SUPERMICRO-MIVlan-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
97

fsMIDot1qFutureVlanGlobalsTable

table
.1.3.6.1.4.1.10876.101.1.120.1.2 · 1 row entry · 20 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanGlobalsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanGlobalsTable' 
List of per virtual context Vlan Module Parameters.
fsMIDot1qFutureVlanGlobalsEntry row .1.3.6.1.4.1.10876.101.1.120.1.2.1
Per virtual context Vlan module parmaters.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanContextId
Identifies the virtual context in the system.
Integer32 .1.3.6.1.4.1.10876.101.1.120.1.2.1.1
fsMIDot1qFutureVlanStatus
The administrative status requested by management for the Vlan
feature. The value enabled(1) indicates that Vlan should be enabled
in the device on all ports. The value disabled(2) indicates that
Vlan should be disa…
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.2
fsMIDot1qFutureVlanMacBasedOnAllPorts
This object is only used to enable/disable the mac based type on all
ports of fsMIDot1qFutureVlanPortMacBasedClassification
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.3
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts
This object is only used to enable/disable the port protocol based
type on all ports of
fsMIDot1qFutureVlanPortPortProtoBasedClassification
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.4
fsMIDot1qFutureVlanShutdownStatus
The administrative shutdown status requested by management for Vlan
The value true(1) indicates that Vlan should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates tha…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.5
fsMIDot1qFutureGarpShutdownStatus
The administrative status requested by management for GARP
The value true(1) indicates that GARP should be shutdown
in the device on all ports. All memory will be released.
The value false(2) indicates that GARP sh…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.6
fsMIDot1qFutureVlanDebug
Enables the tracing in the selected submodule in VLAN. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - M…
Integer32r/w .1.3.6.1.4.1.10876.101.1.120.1.2.1.7
fsMIDot1qFutureVlanLearningMode
The Type of VLAN learning mode.
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast configurations
associated with old fid will get deleted.
Enumeration .1.3.6.1.4.1.10876.101.1.120.1.2.1.8
fsMIDot1qFutureVlanHybridTypeDefault
The default learning mode of the switch if
fsMIDot1qFutureVlanLearningMode is hvl (3).
When the object value is modified, the static
fid-vlan mappings and static unicast entries
need to be reconfigured. Static unicast …
Enumeration .1.3.6.1.4.1.10876.101.1.120.1.2.1.9
fsMIDot1qFutureVlanOperStatus
The operational status of the Vlan module.
The value enabled(1) indicates that Vlan module is currently enabled
in the device.
The value disabled(2) indicates that Vlan module is currently disabled
in the device.
EnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.10
fsMIDot1qFutureGvrpOperStatus
The operational status of the GVRP module.
The value enabled(1) indicates that GVRP module is currently enabled
in the device.
The value disabled(2) indicates that GVRP module is currently disabled
in the device.
EnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.11
fsMIDot1qFutureGmrpOperStatus
The operational status of the GMRP module.
The value enabled(1) indicates that GMRP module is currently enabled
in the device.
The value disabled(2) indicates that GMRP module is currently disabled
in the device.
EnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.12
fsMIDot1qFutureVlanContextName
The name of the virtual context.
OctetString .1.3.6.1.4.1.10876.101.1.120.1.2.1.13
fsMIDot1qFutureGarpDebug
Enables the tracing in the selected submodule in GARP. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - M…
Integer32r/w .1.3.6.1.4.1.10876.101.1.120.1.2.1.14
fsMIDot1qFutureUnicastMacLearningLimit
The Limiting value on the number of distinct unicast MAC addresses
that can be learnt in the specified virtual context.

