SUPERMICRO-OSPF-MIB Table View

Information describing the configured parameters 
and cumulative statistics of the router's
   attached areas.

futOspfAreaEntry row .1.3.6.1.4.1.10876.101.1.10.2.1

Information describing the configured parameters
and cumulative statistics of one of the
router's attached areas.

Indexes

futOspfAreaId

Column	Syntax	OID
futOspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.1.10.2.1.1
futOspfAreaIfCount This gives the Total no. of Ifaces in the Area	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.2.1.2
futOspfAreaNetCount This gives the Total no. of Networks in the Area.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.2.1.3
futOspfAreaRtrCount This gives the Total no. of Routers in the Area.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.2.1.4
futOspfAreaNSSATranslatorRole Indicates an NSSA Border router's ability to perform NSSA Translation of Type-7 LSAs to Type-5 LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.10876.101.1.10.2.1.5
futOspfAreaNSSATranslatorState Indicates if and how an NSSA Border router is performing NSSA translation of Type-7 to into Type-5 LSAs.When this object is set to enabled, the NSSA border router's futOspfAreaNssaTranslatorRole has been set to always.W…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.10876.101.1.10.2.1.6
futOspfAreaNSSATranslatorStabilityInterval The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.10876.101.1.10.2.1.7
futOspfAreaNSSATranslatorEvents Indicates the number of translator state changes that have occurred since the last boot-up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.2.1.8
futOspfAreaDfInfOriginate Indicates the generation default Type-7 LSA.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.10.2.1.9

The list of Hosts, and their metrics, that the
router will advertise as host routes.

futOspfHostEntry row .1.3.6.1.4.1.10876.101.1.10.3.1

A metric to be advertised, for a given type of
service, when a given host is reachable.

Indexes

futOspfHostIpAddress futOspfHostTOS

Column	Syntax	OID
futOspfHostIpAddress The IP Address of the Host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.3.1.1
futOspfHostTOS The Type of Service of the route being configured.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.10876.101.1.10.3.1.2
futOspfHostRouteIfIndex The Interface to reach the host	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.3.1.3

The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.

futOspfIfEntry row .1.3.6.1.4.1.10876.101.1.10.4.1

The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.

Indexes

futOspfIfIpAddress futOspfAddressLessIf

Column	Syntax	OID
futOspfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.4.1.1
futOspfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.4.1.2
futOspfIfOperState This gives the Operational Status of the Interface.	Enumeration Enumerated Values: 1 operup 2 operdown 3 loopback 4 unloop	.1.3.6.1.4.1.10876.101.1.10.4.1.3
futOspfIfPassive This object is used to make the interface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.10.4.1.4
futOspfIfNbrCount This gives the Total number of Neighbours through that Interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.5
futOspfIfAdjCount This gives the Total number of Adjacencies through that Interface.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.6
futOspfIfHelloRcvd This gives the Total number of Hello packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.7
futOspfIfHelloTxed This gives the Total number of Hello packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.8
futOspfIfHelloDisd This gives the Total number of Hello packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.9
futOspfIfDdpRcvd This gives the Total number of Ddp packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.10
futOspfIfDdpTxed This gives the Total number of Ddp packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.11
futOspfIfDdpDisd This gives the Total number of Ddp packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.12
futOspfIfLrqRcvd This gives the Total number of Lrq packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.13
futOspfIfLrqTxed This gives the Total number of Lrq packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.14
futOspfIfLrqDisd This gives the Total number of Lrq packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.15
futOspfIfLsuRcvd This gives the Total number of Lsu packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.16
futOspfIfLsuTxed This gives the Total number of Lsu packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.17
futOspfIfLsuDisd This gives the Total number of Lsu packets discarded through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.18
futOspfIfLakRcvd This gives the Total number of Lak packets received through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.19
futOspfIfLakTxed This gives the Total number of Lak packets transmitted through that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.20
futOspfIfLakDisd This gives the Total number of Lak packets discarded on that Interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.4.1.21
futOspfIfBfdState This object is to enable/disable BFD in a specific OSPF interface. By default it is disabled. But when futOspfBfdAllIfState is enabled, internally this object will be enabled for all interface entries. If…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.10.4.1.22

The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication.

futOspfIfMD5AuthEntry row .1.3.6.1.4.1.10876.101.1.10.5.1

The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.

