SUPERMICRO-ECFM-MI-MIB Table View

fsMIEcfmDefaultMdDefLevel

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.1

fsMIEcfmSystemControl

The administrative system control status of Ethernet
CFM module. The value 'start' (1) indicates that all
resources required by ECFM module should be allocated
and ECFM should be supported in the device on all ports.
…

Enumerationr/w

Enumerated Values:

1	start
2	shutdown

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.2

fsMIEcfmModuleStatus

The administrative module status of Ethernet CFM module.
This enables or disables ECFM in the system. A value of
'enabled' (1) indicates that ECFM is enabled in the device.
A value of 'disabled' (2) indicates that ECF…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.3

A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for each fsMIEcfmDefaultMdEntry whose
fsMIEcfmDefaultMdLevel object contains the value -…

FsMIEcfmMDLevelr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.4

fsMIEcfmDefaultMdDefMhfCreation

A value indicating if the Management entity can create MHFs
(MIP Half Function) for the VID, for each
fsMIEcfmDefaultMdEntry whose fsMIEcfmDefaultMdMhfCreation
object contains the value defMHFdefer. Since, in this
vari…

fsMIEcfmDefaultMdDefIdPermission

Type Values:

1	defMHFnone
2	defMHFdefault
3	defMHFexplicit
4	defMHFdefer

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.5

Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain, for each
fsMIEcfmDefaultMdEntry whose fsMIEcfmDefaultMdIdPerm…

FsMIEcfmIndexIntegerNextFree

Type Values:

1	sendIdNone
2	sendIdChassis
3	sendIdManage
4	sendIdChassisManage
5	sendIdDefer

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.6

fsMIEcfmMdTableNextIndex

This object contains an unused value for fsMIEcfmMdIndex in
the fsMIEcfmMdTable, or a zero to indicate that none exist.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.7

fsMIEcfmLtrCacheStatus

The administrative status of LTR cache.
This enables or disables caching of CFM data learned through trace
route messages

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.8

fsMIEcfmLtrCacheClear

Indicates if the contents of traceroute cache are to be removed.
If set to true then entries in traceroute cache are removed,
and it sets to false.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.9

fsMIEcfmLtrCacheHoldTime

Identifies the time in minutes for which CFM traceroute cache entries
are retained

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.10

fsMIEcfmLtrCacheSize

Identifies the maximum no of entries for the CFM traceroute cache table,
only if fsMIEcfmLtrCacheStatus is enabled

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.11

fsMIEcfmMipCcmDbStatus

The administrative status of MIP CCM DB .
This enables or disables caching of data learned through CCM
messages

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.12

fsMIEcfmMipCcmDbClear

Indicates if the contents of MIP CCM DB are to be removed.
If set to true then entries in traceroute cache are removed,
and it sets to false.

fsMIEcfmMemoryFailureCount

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.13

fsMIEcfmMipCcmDbSize

Identifies the maximum no of entries for the MIP CCM DB table,
only if fsMIEcfmMipDbStatus is enabled

Integer32r/w

Constraints:
range: 1000-10000

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.14

fsMIEcfmMipCcmDbHoldTime

Identifies the time in hours for which MIP CCM DB table entries
are retained

Integer32r/w

Constraints:
range: 24-48

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.15

Identifies the number of memory allocation failures

fsMIEcfmBufferFailureCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.16

Identifies the number of buffer allocation failures

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.17

fsMIEcfmUpCount

Identifies the number of times module was enabled

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.18

fsMIEcfmDownCount

Identifies the number of times module was disabled

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.19

fsMIEcfmNoDftCount

Identifies the number of times no defect occured in any MEP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.20

fsMIEcfmRdiDftCount

Identifies the number of times RDI defect occured in any MEP

fsMIEcfmMacStatusDftCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.21

Identifies the number of times MAC Status defect occured in any MEP

fsMIEcfmRemoteCcmDftCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.22

Identifies the number of times Remote CCM defect occured in any MEP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.23

fsMIEcfmErrorCcmDftCount

Identifies the number of times Error CCM defect occured in any MEP

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.24

fsMIEcfmXconDftCount

Identifies the number of times Xconn defect occured in any MEP
filtering rules

fsMIEcfmMipDynamicEvaluationStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.25

fsMIEcfmCrosscheckDelay

To configure the number of CCMs to be missed, for which a device waits for the
remote maintenance end points(MEPs) to come up. If the user has not configured then deault value for mib object wil be taken

Integer32r/w

Constraints:
range: 0-0
range: 3-100

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.26

This enables or disables the implicit evaluation and creation of MIPs.
is purged.

fsMIEcfmContextId fsMIEcfmVlanVid

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.27

fsMIEcfmContextName

This object is used to identity the context-name.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.28

fsMIEcfmTrapControl

This object is used to enable or disable ECFM
traps.A string of 8 bits,corresponding to the administrative
status of Traps .The second bit corresponds to bit 1 of Traps
(Trap for RDI CCM defect),the third bit co…

FsMIEcfmSetTrapsr/w

Type Values:

0	trapUnUsedBit
1	trapRDICCM
2	trapMACstatus
3	trapRemoteCCM
4	trapErrorCCM
5	trapXconCCM

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.29

fsMIEcfmTrapType

Trap types:
trapRDICCM : Generated when at least one of the Remote MEP
state machines is receiving valid CCMs from its remote MEP that have the RDI
bit set.
trapMACStatus : Generated when one or more of the remote ME…

Enumeration

Enumerated Values:

0	none
2	trapRDICCM
3	trapMACStatus
4	trapRemoteCCM
5	trapErroredCCM
6	trapXConnCCM

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.30

fsMIEcfmTraceOption

This object is used to enable trace statements in
Ethernat CFM module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mappin…

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.31

fsMIEcfmGlobalCcmOffload

The administrative Global CCMOffloading status.
when value 'enabled' (1) is set then CCMOffloading will start for all the
MEPs in the system and will overwrite the per MEP offloading configuration.
when value 'disabled'…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.1.1.32

fsMIEcfmVlanTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.2 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmVlanTable'

This table defines the association of VIDs into VLANs.  There
is an entry in this table for each VID that is:
    a) a VID belonging to a VLAN associated with more than
       one VID; and
    b) not the Primary VLAN of that VID.
The entry in this table contains the Primary VID of the VLAN.
          
By default, this table is empty, meaning that every VID is
the Primary VID of a single-VID VLAN.
          
VLANs that are associated with only one VID SHOULD NOT have
an entry in this table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsMIEcfmVlanEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.2.1

The VLAN table entry.

Indexes

Column Syntax OID

fsMIEcfmVlanVid

This is a VLAN ID belonging to a VLAN that is associated with
more than one VLAN ID, and this is not the Primary VID of the
VLAN.

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.10876.101.1.160.1.0.2.1.1

fsMIEcfmVlanPrimaryVid

This is the Primary VLAN ID of the VLAN with which this
entry's fsMIEcfmVlanVid is associated. This value must not
equal the value of fsMIEcfmVlanVid.

Q-BRIDGE-MIBVlanIdr/w

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.10876.101.1.160.1.0.2.1.2

fsMIEcfmVlanRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.

fsMIEcfmContextId fsMIEcfmDefaultMdPrimaryVid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.10876.101.1.160.1.0.2.1.3

fsMIEcfmDefaultMdTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.3 · 1 row entry · 5 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmDefaultMdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmDefaultMdTable'

The Default MD Level Managed Object controls MHF creation for
VIDs that are not attached to a specific Maintenance
Association Managed Object, and Sender ID TLV transmission by
those MHFs.
          
For each Bridge Port, and for each VLAN ID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in subclause 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined.  If there exists such an
MA, that MA's objects are used by the algorithm in
subclause 22.2.3 in place of this table entry's objects.  The
agent maintains the value of fsMIEcfmDefaultMdStatus to
indicate whether this entry is overridden by an MA.
          
When first initialized, the agent creates this table
automatically with entries for all VLAN IDs,
with the default values specified for each object.
          
After this initialization, the writable objects in this
table need to be persistent upon reboot or restart of a
device.

fsMIEcfmDefaultMdEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.3.1

The Default MD Level table entry.

Indexes

Column Syntax OID

fsMIEcfmDefaultMdPrimaryVid

The Primary VID of the VLAN to which this entry's objects
apply

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.10876.101.1.160.1.0.3.1.1

fsMIEcfmDefaultMdStatus

State of this Default MD Level table entry. True if there is
no entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined, e…

fsMIEcfmDefaultMdMhfCreation

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.3.1.2

fsMIEcfmDefaultMdLevel

A value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN to which this entry's objects
apply. If this object has the value -1, the …

FsMIEcfmMDLevelOrNoner/w

Type Constraints:
range: -1..7

.1.3.6.1.4.1.10876.101.1.160.1.0.3.1.3

A value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN
is controlled by fsMIEcfmDefaultMdDefM…

fsMIEcfmDefaultMdIdPermission

Type Values:

1	defMHFnone
2	defMHFdefault
3	defMHFexplicit
4	defMHFdefer

.1.3.6.1.4.1.10876.101.1.160.1.0.3.1.4

Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MHFs
created by the Default Maintenance Domain. If this object
has the value sendIdDefer, Sender ID TLV tran…

fsMIEcfmContextId fsMIEcfmMdIndex

Type Values:

1	sendIdNone
2	sendIdChassis
3	sendIdManage
4	sendIdChassisManage
5	sendIdDefer

.1.3.6.1.4.1.10876.101.1.160.1.0.3.1.5

fsMIEcfmMdTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.4 · 1 row entry · 8 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMdTable'

The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.
          
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.

fsMIEcfmMdEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.4.1

The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

Column Syntax OID

fsMIEcfmMdIndex

The index to the Maintenance Domain table.

fsMIEcfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.

Referential integrity is required i.e. the index needs…

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.1

fsMIEcfmMdFormat

The type (and thereby format) of the Maintenance Domain Name.