The upper limit value that can be SET for this object is determined
by the underlyi…
Unsigned32r/w .1.3.6.1.4.1.10876.101.1.120.1.2.1.15
fsMIDot1qFutureBaseBridgeMode
This object indicates Base Bridge-Mode of the Switch.
Setting the value to transparent mode will make
switch behave according to IEEE 802.1d implementation.
Setting the value to VLAN mode will make switch behave
accordi…
Enumerationr/w .1.3.6.1.4.1.10876.101.1.120.1.2.1.16
fsMIDot1qFutureVlanSubnetBasedOnAllPorts
This object is used to enable/disable the subnet based VLAN Classification
on all ports of dot1qFutureVlanPortSubnetBasedClassification. On setting
this object to enable/disable status, Subnet based VLAN classification …
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.17
fsMIDot1qFutureVlanGlobalMacLearningStatus
This object specifies the global MAC learning status of the
switch. The default value of global mac learning status of
the switch is enabled.
This object can take only two values enabled or disabled.
The value as speci…
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.18
fsMIDot1qFutureVlanApplyEnhancedFilteringCriteria
If this object is set as 'false', then only default filtering
utility criteria will be applied on all ports in this context.
Otherwise the filtering criteria to be used for the ports in this
context will be taken from f…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.19
fsMIDot1qFutureVlanGlobalsFdbFlush
If this object is set as 'true', then all the dynamically learnt
MAC addresses in this context are removed.After flush this object
is set to 'false'
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.2.1.20

fsMIDot1qFutureVlanPortTable

table
.1.3.6.1.4.1.10876.101.1.120.1.3 · 1 row entry · 34 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanPortTable' 
Table containing the port type information.
fsMIDot1qFutureVlanPortEntry row .1.3.6.1.4.1.10876.101.1.120.1.3.1
Entry indicating the type of the port.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanPort
The port number of the port for which this entry applies.
Integer32 .1.3.6.1.4.1.10876.101.1.120.1.3.1.1
fsMIDot1qFutureVlanPortType
The type of the port is by default hybrid port.
When configured as access port, the port can accept and send
only untagged frames.
When configured as a trunk port, port is added as
member of all the existing Vlans an…
Enumerationr/w .1.3.6.1.4.1.10876.101.1.120.1.3.1.2
fsMIDot1qFutureVlanPortPortProtoBasedClassification
Object to expilicitly enable/disable the port and protocol
Classification on port. This can be independently set without
any dependency in available configuration of
fsMIDot1qFutureVlanPortProtoBasedOnAllPorts
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.4
fsMIDot1qFutureVlanFilteringUtilityCriteria
Based on this object, learning on a port is decided.

