SUPERMICRO-IP-MIB Table View

This entity's IP Traceroute Configuration Table.

fsIpTraceConfigEntry row .1.3.6.1.4.1.10876.101.1.2.1.16.1

Contains the configuration information about a
particular IP
traceroute Operation.

Indexes

fsIpTraceConfigDest

Column	Syntax	OID
fsIpTraceConfigDest The destination IP address to which a route has to be traced.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.16.1.1
fsIpTraceConfigAdminStatus The desired status for the traceroute operation. This variable has to be made on (from off) for starting the operation. If this variable is set to on when fsIpTraceConfigOperStatus is inprogress, then GEN_ERROR is retur…	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.10876.101.1.2.1.16.1.2
fsIpTraceConfigMaxTTL The maximum value of the TTL field to be filled up in the IP packets used for the traceroute.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.10876.101.1.2.1.16.1.3
fsIpTraceConfigMinTTL The minimum value of the TTL field to be filled up in the IP packets used for the traceroute.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.10876.101.1.2.1.16.1.4
fsIpTraceConfigOperStatus The current status for the traceroute operation.	Enumeration Enumerated Values: 1 inprogress 2 notinprogress	.1.3.6.1.4.1.10876.101.1.2.1.16.1.5
fsIpTraceConfigTimeout Interval between (in seconds) consecutive trace requests.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.16.1.6
fsIpTraceConfigMtu Number of octets of data to be sent in trace packets.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.16.1.7

This entity's IP Traceroute Table containing the
results of the traceroute operation(s).

fsIpTraceEntry row .1.3.6.1.4.1.10876.101.1.2.1.17.1

Contains the information about a particular
intermediate node on the way to the destination.

Indexes

fsIpTraceDest fsIpTraceHopCount

Column	Syntax	OID
fsIpTraceDest The destination IP address to which a route was traced.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.17.1.1
fsIpTraceHopCount The count of the number of hops required to reach this intermediate node.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.17.1.2
fsIpTraceIntermHop The IP address of the intermediate node/destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.17.1.3
fsIpTraceReachTime1 The time in seconds required to reach this intermediate node.The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.17.1.4
fsIpTraceReachTime2 The time in seconds required to reach this intermediate node for the second time. The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.17.1.5
fsIpTraceReachTime3 The time in seconds required to reach this intermediate node for the third time. The value of '-1' denotes that the response was not received from this node	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.17.1.6

The table of IP addresses on every Interface.

fsIpAddressEntry row .1.3.6.1.4.1.10876.101.1.2.1.18.1

The individual entry in the above table.

Indexes

fsIpAddrTabAddress

Column	Syntax	OID
fsIpAddrTabIfaceId The interface number to which the IP address belongs to.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.18.1.1
fsIpAddrTabAddress One of the router's IP addresses.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.18.1.2
fsIpAddrTabAdvertise A flag indicating whether or not the address is to be advertised.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.2.1.18.1.3
fsIpAddrTabPreflevel The preferability of the address as a default router address, relative to other router addresses on the same subnet. A 32-bit, signed, twos-complement integer, with higher values meaning more preferable.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.18.1.4
fsIpAddrTabStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.1.18.1.5

List of default router addresses. Used when system
functions as a host.Maintained as per RFC 1122.

fsIpRtrLstEntry row .1.3.6.1.4.1.10876.101.1.2.1.19.1

The individual entry in the above table.

Indexes

fsIpRtrLstAddress

Column	Syntax	OID
fsIpRtrLstIface The interface via which the router could be reached.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.19.1.1
fsIpRtrLstAddress An IP address of a default router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.19.1.2
fsIpRtrLstPreflevel The preferability of the RouterAddress as a default router address, relative to other router addresses on the same subnet.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.19.1.3
fsIpRtrLstStatic This entry states how the default router address was learned.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.2.1.19.1.4
fsIpRtrLstStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.1.19.1.5

This Table shows the PMTU-D information for every path. 
Administrator can enable or disable PMTU-D per 
destination basis. This overrides the request from the 
application.

fsIpPathMtuEntry row .1.3.6.1.4.1.10876.101.1.2.1.20.1

This object forms the conceptual row of the PMTU Table.

Indexes

fsIpPmtuDestination fsIpPmtuTos

Column	Syntax	OID
fsIpPmtuDestination Specifies the Destination IP address of the Path for which the discovery is made.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.20.1.1
fsIpPmtuTos Specifies the type of service of the path.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.20.1.2
fsIpPathMtu Value of the path mtu discovered. If the admin changes this value, PMTU discovery on that path is stopped.	Integer32r/w Constraints: range: 68-65535	.1.3.6.1.4.1.10876.101.1.2.1.20.1.3
fsIpPmtuDisc Enables or Disables PMTU discovery for the given path. This overrides the application request wrt to PMTU-D.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.2.1.20.1.4
fsIpPmtuEntryStatus Entry Status of the row in the PMTU table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.1.20.1.5

Common routing Table which contains all the routing entries
for a particular destination.

fsIpCommonRoutingEntry row .1.3.6.1.4.1.10876.101.1.2.1.22.1

A particular route to a particular destina-
tion, under a particular policy.