FsMIEcfmMaintDomainNameTyper/w

Type Values:

1	none
2	dnsLikeName
3	macAddressAndUint
4	charString

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.2

fsMIEcfmMdName

The Maintenance Domain name. The type/format of this object
is determined by the value of the fsMIEcfmMdNameType object.

Each Maintenance Domain has unique name amongst all those
used or available to a …

FsMIEcfmMaintDomainNamer/w

Type Constraints:
range: 1..43

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.3

fsMIEcfmMdMdLevel

The Maintenance Domain Level.

FsMIEcfmMDLevelr/w

Type Constraints:
range: 0..7

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.4

fsMIEcfmMdMhfCreation

Enumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.

fsMIEcfmMdMhfIdPermission

Type Values:

1	defMHFnone
2	defMHFdefault
3	defMHFexplicit
4	defMHFdefer

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.5

Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this Maintenance Domain. Since, in this
variable, there is no encompassing Maintenance Dom…

fsMIEcfmMdMaTableNextIndex

Type Values:

1	sendIdNone
2	sendIdChassis
3	sendIdManage
4	sendIdChassisManage
5	sendIdDefer

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.6

Value to be used as the index of the MA table entries for
this Maintenance Domain when the management entity wants to
create a new row in the MA table.

FsMIEcfmIndexIntegerNextFree

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.7

fsMIEcfmMdRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.4.1.8

fsMIEcfmMaTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.5 · 1 row entry · 9 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMaTable'

The Maintenance Association table.  Each row in the table
represents an MA.  An MA is a set of MEPs, each configured
with a single service instance.
          
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs.  Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity.  The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance.  Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances.  A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.17 and 18.2).
          
This table uses two indices, first index is the index of the
Maintenance Domain table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsMIEcfmMaEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.5.1

The MA table entry.

Indexes

Column Syntax OID

fsMIEcfmMaIndex

Index of the MA table fsMIEcfmMdMaTableNextIndex needs to
be inspected to find an available index for row-creation.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.1

fsMIEcfmMaPrimaryVlanId

The Primary VLAN ID with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID. If
the MA is associated with more than one VID, the
fsMIEcfmVlanTable lists them.

Q-BRIDGE-MIBVlanIdOrNoner/w

Type Constraints:
range: 0..4094

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.2

fsMIEcfmMaFormat

The type (and thereby format) of the Maintenance Association
Name.

FsMIEcfmMaintAssocNameTyper/w

Type Values:

1	primaryVid
2	charString
3	unsignedInt16
4	rfc2865VpnId

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.3

fsMIEcfmMaName

The Short Maintenance Association name. The type/format of
this object is determined by the value of the
fsMIEcfmMaNameType object.

FsMIEcfmMaintAssocNamer/w

Type Constraints:
range: 1..45

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.4

fsMIEcfmMaMhfCreation

Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA.

Type Values:

1	defMHFnone
2	defMHFdefault
3	defMHFexplicit
4	defMHFdefer

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.5

fsMIEcfmMaIdPermission

Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.

Type Values:

1	sendIdNone
2	sendIdChassis
3	sendIdManage
4	sendIdChassisManage
5	sendIdDefer

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.6

fsMIEcfmMaCcmInterval

Interval between CCM transmissions to be used by all MEPs
in the MA.

FsMIEcfmCcmIntervalr/w

Type Values:

0	intervalInvalid
1	interval300Hz
2	interval10ms
3	interval100ms
4	interval1s
5	interval10s
6	interval1min
7	interval10min

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.7

fsMIEcfmMaNumberOfVids

The number of VIDs associated with the MA.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.8

fsMIEcfmMaRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMaMepListIdentifier

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.5.1.9

fsMIEcfmMaMepListTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.6 · 1 row entry · 2 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMaMepListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMaMepListTable'

List of MEPIDs (in any bridge) that belong to the same MA.
          
Clause 12.14.6.1.3 specifies that a list of MEPIDs in all
bridges in that MA, but since SNMP SMI does not allow to
state in a MIB that an object in a table is an array, the 
information has to be stored in another table with two
indices, being the first index, the index of the table that 
contains the list or array.

fsMIEcfmMaMepListEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.6.1

The known MEPS table entry.

Indexes

Column Syntax OID

fsMIEcfmMaMepListIdentifier

MEPID

FsMIEcfmMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.10876.101.1.160.1.0.6.1.1

fsMIEcfmMaMepListRowStatus

The status of the row. Read SNMPv2-TC (RFC1903) for an
explanation of the possible values this object can take.

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.6.1.2

fsMIEcfmMepTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.7 · 1 row entry · 46 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMepTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMepTable'

The Maintenance Association End Point (MEP) table.
          
Each row in the table represents a different MEP.  A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.18).
          
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.
          
The Transmit Loopback table.  Entries in this table are
created/removed at the same time than entries in the MEP
table are created/removed.
          
The MEP table also stores all the managed objects for sending
LBM and LTM.
          
*LBM Managed objects
          
LBM Managed objects in the MEP table 
enables the management entity to initiate
transmission of Loopback messages.  It will signal the MEP
that it should transmit some number of Loopback messages
and detect the detection (or lack thereof) of the
corresponding Loopback messages.
          
