SUPERMICRO-OSPFMI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
183

fsMIOspfTable

table
.1.3.6.1.4.1.10876.101.1.145.1.3 · 1 row entry · 28 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfTable' 
Table to store different context specific ospf parameters
fsMIOspfEntry row .1.3.6.1.4.1.10876.101.1.145.1.3.1
Each entry has routing information
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfOverFlowState
Indicates whether router is in overflow state or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.1
fsMIOspfPktsRcvd
This gives the Total no. of Packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.2
fsMIOspfPktsTxed
This gives the Total no. of Packets Transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.3
fsMIOspfPktsDisd
This gives the Total no. of Packets Discarded.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.4
fsMIOspfRFC1583Compatibility
Controls the preference rules, when chossing among multiple AS external LSAs advertising the same destination.
When set to enabled, the preference rules remain those specified
by RFC1583.
When set to disabled the prfer…
SUPERMICRO-MISTDOSPF-MIBStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.5
fsMIOspfTraceLevel
This object is used to define level of trace required for OSPF.
Levels are defined as follows.
0x00000100 -- Packet High Level Dump Trace.
0x00000200 -- Packet Low Level Dump Trace.
0x00000400 -- Packet Hex Dump Trace.…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.12
fsMIOspfMinLsaInterval
The minimum time between distinct originations of any particular LSA.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.13
fsMIOspfABRType
Different Types of ABRs supported
Enumerationr/w
Enumerated Values:
1standardABR
2ciscoABR
3ibmABR
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.14
fsMIOspfNssaAsbrDefRtTrans
Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When set
disabled, P-Bit is clear in the generated default Lsa.
When set to enabled, P-Bit is set in the generated
Type-7 defau…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.15
fsMIOspfDefaultPassiveInterface
When set to true all OSPF interfaces created after this
setting will be passive interfaces.
If set to false OSPF interfaces created after this setting
will not be passive.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.16
fsMIOspfSpfHoldtime
Minimum time between two consecutive SPF calculations in one ospf instances.
Time is configured in milli seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.17
fsMIOspfSpfDelay
The Delay at which routing calculation is carried after a topology change in one ospf instance.
Time is configured in milli seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.18
fsMIOspfRestartSupport
The router.s support for OSPF graceful restart.
Options include: no restart support, only planned
restarts, or both planned and unplanned restarts.

This object is persistent and when written
the entity SH…
Enumerationr/w
Enumerated Values:
1none
2plannedOnly
3plannedAndUnplanned
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.19
fsMIOspfRestartInterval
Configured OSPF graceful restart timeout interval.

This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.
Integer32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.20
fsMIOspfRestartStrictLsaChecking
Indicates if strict LSA checking is enabled for
graceful restart.

This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.21
fsMIOspfRestartStatus
Current status of OSPF graceful restart.
Enumeration
Enumerated Values:
1notRestarting
2plannedRestart
3unplannedRestart
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.22
fsMIOspfRestartAge
Remaining time in current OSPF graceful restart
interval.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.23
fsMIOspfRestartExitReason
Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.24
fsMIOspfHelperSupport
The router.s helper support for OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
fsMIOspfHelperSupport is indicated by bitmap.

This object is persistent…
Bitsr/w
Enumerated Values:
0unknown
1softwareRestart
2swReloadUpgrade
3switchToRedundant
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.25
fsMIOspfExtTraceLevel
This object is used to define level of trace required for OSPF Ext.
Levels are defined as follows.
0x00000100 -- Restart Module.
0x00000200 -- Helper Module.
0x00000400 -- HA Module.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.26
fsMIOspfHelperGraceTimeLimit
Configured OSPF graceful restart interval limit in helper side.
Time is configured in seconds

This object is persistent and when written the entity
SHOULD save the change to non-volatile storage.
Integer32r/w
Constraints:
range: 0-1800
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.27
fsMIOspfRestartAckState
Indicates Reception required / not-required . whether GraceLSAs
sent by this router are expected to be acknowledged by peers.