If default filtering utility Criteria is selected on a port, then
learning of source mac from a received packet on that port will be
done only if there…
Enumerationr/w .1.3.6.1.4.1.10876.101.1.120.1.3.1.5
fsMIDot1qFutureVlanPortProtected
The Split Horizon property of the port. If set to true, frames that
are received on any other port, that has the same property set to true,
will not be forwarded on this port.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.6
fsMIDot1qFutureVlanPortUnicastMacLearning
A Truth value indicating the unicast MAC learning enabled/disabled
status for this port.
When Unicast Mac Learning is disabled,
no unicast mac entry will be learnt on this port.
When Mac Learning is enabled, unicast m…
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.8
fsMIDot1qFutureVlanPortGmrpJoinEmptyTxCount
Number of Gmrp Join Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.9
fsMIDot1qFutureVlanPortGmrpJoinEmptyRxCount
Number of Gmrp Join Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.10
fsMIDot1qFutureVlanPortGmrpJoinInTxCount
Number of Gmrp Join In packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.11
fsMIDot1qFutureVlanPortGmrpJoinInRxCount
Number of Gmrp Join In packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.12
fsMIDot1qFutureVlanPortGmrpLeaveInTxCount
Number of Gmrp Leave In packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.13
fsMIDot1qFutureVlanPortGmrpLeaveInRxCount
Number of Gmrp Leave In packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.14
fsMIDot1qFutureVlanPortGmrpLeaveEmptyTxCount
Number of Gmrp Leave Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.15
fsMIDot1qFutureVlanPortGmrpLeaveEmptyRxCount
Number of Gmrp Leave Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.16
fsMIDot1qFutureVlanPortGmrpEmptyTxCount
Number of Gmrp Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.17
fsMIDot1qFutureVlanPortGmrpEmptyRxCount
Number of Gmrp Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.18
fsMIDot1qFutureVlanPortGmrpLeaveAllTxCount
Number of Gmrp Leave All packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.19
fsMIDot1qFutureVlanPortGmrpLeaveAllRxCount
Number of Gmrp Leave All packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.20
fsMIDot1qFutureVlanPortGmrpDiscardCount
Number of Gmrp packets discarded in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.21
fsMIDot1qFutureVlanPortGvrpJoinEmptyTxCount
Number of Gvrp Join Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.22
fsMIDot1qFutureVlanPortGvrpJoinEmptyRxCount
Number of Gvrp Join Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.23
fsMIDot1qFutureVlanPortGvrpJoinInTxCount
Number of Gvrp Join In packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.24
fsMIDot1qFutureVlanPortGvrpJoinInRxCount
Number of Gvrp Join In packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.25
fsMIDot1qFutureVlanPortGvrpLeaveInTxCount
Number of Gvrp Leave In packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.26
fsMIDot1qFutureVlanPortGvrpLeaveInRxCount
Number of Gvrp Leave In packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.27
fsMIDot1qFutureVlanPortGvrpLeaveEmptyTxCount
Number of Gvrp Leave Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.28
fsMIDot1qFutureVlanPortGvrpLeaveEmptyRxCount
Number of Gvrp Leave Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.29
fsMIDot1qFutureVlanPortGvrpEmptyTxCount
Number of Gvrp Empty packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.30
fsMIDot1qFutureVlanPortGvrpEmptyRxCount
Number of Gvrp Empty packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.31
fsMIDot1qFutureVlanPortGvrpLeaveAllTxCount
Number of Gvrp Leave All packets transmitted by this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.32
fsMIDot1qFutureVlanPortGvrpLeaveAllRxCount
Number of Gvrp Leave All packets received on this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.33
fsMIDot1qFutureVlanPortGvrpDiscardCount
Number of Gvrp packets discarded in this port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.34
fsMIDot1qFutureVlanPortFdbFlush
If this object is set as 'true', then all the dynamically
learnt MAC addresses on the specified interface are removed.
After flush this object is set to 'false'
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.3.1.35
fsMIDot1qFutureVlanPortAllowedVlanList
A string of octets containing one bit per vlan.
Specifies the vlans which the trunk port can add to.
By default all vlans are allowed to add the trunk ports.

If a set of vlans are configured in the 'VlanL…
OctetStringr/w .1.3.6.1.4.1.10876.101.1.120.1.3.1.36

fsMIDot1qFutureVlanPortMacMapTable

table
.1.3.6.1.4.1.10876.101.1.120.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanPortMacMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanPortMacMapTable' 
A table that contains information on Vlan-MAC address 
mapping. This table maintains context ID as one more 
index to support Multiple Instances.
fsMIDot1qFutureVlanPortMacMapEntry row .1.3.6.1.4.1.10876.101.1.120.1.4.1
Entry that contains Vlan-MAC address mapping.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanPortMacMapAddr
The Mac address for which the Vlan mapping is present in the entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.1.120.1.4.1.1
fsMIDot1qFutureVlanPortMacMapVid
The Vlan to which the mac address of this entry is mapped to.
VlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.10876.101.1.120.1.4.1.2
fsMIDot1qFutureVlanPortMacMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.120.1.4.1.5