Steps to use entries in this table:
          
1) Wait for fsMIEcfmMepTransmitLbmStatus value to be
   'ready'.  To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and
      fsMIEcfmMepTransmitLbmStatus objects (in same SNMP
      PDU).
   b. Check if value for fsMIEcfmMepTransmitLbmStatus is
      'ready'
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go
        to step 2) below
2) Change fsMIEcfmMepTransmitLbmStatus value from 'ready' to
   'notReady' to ensure no other management entity will use
   the service. In order to not disturb a possible other NMS
   do this by sending an SNMP SET for both SnmpSetSerialNo 
   and fsMIEcfmMepTransmitLbmStatus objects (in same SNMP
   PDU,  and make sure SNmpSetSerialNo is the first varBind).
   For the SnmpSetSerialNo varBind, use the value that you
   obtained in step 1)a.. This ensures that two cooperating
   NMSes will not step on each others toes.
3) Setup the different data to be sent (number of messages,
   optional TLVs,...).
4) Record the current values of fsMIEcfmMepLbrIn,
   fsMIEcfmMepLbrInOutOfOrder, and fsMIEcfmMepLbrBadMsdu.
6) Change fsMIEcfmMepTransmitLbmStatus value from 'notReady'
   to 'transmit' to initiate transmission of Loopback
   messages.
7) Check the value of fsMIEcfmMepTransmitLbmResultOK to
   find out if the operation was successfully initiated or
   not.
8) Monitor the value of fsMIEcfmMepTransmitLbmMessages.
   When it reaches 0, the last LBM has been transmitted.
   Wait an additional 5 seconds to ensure that all LBRs have
   been returned.
9) Compare fsMIEcfmMepLbrIn, fsMIEcfmMepLbrInOutOfOrder,
   and fsMIEcfmMepLbrBadMsdu to their old values from step
   4, above, to get the results of the test.
10) Change the fsMIEcfmMepTransmitLbmStatus value back to
   'ready' to allow other management entities to use the
   table.
          
*LTM Managed objects
The LTM Managed objects in the MEP table are used in a manner
similar to that described for LBM transmission, above.  Upon
successfully initiating the transmission, the variables
fsMIEcfmMepTransmitLtmSeqNumber and
fsMIEcfmMepTransmitLtmEgressIdentifier return the information
required to recover the results of the LTM from the
fsMIEcfmLtrTable.

fsMIEcfmMepEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.7.1

The MEP table entry

Indexes

Column Syntax OID

fsMIEcfmMepIdentifier

Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
…

FsMIEcfmMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.1

fsMIEcfmMepIfIndex

This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.

Upon a restart of the system, the system SHAL…

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.2

fsMIEcfmMepDirection

The direction in which the MEP faces on the Bridge port.

FsMIEcfmMpDirectionr/w

Type Values:

1	down
2	up

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.3

fsMIEcfmMepPrimaryVid

An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or that the MEP's MA is associated with no V…

Unsigned32r/w

Constraints:
range: 0-16777215

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.4

fsMIEcfmMepActive

Administrative state of the MEP

A Boolean indicating the administrative state of the MEP.

True indicates that the MEP is to function normally, and
false that it is to cease functioning.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.5

fsMIEcfmMepFngState

Current state of the MEP Fault Notification Generator
State Machine.

FsMIEcfmFngState

Type Values:

1	fngReset
2	fngDefect
3	fngReportDefect
4	fngDefectReported
5	fngDefectClearing

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.6

fsMIEcfmMepCciEnabled

If set to true, the MEP will generate CCM messages.

fsMIEcfmMepCcmLtmPriority

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.7

The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default va…

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.8

fsMIEcfmMepMacAddress

MAC address of the MEP. For MEPs that do not possess a MAC address
this value will be all zeros. Such a MEP will be present in the
MPLS TP transport networks.

fsMIEcfmMepHighestPrDefect

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.9

fsMIEcfmMepLowPrDef

An integer value specifying the lowest priority defect
that is allowed to generate fault alarm.

FsMIEcfmLowestAlarmPrir/w

Type Values:

1	allDef
2	macRemErrXcon
3	remErrXcon
4	errXcon
5	xcon
6	noXcon

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.10

fsMIEcfmMepFngAlarmTime

The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s).

Integer32r/w

Constraints:
range: 250-1000

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.11

fsMIEcfmMepFngResetTime

The time that defects must be absent before re-enabling a
Fault Alarm (fngResetTime, 20.33.4) (default 10s).

Integer32r/w

Constraints:
range: 250-1000

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.12

The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.