Indexes

futOspfIfMD5AuthIpAddress futOspfIfMD5AuthAddressLessIf futOspfIfMD5AuthKeyId

Column	Syntax	OID
futOspfIfMD5AuthIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.5.1.1
futOspfIfMD5AuthAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.5.1.2
futOspfIfMD5AuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF packet.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.10.5.1.3
futOspfIfMD5AuthKey This is the secret key which is used to create the message digest appended to the OSPF packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.10.5.1.4
futOspfIfMD5AuthKeyStartAccept The time the router will start accepting packets that have been created with this key. The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.5.1.5
futOspfIfMD5AuthKeyStartGenerate The time the router will start using this key for packets generation.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.5.1.6
futOspfIfMD5AuthKeyStopGenerate The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.5.1.7
futOspfIfMD5AuthKeyStopAccept The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.5.1.8
futOspfIfMD5AuthKeyStatus Identifies the status of the key. NOTE:invalid (2) currently not supported	Enumerationr/w Enumerated Values: 1 valid 3 delete	.1.3.6.1.4.1.10876.101.1.10.5.1.9

The OSPF Interface Authentication Table describes the parameters
required for MD5 cryptographic Authentication.

futOspfVirtIfMD5AuthEntry row .1.3.6.1.4.1.10876.101.1.10.6.1

The OSPF Interface MD5 Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.

Indexes

futOspfVirtIfMD5AuthAreaId futOspfVirtIfMD5AuthNeighbor futOspfVirtIfMD5AuthKeyId

Column	Syntax	OID
futOspfVirtIfMD5AuthAreaId The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.1.10.6.1.1
futOspfVirtIfMD5AuthNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.1.10.6.1.2
futOspfVirtIfMD5AuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF packet.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.10.6.1.3
futOspfVirtIfMD5AuthKey This is the secret key which is used to create the message digest appended to the OSPF packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.10.6.1.4
futOspfVirtIfMD5AuthKeyStartAccept The time the router will start accepting packets that have been created with this key.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.6.1.5
futOspfVirtIfMD5AuthKeyStartGenerate The time the router will start using this key for packet generation.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.6.1.6
futOspfVirtIfMD5AuthKeyStopGenerate The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.6.1.7
futOspfVirtIfMD5AuthKeyStopAccept The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime. The value shown will be configured time + system time at which the value is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.6.1.8
futOspfVirtIfMD5AuthKeyStatus Identifies the status of the key. NOTE: invalid (2) is currently not supported	Enumerationr/w Enumerated Values: 1 valid 3 delete	.1.3.6.1.4.1.10876.101.1.10.6.1.9

A table of non-virtual neighbor information.

futOspfNbrEntry row .1.3.6.1.4.1.10876.101.1.10.7.1

The information regarding a single neighbor.

Indexes

futOspfNbrIpAddr futOspfNbrAddressLessIndex

Column	Syntax	OID
futOspfNbrIpAddr The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.7.1.1
futOspfNbrAddressLessIndex On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.7.1.2
futOspfNbrDBSummaryQLen This gives the queue Length of the Database summary List .	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.7.1.3
futOspfNbrLSReqQLen This gives the Length of Link State Request Queue .	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.7.1.4
futOspfNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.10876.101.1.10.7.1.5
futOspfNbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.7.1.6
futOspfNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.10876.101.1.10.7.1.7
futOspfNbrBfdState This is a read-only object. This will be enabled internally only when BFD is enabled for monitoring this neighbor IP path.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.10.7.1.8

A table of routing information.

futOspfRoutingEntry row .1.3.6.1.4.1.10876.101.1.10.8.1

The information regarding a single route.