fsMIDot1qFutureVlanFidMapTable

table
.1.3.6.1.4.1.10876.101.1.120.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanFidMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanFidMapTable' 
This table contains information about the Filtering database 
identifier (FID) used by vlan's to make forwarding decisions. Vlan's 
can be mapped to use the same FID to share filtering information among 
them. This will cause the mapped vlan's to operate in shared vlan 
learning (SVL) mode. Vlan's mapped to a unique FID will operate in 
independent vlan learning mode (IVL). A SET operation on this table is 
allowed only when fsMIDot1qFutureVlanLearningMode is hybrid. By 
default all vlan's will be mapped to the FID equal to their vlan id 
when fsMIDot1qFutureVlanHybridTypeDefault is IVL. If the value of 
fsMIDot1qFutureVlanHybridTypeDefault is SVL all vlan's are mapped to 
filtering database id 1. This table maintains context ID as one more 
index to support Multiple Instances.
fsMIDot1qFutureVlanFidMapEntry row .1.3.6.1.4.1.10876.101.1.120.1.5.1
Entry mapping VlanId to Filtering database id.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanIndex
VLAN ID for which filtering database information is available.
Unsigned32 .1.3.6.1.4.1.10876.101.1.120.1.5.1.1
fsMIDot1qFutureVlanFid
The Filtering database id (FID) that will be used by the vlan.
Unsigned32r/w .1.3.6.1.4.1.10876.101.1.120.1.5.1.2

fsMIDot1qFutureVlanCounterTable

table
.1.3.6.1.4.1.10876.101.1.120.1.6 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanCounterTable' 
The table contains the statistics on a per VLAN basis.
It contains number of unicast, broadcast and unknown unicast
packets flooded per VLAN.
fsMIDot1qFutureVlanCounterEntry row .1.3.6.1.4.1.10876.101.1.120.1.6.1
The entry contains the VLAN statistics
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanCounterRxUcast
Number of unicast packets received in this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.1
fsMIDot1qFutureVlanCounterRxMcastBcast
Number of multicast/broadcast packets received in this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.2
fsMIDot1qFutureVlanCounterTxUnknUcast
Number of unknown unicast packets flooded in this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.3
fsMIDot1qFutureVlanCounterTxUcast
Number of known unicast packets forwarded in this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.4
fsMIDot1qFutureVlanCounterTxBcast
Number of broadcast packets forwarded in this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.5
fsMIDot1qFutureVlanCounterStatus
A Truth value indicating the statistics collection is enabled/disabled
for this vlan.

When statistics collection is set to disabled, Vlan stops collecting
statistics on this specific vlan.
When statistics…
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.6.1.6

fsMIDot1qFutureVlanUnicastMacControlTable

table
.1.3.6.1.4.1.10876.101.1.120.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanUnicastMacControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanUnicastMacControlTable' 
A table containing per VLAN Unicast MAC address control information. 
The control information includes the status of unicast MAC address 
learning as well as restricting the number of unique entries learnt to 
a specified limit for the specified VLAN. The control set for the VLAN 
is applicable only for the virtual context identified by the virtual 
context identifier in this entry.
fsMIDot1qFutureVlanUnicastMacControlEntry row .1.3.6.1.4.1.10876.101.1.120.1.7.1
Information controlling the number of distinct unicast MAC addresses
that can be learnt in a VLAN for a virtual context depending on whether
learning is enabled or disabled for the VLAN. The virtual
context is identif…
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanUnicastMacLimit
The Limiting value on the number of distinct unicast MAC addresses
learned in the VLAN in this specified virtual context.

The lower limit and upper limit value that can be SET for this object
is determin…
Unsigned32r/w .1.3.6.1.4.1.10876.101.1.120.1.7.1.1
fsMIDot1qFutureVlanAdminMacLearningStatus
A Truth value used to configure the unicast MAC learning Admin status
for the VLAN in this specified virtual context to either be enabled (1)
or disabled (2) or default (3), Configuring this object to default
behaviou…
MacLearningStatusr/w
Type Values:
1enabled
2disabled
3default
 .1.3.6.1.4.1.10876.101.1.120.1.7.1.2
fsMIDot1qFutureVlanOperMacLearningStatus
A Truth value indicating the unicast MAC learning enabled/disabled
Operational status for the VLAN in this specified virtual context.
If the VLAN is a Point-point service, then the Mac Learning Status
for this VLAN wil…
EnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.1.7.1.3