This object is persistent and when written
the entity SHOULD save the change…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.28
fsMIOspfGraceLsaRetransmitCount
Number of retransmissions for unacknowledged GraceLSAs
Integer32r/w
Constraints:
range: 0-180
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.29
fsMIOspfRestartReason
The router.s restarter reason code of OSPF graceful restart.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant.
This object is persistent and when written
the entity SHOULD save the change to n…
Enumerationr/w
Enumerated Values:
0unknown
1softwareRestart
2swReloadUpgrade
3switchToRedundant
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.30
fsMIOspfRTStaggeringInterval
This object denotes the time interval in milliseconds after which the route
calculation is suspended for doing all other OSPF operations.Default value of
this object is equal to Hello Interval
SNMPv2-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.31
fsMIOspfRouterIdPermanence
This variable displays the status of the ospfRouterId.
'dynamic' and 'permanent' refer to how the ospfRouterId
is derived. This object is used to save and restore the
ospfRouterId value. This object is not confi…
Enumerationr/w
Enumerated Values:
1dynamic
2permanent
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.32
fsMIOspfBfdStatus
This object is to enable/disable BFD feature in OSPF.By default is enabled.
If it is disabled OSPF will not register with BFD for neighbor IP path monitoring
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.33
fsMIOspfBfdAllIfState
This object is to enable/disable BFD for all OSPF interfaces
By default it is disabled. If it is enabled, OSPF will register
with BFD for neighbor IP path monitoring, when the OSPF neighbor state
becomes FULL. Enabling …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.1.3.1.34

fsMIOspfAreaTable

table
.1.3.6.1.4.1.10876.101.1.145.2 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfAreaTable' 
Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.
fsMIOspfAreaEntry row .1.3.6.1.4.1.10876.101.1.145.2.1
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
Indexes
Column Syntax OID
fsMIOspfAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
SUPERMICRO-MISTDOSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.145.2.1.1
fsMIOspfAreaIfCount
This gives the Total no. of Ifaces in the Area
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.2.1.2
fsMIOspfAreaNetCount
This gives the Total no. of Networks in the Area.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.2.1.3
fsMIOspfAreaRtrCount
This gives the Total no. of Routers in the Area.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.2.1.4
fsMIOspfAreaNSSATranslatorRole
Indicate's an NSSA Border router's ability
to perform NSSA Translation of Type-7 LSAs
to Type-5 LSAs.
Enumerationr/w
Enumerated Values:
1always
2candidate
 .1.3.6.1.4.1.10876.101.1.145.2.1.5
fsMIOspfAreaNSSATranslatorState
Indicate's if and how an NSSA Border router is
performing NSSA translation of Type-7 to into Type-5
LSAs.When this object is set to enabled, the NSSA border
router's fsMIOspfAreaNssaTranslatorRole has been set to
always…
Enumeration
Enumerated Values:
1enabled
2elected
3disabled
 .1.3.6.1.4.1.10876.101.1.145.2.1.6
fsMIOspfAreaNSSATranslatorStabilityInterval
The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.
SUPERMICRO-MISTDOSPF-MIBPositiveIntegerr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.10876.101.1.145.2.1.7
fsMIOspfAreaNSSATranslatorEvents
Indicates the number of translator state
changes that have occured since the last boot-up.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.2.1.8
fsMIOspfAreaDfInfOriginate
Indicates the generation default Type-7 LSA.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.2.1.9

fsMIOspfHostTable

table
.1.3.6.1.4.1.10876.101.1.145.3 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfHostTable' 
The list of Hosts, and their metrics, that the
router will advertise as host routes.
fsMIOspfHostEntry row .1.3.6.1.4.1.10876.101.1.145.3.1
A metric to be advertised, for a given type of
service, when a given host is reachable.
Indexes
Column Syntax OID
fsMIOspfHostIpAddress
The IP Address of the Host.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.3.1.1
fsMIOspfHostTOS
The Type of Service of the route being configured.
SUPERMICRO-MISTDOSPF-MIBTOSType
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.10876.101.1.145.3.1.2
fsMIOspfHostRouteIfIndex
The Interface to reach the host
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.3.1.3