Indexes

futOspfRouteIpAddr futOspfRouteIpAddrMask futOspfRouteIpTos futOspfRouteIpNextHop

Column	Syntax	OID
futOspfRouteIpAddr IP Address of the route	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.8.1.1
futOspfRouteIpAddrMask IP Address Mask of the route	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.8.1.2
futOspfRouteIpTos IP TOS of the route	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.10876.101.1.10.8.1.3
futOspfRouteIpNextHop IP Next Hop of the route	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.8.1.4
futOspfRouteType Type of the route	Enumeration Enumerated Values: 1 intraArea 2 interArea 3 type1External 4 type2External	.1.3.6.1.4.1.10876.101.1.10.8.1.5
futOspfRouteAreaId Area ID associated with the route	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.8.1.6
futOspfRouteCost It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost are present, Type1 external metrics always take precedenc…	OSPF-MIBBigMetric Type Constraints: range: 0..16777215	.1.3.6.1.4.1.10876.101.1.10.8.1.7
futOspfRouteType2Cost Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS is the major cost of routing a packet, and eliminates the…	OSPF-MIBBigMetric Type Constraints: range: 0..16777215	.1.3.6.1.4.1.10876.101.1.10.8.1.8
futOspfRouteInterfaceIndex Interface Index associated with the route	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.1.10.8.1.9

A table of Secondary IP Address information.

futOspfSecIfEntry row .1.3.6.1.4.1.10876.101.1.10.9.1

The information regarding a single route.

Indexes

futOspfPrimIpAddr futOspfPrimAddresslessIf futOspfSecIpAddr futOspfSecIpAddrMask

Column	Syntax	OID
futOspfPrimIpAddr Primary Interface IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.9.1.1
futOspfPrimAddresslessIf Primary Interface Addressless Index.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.9.1.2
futOspfSecIpAddr Secondary Interface IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.9.1.3
futOspfSecIpAddrMask Secondary Interface IP Address Mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.9.1.4
futOspfSecIfStatus This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.10.9.1.5

Supports configuration of External Tag for
Type-7 Address ranges configured.

futOspfAreaAggregateEntry row .1.3.6.1.4.1.10876.101.1.10.10.1

Supports configuration of External Tag for
Type-7 Address ranges configured.

Indexes

futOspfAreaAggregateAreaID futOspfAreaAggregateLsdbType futOspfAreaAggregateNet futOspfAreaAggregateMask

Column	Syntax	OID
futOspfAreaAggregateAreaID The Area the Address Aggregate is to be found within.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.1.10.10.1.1
futOspfAreaAggregateLsdbType The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.	Enumeration Enumerated Values: 3 summaryLink 7 nssaExternalLink	.1.3.6.1.4.1.10876.101.1.10.10.1.2
futOspfAreaAggregateNet The IP Address of the Net or Subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.10.1.3
futOspfAreaAggregateMask The Subnet Mask that pertains to the Net or Subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.10.1.4
futOspfAreaAggregateExternalTag A 32-bit field attached to each external route. This is not used by OSPF protocol itself. It may be used to communicate information between AS boundary routers. The precise nature of this information is outside the sco…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.10.1.5

Indicates whether for the specified address range
Type-7/Type-5 LSA will be aggregated or not generated.

futOspfAsExternalAggregationEntry row .1.3.6.1.4.1.10876.101.1.10.11.1

Supports configuration of Type-5,Type-7 Address Range specifying
whether for the configured range, Type-5,Type-7 LSA will be
generated or not, and if generated whether aggregation is performed.

