SUPERMICRO-PIM-MIB Table View

The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.

fsPimInterfaceEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.1.1

An entry (conceptual row) in the fsPimInterfaceTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimInterfaceIfIndex The ifIndex value of this PIM interface.	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.1
fsPimInterfaceCompId This object is the component Id of the component to which the interface belongs to	Integer32r/w	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.2
fsPimInterfaceDRPriority The DR priority value configured for Hello message for that router per interface	Unsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.3
fsPimInterfaceHelloHoldTime The hold time configured for the Hello message for that router per interface	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.4
fsPimInterfaceLanPruneDelayPresent The LanPruneDelayPresent bit configured for the router per interface	Enumerationr/w	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.5
fsPimInterfaceLanDelay The LanPruneDelayPresent bit configured for the router per interface	Integer32r/w	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.6
fsPimInterfaceOverrideInterval The Override Interval configured for the router per interface	Integer32r/w	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.7
fsPimInterfaceGenerationId The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding states by triggering Bootstrap and Join/…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.8
fsPimInterfaceSuppressionInterval The interface suppression period	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.9
fsPimInterfaceAdminStatus The interface Administrative Status	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.10
fsPimInterfaceBorderBit This indicates this interface is border interface or not, 1-- border interface, 0(default value)-- Normal interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.1.1.11

The (conceptual) table listing the router's PIM neighbors.

fsPimNeighborEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.2.1

An entry (conceptual row) in the fsPimNeighborTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimNeighborAddress The IP address of the PIM neighbor for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.1
fsPimNeighborCompId The component Id of this neighbor table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.2
fsPimNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.3
fsPimNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.4
fsPimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.5
fsPimNeighborGenerationId The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding states by triggering Bootstrap and Join/Prune messages to the …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.6
fsPimNeighborLanDelay The LanDelay configured for this PIM neighbor	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.7
fsPimNeighborDRPriority The DR priority value configured for this PIM neighbor	Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.8
fsPimNeighborOverrideInterval The Override Interval configured for this PIM neighbor	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.2.1.9

The (conceptual) table listing PIM multicast routing information

fsPimIpMRouteEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.3.1

An entry (conceptual row) in the fsPimIpMRouteTable. There
is one entry for each incoming interface running PIM

Indexes

No indexes recorded

Column	Syntax	OID
fsPimIpMRouteCompId The component Id of this table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.1
fsPimIpMRouteGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.2
fsPimIpMRouteSource The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.3
fsPimIpMRouteSourceMask The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.4
fsPimIpMRouteUpstreamNeighbor The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.5
fsPimIpMRouteInIfIndex The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.6
fsPimIpMRouteUpTime The time since the multicast routing information represented by this entry was learned by the router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.7
fsPimIpMRoutePkts The number of packets which this router has received from these sources and addressed to this multicast group address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.8
fsPimIpMRouteUpstreamAssertTimer The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert ha…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.9
fsPimIpMRouteAssertMetric The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.10
fsPimIpMRouteAssertMetricPref The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.11
fsPimIpMRouteAssertRPTBit The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.12
fsPimIpMRouteTimerFlags This object describes PIM-specific Timer flags related to a Multicast Route Entry. If the bit is 1 indicates that timer is started for that entry. The bits corresponding to the timers are as follows: 0 - JP Suppressi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.13
fsPimIpMRouteFlags This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.20.1.2.3.1.14

The (conceptual) table listing PIM information on the next hops
on outgoing interfaces for forwarding multicast datagrams

fsPimIpMRouteNextHopEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.4.1

An entry (conceptual row) in the fsPimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
fsPimIpMRouteNextHopState is pruned(1).

Indexes

No indexes recorded

Column	Syntax	OID
fsPimIpMRouteNextHopCompId The component Id for this table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.1
fsPimIpMRouteNextHopGroup The IP multicast group for which this entry specifies a next-hop on an outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.2
fsPimIpMRouteNextHopSource The network address which when combined with the corresponding value of fsPimIpMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.3
fsPimIpMRouteNextHopSourceMask The network mask which when combined with the corresponding value of fsPimIpMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.4
fsPimIpMRouteNextHopIfIndex The ifIndex value of the interface for the outgoing interface for this next-hop.	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.5
fsPimIpMRouteNextHopAddress The address of the next-hop specific to this entry. For most interfaces, this is identical to fsPimIpMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.6
fsPimIpMRouteNextHopPruneReason This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.	Enumeration	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.7
fsPimIpMRouteNextHopState An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' i…	Enumeration	.1.3.6.1.4.1.10876.101.1.20.1.2.4.1.8

The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of fsPimComponentCRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of fsPimComponentCRPHoldTime is non-
zero).

fsPimCandidateRPEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.6.1

An entry (conceptual row) in the fsPimCandidateRPTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimCandidateRPCompId Component Id for this table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.1
fsPimCandidateRPGroupAddress The IP multicast group address which, when combined with fsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.2
fsPimCandidateRPGroupMask The multicast group address mask which, when combined with fsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.3
fsPimCandidateRPAddress The (unicast) address of the interface which will be advertised as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.4
fsPimCandidateRPPriority The priority of the interface which will be advertised as a Candidate-RP.	Integer32r/w	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.5
fsPimCandidateRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.20.1.2.6.1.6

The (conceptual) table listing the IP multicast groups for
which the routers are available as the RP through static 
configuration.

fsPimStaticRPSetEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.7.1

An entry (conceptual row) in the pimStaticRPSetTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimStaticRPSetCompId Component Id for this table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.7.1.1
fsPimStaticRPSetGroupAddress The IP multicast group address which, when combined with pimStaticRPSetGroupMask, gives the group prefix for which this entry contains information about the RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.7.1.2
fsPimStaticRPSetGroupMask The IP multicast group address mask which, when combined with pimStaticRPSetGroupAddress, gives the group prefix for which this entry contains information about the RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.7.1.3
fsPimStaticRPAddress The address of the interface which will be static configured as the RP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.7.1.4
fsPimStaticRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.20.1.2.7.1.5

The (conceptual) table listing the components modes).

fsPimComponentModeEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.8.1

An entry (conceptual row) in the fsPimComponentModeTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimComponentId Component Id for this table	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.8.1.1
fsPimComponentMode This object indicates the mode of the component. A value of 1 indicates the component is running in DM mode and value of 2 indicated that the component is running in DM mode	Enumerationr/w	.1.3.6.1.4.1.10876.101.1.20.1.2.8.1.2
fsPimCompGraftRetryCount The value indicates the number of retries that can be made to send the graft message	Integer32r/w	.1.3.6.1.4.1.10876.101.1.20.1.2.8.1.3

The (conceptual) table listing RPs configured in CISCO Router

fsPimRegChkSumCfgEntry row .1.3.6.1.4.1.10876.101.1.20.1.2.9.1

An entry (conceptual row) in the fsPimRegChkSumCfgTable.

Indexes

No indexes recorded

Column	Syntax	OID
fsPimRegChkSumTblCompId Component Id for this table, This configuration is valid only for a sparse mode component.	Integer32	.1.3.6.1.4.1.10876.101.1.20.1.2.9.1.1
fsPimRegChkSumTblRPAddress The RP Address of the router to which the Register checksum should be calculated.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.20.1.2.9.1.2
fsPimRPChkSumStatus The status of this Row, by which new entries may be created If the RowStatus is set, then the Register Message checksum should be calculated including the data packet other wise for for any RP address not part of this t…	Enumerationr/w	.1.3.6.1.4.1.10876.101.1.20.1.2.9.1.3