fsMIDot1qFutureVlanTpFdbTable

table
.1.3.6.1.4.1.10876.101.1.120.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanTpFdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanTpFdbTable' 
A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame. This table maintains context ID
as one more index to support Multiple Instances.
fsMIDot1qFutureVlanTpFdbEntry row .1.3.6.1.4.1.10876.101.1.120.1.9.1
Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanOldTpFdbPort
This object is useful for generating the source relearning trap.
When a get is performed on this object, it returns the value of
Zero(0), so that ISS walk doesn't break. It indicates the port
through which the mac-addr…
Integer32 .1.3.6.1.4.1.10876.101.1.120.1.9.1.1
fsMIDot1qFutureConnectionIdentifier
This object is to associate the backbone MAC address of the peer
backbone edge brige with customer Mac addresses that can be reached
through the peer backbone edge bridge.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.1.120.1.9.1.2

fsMIDot1qFutureVlanWildCardTable

table
.1.3.6.1.4.1.10876.101.1.120.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanWildCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanWildCardTable' 
Wild card vlan (Id : 0xFFF) static filtering information 
will be used for all Vlans for which there is no specific 
Static filtering exists in dot1qStaticUnicastTable or 
dot1qStaticMulticastTable.
fsMIDot1qFutureVlanWildCardEntry row .1.3.6.1.4.1.10876.101.1.120.1.10.1
WildCard vlan filtering Information configured into device by
management to which frames received from any port and for any
vlan containing this wild card mac address as destination address
and for which there is no sta…
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanWildCardMacAddress
The destination MAC address in a frame to which this entry's
filtering information applies. This object must take the
value of a Unicast, Multicast or Broadcast address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.1.120.1.10.1.1
fsMIDot1qFutureVlanWildCardRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.120.1.10.1.2

fsMIDot1qFutureVlanWildCardPortTable

table
.1.3.6.1.4.1.10876.101.1.120.1.11 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanWildCardPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanWildCardPortTable' 
A Table containing ports to which frames received from a specific
port and destined for fsMIDot1qFutureVlanWildCardMacAddress must be
forwarded, if there is no specific static filtering entry exist
for this MAC.
fsMIDot1qFutureVlanWildCardPortEntry row .1.3.6.1.4.1.10876.101.1.120.1.11.1
WildCard vlan filtering Information configured into device by
management specifying set of ports to which frames received
from any port and for any vlan containing
fsMIDot1qFutureVlanWildCardMacAddress mac address as de…
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanIsWildCardEgressPort
Indicates whether the port is an egress port of wildcard entry.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.11.1.1

fsMIDot1qFutureStaticUnicastExtnTable

table
.1.3.6.1.4.1.10876.101.1.120.1.12 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureStaticUnicastExtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureStaticUnicastExtnTable' 
A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table as the port number from
which frames with a specific destination address are
received, is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only. This table maintains context ID as
one more index to support Multiple Instances.
fsMIDot1qFutureStaticUnicastExtnEntry row .1.3.6.1.4.1.10876.101.1.120.1.12.1
Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureStaticConnectionIdentifier
This object is to associate the backbone MAC address of the
peer backbone edge bridge with customer Mac addresses that
can be reached through the peer backbone edge bridge.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.10876.101.1.120.1.12.1.1