Indexes

futOspfAsExternalAggregationNet futOspfAsExternalAggregationMask futOspfAsExternalAggregationAreaId

Column	Syntax	OID
futOspfAsExternalAggregationNet The IP address of the Net indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.11.1.1
futOspfAsExternalAggregationMask The subnet mask that pertains to the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.11.1.2
futOspfAsExternalAggregationAreaId Refer to description in futOspfAsExternalAggregationEffect.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.1.10.11.1.3
futOspfAsExternalAggregationEffect Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to allowAll (3) and associated areaId is 0.0.0.0 aggregated Type-5 are generated for the specified range. In additio…	Enumerationr/w Enumerated Values: 1 advertise 2 doNotAdvertise 3 allowAll 4 denyAll	.1.3.6.1.4.1.10876.101.1.10.11.1.4
futOspfAsExternalAggregationTranslation This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.10.11.1.5
futOspfAsExternalAggregationStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.10.11.1.6

Information describing the count and checksum of the Type9 LSAs.

futOspfOpaqueInterfaceEntry row .1.3.6.1.4.1.10876.101.1.10.12.2.1

Information describing the Type 9 LSAs Count and Checksums.

Indexes

No indexes recorded

Column	Syntax	OID
futOspfOpaqueType9LsaCount The total number of TYPE 9 Opaque link-state advertisements.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.2.1.1
futOspfOpaqueType9LsaCksumSum The 32-bit unsigned sum of the link-state ad- vertisements' TYPE9 Opaque LS checksums.The sum change in a router's link state data-base, and to compare the link-state database of the two routers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.2.1.2

The OSPF Process's TYPE9 Link State Database.

futOspfType9LsdbEntry row .1.3.6.1.4.1.10876.101.1.10.12.3.1

A single Type 9 Link State Advertisement.

Indexes

futOspfType9LsdbIfIpAddress futOspfType9LsdbOpaqueType futOspfType9LsdbLsid futOspfType9LsdbRouterId

Column	Syntax	OID
futOspfType9LsdbIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.12.3.1.1
futOspfType9LsdbOpaqueType The Opaque type of the LSA.	Integer32 Constraints: range: 1-11	.1.3.6.1.4.1.10876.101.1.10.12.3.1.2
futOspfType9LsdbLsid The Link State ID is an LS Type Specific field containing the Opaque Type and Opaque ID.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.12.3.1.3
futOspfType9LsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.1.10.12.3.1.4
futOspfType9LsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.3.1.5
futOspfType9LsdbAge This field is the age of the link state adver- tisement in seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.3.1.6
futOspfType9LsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.3.1.7
futOspfType9LsdbAdvertisement The entire TYPE9 Opaque Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.10.12.3.1.8

The OSPF Process's TYPE11 Links State Database.

futOspfType11LsdbEntry row .1.3.6.1.4.1.10876.101.1.10.12.4.1

A single TYPE11 Opaque Link State Advertisement.

Indexes

futOspfType11LsdbOpaqueType futOspfType11LsdbLsid futOspfType11LsdbRouterId

Column	Syntax	OID
futOspfType11LsdbOpaqueType The Opaquetype of the link state advertisement.	Integer32 Constraints: range: 1-11	.1.3.6.1.4.1.10876.101.1.10.12.4.1.1
futOspfType11LsdbLsid The Link State ID identifies the opaque type and the opaque ID of the received Opaque LSA for an application.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.12.4.1.2
futOspfType11LsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.1.10.12.4.1.3
futOspfType11LsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.4.1.4
futOspfType11LsdbAge This field is the age of the link state adver- tisement in seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.4.1.5
futOspfType11LsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.10.12.4.1.6
futOspfType11LsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.10.12.4.1.7

This table maintains information related to application statistics.

futOspfAppInfoDbEntry row .1.3.6.1.4.1.10876.101.1.10.12.5.1

A single Application's statistical Information.