FsMIEcfmHighestDefectPri

Type Values:

0	none
1	defRDICCM
2	defMACstatus
3	defRemoteCCM
4	defErrorCCM
5	defXconCCM

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.13

fsMIEcfmMepDefects

A vector of Boolean error conditions from Table 20-1, any of
which may be true:

DefRDICCM(1)
DefMACstatus(2)
DefRemoteCCM(3)
DefErrorCCM(4)
DefXconCCM(5)

FsMIEcfmMepDefects

Type Values:

0	bUnUsedBit
1	bDefRDICCM
2	bDefMACstatus
3	bDefRemoteCCM
4	bDefErrorCCM
5	bDefXconCCM

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.14

fsMIEcfmMepErrorCcmLastFailure

The last-received CCM that triggered an DefErrorCCM fault.

OctetString

Constraints:
range: 1-1522

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.15

fsMIEcfmMepXconCcmLastFailure

The last-received CCM that triggered a DefXconCCM fault.

OctetString

Constraints:
range: 1-1522

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.16

fsMIEcfmMepCcmSequenceErrors

The total number of out-of-sequence CCMs received from all
remote MEPs.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.17

fsMIEcfmMepCciSentCcms

Total number of Continuity Check messages transmitted.

fsMIEcfmMepNextLbmTransId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.18

Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.19

fsMIEcfmMepLbrIn

Total number of valid, in-order Loopback Replies received.

fsMIEcfmMepLbrInOutOfOrder

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.20

The total number of valid, out-of-order Loopback Replies
received.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.21

fsMIEcfmMepLbrBadMsdu

(optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3).

fsMIEcfmMepLtmNextSeqNumber

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.22

Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.23

fsMIEcfmMepUnexpLtrIn

The total number of unexpected LTRs received (20.39.1).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.24

fsMIEcfmMepLbrOut

Total number of Loopback Replies transmitted.

fsMIEcfmMepTransmitLbmStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.25

A Enumerated value set to 'transmit'to initiate LBM transmission.
Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine.

FsMIEcfmTransmitStatusr/w

Type Values:

0	ready
1	notReady
2	transmit

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.26

fsMIEcfmMepTransmitLbmDestMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmMepTransmitLbmDestIsMepId is 'false'.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.27

fsMIEcfmMepTransmitLbmDestMepId

The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
fsMIEcfmMepTransmitLbmDestIsMepId …

FsMIEcfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.28

fsMIEcfmMepTransmitLbmDestIsMepId

True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.

fsMIEcfmMepTransmitLbmMessages

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.29

The number of Loopback messages to be transmitted.

Integer32r/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.30

fsMIEcfmMepTransmitLbmDataTlv

An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.

OctetStringr/w

Constraints:
range: 0-1500

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.31

fsMIEcfmMepTransmitLbmVlanPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.

The default value is CCM priority.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.32

fsMIEcfmMepTransmitLbmVlanDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.

For more information about VLAN Drop Enable, please check
IEEE 802.1ad.

fsMIEcfmMepTransmitLbmResultOK

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.33

Indicates the result of the operation:

- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.

fsMIEcfmMepTransmitLbmSeqNumber

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.34

The Loopback Transaction Identifier
(fsMIEcfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
fsMIEcfmMepTransmitLbmResultOK is false.

fsMIEcfmMepTransmitLtmStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.35

A Enumerated value set to 'transmit' to initiate LTM transmission.
Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State
Machine.

FsMIEcfmTransmitStatusr/w

Type Values:

0	ready
1	notReady
2	transmit

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.36

fsMIEcfmMepTransmitLtmFlags

The flags field for LTMs transmitted by the MEP.

Bitsr/w

Enumerated Values:

0	useFDBonly

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.37

fsMIEcfmMepTransmitLtmTargetMacAddress

The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
fsMIEcfmMepTransmitLtmTargetIsMepId is 'false'.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.38

fsMIEcfmMepTransmitLtmTargetMepId

An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
f…

FsMIEcfmMepIdOrZeror/w

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.39

fsMIEcfmMepTransmitLtmTargetIsMepId

True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.

fsMIEcfmMepTransmitLtmTtl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.40

The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
handles the LTM. The value received in the …

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.41

fsMIEcfmMepTransmitLtmResult

Indicates the result of the operation:

- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent

fsMIEcfmMepTransmitLtmSeqNumber

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.42

The LTM Transaction Identifier
(fsMIEcfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
fsMIEcfmMepTransmitLtmResult is false.

fsMIEcfmMepTransmitLtmEgressIdentifier

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.43

Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
unique to the system in which the MEP Linkt…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.44

fsMIEcfmMepRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier fsMIEcfmLtrSeqNumber fsMIEcfmLtrReceiveOrder

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.45

fsMIEcfmMepCcmOffload

The administrative MEP CCMOffloading status.
when value 'enabled' (1) is set The CCM Offloading starts for
the MEP in the system.when value 'disabled' (2) is set then
CCMOffloading will disabled for the MEP in system.…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.46

fsMIEcfmLtrTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.8 · 1 row entry · 21 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmLtrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmLtrTable'

This table extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
          
SNMP SMI does not allow to state in a MIB that an object in
a table is an array.  The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIEcfmLtrEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.8.1

The Linktrace Reply table entry.