fsMIDot1qFutureVlanPortSubnetMapTable

table
.1.3.6.1.4.1.10876.101.1.120.1.13 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanPortSubnetMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanPortSubnetMapTable' 
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership. 
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
This table maintains context ID as one more index to support 
Multiple Instances. In case of BCM, the dot1qFutureVlanPort index 
should always be 0 since BCM supports Subnet based VLAN 
globally (not on per port)
fsMIDot1qFutureVlanPortSubnetMapEntry row .1.3.6.1.4.1.10876.101.1.120.1.13.1
Entry that contains Vlan-Subnet address mapping.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanPortSubnetMapAddr
The Source IP-Subnet address for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.120.1.13.1.1
fsMIDot1qFutureVlanPortSubnetMapVid
The Vlan to which the source IP-Subnet address of this entry is mapped to.
VlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.10876.101.1.120.1.13.1.2
fsMIDot1qFutureVlanPortSubnetMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.120.1.13.1.4

fsMIDot1qFutureStVlanExtTable

table
.1.3.6.1.4.1.10876.101.1.120.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureStVlanExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureStVlanExtTable' 
An extension to fsDot1qVlanStaticTable VLAN table.
This table contains the Private Vlan (PVLAN) related
configurations.
fsMIDot1qFutureStVlanExtEntry row .1.3.6.1.4.1.10876.101.1.120.1.15.1
Each entry specifies the Private Vlan configuration done for
a given Vlan.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureStVlanPVlanType
This object identifies the Private vlan type for this vlan.
normal - Vlan does not belong to any Private VLAN domain.
primary - Primary vlan in a Private VLAN domain.
isolated - Isolated vlan in a Private VLAN dom…
Enumerationr/w .1.3.6.1.4.1.10876.101.1.120.1.15.1.1
fsMIDot1qFutureStVlanPrimaryVid
This object identifies the primary vlan assoicated with this
vlan.
For primary and normal vlans, this object will have the value zero
and configuring this object to non-zero value will not be allowed for
them.
For se…
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.10876.101.1.120.1.15.1.2
fsMIDot1qFutureStVlanFdbFlush
If this object is set as 'true', then all the dynamically
learnt MAC addresses in this Vlan are removed.After flush
this object is set to 'false'
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.15.1.3

fsMIDot1qFutureVlanPortSubnetMapExtTable

table
.1.3.6.1.4.1.10876.101.1.120.1.16 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanPortSubnetMapExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanPortSubnetMapExtTable' 
Subnet based VLAN classification - The source IP-subnet address in
the incoming packets is used to classify VLAN membership.
Subnet based VLAN is applied only on IP/ARP packets.
This table contains information on Subnet-VlanId address mapping.
fsMIDot1qFutureVlanPortSubnetMapExtEntry row .1.3.6.1.4.1.10876.101.1.120.1.16.1
Entry that contains Vlan-Subnet address mapping.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanPortSubnetMapExtAddr
The Source IP address for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.120.1.16.1.1
fsMIDot1qFutureVlanPortSubnetMapExtMask
The Subnet Mask for which the Vlan mapping is present
in the entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.120.1.16.1.2
fsMIDot1qFutureVlanPortSubnetMapExtVid
The Vlan to which the Source IP-Subnet address of this entry is mapped to.
VlanIdr/w
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.10876.101.1.120.1.16.1.3
fsMIDot1qFutureVlanPortSubnetMapExtRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.120.1.16.1.5

fsMIDot1qFuturePortVlanExtTable

table
.1.3.6.1.4.1.10876.101.1.120.1.17 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFuturePortVlanExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFuturePortVlanExtTable' 
An extension to fsDot1qVlanStaticPortConfigEntry VLAN table.
This table contains the FDB Flush related
configurations.
fsMIDot1qFuturePortVlanExtEntry row .1.3.6.1.4.1.10876.101.1.120.1.17.1
Each entry specifies the Vlan configuration done for
a given Vlan and Port.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFuturePortVlanFdbFlush
If this object is set to 'true', then all the dynamically
learnt MAC addresses on the specified interface and vlan
are removed.After flush this object is set to 'false'
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.120.1.17.1.1

fsMIDot1qFutureVlanTunnelConfigTable

table deprecated
.1.3.6.1.4.1.10876.101.1.120.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanTunnelConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanTunnelConfigTable' 
List of per virtual context Vlan Tunnel config parameters.
fsMIDot1qFutureVlanTunnelConfigEntry row .1.3.6.1.4.1.10876.101.1.120.2.1.1
Per virtual context Vlan Tunnel config parameters.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanBridgeModedeprecated
This object indicates the Bridge mode of the switch.