Indexes

futOspfAppInfoDbAppid

Column	Syntax	OID
futOspfAppInfoDbAppid The Application's ID. Each Application has a unique Appid associated with it.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.10.12.5.1.1
futOspfAppInfoDbOpaqueType The OpaqueType of the LSA the application can generate or receive. Each Application can register only for a single OpaqueType.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.10.12.5.1.2
futOspfAppInfoDbLsaTypesSupported The LSA Types the application can generate is indicated by a BITMASK.The BITMASK and the interpretation of the types supported is given as below:- BitMask TypesSupported 0 0 0 ==> No types 0 0 1 …	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.10.12.5.1.3
futOspfAppInfoDbType9Gen The number of Type 9 LSAs generated by the application. This field is invalid if the application does not support the generation of Type9 LSAs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.4
futOspfAppInfoDbType9Rcvd The number of Type 9 LSAs received by the application.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.5
futOspfAppInfoDbType10Gen The number of Type 10 LSAs generated by the application. This field is invalid if the application does not support the generation of Type10 LSAs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.6
futOspfAppInfoDbType10Rcvd The number of Type 10 LSAs received by the application.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.7
futOspfAppInfoDbType11Gen The number of Type 11 LSAs generated by the application. This field is invalid if the application does not support the generation of Type11 LSAs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.8
futOspfAppInfoDbType11Rcvd The number of Type 11 LSAs received by the application.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.12.5.1.9

A table describing the configuration of Metric Cost and Route
Type information to be applied to the routes learnt from the RTM.

futOspfRRDRouteConfigEntry row .1.3.6.1.4.1.10876.101.1.10.13.2.1

Information describing the configuration of single route entry.

Indexes

futOspfRRDRouteDest futOspfRRDRouteMask

Column	Syntax	OID
futOspfRRDRouteDest Ip Address of the Destination route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.13.2.1.1
futOspfRRDRouteMask Mask of the Destination route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.13.2.1.2
futOspfRRDRouteMetric The Metric value applied to the route before it is adv. into the OSPF Domain.	OSPF-MIBBigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.10876.101.1.10.13.2.1.3
futOspfRRDRouteMetricType The Metric Type applied to the route before it is adv. into the OSPF Domain	Enumerationr/w Enumerated Values: 1 asexttype1 2 asexttype2	.1.3.6.1.4.1.10876.101.1.10.13.2.1.4
futOspfRRDRouteTagType The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the futospfRRDRouteTag MIB has to be set with the Tag value needed.	Enumerationr/w Enumerated Values: 1 manual 2 automatic	.1.3.6.1.4.1.10876.101.1.10.13.2.1.5
futOspfRRDRouteTag The Route Tag in case the user configures a Manual option for the tags.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.13.2.1.6
futOspfRRDRouteStatus The variable displays the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.10.13.2.1.7

A table of virtual neighbor information.

futOspfVirtNbrEntry row .1.3.6.1.4.1.10876.101.1.10.14.1

Virtual neighbor information.

Indexes

No indexes recorded

Column	Syntax	OID
futOspfVirtNbrRestartHelperStatus Indicates whether the router is acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 notHelping 2 helping	.1.3.6.1.4.1.10876.101.1.10.14.1.1
futOspfVirtNbrRestartHelperAge Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.10.14.1.2
futOspfVirtNbrRestartHelperExitReason Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.	Enumeration Enumerated Values: 1 none 2 inProgress 3 completed 4 timedOut 5 topologyChanged	.1.3.6.1.4.1.10876.101.1.10.14.1.3

A table describing the configuration of filtering for route map.

futOspfDistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.10.15.1.1

Information describing the filtering configuration of single entry.

Indexes

futOspfDistInOutRouteMapName futOspfDistInOutRouteMapType

Column	Syntax	OID
futOspfDistInOutRouteMapName Route map name.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.10876.101.1.10.15.1.1.1
futOspfDistInOutRouteMapType Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.10876.101.1.10.15.1.1.3
futOspfDistInOutRouteMapValue Distance value ( this will be unused for distribute list )	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.10876.101.1.10.15.1.1.4
futOspfDistInOutRouteMapRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.10.15.1.1.5

The OSPF Interface Authentication Table describes the parameters
required for  cryptographic Authentication.

futOspfIfAuthEntry row .1.3.6.1.4.1.10876.101.1.10.17.1

The OSPF Interface Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.