fsMIOspfIfTable

table
.1.3.6.1.4.1.10876.101.1.145.4 · 1 row entry · 22 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfIfTable' 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.
fsMIOspfIfEntry row .1.3.6.1.4.1.10876.101.1.145.4.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
Indexes
Column Syntax OID
fsMIOspfIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.4.1.1
fsMIOspfAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.4.1.2
fsMIOspfIfOperState
This gives the Operational Status of the Interface.
Enumeration
Enumerated Values:
1operup
2operdown
3loopback
4unloop
 .1.3.6.1.4.1.10876.101.1.145.4.1.3
fsMIOspfIfPassive
This object is used to make the inteface as passive.
If set to TRUE, then interface will be passive
If set to FALSE then interface will be normal
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.145.4.1.4
fsMIOspfIfNbrCount
This gives the Total number of Neighbour's through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.5
fsMIOspfIfAdjCount
This gives the Total number of Adjacencies through
that Interface.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.6
fsMIOspfIfHelloRcvd
This gives the Total number of Hello packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.7
fsMIOspfIfHelloTxed
This gives the Total number of Hello packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.8
fsMIOspfIfHelloDisd
This gives the Total number of Hello packets
discarded through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.9
fsMIOspfIfDdpRcvd
This gives the Total number of Ddp packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.10
fsMIOspfIfDdpTxed
This gives the Total number of Ddp packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.11
fsMIOspfIfDdpDisd
This gives the Total number of Ddp packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.12
fsMIOspfIfLrqRcvd
This gives the Total number of Lrq packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.13
fsMIOspfIfLrqTxed
This gives the Total number of Lrq packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.14
fsMIOspfIfLrqDisd
This gives the Total number of Lrq packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.15
fsMIOspfIfLsuRcvd
This gives the Total number of Lsu packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.16
fsMIOspfIfLsuTxed
This gives the Total number of Lsu packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.17
fsMIOspfIfLsuDisd
This gives the Total number of Lsu packets discarded
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.18
fsMIOspfIfLakRcvd
This gives the Total number of Lak packets received
through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.19
fsMIOspfIfLakTxed
This gives the Total number of Lak packets
transmitted through that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.20
fsMIOspfIfLakDisd
This gives the Total number of Lak packets discarded
on that Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.4.1.21
fsMIOspfIfBfdState
This object is to enable/disable BFD in a specific OSPF interface.
By default it is disabled. But when fsMIOspfBfdAllIfState is enabled,
internally this object will be enabled for all interface entries.

I…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.4.1.22

fsMIOspfIfMD5AuthTable

table
.1.3.6.1.4.1.10876.101.1.145.5 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfIfMD5AuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfIfMD5AuthTable' 
The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication.
fsMIOspfIfMD5AuthEntry row .1.3.6.1.4.1.10876.101.1.145.5.1
The OSPF Interface MD5 Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
Column Syntax OID
fsMIOspfIfMD5AuthIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.5.1.1
fsMIOspfIfMD5AuthAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.5.1.2
fsMIOspfIfMD5AuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.5.1.3
fsMIOspfIfMD5AuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.145.5.1.4
fsMIOspfIfMD5AuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key. The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.5.1.5
fsMIOspfIfMD5AuthKeyStartGenerate
The time the router will start using this key for packets
generation.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.5.1.6
fsMIOspfIfMD5AuthKeyStopGenerate
The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The
value shown will be configured time + system time at which
the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.5.1.7
fsMIOspfIfMD5AuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.5.1.8
fsMIOspfIfMD5AuthKeyStatus
Identifies the status of the key.
NOTE:invalid (2) currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.10876.101.1.145.5.1.9

fsMIOspfVirtIfMD5AuthTable

table
.1.3.6.1.4.1.10876.101.1.145.6 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfVirtIfMD5AuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfVirtIfMD5AuthTable' 
The OSPF Interface Authentication Table describes the parameters 
required for MD5 cryptographic Authentication.
fsMIOspfVirtIfMD5AuthEntry row .1.3.6.1.4.1.10876.101.1.145.6.1
The OSPF Interface MD5 Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
Column Syntax OID
fsMIOspfVirtIfMD5AuthAreaId
The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0.
SUPERMICRO-MISTDOSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.145.6.1.1
fsMIOspfVirtIfMD5AuthNeighbor
The Router ID of the Virtual Neighbor.
SUPERMICRO-MISTDOSPF-MIBRouterID .1.3.6.1.4.1.10876.101.1.145.6.1.2
fsMIOspfVirtIfMD5AuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.6.1.3
fsMIOspfVirtIfMD5AuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.145.6.1.4
fsMIOspfVirtIfMD5AuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.6.1.5
fsMIOspfVirtIfMD5AuthKeyStartGenerate
The time the router will start using this key for packet
generation.The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.6.1.6
fsMIOspfVirtIfMD5AuthKeyStopGenerate
The time the router will stop using this key for packets
generation. The value -1 indicates infinite lifetime.The value
shown will be configured time + system time at which the value
is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.6.1.7
fsMIOspfVirtIfMD5AuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key. The value -1 indicates infinite
lifetime. The value shown will be configured
time + system time at which the value is configured.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.6.1.8
fsMIOspfVirtIfMD5AuthKeyStatus
Identifies the status of the key.
NOTE: invalid (2) is currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.10876.101.1.145.6.1.9