Indexes

fsIpRouteDest fsIpRouteMask fsIpRouteTos fsIpRouteNextHop fsIpRouteProto

Column	Syntax	OID
fsIpRouteDest The destination IP address of this route.This object may not take a Multicast (Class D)address value.Any assignment (implicit or otherwise) of an instance of this object , to a value x must be rejected if the b…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.22.1.1
fsIpRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the fsIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constru…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.22.1.2
fsIpRouteTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+---…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.3
fsIpRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.1.22.1.4
fsIpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp	.1.3.6.1.4.1.10876.101.1.2.1.22.1.5
fsIpRouteProtoInstanceId Instance Id of the dynamic routing protocol. This supports multiple instantiation of dynamic protocols.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.6
fsIpRouteIfIndex The ifIndex value which identifies the local interface through which,the next hop of this route should be reached.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.7
fsIpRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes w…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.10876.101.1.2.1.22.1.8
fsIpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.9
fsIpRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's fsIpRouteProto value. When this object is unknown or not relevant its value…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.10
fsIpRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's fsIpRouteProto value. If this metric is not used, its value should be set…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.11
fsIpRoutePreference The preference for the method by which this route was learned. This value will be used by the forwarding algorithm to choose the best route.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.2.1.22.1.12
fsIpRouteStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.1.22.1.13
fsIpRouteProvider This object is used to indicates the source where the route was learned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.2.1.22.1.14

IP interface table which maintains the interface specific configurable parameters of IP.

fsIpifEntry row .1.3.6.1.4.1.10876.101.1.2.1.23.1

A particular interface specific IP information.

Indexes

fsIpifIndex

Column	Syntax	OID
fsIpifIndex The index value which identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in MIB II.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.1.23.1.1
fsIpifMaxReasmSize The maximum size of the fragmented IP datagram received on this interface that can be considered for reassembly.	Integer32r/w Constraints: range: 1024-33280	.1.3.6.1.4.1.10876.101.1.2.1.23.1.2
fsIpifIcmpRedirectEnable Enabling or Diabling of the ICMP redirect messages on an interface basis.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.2.1.23.1.3
fsIpifDrtBcastFwdingEnable Enabling of Directed broadcast forwarding on that interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.2.1.23.1.4
fsIpifProxyArpAdminStatus Enables or Disables Proxy ARP Feature for that interface. By default, this object should have the value disabled(2).	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.2.1.23.1.5
fsIpifLocalProxyArpAdminStatus This Object Enables or Disables Proxy ARP feature in local subnet. When this object is set to enabled (1), ISS will act as ARP proxy for target address which is in same subnet also. When this object is set to disabled…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.2.1.23.1.6

The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet.

fsCidrAggEntry row .1.3.6.1.4.1.10876.101.1.2.5.1.1

An entry (conceptual row) in the
fsCidrAggTable representing supertnet route for
the domain.

Indexes

fsCidrAggAddress fsCidrAggAddressMask

Column	Syntax	OID
fsCidrAggAddress The aggregated address which when combined with the corresponding value of fsCidrAggAddressMask identifies the supernet route for this domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.5.1.1.1
fsCidrAggAddressMask The aggregated address mask which when combined with the corresponding value of fsCidrAggAddress identifies the supernet route for the domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.5.1.1.2
fsCidrAggStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.5.1.1.3

The (conceptual) table listing the routes that are to
be explicitly advertised on a specific interface,
for multi-homed reasons, or policy reasons

fsCidrAdvertEntry row .1.3.6.1.4.1.10876.101.1.2.5.2.1

An entry (conceptual row) in the
fsCidrAdvertTable representing a route to be explicitly
advertised on a specific interface.

Indexes

fsCidrAdvertAddress fsCidrAdvertAddressMask

Column	Syntax	OID
fsCidrAdvertAddress The network address which when combined with the corresponding value of fsCidrAdvertAddressMask identifies the route that is to be explicitly advertised.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.5.2.1.1
fsCidrAdvertAddressMask The destination network address mask which when combined with the corresponding value of fsCidrAdvertAddress identifies the route to be explicitly advertised.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.5.2.1.2
fsCidrAdvertStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.5.2.1.3

This table has interface specific irdp configurable
objects.

fsIrdpIfConfEntry row .1.3.6.1.4.1.10876.101.1.2.8.6.1

The individual entry in the above table.

Indexes

fsIrdpIfConfIfNum fsIrdpIfConfSubref

Column	Syntax	OID
fsIrdpIfConfIfNum The number of interfaces present in this system.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.8.6.1.1
fsIrdpIfConfSubref The subreference of this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.2.8.6.1.2
fsIrdpIfConfAdvertisementAddress The IP destination address to be used for multicast Rourter Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or limited-broadcast address, 255.255.255…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.8.6.1.3
fsIrdpIfConfMaxAdvertisementInterval The maximum time allowed between sending multicast Advertisements from the interface, in seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.10876.101.1.2.8.6.1.4
fsIrdpIfConfMinAdvertisementInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.10876.101.1.2.8.6.1.5
fsIrdpIfConfAdvertisementLifetime The value to be placed in the Lifetim efield of Router Advertisements sent from the interface, in seconds.	Integer32r/w Constraints: range: 1800-9000	.1.3.6.1.4.1.10876.101.1.2.8.6.1.6
fsIrdpIfConfPerformRouterDiscovery A flag indicating whether or not the host is to perform ICMP router discovery on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.2.8.6.1.7
fsIrdpIfConfSolicitationAddress The IP destination address to be used for sending Router Solicitations from the interface. The only permissible values are the all-routers multicast address, 224.0.0.2, or the limited-broadcast address, 255.255.255.255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.8.6.1.8

The Server database which maps the Client's 
hardware Address to IP Address .

fsRarpServerDatabaseEntry row .1.3.6.1.4.1.10876.101.1.2.10.4.1

Contains entry for a particular client.

Indexes

fsHardwareAddress

Column	Syntax	OID
fsHardwareAddress The Hardware address of the client.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.10876.101.1.2.10.4.1.1
fsHardwareAddrLen The hardware address length of the spceified index.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.1.2.10.4.1.2
fsProtocolAddress IP Address corresponding to the client's Hardware Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.2.10.4.1.3
fsEntryStatus The status of this row,by which new entries may be created or old entries can be deleted from this server table as per SMIv2.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.2.10.4.1.4