SUPERMICRO-RTM6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

fsRrd6ControlTable

table
.1.3.6.1.4.1.10876.101.1.92.2 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsRrd6ControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-RTM6-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-RTM6-MIB::fsRrd6ControlTable' 
Control Table for configuring routes allowed/denied
for export.
fsRrd6ControlEntry row .1.3.6.1.4.1.10876.101.1.92.2.1
An entry of fsRrd6ControlTable.
Indexes
Column Syntax OID
fsRrd6ControlDestIpAddress
The destination IPv6 address of this route.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.10876.101.1.92.2.1.1
fsRrd6ControlNetMaskLen
Indicate the prefix len and the derived reverse mask should be
logical-ANDed with the destination address. The mask is
also used to specify the range of IP addresses.
For Eg:
Destination Net = 128:11:: and
Net …
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.1.92.2.1.2
fsRrd6ControlSourceProto
The Identifier of the source routing protocol.
A value of zero will be interpreted as 'any', which matches route
from all protocols. This object should be set before
fsRrd6ControlRouteExportFlag is configured. For an AL…
Enumerationr/w
Enumerated Values:
0all
1other
2local
3netmgmt
4ndisc
5rip
6ospf
7bgp
8idrp
9igrp
 .1.3.6.1.4.1.10876.101.1.92.2.1.3
fsRrd6ControlDestProto
The identifier of the destination routing protocol.
This field is a bit mask, a 1 indicates that the route
has to be exported to the routing protocol corresponding
to the bit-position.
+---------------------------------…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.92.2.1.4
fsRrd6ControlRouteExportFlag
This flag specifies whether the route is allowed for export or
denied. If the ALL ROUTE entry has this value as permit, then all
other entries can be set only as deny and vice-versa.
Changing the status of the ALL ROUTE…
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.10876.101.1.92.2.1.5
fsRrd6ControlRowStatus
The status of this row by which a new row can be created or deleted
according to the SMIv2 conventions. The values supported for set
operation are - createandwait, active, destroy. Creation/Deletion
of the ALL ROUTE ent…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.92.2.1.6

fsRrd6RoutingProtoTable

table
.1.3.6.1.4.1.10876.101.1.92.3 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsRrd6RoutingProtoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-RTM6-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-RTM6-MIB::fsRrd6RoutingProtoTable' 
Registration Table for the different routing protocols.
This table is read-only and reflects the information of 
routing protocols held by the Route Table Manager.
fsRrd6RoutingProtoEntry row .1.3.6.1.4.1.10876.101.1.92.3.1
An entry in to the fsRrd6RoutingProtoTable.
Indexes
Column Syntax OID
fsRrd6RoutingProtoId
The Identifier of the routing protocol registered
with the routing table manager
Enumeration
Enumerated Values:
1other
2local
3netmgmt
4ndisc
5rip
6ospf
7bgp
8idrp
9igrp
 .1.3.6.1.4.1.10876.101.1.92.3.1.1
fsRrd6RoutingRegnId
The Registeration ID assigned by the RTM for this Routing Protocol
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.92.3.1.2
fsRrd6RoutingProtoTaskIdent
The Name/Identifier of the Routing Task
OctetString .1.3.6.1.4.1.10876.101.1.92.3.1.3
fsRrd6RoutingProtoQueueIdent
The Name/Identifier of the Message Queue to which messages
to the Routing Task are posted.
OctetString .1.3.6.1.4.1.10876.101.1.92.3.1.4
fsRrd6AllowOspfAreaRoutes
A single configuration to PERMIT all OSPF inter-area and intra-area
address/mask pairs to be exported into this routing protocol.
This configuration takes precedence over filtering based on
the control table.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.1.92.3.1.5
fsRrd6AllowOspfExtRoutes
A single configuration to PERMIT all OSPF Type 1 and Type 2
Exteral address/mask pairs to be exported into this routing protocol.
This configuration together with the control table, take care of
selective route export.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.1.92.3.1.6