fsMIOspfNbrTable

table
.1.3.6.1.4.1.10876.101.1.145.7 · 1 row entry · 8 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfNbrTable' 
A table of non-virtual neighbor information.
fsMIOspfNbrEntry row .1.3.6.1.4.1.10876.101.1.145.7.1
The information regarding a single neighbor.
Indexes
Column Syntax OID
fsMIOspfNbrIpAddr
The IP address this neighbor is using in its
IP Source Address. Note that, on addressless
links, this will not be 0.0.0.0, but the ad-
dress of another of the neighbor's interfaces.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.7.1.1
fsMIOspfNbrAddressLessIndex
On an interface having an IP Address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.7.1.2
fsMIOspfNbrDBSummaryQLen
This gives the Que Length of the Database summary List .
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.7.1.3
fsMIOspfNbrLSReqQLen
This gives the Length of Link State Request Que .
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.7.1.4
fsMIOspfNbrRestartHelperStatus
Indicates whether the router is acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.10876.101.1.145.7.1.5
fsMIOspfNbrRestartHelperAge
Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.7.1.6
fsMIOspfNbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.10876.101.1.145.7.1.7
fsMIOspfNbrBfdState
This is a read-only object. This will be enabled internally only when BFD is
enabled for monitoring this neighbor IP path.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.7.1.8

fsMIOspfRoutingTable

table
.1.3.6.1.4.1.10876.101.1.145.8 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfRoutingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfRoutingTable' 
A table of routing information.
fsMIOspfRoutingEntry row .1.3.6.1.4.1.10876.101.1.145.8.1
The information regarding a single route.
Indexes
Column Syntax OID
fsMIOspfRouteIpAddr
IP Address of the route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.8.1.1
fsMIOspfRouteIpAddrMask
IP Address Mask of the route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.8.1.2
fsMIOspfRouteIpTos
IP TOS of the route
SUPERMICRO-MISTDOSPF-MIBTOSType
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.10876.101.1.145.8.1.3
fsMIOspfRouteIpNextHop
IP Next Hop of the route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.8.1.4
fsMIOspfRouteType
Type of the route
Enumeration
Enumerated Values:
1intraArea
2interArea
3type1External
4type2External
 .1.3.6.1.4.1.10876.101.1.145.8.1.5
fsMIOspfRouteAreaId
Area ID associated with the route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.8.1.6
fsMIOspfRouteCost
It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedenc…
SUPERMICRO-MISTDOSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.145.8.1.7
fsMIOspfRouteType2Cost
Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the…
SUPERMICRO-MISTDOSPF-MIBBigMetric
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.145.8.1.8
fsMIOspfRouteInterfaceIndex
Interface Index associated with the route
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.8.1.9

fsMIOspfSecIfTable

table
.1.3.6.1.4.1.10876.101.1.145.9 · 1 row entry · 5 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfSecIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfSecIfTable' 
A table of Secondary IP Address information.
fsMIOspfSecIfEntry row .1.3.6.1.4.1.10876.101.1.145.9.1
The information regarding a single route.
Indexes
Column Syntax OID
fsMIOspfPrimIpAddr
Primary Interface IP Address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.9.1.1
fsMIOspfPrimAddresslessIf
Primary Interface Addressless Index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.9.1.2
fsMIOspfSecIpAddr
Secondary Interface IP Address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.9.1.3
fsMIOspfSecIpAddrMask
Secondary Interface IP Address Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.9.1.4
fsMIOspfSecIfStatus
This variable displays the status of the entry.
Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.145.9.1.5

