SUPERMICRO-MIFS-IP-MIB Table View

Table to store the virtual router specific IP configurations

fsMIFsIpGlobalEntry row .1.3.6.1.4.1.10876.101.2.38.2.1

Each entry has IP configuration information for the Virtual router

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId

Column	Syntax	OID
fsMIFsIpInLengthErrors Total number of packets received by IP with length less than IP header length in the specific context.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.1
fsMIFsIpInCksumErrors Total Number of received packets those failed to pass checksum verification in a specific context.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.2
fsMIFsIpInVersionErrors Total number of received packets with different IP version from this entity in a specific context.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.3
fsMIFsIpInTTLErrors Number of IP packets received at this entity with 'Time to Live' field equal to ZERO	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.4
fsMIFsIpInOptionErrors Number of IP packets received with improper options.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.5
fsMIFsIpInBroadCasts Total number of IP broadcast packets received at this entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.6
fsMIFsIpOutGenErrors Number of outgoing IP packets rejected due to general problems like interface down, forwarding disabled etc.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.2.1.7
fsMIFsIpOptProcEnable Indication as to if Option processing is active.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.2.1.8
fsMIFsIpNumMultipath The number of multi-paths in the routing table.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.10876.101.2.38.2.1.9
fsMIFsIpLoadShareEnable Enabling this will distribute the load among available equal cost multi-paths.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.2.1.10
fsMIFsIpEnablePMTUD This Object Enables or Disables PMTU-D in the context. This MIB Object overrides the route-based and application-level requests for PMTU-D. When this object is set to disabled (2), PMTU-D is not done even if the applic…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.2.1.11
fsMIFsIpPmtuEntryAge This object specifies the timeout in minutes, after which the estimate of a PMTU is considered stale. After the configured minutes the estimate of the PMTU is increased. When Set to inifinity (255), detection in increas…	Integer32r/w Constraints: range: 5-255	.1.3.6.1.4.1.10876.101.2.38.2.1.12
fsMIFsIpContextDebug Enables the tracing in the selected submodule in IP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 - Management …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.2.1.13

This entity's IP Traceroute Configuration Table.

fsMIFsIpTraceConfigEntry row .1.3.6.1.4.1.10876.101.2.38.3.1

Contains the configuration information about a
particular IP
traceroute Operation.

Indexes

fsMIFsIpTraceConfigDest

Column	Syntax	OID
fsMIFsIpTraceConfigDest The destination IP address to which a route has to be traced.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.3.1.1
fsMIFsIpTraceConfigAdminStatus The desired status for the traceroute operation. This variable has to be made on (from off) for starting the operation. If this variable is set to on when fsMIFsIpTraceConfigOperStatus is inprogress, then GEN_ERROR is r…	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.10876.101.2.38.3.1.2
fsMIFsIpTraceConfigMaxTTL The maximum value of the TTL field to be filled up in the IP packets used for the traceroute.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.10876.101.2.38.3.1.3
fsMIFsIpTraceConfigMinTTL The minimum value of the TTL field to be filled up in the IP packets used for the traceroute.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.10876.101.2.38.3.1.4
fsMIFsIpTraceConfigOperStatus The current status for the traceroute operation.	Enumeration Enumerated Values: 1 inprogress 2 notinprogress	.1.3.6.1.4.1.10876.101.2.38.3.1.5
fsMIFsIpTraceConfigTimeout Interval between (in seconds) consecutive trace requests.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.3.1.6
fsMIFsIpTraceConfigMtu Number of octets of data to be sent in trace packets.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.3.1.7

This entity's IP Traceroute Table containing the
results of the traceroute operation(s).

fsMIFsIpTraceEntry row .1.3.6.1.4.1.10876.101.2.38.4.1

Contains the information about a particular
intermediate node on the way to the destination.

Indexes

fsMIFsIpTraceDest fsMIFsIpTraceHopCount

Column	Syntax	OID
fsMIFsIpTraceDest The destination IP address to which a route was traced.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.4.1.1
fsMIFsIpTraceHopCount The count of the number of hops required to reach this intermediate node.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.4.1.2
fsMIFsIpTraceIntermHop The IP address of the intermediate node/destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.4.1.3
fsMIFsIpTraceReachTime1 The time in seconds required to reach this intermediate node.The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.4.1.4
fsMIFsIpTraceReachTime2 The time in seconds required to reach this intermediate node for the second time. The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.4.1.5
fsMIFsIpTraceReachTime3 The time in seconds required to reach this intermediate node for the third time. The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.4.1.6

The table of IP addresses on every Interface.

fsMIFsIpAddressEntry row .1.3.6.1.4.1.10876.101.2.38.5.1

The individual entry in the above table.