Indexes

Column Syntax OID

fsMIEcfmLtrSeqNumber

Transaction identifier/Sequence number returned by a previous
transmit linktrace message command, indicating which LTM's
response is going to be returned.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.1

fsMIEcfmLtrReceiveOrder

An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. fsMIEcfmLtrReceiveOrder
are assigned sequentially from 1, in the order that the
Linktrace Initiator received the LTRs.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.2

fsMIEcfmLtrTtl

TTL field value for a returned LTR.

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.3

fsMIEcfmLtrForwarded

Indicates if a LTM was forwarded by the responding MP, as
returned in the 'FwdYes' flag of the flags field.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.4

fsMIEcfmLtrTerminalMep

A boolean value stating whether the forwarded LTM reached a
MEP enclosing its MA, as returned in the Terminal MEP flag of
the Flags field.

fsMIEcfmLtrLastEgressIdentifier

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.5

An octet field holding the Last Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR.
The Last Egress Identifier identifies the MEP Linktrace
Initiator that originated, or the Linktrace Responder that…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.6

fsMIEcfmLtrNextEgressIdentifier

An octet field holding the Next Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR. The Next Egress
Identifier Identifies the Linktrace Responder that
transmitted this LTR, and can forward the LTM t…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.7

fsMIEcfmLtrRelay

Value returned in the Relay Action field.

FsMIEcfmRelayActionFieldValue

Type Values:

1	rlyHit
2	rlyFdb
3	rlyMpdb

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.8

fsMIEcfmLtrChassisIdSubtype

This object specifies the format of the Chassis ID returned
in the Sender ID TLV of the LTR, if any. This value is
meaningless if the fsMIEcfmLtrChassisId has a length of 0.

LLDP-MIBLldpChassisIdSubtype

Type Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.9

fsMIEcfmLtrChassisId

The Chassis ID returned in the Sender ID TLV of the LTR, if
any. The format of this object is determined by the
value of the fsMIEcfmLtrChassisIdSubtype object.

LLDP-MIBLldpChassisId

Type Constraints:
range: 1..255

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.10

fsMIEcfmLtrManAddressDomain

The TDomain that identifies the type and format of
the related fsMIEcfmMepDbManAddress object, used to access
the SNMP agent of the system transmitting the LTR. Received
in the LTR Sender ID TLV from that system.
…

SNMPv2-TCTDomain

Description:

Denotes a kind of transport service.

Some possible values, such as snmpUDPDomain, are defined in
the SNMPv2-TM MIB module. Other possible values are defined
in other MIB modules.

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.11

fsMIEcfmLtrManAddress

The TAddress that can be used to access the SNMP
agent of the system transmitting the CCM, received in the CCM
Sender ID TLV from that system.

If the related object fsMIEcfmLtrManAddressDomain contains
th…

SNMPv2-TCTAddress

Type Constraints:
range: 1..255

Description:

Denotes a transport service address.

A TAddress value is always interpreted within the context of a
TDomain value. Thus, each definition of a TDomain value must
be accompanied by a definition of a textual co…

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.12

fsMIEcfmLtrIngress

The value returned in the Ingress Action Field of the LTM.

FsMIEcfmIngressActionFieldValue

Type Values:

1	ingOk
2	ingDown
3	ingBlocked
4	ingVid

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.13

fsMIEcfmLtrIngressMac

MAC address returned in the ingress MAC address field.

fsMIEcfmLtrIngressPortIdSubtype

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.14

Format of the Ingress Port ID.

LLDP-MIBLldpPortIdSubtype

Type Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.15

fsMIEcfmLtrIngressPortId

Ingress Port ID. The format of this object is determined by
the value of the fsMIEcfmLtrIngressPortIdSubtype object.

LLDP-MIBLldpPortId

Type Constraints:
range: 1..255

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.16

fsMIEcfmLtrEgress

The value returned in the Egress Action Field of the LTM.

FsMIEcfmEgressActionFieldValue

Type Values:

1	egrOK
2	egrDown
3	egrBlocked
4	egrVid

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.17

fsMIEcfmLtrEgressMac

MAC address returned in the egress MAC address field.

fsMIEcfmLtrEgressPortIdSubtype

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.18

Format of the egress Port ID.

LLDP-MIBLldpPortIdSubtype

Type Values:

1	interfaceAlias
2	portComponent
3	macAddress
4	networkAddress
5	interfaceName
6	agentCircuitId
7	local

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.19

fsMIEcfmLtrEgressPortId

Egress Port ID. The format of this object is determined by
the value of the fsMIEcfmLtrEgressPortIdSubtype object.

LLDP-MIBLldpPortId

Type Constraints:
range: 1..255

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.20

fsMIEcfmLtrOrganizationSpecificTlv

All Organization specific TLVs returned in the LTR, if
any. Includes all octets including and following the TLV
Length field of each TLV, concatenated together.

OctetString

Constraints:
range: 4-1500
range: 0-0

.1.3.6.1.4.1.10876.101.1.160.1.0.8.1.21

fsMIEcfmMepDbTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.9 · 1 row entry · 11 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMepDbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMepDbTable'

The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.
          
The SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.

fsMIEcfmMepDbEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.9.1

The MEP Database table entry.

