SUPERMICRO-RM-TE-LINK-MIB Table View

This table specifies the grouping of characteristics/attributes of
TE links.

futRMTeLinkEntry row .1.3.6.1.4.1.10876.101.1.72.10.1.2.1

An entry in this table exists for each ifEntry with an
ifType of futRMTeLink(200), i.e. for every TE link. An ifEntry
in the ifTable must exist before a futRMTeLinkEntry is created with
the corresponding ifIndex. If a T…

Indexes

IF-MIBifIndex

Column	Syntax	OID
futRMTeLinkLocalIpAddr The local Internet address for numbered links. For an unnumbered link, the local address is of type unknown and this object is set to the zero length string and the futRMTeLinkOutgoingIfId object then identifies the …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.1
futRMTeLinkRemoteIpAddr The remote Internet address for numbered links. The remote IP address associated with the TE link (IPv4). For an unnumbered link, the remote address is of type unknown and this object is set to the zero length string…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.2
futRMTeLinkRemoteRtrId This object identifies the routerId of the router/device at the other end of the link. This is useful in the case of FA-TE links where it is not possible to get the routerId by the other means.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.3
futRMTeLinkMetric The traffic engineering metric for the TE link.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.4
futRMTeLinkProtectionType This attribute specifies link protection type of the TE link. Description of the different protection types can be found in the 'Routing Extensions in Support of Generalized MPLS' document.	Enumerationr/w Enumerated Values: 1 extraTraffic 2 unprotected 4 shared 8 dedicated1For1 16 dedicated1Plus1 32 enhanced 64 reserved1 128 reserved2	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.5
futRMTeLinkResourceClass This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. Encoding of the resource class is described in the 'Traffic Engineering Extensions to OSPF Version 2' document.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.6
futRMTeLinkIncomingIfId For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to this TE link. For numbered links, the address is stored in the…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.7
futRMTeLinkOutgoingIfId If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. For numbered links, the address is stored in the futRMTeLinkLocalIp…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.8
futRMTeLinkMaxBw Maximum Bandwidth of the TE Link	bytes per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.9
futRMTeLinkMaxResBw Maximum Reservable Bandwidth of the TE Link	bytes per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.10
futRMTeLinkAreaId AreaId of the area to which this TE link belongs to. For forwarding adjacency link this variable must be set to indicate the area id of the TE link.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.11
futRMTeLinkInfoType This is to indicate the link information type. This information is very crucial for proper generation of Traffic Engineering LSAs. areaIdInfo -- Indicates the areaid information is given by …	Enumerationr/w Enumerated Values: 1 areaIdInfo 2 datachannel 3 dataAndControlChannel	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.12
futRMTeLinkRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.72.10.1.2.1.13

This table specifies the link descriptors associated with the
TE links.

futRMTeLinkSwDescriptorEntry row .1.3.6.1.4.1.10876.101.1.72.10.1.3.1

An entry in this table is created for every TE link descriptor.
An ifEntry in the ifTable must exist before a
futRMTeLinkDescriptorEntry using the same ifIndex is created.
ifType of ifEntry must be futRMTeLink(200).
If …

Indexes

IF-MIBifIndex futRMTeLinkSwDescriptorId

Column	Syntax	OID
futRMTeLinkSwDescriptorId This object specifies the link descriptor identifier.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.1
futRMTeLinkSwDescrSwitchingCap This attribute specifies the TE link switching capability information.	Enumerationr/w Enumerated Values: 1 psc1 2 psc2 3 psc3 4 psc4 51 l2sc 100 tdm 150 lsc 200 fsc	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.2
futRMTeLinkSwDescrEncodingType This attribute specifies the TE link encoding type.	TeLinkEncodingTyper/w Type Values: 1 packet 2 ethernet 3 ansiEtsiPdh 5 sdhItuSonetAnsi 7 digitalWrapper 8 lambda 9 fiber 11 fiberChannel	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.3
futRMTeLinkSwDescrMinLSPBandwidth This attribute specifies the minimum reservable bandwidth on the TE link.	bytes per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.4
futRMTeLinkSwDescrMTU This attribute specifies the maximum MTU size to use on this link for forwarding data packets.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.5
futRMTeLinkSwDescrIndication This attribute indicates whether the interface supports standard or arbitrary SONET/SDH is encoded in 1 octet field. This is 0 if the interface supports standard SONET/SDH, and 1 if the interface supports arbitrary S…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.6
futRMTeLinkSwDescrRowStatus This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if futRMTeLinkDescrRowStatus is in active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.72.10.1.3.1.7

This table specifies the link Maxbandwidths associated with the
TE links.

futRMTeLinkSwDescrMaxBwEntry row .1.3.6.1.4.1.10876.101.1.72.10.1.4.1

An entry in this table is created for each TE link interface.
An ifEntry in the ifTable must exist before a
futRMTeLinkSwDescrMaxBwEntry using the same ifIndex is created.
ifType of ifEntry must be futRMTeLink(200).
If …

Indexes

IF-MIBifIndex futRMTeLinkSwDescriptorId futRMTeLinkSwDescrMaxBwPriority

Column	Syntax	OID
futRMTeLinkSwDescrMaxBwPriority This object specifies priority at which this MaxLSPBandwidth is available.	TeLinkPriority Type Constraints: range: 0..7	.1.3.6.1.4.1.10876.101.1.72.10.1.4.1.1
futRMTeLinkSwDescrMaxLSPBandwidth This attribute specifies the Maximum Link Bandwidth of the TE link. Maximum LSP bandwidth is carried per priority, and may vary as LSPs are set up and torn down.	bytes per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.4.1.2
futRMTeLinkSwDescrMaxBwRowStatus This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if futRMTeLinkSwDescrMaxBwRowStatus is in active(1) state.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.72.10.1.4.1.3

This table specifies the SRLGs associated with TE links.

futRMTeLinkSrlgEntry row .1.3.6.1.4.1.10876.101.1.72.10.1.5.1

An entry in this table contains information about a
SRLG associated with a TE link.
An ifEntry in the ifTable must exist before a
futRMTeLinkSrlgEntry using the same ifIndex is created.
ifType of ifEntry must be futRMTe…

Indexes

IF-MIBifIndex futRMTeLinkSrlg

Column	Syntax	OID
futRMTeLinkSrlg This identifies a SRLG supported by the TE link. An SRLG is identified with a 32 bit number that is unique within an IGP domain. Zero is a valid SRLG number.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.5.1.1
futRMTeLinkSrlgRowStatus This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified if futRMTeLinkSrlgRowStatus is active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.72.10.1.5.1.2

This table specifies the priority-based bandwidth table
for TE links.

futRMTeLinkBandwidthEntry row .1.3.6.1.4.1.10876.101.1.72.10.1.6.1

An entry in this table contains information about
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a futRMTeLinkBandwidthEntry using the
same ifIndex is created. ifType of ifEntry mu…

Indexes

IF-MIBifIndex futRMTeLinkBandwidthPriority

Column	Syntax	OID
futRMTeLinkBandwidthPriority This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document.	TeLinkPriority Type Constraints: range: 0..7	.1.3.6.1.4.1.10876.101.1.72.10.1.6.1.1
futRMTeLinkUnreservedBandwidth This attribute specifies the TE link unreserved bandwidth at priority p.	bytes per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.72.10.1.6.1.2
futRMTeLinkBandwidthRowStatus This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when futRMTeLinkBandwidthRowStatus is active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.72.10.1.6.1.3