fsMIOspfAreaAggregateTable

table
.1.3.6.1.4.1.10876.101.1.145.10 · 1 row entry · 5 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfAreaAggregateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfAreaAggregateTable' 
Supports configuration of External Tag for
Type-7 Address ranges configured.
fsMIOspfAreaAggregateEntry row .1.3.6.1.4.1.10876.101.1.145.10.1
Supports configuration of External Tag for
Type-7 Address ranges configured.
Indexes
Column Syntax OID
fsMIOspfAreaAggregateAreaID
The Area the Address Aggregate is to be found
within.
SUPERMICRO-MISTDOSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.145.10.1.1
fsMIOspfAreaAggregateLsdbType
The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.
Enumeration
Enumerated Values:
3summaryLink
7nssaExternalLink
 .1.3.6.1.4.1.10876.101.1.145.10.1.2
fsMIOspfAreaAggregateNet
The IP Address of the Net or Subnet indicated
by the range.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.10.1.3
fsMIOspfAreaAggregateMask
The Subnet Mask that pertains to the Net or
Subnet.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.10.1.4
fsMIOspfAreaAggregateExternalTag
A 32-bit field attached to each external route.
This is not used by OSPF protocol itself. It may
be used to communicate information between AS
boundary routers. The precise nature of this information
is outside the sco…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.10.1.5

fsMIOspfAsExternalAggregationTable

table
.1.3.6.1.4.1.10876.101.1.145.11 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfAsExternalAggregationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfAsExternalAggregationTable' 
Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.
fsMIOspfAsExternalAggregationEntry row .1.3.6.1.4.1.10876.101.1.145.11.1
Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.
Indexes
Column Syntax OID
fsMIOspfAsExternalAggregationNet
The IP address of the Net indicated by
the range.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.11.1.1
fsMIOspfAsExternalAggregationMask
The subnet mask that pertains to the
range.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.11.1.2
fsMIOspfAsExternalAggregationAreaId
Refer to description in fsMIOspfAsExternalAggregationEffect.
SUPERMICRO-MISTDOSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.145.11.1.3
fsMIOspfAsExternalAggregationEffect
Indicates whether Type-5/Type-7 will be aggregated or not
generated for the specified range.
When set to allowAll (3) and associated areaId is 0.0.0.0
aggregated Type-5 are generated for the specified range. In
additio…
Enumerationr/w
Enumerated Values:
1advertise
2doNotAdvertise
3allowAll
4denyAll
 .1.3.6.1.4.1.10876.101.1.145.11.1.4
fsMIOspfAsExternalAggregationTranslation
This when set to enabled, P Bit is set in
the generated Type-7 LSA. When set disabled
P Bit is clear in the generated Type-7 LSA
for the range.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.11.1.5
fsMIOspfAsExternalAggregationStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.145.11.1.6

fsMIOspfOpaqueTable

table
.1.3.6.1.4.1.10876.101.1.145.12.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfOpaqueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfOpaqueTable' 
Information describing the count and check the type 11LSAs.
fsMIOspfOpaqueEntry row .1.3.6.1.4.1.10876.101.1.145.12.1.1.1
Information describing the type 11 LSAs Count and checksum .
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfOpaqueOption
Indicates whether router is Opaque-Capable or not
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.12.1.1.1.1
fsMIOspfType11LsaCount
The number of LS type 11 link-state
advertisements in the link-state database.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.1.1.1.2
fsMIOspfType11LsaCksumSum
The 32-bit unsigned sum of the LS checksums of
the Type 11 link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link sta…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.1.1.1.3
fsMIOspfAreaIDValid
Indicates whether an application is expected to provide
the AreaId, while generating a type-10 opaque LSA. This value
will be true if an application can provide the AreaId otherwise
false. In case of false the Opaque m…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.145.12.1.1.1.4

fsMIOspfOpaqueInterfaceTable

table
.1.3.6.1.4.1.10876.101.1.145.12.2 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfOpaqueInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfOpaqueInterfaceTable' 
Information describing the count and checksum of the Type9 LSAs.
fsMIOspfOpaqueInterfaceEntry row .1.3.6.1.4.1.10876.101.1.145.12.2.1
Information describing the Type 9 LSAs Count and Checksums.
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfOpaqueType9LsaCount
The total number of TYPE 9 Opaque link-state advertisements.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.2.1.1
fsMIOspfOpaqueType9LsaCksumSum
The 32-bit unsigned sum of the link-state ad-
vertisements' TYPE9 Opaque LS checksums.The sum
change in a router's link state data-base, and
to compare the link-state database of the two
routers.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.2.1.2