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId fsMIFsIpAddrTabAddress

Column	Syntax	OID
fsMIFsIpAddrTabAddress One of the router's IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.5.1.1
fsMIFsIpAddrTabIfaceId The interface number to which the IP address belongs to.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.5.1.2
fsMIFsIpAddrTabAdvertise A flag indicating whether or not the address is to be advertised.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.38.5.1.3
fsMIFsIpAddrTabPreflevel The preferability of the address as a default router address, relative to other router addresses on the same subnet. A 32-bit, signed, twos-complement integer, with higher values meaning more preferable.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.5.1.4
fsMIFsIpAddrTabStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.5.1.5

List of default router addresses. Used when system
functions as a host.Maintained as per RFC 1122.

fsMIFsIpRtrLstEntry row .1.3.6.1.4.1.10876.101.2.38.6.1

The individual entry in the above table.

Indexes

fsMIFsIpRtrLstAddress

Column	Syntax	OID
fsMIFsIpRtrLstIface The interface via which the router could be reached.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.6.1.1
fsMIFsIpRtrLstAddress An IP address of a default router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.6.1.2
fsMIFsIpRtrLstPreflevel The preferability of the RouterAddress as a default router address, relative to other router addresses on the same subnet.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.6.1.3
fsMIFsIpRtrLstStatic This entry states how the default router address was learned.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.38.6.1.4
fsMIFsIpRtrLstStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.6.1.5

This Table shows the PMTU-D information for every path. 
Administrator can enable or disable PMTU-D per 
destination basis. This overrides the request from the 
application.

fsMIFsIpPathMtuEntry row .1.3.6.1.4.1.10876.101.2.38.7.1

This object forms the conceptual row of the PMTU Table.

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId fsMIFsIpPmtuDestination fsMIFsIpPmtuTos

Column	Syntax	OID
fsMIFsIpPmtuDestination Specifies the Destination IP address of the Path for which the discovery is made.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.7.1.1
fsMIFsIpPmtuTos Specifies the type of service of the path.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.7.1.2
fsMIFsIpPathMtu Value of the path mtu discovered. If the admin changes this value, PMTU discovery on that path is stopped.	Integer32r/w Constraints: range: 68-65535	.1.3.6.1.4.1.10876.101.2.38.7.1.3
fsMIFsIpPmtuDisc Enables or Disables PMTU discovery for the given path. This overrides the application request wrt to PMTU-D.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.7.1.4
fsMIFsIpPmtuEntryStatus Entry Status of the row in the PMTU table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.7.1.5

Common routing Table which contains all the routing entries
for a particular destination.

fsMIFsIpCommonRoutingEntry row .1.3.6.1.4.1.10876.101.2.38.8.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId fsMIFsIpRouteDest fsMIFsIpRouteMask fsMIFsIpRouteTos fsMIFsIpRouteNextHop fsMIFsIpRouteProto

Column	Syntax	OID
fsMIFsIpRouteDest The destination IP address of this route.This object may not take a Multicast (Class D)address value.Any assignment (implicit or otherwise) of an instance of this object , to a value x must be rejected if the b…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.8.1.1
fsMIFsIpRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the fsMIFsIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent con…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.8.1.2
fsMIFsIpRouteTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.3
fsMIFsIpRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.8.1.4
fsMIFsIpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.10876.101.2.38.8.1.5
fsMIFsIpRouteProtoInstanceId Instance Id of the dynamic routing protocol. This supports multiple instantiation of dynamic protocols.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.6
fsMIFsIpRouteIfIndex The ifIndex value which identifies the local interface through which,the next hop of this route should be reached.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.7
fsMIFsIpRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes w…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.10876.101.2.38.8.1.8
fsMIFsIpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.9
fsMIFsIpRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's fsMIFsIpRouteProto value. When this object is unknown or not relevant…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.10
fsMIFsIpRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's fsMIFsIpRouteProto value. If this metric is not used, its value sho…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.11
fsMIFsIpRoutePreference The preference for the method by which this route was learned. This value will be used by the forwarding algorithm to choose the best route.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.2.38.8.1.12
fsMIFsIpRouteStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.8.1.13
fsMIFsIpRouteProvider This object is used to indicates the source where the route was learned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.8.1.14

IP interface table which maintains the interface specific
configurable parameters of IP.

fsMIFsIpifEntry row .1.3.6.1.4.1.10876.101.2.38.9.1

A particular interface specific IP information.