Setting this to 'customerBridge' means that the switch will operate
as a 802.1Q VLAN Bridge.

Setting this to 'providerBridge' means tha…
Enumerationr/w .1.3.6.1.4.1.10876.101.1.120.2.1.1.1
fsMIDot1qFutureVlanTunnelBpduPrideprecated
Specifies the default User Priority for all the tunneled Layer 2
BPDU's received on tunnel ports.
Integer32r/w .1.3.6.1.4.1.10876.101.1.120.2.1.1.2

fsMIDot1qFutureVlanTunnelTable

table deprecated
.1.3.6.1.4.1.10876.101.1.120.2.2 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanTunnelTable' 
This table contains information about the fsMIDot1q tunnel ports. A 
walk on this table will show only those interfaces that are configured 
for tunneling.
This table is supported only when the Bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib.
fsMIDot1qFutureVlanTunnelEntry row .1.3.6.1.4.1.10876.101.1.120.2.2.1
Entry indicating the tunnel information of the port.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanTunnelStatusdeprecated
Indicates whether fsMIDot1qTunnelling is enabled or disabled on this
port. fsMIDot1qFutureVlanTunnelStatus can be set to `enabled`
only if the Bridge mode is set to be `Provider Bridge Mode` and
Future VLAN port type…
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.2.2.1.1

fsMIDot1qFutureVlanTunnelProtocolTable

table deprecated
.1.3.6.1.4.1.10876.101.1.120.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIDot1qFutureVlanTunnelProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIVlan-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIVlan-MIB::fsMIDot1qFutureVlanTunnelProtocolTable' 
This table contains information/statistics about the customer STP 
BPDU's being tunneled inside the service provider network. A walk on 
this table will show only those interfaces in which tunneling of STP 
BPDU's is enabled.
This table is supported only when the Bridge is configured in Provider 
Bridge (Q-in-Q) mode.
For Provider Core or Edge bridges, the tunnel protocol configuration
objects are defined in fspb.mib.
fsMIDot1qFutureVlanTunnelProtocolEntry row .1.3.6.1.4.1.10876.101.1.120.2.3.1
Entry indicating the tunneling of STP BPDU's on this port.
Indexes
No indexes recorded
Column Syntax OID
fsMIDot1qFutureVlanTunnelStpPDUsdeprecated
Indicates whether tunneling of STP BPDUs is enabled or not.
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.1
fsMIDot1qFutureVlanTunnelStpPDUsRecvddeprecated
The number of tunneled ingress STP PDU's.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.2
fsMIDot1qFutureVlanTunnelStpPDUsSentdeprecated
The number of tunneled egress STP PDU's.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.3
fsMIDot1qFutureVlanTunnelGvrpPDUsdeprecated
Indicates whether tunneling of GVRP BPDUs is enabled or not.
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.4
fsMIDot1qFutureVlanTunnelGvrpPDUsRecvddeprecated
The number of tunneled ingress GVRP PDU's.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.5
fsMIDot1qFutureVlanTunnelGvrpPDUsSentdeprecated
The number of tunneled egress GVRP PDU's.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.6
fsMIDot1qFutureVlanTunnelIgmpPktsdeprecated
Indicates whether tunneling of IGMP Packets is enabled or not.
EnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.7
fsMIDot1qFutureVlanTunnelIgmpPktsRecvddeprecated
The number of tunneled ingress IGMP Packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.8
fsMIDot1qFutureVlanTunnelIgmpPktsSentdeprecated
The number of tunneled egress IGMP Packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.120.2.3.1.9