fsMIOspfType9LsdbTable

table
.1.3.6.1.4.1.10876.101.1.145.12.3 · 1 row entry · 8 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfType9LsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfType9LsdbTable' 
The OSPF Process's TYPE9 Link State Database.
fsMIOspfType9LsdbEntry row .1.3.6.1.4.1.10876.101.1.145.12.3.1
A single Type 9 Link State Advertisement.
Indexes
Column Syntax OID
fsMIOspfType9LsdbIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.1
fsMIOspfType9LsdbOpaqueType
The Opaque type of the LSA.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.2
fsMIOspfType9LsdbLsid
The Link State ID is an LS Type Specific field
containing the Opaque Type and Opaque ID.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.3
fsMIOspfType9LsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SUPERMICRO-MISTDOSPF-MIBRouterID .1.3.6.1.4.1.10876.101.1.145.12.3.1.4
fsMIOspfType9LsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.5
fsMIOspfType9LsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.6
fsMIOspfType9LsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.7
fsMIOspfType9LsdbAdvertisement
The entire TYPE9 Opaque Link State Advertisement,
including its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.145.12.3.1.8

fsMIOspfType11LsdbTable

table
.1.3.6.1.4.1.10876.101.1.145.12.4 · 1 row entry · 7 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfType11LsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfType11LsdbTable' 
The OSPF Process's TYPE11 Links State Database.
fsMIOspfType11LsdbEntry row .1.3.6.1.4.1.10876.101.1.145.12.4.1
A single TYPE11 Opaque Link State Advertisement.
Indexes
Column Syntax OID
fsMIOspfType11LsdbOpaqueType
The Opaquetype of the link state advertisement.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.1
fsMIOspfType11LsdbLsid
The Link State ID identifies the opaque type and
the opaque ID of the received Opaque LSA for an application.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.2
fsMIOspfType11LsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SUPERMICRO-MISTDOSPF-MIBRouterID .1.3.6.1.4.1.10876.101.1.145.12.4.1.3
fsMIOspfType11LsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.4
fsMIOspfType11LsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.5
fsMIOspfType11LsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.6
fsMIOspfType11LsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.145.12.4.1.7

fsMIOspfAppInfoDbTable

table
.1.3.6.1.4.1.10876.101.1.145.12.5 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfAppInfoDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfAppInfoDbTable' 
This table maintains information related to application statistics.
fsMIOspfAppInfoDbEntry row .1.3.6.1.4.1.10876.101.1.145.12.5.1
A single Application's statistical Information.
Indexes
Column Syntax OID
fsMIOspfAppInfoDbAppid
The Application's ID. Each Application has a
unique Appid associated with it.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.1
fsMIOspfAppInfoDbOpaqueType
The OpaqueType of the LSA the application can
generate or receive. Each Application can register
only for a single OpaqueType.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.2
fsMIOspfAppInfoDbLsaTypesSupported
The LSA Types the application can generate is indicated
by a BITMASK.The BITMASK and the interpretation of the
types supported is given as below:-

BitMask TypesSupported
0 0 0 ==> No types
0 0 1 …
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.3
fsMIOspfAppInfoDbType9Gen
The number of Type 9 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type9 LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.4
fsMIOspfAppInfoDbType9Rcvd
The number of Type 9 LSAs received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.5
fsMIOspfAppInfoDbType10Gen
The number of Type 10 LSAs generated by the application.
This field is invalid if the application does not
support the generation of Type10 LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.6
fsMIOspfAppInfoDbType10Rcvd
The number of Type 10 LSAs received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.7
fsMIOspfAppInfoDbType11Gen
The number of Type 11 LSAs generated by the application.
This field is invalid if the application does not support
the generation of Type11 LSAs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.8
fsMIOspfAppInfoDbType11Rcvd
The number of Type 11 LSAs received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.12.5.1.9

fsMIOspfRRDRouteTable

table
.1.3.6.1.4.1.10876.101.1.145.13.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfRRDRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfRRDRouteTable' 
Describes RRDRoute Entry
fsMIOspfRRDRouteEntry row .1.3.6.1.4.1.10876.101.1.145.13.1.1.1
Information describing the RRDRoute
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfRRDStatus
This MIB object enables/disables OSPF to participate in Route
Redistribution. If set to enabled, OSPF will start advertising
the routes learned by other protocols. If set to disabled, OSPF
will stop redisbution of ro…
SUPERMICRO-MISTDOSPF-MIBStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.145.13.1.1.1.1
fsMIOspfRRDSrcProtoMaskEnable
The bit mask of source protocols from which routes are
imported to OSPF.