Indexes

fsMIFsIpifIndex

Column	Syntax	OID
fsMIFsIpifIndex The index value which identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in MIB II.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.9.1.1
fsMIFsIpifMaxReasmSize The maximum size of the fragmented IP datagram received on this interface that can be considered for reassembly.	Integer32r/w Constraints: range: 1024-33280	.1.3.6.1.4.1.10876.101.2.38.9.1.2
fsMIFsIpifIcmpRedirectEnable Enabling or Diabling of the ICMP redirect messages on an interface basis.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.9.1.3
fsMIFsIpifDrtBcastFwdingEnable Enabling of Directed broadcast forwarding on that interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.9.1.4
fsMIFsIpifContextId The context to which the interface is mapped.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.2.38.9.1.5
fsMIFsIpifProxyArpAdminStatus Enables or Disables Proxy ARP Feature for that interface. By default, this object should have the value enabled(1).	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.9.1.6
fsMIFsIpifLocalProxyArpAdminStatus This Object Enables or Disables Proxy ARP feature in local subnet. When this object is set to enabled (1), ISS will act as ARP proxy for target address which is in same subnet also. When this object is set to disabled (…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.9.1.7

Table to store the virtual router specific ICMP configurations

fsMIFsIcmpGlobalEntry row .1.3.6.1.4.1.10876.101.2.38.10.1

Each entry has ICMP configuration information for the Virtual router

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId

Column	Syntax	OID
fsMIFsIcmpSendRedirectEnable Allow sending ICMP Redirect Message	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.1
fsMIFsIcmpSendUnreachableEnable Allow sending ICMP Unreachable Message	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.2
fsMIFsIcmpSendEchoReplyEnable Allow sending ICMP Echo Reply Message	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.3
fsMIFsIcmpNetMaskReplyEnable Allow sending ICMP Net Mask Reply Message	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.4
fsMIFsIcmpTimeStampReplyEnable Allow sending ICMP Time stamp reply Message	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.5
fsMIFsIcmpInDomainNameRequests The number of ICMP Domain Name Requests received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.6
fsMIFsIcmpInDomainNameReply The number of ICMP Domain Name Replies received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.7
fsMIFsIcmpOutDomainNameRequests The number of ICMP Domain Name Requests send.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.8
fsMIFsIcmpOutDomainNameReply The number of ICMP Domain Name Replies send.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.9
fsMIFsIcmpDirectQueryEnable DNS Direct Query will be enabled or disabled accordingly	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.10
fsMIFsIcmpDomainName Domain Name of the system, used to send when replies to DNS Direct Query.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.10876.101.2.38.10.1.11
fsMIFsIcmpTimeToLive The number of seconds untill which the name can be cached.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.10.1.12
fsMIFsIcmpInSecurityFailures The number of ICMP Security Failure messages received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.13
fsMIFsIcmpOutSecurityFailures The number of ICMP Security Failure messages sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.10.1.14
fsMIFsIcmpSendSecurityFailuresEnable Allow sending Security Failure messages.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.15
fsMIFsIcmpRecvSecurityFailuresEnable Allow Recieving Security Failure messages.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.2.38.10.1.16

Table to store the virtual router specific ICMP configurations

fsMIFsUdpGlobalEntry row .1.3.6.1.4.1.10876.101.2.38.11.1

Each entry has ICMP configuration information for the Virtual router

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId

Column	Syntax	OID
fsMIFsUdpInNoCksum Number of UDP datagrams received without checksum	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.11.1.1
fsMIFsUdpInIcmpErr Number of ICMP error packets received	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.11.1.2
fsMIFsUdpInErrCksum Number of UDP packets received with wrong checksum	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.11.1.3
fsMIFsUdpInBcast Number of UDP packets received in broadcast mode	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.2.38.11.1.4

The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet.

fsMIFsIpCidrAggEntry row .1.3.6.1.4.1.10876.101.2.38.12.1

An entry (conceptual row) in the
fsMIFsIpCidrAggTable representing supertnet route for
the domain.