Indexes

futOspfIfAuthIpAddress futOspfIfAuthAddressLessIf futOspfIfAuthKeyId

Column	Syntax	OID
futOspfIfAuthIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.10.17.1.1
futOspfIfAuthAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.10.17.1.2
futOspfIfAuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF packet.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.10.17.1.3
futOspfIfAuthKey This is the secret key which is used to create the message digest appended to the OSPF packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.10.17.1.4
futOspfIfAuthKeyStartAccept The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 19…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.17.1.5
futOspfIfAuthKeyStartGenerate The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 1992 at 1:30:15 PM …	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.17.1.6
futOspfIfAuthKeyStopGenerate The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 1992 at 1:30:15 PM s…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.17.1.7
futOspfIfAuthKeyStopAccept The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 199…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.17.1.8
futOspfIfAuthKeyStatus Identifies the status of the key. NOTE:invalid (2) currently not supported	Enumerationr/w Enumerated Values: 1 valid 3 delete	.1.3.6.1.4.1.10876.101.1.10.17.1.9

The OSPF Interface Authentication Table describes the parameters
required for cryptographic Authentication.

futOspfVirtIfAuthEntry row .1.3.6.1.4.1.10876.101.1.10.18.1

The OSPF Interface Authentication Entry describes one
Authentication Key from the viewpoint of OSPF.

Indexes

futOspfVirtIfAuthAreaId futOspfVirtIfAuthNeighbor futOspfVirtIfAuthKeyId

Column	Syntax	OID
futOspfVirtIfAuthAreaId The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0.	OSPF-MIBAreaID	.1.3.6.1.4.1.10876.101.1.10.18.1.1
futOspfVirtIfAuthNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.10876.101.1.10.18.1.2
futOspfVirtIfAuthKeyId This object identifies the secret key used to create the message digest appended to the OSPF packet.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.10.18.1.3
futOspfVirtIfAuthKey This is the secret key which is used to create the message digest appended to the OSPF packet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.10.18.1.4
futOspfVirtIfAuthKeyStartAccept The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 19…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.18.1.5
futOspfVirtIfAuthKeyStartGenerate The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 1992 at 1:30:15 PM …	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.18.1.6
futOspfVirtIfAuthKeyStopGenerate The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 1992 at 1:30:15 PM s…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.18.1.7
futOspfVirtIfAuthKeyStopAccept The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:59:59.0. For example, Tuesday May 26, 199…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.10.18.1.8
futOspfVirtIfAuthKeyStatus Identifies the status of the key. NOTE: invalid (2) is currently not supported	Enumerationr/w Enumerated Values: 1 valid 3 delete	.1.3.6.1.4.1.10876.101.1.10.18.1.9

A table which holds the crypto authentication type.This must be configured
for SHA-1 / SHA-2 authentication to be enabled.

futOspfIfCryptoAuthEntry row .1.3.6.1.4.1.10876.101.1.10.19.1

Describes the cryptographic authentication.

Indexes

No indexes recorded

Column	Syntax	OID
futOspfIfCryptoAuthType Crypto authentication type to be used on the interface. This object should be used to set SHA authentication along with ospfIfAuthType in stdospf.mib	Enumerationr/w Enumerated Values: 1 md5 2 sha1 3 sha224 4 sha256 5 sha384 6 sha512	.1.3.6.1.4.1.10876.101.1.10.19.1.1

A table which holds the crypto authentication type.

futOspfVirtIfCryptoAuthEntry row .1.3.6.1.4.1.10876.101.1.10.20.1

Describes the cryptographic authentication.

Indexes

No indexes recorded

Column	Syntax	OID
futOspfVirtIfCryptoAuthType Crypto authentication type to be used on the interface This object should be used to set SHA authentication along with ospfVirtIfAuthType in stdospf.mib	Enumerationr/w Enumerated Values: 1 md5 2 sha1 3 sha224 4 sha256 5 sha384 6 sha512	.1.3.6.1.4.1.10876.101.1.10.20.1.1