Indexes

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier fsMIEcfmMepDbRMepIdentifier

Column Syntax OID

fsMIEcfmMepDbRMepIdentifier

Maintenance association End Point Identifier of a remote MEP
whose information from the MEP Database is to be returned.

FsMIEcfmMepId

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.1

fsMIEcfmMepDbRMepState

The operational state of the remote MEP IFF State machines.

FsMIEcfmRemoteMepState

Type Values:

1	rMepIdle
2	rMepStart
3	rMepFailed
4	rMepOk

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.2

fsMIEcfmMepDbRMepFailedOkTime

The time (SysUpTime) at which the IFF Remote MEP state machine
last entered either the RMEP_FAILED or RMEP_OK state.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.3

fsMIEcfmMepDbMacAddress

The MAC address of the remote MEP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.4

fsMIEcfmMepDbRdi

State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.

fsMIEcfmMepDbPortStatusTlv

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.5

An enumerated value of the Port status TLV received in the
last CCM from the remote MEP or the default value
psNoPortStateTLV indicating either no CCM has been received,
or that nor port status TLV was received in the l…

FsMIEcfmPortStatus

Type Values:

0	psNoPortStateTLV
1	psBlocked
2	psUp

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.6

fsMIEcfmMepDbInterfaceStatusTlv

An enumerated value of the Interface status TLV received
in the last CCM from the remote MEP or the default value
isNoInterfaceStatus TLV indicating either no CCM has been
received, or that no interface status TLV was r…

FsMIEcfmInterfaceStatus

Type Values:

0	isNoInterfaceStatusTLV
1	isUp
2	isDown
3	isTesting
4	isUnknown
5	isDormant
6	isNotPresent
7	isLowerLayerDown

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.7

fsMIEcfmMepDbChassisIdSubtype

This object specifies the format of the Chassis ID received
in the last CCM.

LLDP-MIBLldpChassisIdSubtype

Type Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.8

fsMIEcfmMepDbChassisId

The Chassis ID. The format of this object is determined by the
value of the fsMIEcfmLtrChassisIdSubtype object.

LLDP-MIBLldpChassisId

Type Constraints:
range: 1..255

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.9

fsMIEcfmMepDbManAddressDomain

The TDomain that identifies the type and format of
the related fsMIEcfmMepDbManAddress object, used to access
the SNMP agent of the system transmitting the CCM. Received
in the CCM Sender ID TLV from that system.
…

SNMPv2-TCTDomain

Description:

Denotes a kind of transport service.

Some possible values, such as snmpUDPDomain, are defined in
the SNMPv2-TM MIB module. Other possible values are defined
in other MIB modules.

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.10

fsMIEcfmMepDbManAddress

The TAddress that can be used to access the SNMP
agent of the system transmitting the CCM, received in the CCM
Sender ID TLV from that system.

If the related object fsMIEcfmMepDbManAddressDomain contains
…

SNMPv2-TCTAddress

Type Constraints:
range: 1..255

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.9.1.11

fsMIEcfmMipCcmDbTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.10 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMipCcmDbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMipCcmDbTable'

It is a list of every distinct {FID, source_address, 
IfIndex} triple from all of the CCMs presented
to all of the Bridge.s MPs. Continuity Check Receivers
since the Bridge was last reset. Entries in the MIP CCM
Database are timed out very slowly, on the order of one day,
so that their information is available for fault isolation long 
after the information is no longer used for frame forwarding.

fsMIEcfmMipCcmDbEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.10.1

The MIP CCM DB table entry

Indexes

fsMIEcfmContextId fsMIEcfmMipCcmFid fsMIEcfmMipCcmSrcAddr

Column	Syntax	OID
fsMIEcfmMipCcmFid The Filtering database id (FID) is the VLAN ID of MEP from which CCM is recieved, that will be used along with source MacAddress for frame forwarding.	Unsigned32 Constraints: `range: 1-4094`	`.1.3.6.1.4.1.10876.101.1.160.1.0.10.1.1`
fsMIEcfmMipCcmSrcAddr Mac Address of the MEP from which CCM is recieved.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.10876.101.1.160.1.0.10.1.2`
fsMIEcfmMipCcmIfIndex Index of interface through which CCM is recieved.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.10876.101.1.160.1.0.10.1.3`

fsMIEcfmRemoteMepDbExTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.11 · 1 row entry · 13 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmRemoteMepDbExTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmRemoteMepDbExTable'

The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.

fsMIEcfmRemoteMepDbExEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.11.1

The MEP Database table entry.