Bit 1, if set, indicates that local routes are
redistributed into OSPF. (value = 2)

Bit 2, if set, indicates that s…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.13.1.1.1.2
fsMIOspfRRDSrcProtoMaskDisable
The bit mask of source protocols from which redistribution
to OSPF is disabled.

Bit 1, if set, indicates that local routes are not
redistributed into OSPF. (value = 2)

Bit 2, if set, indic…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.13.1.1.1.3
fsMIOspfRRDRouteMapEnable
Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure
the new value.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.10876.101.1.145.13.1.1.1.4

fsMIOspfRRDRouteConfigTable

table
.1.3.6.1.4.1.10876.101.1.145.13.2 · 1 row entry · 7 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfRRDRouteConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfRRDRouteConfigTable' 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
fsMIOspfRRDRouteConfigEntry row .1.3.6.1.4.1.10876.101.1.145.13.2.1
Information describing the configuration of single route entry.
Indexes
Column Syntax OID
fsMIOspfRRDRouteDest
Ip Address of the Destination route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.1
fsMIOspfRRDRouteMask
Mask of the Destination route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.2
fsMIOspfRRDRouteMetric
The Metric value applied to the route before it is adv. into the
OSPF Domain.
SUPERMICRO-MISTDOSPF-MIBBigMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.3
fsMIOspfRRDRouteMetricType
The Metric Type applied to the route before it is adv. into the
OSPF Domain
Enumerationr/w
Enumerated Values:
1asexttype1
2asexttype2
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.4
fsMIOspfRRDRouteTagType
The Tag Type MIB object describes whether Tags will be
automatically generated or will be manually configured.
If tags are manually configured , the fsMIOspfRRDRouteTag
MIB has to be set with the Tag value needed.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.5
fsMIOspfRRDRouteTag
The Route Tag in case the user configures a Manual option for
the tags.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.6
fsMIOspfRRDRouteStatus
The variable dispalys the status of the entry.Setting it to
'invalid' has the effect of rendering it inoperative.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.145.13.2.1.7

fsMIOspfRRDMetricTable

table
.1.3.6.1.4.1.10876.101.1.145.13.3 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfRRDMetricTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfRRDMetricTable' 
A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.
fsMIOspfRRDMerticEntry row .1.3.6.1.4.1.10876.101.1.145.13.3.1
Information describing the configuration of single route entry.
Indexes
Column Syntax OID
fsMIOspfRRDProtocolId
Protocol Id for which the Metric value needs to be changed by the User.
Enumeration
Enumerated Values:
1bgp
2rip
3connected
4static
 .1.3.6.1.4.1.10876.101.1.145.13.3.1.1
fsMIOspfRRDMetricValue
The Metric value to be considered instead of the value given by RTM
for the protocol specified. If the value not secified by the user,
default metric value is considered.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.145.13.3.1.2
fsMIOspfRRDMetricType
The Metric Type to be set for the imported routes.
Enumerationr/w
Enumerated Values:
1type1External
2type2External
 .1.3.6.1.4.1.10876.101.1.145.13.3.1.3

fsMIOspfVirtNbrTable

table
.1.3.6.1.4.1.10876.101.1.145.14 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfVirtNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfVirtNbrTable' 
A table of virtual neighbor information.
fsMIOspfVirtNbrEntry row .1.3.6.1.4.1.10876.101.1.145.14.1
Virtual neighbor information.
Indexes
No indexes recorded
Column Syntax OID
fsMIOspfVirtNbrRestartHelperStatus
Indicates whether the router is acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.10876.101.1.145.14.1.1
fsMIOspfVirtNbrRestartHelperAge
Remaining time in current OSPF graceful restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.145.14.1.2
fsMIOspfVirtNbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a graceful restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.10876.101.1.145.14.1.3

