SUPERMICRO-TE-LINK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
25

fsTeLinkTable

table
.1.3.6.1.4.1.10876.101.2.67.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsTeLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-TE-LINK-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-TE-LINK-MIB::fsTeLinkTable' 
This table contains additional properties for TE-Links like
bundling or unbundling of TE-Links. 
This table augments the TeLink Table.
fsTeLinkEntry row .1.3.6.1.4.1.10876.101.2.67.2.1.1
An entry in this table exists for each ifEntry with an
ifType of teLink(200) for every TE link. An ifEntry
in the ifTable must exist before a teLinkEntry is created
with the corresponding ifIndex. If a TE link entry i…
Indexes
No indexes recorded
Column Syntax OID
fsTeLinkName
Textual name (unique on this system) of the TeLink interface.
This is mandatory, user needs to provide TE-Link Name for
configuring TE-Link on the router.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.1
fsTeLinkRemoteRtrId
This object identifies the routerId of the router/device at the
other end of the link. This is useful in the case of FA-TE links
where it is not possible to get the routerId by the other means.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.2
fsTeLinkMaximumBandwidth
This attribute specifies the maximum bandwidth for a Te-link. This is
the union of the maximum bandwidth of all the component links within
TE link.
bpsTE-LINK-STD-MIBTeLinkBandwidth
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.3
fsTeLinkType
This object identifies whether the TE-Link is bundled or unbundled.
By default, TE-Links are unbundled.
Enumerationr/w
Enumerated Values:
0unbundle
1bundle
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.4
fsTeLinkInfoType
This is to indicate the link information type. This information
is very crucial for proper generation of Traffic Engineering LSAs.

forwardingAdjacencyChannel -- Indicates the link information is about the…
Enumerationr/w
Enumerated Values:
0forwardingAdjacenyChannel
1dataChannel
2dataAndControlChannel
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.5
fsTeLinkIfType
This object defines the interface type of the TE link.
The links that are definitively point to point take the value
'pointToPoint. Rest will take 'multiAccess'.
When this TE link operates as dataAndControlChannel, this…
Enumerationr/w
Enumerated Values:
1pointToPoint
2multiAccess
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.6
fsTeLinkIsAdvertise
This object identifies whether the TE-Link should be advertised in
IGP Domain. If set to true (1), then the TE-Link is advertised.
If set to false (2), then the TE-Link is not advertised.
By default, all TE-links are ad…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.2.67.2.1.1.7

fsTeLinkBwThresholdTable

table
.1.3.6.1.4.1.10876.101.2.67.2.2 · 1 row entry · 18 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsTeLinkBwThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-TE-LINK-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-TE-LINK-MIB::fsTeLinkBwThresholdTable' 
This table contains information about the Bandwidth Threshold
values which are used in bandwidth advertisement of TE-Links.
fsTeLinkBwThresholdEntry row .1.3.6.1.4.1.10876.101.2.67.2.2.1
An entry in this table represents a set of Bandwidth Thresholds
per TE-Link.
This table can have either fsTeLinkBwThresholdIndex as 1 or 2.
fsTeLinkBwThresholdIndex = 1 specifies incremental threshold
values and
fsTe…
Indexes
Column Syntax OID
fsTeLinkBwThresholdIndex
This object can have either index as 1 or 2.
Index = 1 specifies incremental threshold values and
Index = 2 specifies decremental threshold values.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.1
fsTeLinkBwThreshold0
16 Threshold values can be specified.
This object is used to indicate first bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.2
fsTeLinkBwThreshold1
16 Threshold values can be specified.
This object is used to indicate second bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.3
fsTeLinkBwThreshold2
16 Threshold values can be specified.
This object is used to indicate third bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.4
fsTeLinkBwThreshold3
16 Threshold values can be specified.
This object is used to indicate fourth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.5
fsTeLinkBwThreshold4
16 Threshold values can be specified.
This object is used to indicate fifth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.6
fsTeLinkBwThreshold5
16 Threshold values can be specified.
This object is used to indicate sixth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.7
fsTeLinkBwThreshold6
16 Threshold values can be specified.
This object is used to indicate seventh bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.8
fsTeLinkBwThreshold7
16 Threshold values can be specified.
This object is used to indicate eighth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.9
fsTeLinkBwThreshold8
16 Threshold values can be specified.
This object is used to indicate ninth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.10
fsTeLinkBwThreshold9
16 Threshold values can be specified.
This object is used to indicate tenth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.11
fsTeLinkBwThreshold10
16 Threshold values can be specified.
This object is used to indicate eleventh bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.12
fsTeLinkBwThreshold11
16 Threshold values can be specified.
This object is used to indicate twelfth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.13
fsTeLinkBwThreshold12
16 Threshold values can be specified.
This object is used to indicate thirteenth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.14
fsTeLinkBwThreshold13
16 Threshold values can be specified.
This object is used to indicate fourteenth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.15
fsTeLinkBwThreshold14
16 Threshold values can be specified.
This object is used to indicate fifteenth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.16
fsTeLinkBwThreshold15
16 Threshold values can be specified.
This object is used to indicate sixteenth bandwidth threshold.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.17
fsTeLinkBwThresholdRowStatus
This object is used to create, modify or delete an entry in this
bandwidth threshold table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.2.67.2.2.1.18