SUPERMICRO-RTM6MI-MIB Table View

Information describing the parameters
of RTMv6's Virtual context

fsMIRtm6Entry row .1.3.6.1.4.1.10876.101.2.32.2.1

Information describing the parameters
of one of the RTMv6's virtual context

Indexes

fsMIRtm6ContextId

Column	Syntax	OID
fsMIRtm6ContextId A 32-bit unique context id identifing the RTMv6 virtual Context Minimum value of context ID is 0 (this is for defualt Virtual context. The Max context ID is system dependent and the value is taken care in virtual conte…	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.10876.101.2.32.2.1.1
fsMIRrd6RouterId The 4-byte Identifier value that uniquely identifies the router in its operational environment. This can be set only if the fsMIRrd6AdminStatus is disabled. Router ID is configured for each RTMv6 Virtual context	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.32.2.1.2
fsMIRrd6FilterByOspfTag To enable distribution of routes based on the tag value (ref RFC1745 sec 2.1). This filter takes precedence over the common RRD6 control table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.32.2.1.3
fsMIRrd6FilterOspfTag The tag based on which routes have to be filtered for export to routing protocols	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.32.2.1.4
fsMIRrd6FilterOspfTagMask The bitmask to be applied to fsMIRrd6FilterOspfTag for comparison. This bitmask specifies the fields of the OSPF tag to be considered for filtering.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.32.2.1.5
fsMIRrd6RouterASNumber The Autonomous system number in which this router is running.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.32.2.1.6
fsMIRrd6AdminStatus The Admin status of the RTMv6 virtual context. This object can be set to enabled only after setting the AS number and the Router ID to a valid value.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.32.2.1.7
fsMIRrd6Trace This is used to define the trace level in each RTMv6 virtual context. Enables the tracing in the selected submodule in RTM6v6 context. A 32 bit integer is used to store the Tracing level in the specified module. Differe…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.32.2.1.8

Control Table for configuring routes allowed/denied
for export in the RTMv6 virtual Context.

fsMIRrd6ControlEntry row .1.3.6.1.4.1.10876.101.2.32.3.1

An entry of fsMIRrd6ControlTable.

Indexes

fsMIRtm6ContextId fsMIRrd6ControlDestIpAddress fsMIRrd6ControlNetMaskLen

Column	Syntax	OID
fsMIRrd6ControlDestIpAddress The destination IPv6 address of this route.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.10876.101.2.32.3.1.1
fsMIRrd6ControlNetMaskLen Indicate the prefix len and the derived reverse mask should be logical-ANDed with the destination address. The mask is also used to specify the range of IP addresses. For Eg: Destination Net = 128:11:: and Net …	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.10876.101.2.32.3.1.2
fsMIRrd6ControlSourceProto The Identifier of the source routing protocol. A value of zero will be interpreted as 'any', which matches route from all protocols. This object should be set before fsMIRrd6ControlRouteExportFlag is configured. For an …	Enumerationr/w Enumerated Values: 0 all 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 bgp 8 idrp 9 igrp	.1.3.6.1.4.1.10876.101.2.32.3.1.3
fsMIRrd6ControlDestProto The identifier of the destination routing protocol. This field is a bit mask, a 1 indicates that the route has to be exported to the routing protocol corresponding to the bit-position. +---------------------------------…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.32.3.1.4
fsMIRrd6ControlRouteExportFlag This flag specifies whether the route is allowed for export or denied. If the ALL ROUTE entry has this value as permit, then all other entries can be set only as deny and vice-versa. Changing the status of the ALL ROUTE…	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.10876.101.2.32.3.1.5
fsMIRrd6ControlRowStatus The status of this row by which a new row can be created or deleted according to the SMIv2 conventions. The values supported for set operation are - createandwait, active, destroy. Creation/Deletion of the ALL ROUTE ent…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.32.3.1.6

Registration Table for the different routing protocols.
This table is read-only and reflects the information of 
routing protocols held by the Route Table Manager.

fsMIRrd6RoutingProtoEntry row .1.3.6.1.4.1.10876.101.2.32.4.1

An entry in to the fsMIRrd6RoutingProtoTable.

Indexes

fsMIRtm6ContextId fsMIRrd6RoutingProtoId

Column	Syntax	OID
fsMIRrd6RoutingProtoId The Identifier of the routing protocol registered with the routing table manager	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 bgp 8 idrp 9 igrp	.1.3.6.1.4.1.10876.101.2.32.4.1.1
fsMIRrd6RoutingRegnId The Registeration ID assigned by the RTM for this Routing Protocol	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.32.4.1.2
fsMIRrd6RoutingProtoTaskIdent The Name/Identifier of the Routing Task	OctetString	.1.3.6.1.4.1.10876.101.2.32.4.1.3
fsMIRrd6RoutingProtoQueueIdent The Name/Identifier of the Message Queue to which messages to the Routing Task are posted.	OctetString	.1.3.6.1.4.1.10876.101.2.32.4.1.4
fsMIRrd6AllowOspfAreaRoutes A single configuration to PERMIT all OSPF inter-area and intra-area address/mask pairs to be exported into this routing protocol. This configuration takes precedence over filtering based on the control table.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.32.4.1.5
fsMIRrd6AllowOspfExtRoutes A single configuration to PERMIT all OSPF Type 1 and Type 2 Exteral address/mask pairs to be exported into this routing protocol. This configuration together with the control table, take care of selective route export.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10876.101.2.32.4.1.6