fsMIOspfDistInOutRouteMapTable

table
.1.3.6.1.4.1.10876.101.1.145.15.1 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfDistInOutRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfDistInOutRouteMapTable' 
A table describing the configuration of filtering for route map.
fsMIOspfDistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.145.15.1.1
Information describing the filtering configuration of single entry.
Indexes
Column Syntax OID
fsMIOspfDistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.10876.101.1.145.15.1.1.1
fsMIOspfDistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.10876.101.1.145.15.1.1.3
fsMIOspfDistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.10876.101.1.145.15.1.1.4
fsMIOspfDistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.145.15.1.1.5

fsMIOspfPreferenceTable

table
.1.3.6.1.4.1.10876.101.1.145.16.1 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfPreferenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfPreferenceTable' 
A table describing preference value  for route map.
fsMIOspfPreferenceEntry row .1.3.6.1.4.1.10876.101.1.145.16.1.1
Information describing preference value of single entry.
Indexes
Column Syntax OID
fsMIOspfPreferenceValue
Preference value for OSPF routes. Use '0' to set default value
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.16.1.1.1

fsMIOspfIfAuthTable

table
.1.3.6.1.4.1.10876.101.1.145.17 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfIfAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfIfAuthTable' 
The OSPF Interface Authentication Table describes the parameters
required for the cryptographic Authentication.
fsMIOspfIfAuthEntry row .1.3.6.1.4.1.10876.101.1.145.17.1
The OSPF Interface Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
Column Syntax OID
fsMIOspfIfAuthIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.145.17.1.1
fsMIOspfIfAuthAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.145.17.1.2
fsMIOspfIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.17.1.3
fsMIOspfIfAuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.145.17.1.4
fsMIOspfIfAuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 19…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.17.1.5
fsMIOspfIfAuthKeyStartGenerate
The time the router will start using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM …
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.17.1.6
fsMIOspfIfAuthKeyStopGenerate
The time the router will stop using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM s…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.17.1.7
fsMIOspfIfAuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 199…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.17.1.8
fsMIOspfIfAuthKeyStatus
Identifies the status of the key.
NOTE:invalid (2) currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.10876.101.1.145.17.1.9

fsMIOspfVirtIfAuthTable

table
.1.3.6.1.4.1.10876.101.1.145.18 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIOspfVirtIfAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-OSPFMI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-OSPFMI-MIB::fsMIOspfVirtIfAuthTable' 
The OSPF Interface Authentication Table describes the parameters 
required for  cryptographic Authentication.
fsMIOspfVirtIfAuthEntry row .1.3.6.1.4.1.10876.101.1.145.18.1
The OSPF Interface Auththentication Entry describes one
Authentication Key from the viewpoint of OSPF.
Indexes
Column Syntax OID
fsMIOspfVirtIfAuthAreaId
The Transit Area that the Virtual Link
traverses. By definition, this should not be 0.0.0.0.
SUPERMICRO-MISTDOSPF-MIBAreaID .1.3.6.1.4.1.10876.101.1.145.18.1.1
fsMIOspfVirtIfAuthNeighbor
The Router ID of the Virtual Neighbor.
SUPERMICRO-MISTDOSPF-MIBRouterID .1.3.6.1.4.1.10876.101.1.145.18.1.2
fsMIOspfVirtIfAuthKeyId
This object identifies the secret key used to create the
message digest appended to the OSPF packet.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.145.18.1.3
fsMIOspfVirtIfAuthKey
This is the secret key which is used to create the
message digest appended to the OSPF packet.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.145.18.1.4
fsMIOspfVirtIfAuthKeyStartAccept
The time the router will start accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 19…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.18.1.5
fsMIOspfVirtIfAuthKeyStartGenerate
The time the router will start using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM …
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.18.1.6
fsMIOspfVirtIfAuthKeyStopGenerate
The time the router will stop using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 1992 at 1:30:15 PM s…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.18.1.7
fsMIOspfVirtIfAuthKeyStopAccept
The time the router will stop accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 9999-12-31,23:59:59.0.
For example, Tuesday May 26, 199…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.145.18.1.8
fsMIOspfVirtIfAuthKeyStatus
Identifies the status of the key.
NOTE: invalid (2) is currently not supported
Enumerationr/w
Enumerated Values:
1valid
3delete
 .1.3.6.1.4.1.10876.101.1.145.18.1.9