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId fsMIFsIpCidrAggAddress fsMIFsIpCidrAggAddressMask

Column	Syntax	OID
fsMIFsIpCidrAggAddress The aggregated address which when combined with the corresponding value of fsMIFsIpCidrAggAddressMask identifies the supernet route for this domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.12.1.1
fsMIFsIpCidrAggAddressMask The aggregated address mask which when combined with the corresponding value of fsMIFsIpCidrAggAddress identifies the supernet route for the domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.12.1.2
fsMIFsIpCidrAggStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.12.1.3

The (conceptual) table listing the routes that are to
be explicitly advertised on a specific interface,
for multi-homed reasons, or policy reasons

fsMIFsCidrAdvertEntry row .1.3.6.1.4.1.10876.101.2.38.13.1

An entry (conceptual row) in the
fsMIFsCidrAdvertTable representing a route to be explicitly
advertised on a specific interface.

Indexes

SUPERMICRO-MISTD-IPVX-MIBfsMIStdIpContextId fsMIFsCidrAdvertAddress fsMIFsCidrAdvertAddressMask

Column	Syntax	OID
fsMIFsCidrAdvertAddress The network address which when combined with the corresponding value of fsMIFsCidrAdvertAddressMask identifies the route that is to be explicitly advertised.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.13.1.1
fsMIFsCidrAdvertAddressMask The destination network address mask which when combined with the corresponding value of fsMIFsCidrAdvertAddress identifies the route to be explicitly advertised.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.13.1.2
fsMIFsCidrAdvertStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.13.1.3

This table has interface specific irdp configurable
objects.

fsMIFsIrdpIfConfEntry row .1.3.6.1.4.1.10876.101.2.38.19.1

The individual entry in the above table.

Indexes

fsMIFsIrdpIfConfIfNum fsMIFsIrdpIfConfSubref

Column	Syntax	OID
fsMIFsIrdpIfConfIfNum The number of interfaces present in this system.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.19.1.1
fsMIFsIrdpIfConfSubref The subreference of this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.2.38.19.1.2
fsMIFsIrdpIfConfAdvertisementAddress The IP destination address to be used for multicast Rourter Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or limited-broadcast address, 255.255.255…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.19.1.3
fsMIFsIrdpIfConfMaxAdvertisementInterval The maximum time allowed between sending multicast Advertisements from the interface, in seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.10876.101.2.38.19.1.4
fsMIFsIrdpIfConfMinAdvertisementInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.10876.101.2.38.19.1.5
fsMIFsIrdpIfConfAdvertisementLifetime The value to be placed in the Lifetim efield of Router Advertisements sent from the interface, in seconds.	Integer32r/w Constraints: range: 1800-9000	.1.3.6.1.4.1.10876.101.2.38.19.1.6
fsMIFsIrdpIfConfPerformRouterDiscovery A flag indicating whether or not the host is to perform ICMP router discovery on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.2.38.19.1.7
fsMIFsIrdpIfConfSolicitationAddress The IP destination address to be used for sending Router Solicitations from the interface. The only permissible values are the all-routers multicast address, 224.0.0.2, or the limited-broadcast address, 255.255.255.255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.19.1.8

The Server database which maps the Client's 
hardware Address to IP Address .

fsMIFsRarpServerDatabaseEntry row .1.3.6.1.4.1.10876.101.2.38.26.1

Contains entry for a particular client.

Indexes

fsMIFsHardwareAddress

Column	Syntax	OID
fsMIFsHardwareAddress The Hardware address of the client.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.10876.101.2.38.26.1.1
fsMIFsHardwareAddrLen The hardware address length of the spceified index.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.2.38.26.1.2
fsMIFsProtocolAddress IP Address corresponding to the client's Hardware Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.2.38.26.1.3
fsMIFsEntryStatus The status of this row,by which new entries may be created or old entries can be deleted from this server table as per SMIv2.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.2.38.26.1.4