)informational(4) |
|
| Enumeration |
noError(1)tooBig(2)readonly(3)genericError(4)noSuchName(5)badValue(6) |
|
| Enumeration |
unknown(1)other(2)serverWorks(3)serverWorksMinimalHealth(4)netView(5)openView(6)uniCenter(7)distributedMonitor(8)bmcPatrol(9)eminate(10) |
Notifications / Traps (39)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.36.2.18.22.2.0.100 |
This is a reset trap. The value that cuased the alarm to be reset is
returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.101 |
This is a high severity trap. The value that caused the alarm to occur
is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.102 |
This is a medium severity trap. The value that caused the alarm to
occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.103 |
This is a low severity trap. The value that caused the alarm to occur
is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.104 |
This is an Informational severity trap. The value that caused the
alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.105 |
This indicates that the disk is not available for any use. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.106 |
This indicates that an unusual disk error condition has occured but
that the device is still operational. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.107 |
This indicates that the disk is up and running and that no unusual
error conditions are known. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.108 |
This indicates that file system usage has exceeded the user defined
threshold.The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.109 |
This indicates that the temperature is within normal limits. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.110 |
This indicates that the temperature is in a critical state either low
or high. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.111 |
This indicates that the temperature is in a warning state either low or
high. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.112 |
This indicates that the fan has failed. The value that caused the alarm
to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.113 |
This indicates that the fan is functioning well. The value that caused
the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.114 |
This indicates that the fan is a backup fan. The value that caused the alarm
to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.115 |
This indicates that the voltage is within normal limits. The value that
caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.116 |
This indicates that the voltage is in a critical state, either low or
high, but has not reached the shutdown threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.117 |
This indicates that the voltage is in a warning state, either low or
high. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.118 |
This indicates that the power supply failed. The value that caused the
alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.119 |
This indicates that the power supply is in a warning state but has
not yet failed. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.120 |
This indicates that the power supply is functioning well. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.121 |
This indicates that the power supply is in backup state. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.122 |
This indicates that the memory element has failed. The value that
caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.123 |
This indicates that the memory element is reporting errors. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.124 |
This indicates that the memory element is functioning well. The value
that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.125 |
This indicates that the network interface inbound errors have exceeded
the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.126 |
This indicates that the network interface inbound octets have exceeded
the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.127 |
This indicates that the network interface outbound octets have exceeded
the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.128 |
This indicates that the network interface inbound packets have exceeded
the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.129 |
This indicates that the network interface outbound packets have
exceeded the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.130 |
This indicates that the network interface outbound errors have exceeded
the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.131 |
This indicates that the network interface inbound discards have
exceeded the user defined threshold. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.132 |
This indicates that the processor is not available for any use. The
value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.133 |
This indicates that the processor has encountered an unusual error
condition but is still considered to be operational. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.134 |
This indicates that the processor is up and running and that no unusual
error conditions are known. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.135 |
This indicates that CPU usage has exceeded the user defined threshold.
The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.136 |
This indicates that the node has become the current owner of a cluster
resource. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.137 |
This indicates that the node is not the current owner of a cluster
resource. The value that caused the alarm to occur is returned in svrThrLastValue. |
|
.1.3.6.1.4.1.36.2.18.22.2.0.99 |
This is a modification trap. The threshold OID whose value caused the
alarm is in svrControlModifyOID. |