Indexes

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier fsMIEcfmMepDbRMepIdentifier

Column Syntax OID

fsMIEcfmRMepCcmSequenceNum

Sequence Number of CCM sent by Remote MEP

fsMIEcfmRMepPortStatusDefect

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.1

A Boolean indicating that the remote MEP is reporting a failure
in its Port-Status TLV

fsMIEcfmRMepInterfaceStatusDefect

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.2

A Boolean indicating that the remote MEP is reporting a failure
in its Interface-Status TLV

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.3

fsMIEcfmRMepCcmDefect

A Boolean indicating that no CCM has been received from the
remote MEP for at least (3.25*CCMtime(CCMinterval)) seconds

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.4

fsMIEcfmRMepRDIDefect

A Boolean indicating that RDI flag is received from the remote
MEP

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.5

fsMIEcfmRMepMacAddress

The MAC address of the remote MEP.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.6

fsMIEcfmRMepRdi

State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.

fsMIEcfmRMepPortStatusTlv

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.7

FsMIEcfmPortStatusr/w

Type Values:

0	psNoPortStateTLV
1	psBlocked
2	psUp

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.8

fsMIEcfmRMepInterfaceStatusTlv

FsMIEcfmInterfaceStatusr/w

Type Values:

0	isNoInterfaceStatusTLV
1	isUp
2	isDown
3	isTesting
4	isUnknown
5	isDormant
6	isNotPresent
7	isLowerLayerDown

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.9

fsMIEcfmRMepChassisIdSubtype

This object specifies the format of the Chassis ID received
in the last CCM.

LLDP-MIBLldpChassisIdSubtyper/w

Type Values:

1	chassisComponent
2	interfaceAlias
3	portComponent
4	macAddress
5	networkAddress
6	interfaceName
7	local

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.10

fsMIEcfmRMepDbChassisId

The Chassis ID. The format of this object is determined by the
value of the dot1agCfmLtrChassisIdSubtype object.

LLDP-MIBLldpChassisIdr/w

Type Constraints:
range: 1..255

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.11

fsMIEcfmRMepManAddressDomain

The TDomain that identifies the type and format of
the related dot1agCfmMepDbManAddress object, used to access
the SNMP agent of the system transmitting the CCM. Received
in the CCM Sender ID TLV from that system.
…

SNMPv2-TCTDomainr/w

Description:

Denotes a kind of transport service.

Some possible values, such as snmpUDPDomain, are defined in
the SNMPv2-TM MIB module. Other possible values are defined
in other MIB modules.

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.12

fsMIEcfmRMepManAddress

The TAddress that can be used to access the SNMP
agent of the system transmitting the CCM, received in the CCM
Sender ID TLV from that system.

If the related object fsMIEcfmRMepManAddressDomain contains
t…

SNMPv2-TCTAddressr/w

Type Constraints:
range: 1..255

Description:

.1.3.6.1.4.1.10876.101.1.160.1.0.11.1.13

fsMIEcfmLtmTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.12 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmLtmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmLtmTable'

This table contains a list of parameters with which the linktrace
messages were transmitted/initiated by MEP

fsMIEcfmLtmEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.12.1

The Linktrace Message table entry.

Indexes

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier fsMIEcfmLtmSeqNumber

Column	Syntax	OID
fsMIEcfmLtmSeqNumber Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.12.1.1`
fsMIEcfmLtmTargetMacAddress The Target MAC Address of MP for which LTM has been initiated : A unicast destination MAC address.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.10876.101.1.160.1.0.12.1.2`
fsMIEcfmLtmTtl The LTM TTL field, with which LTM has been initiated. The TTL field indicates the number of hops expected to be covered by the LTM, decremented by 1 by each Linktrace Responder that handles the LTM. The value received …	Unsigned32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.10876.101.1.160.1.0.12.1.3`

fsMIEcfmMepExTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.13 · 1 row entry · 7 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMepExTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMepExTable'

The Maintenance Association End Point (MEP) table.
          
Each row in the table represents a different MEP.  A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses.  It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.18).
          
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.

fsMIEcfmMepExEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.13.1

The MEP Database table entry.

Indexes

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex fsMIEcfmMepIdentifier

Column Syntax OID

fsMIEcfmXconnRMepId

MEP Identifier of the Remote MEP which caused the cross-connect
defect, 0 indicates that no remote MEP is cross-connected.

Unsigned32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.1

fsMIEcfmErrorRMepId

MEP Identifier of the Remote MEP which caused the error CCM
defect, 0 indicates that no errored CCM is recieved from any remote MEP.

Unsigned32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.2

fsMIEcfmMepDefectRDICcm

A Boolean indicating the aggregate health of the remote MEPs.
True indicates that at least one of the Remote MEP state
machines is receiving valid CCMs from its remote MEP that
have the RDI bit set, and false that no R…

fsMIEcfmMepDefectMacStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.3

A Boolean indicating that one or more of the remote MEPs is
reporting a failure in its Port Status TLV or Interface Status TLV .

fsMIEcfmMepDefectRemoteCcm

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.4

A Boolean indicating the aggregate state of the Remote MEP state
machines. True indicates that at least one of the Remote MEP state
machines is not receiving valid CCMs from its remote MEP, and false
that all Remote ME…

fsMIEcfmMepDefectErrorCcm

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.5

A Boolean flag set and cleared by the Remote MEP Error state
machine to indicate that one or more invalid CCMs has been received,
and that 3.5 times that CCM.s transmission interval has not yet expired.

fsMIEcfmMepDefectXconnCcm

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.6

A Boolean flag set and cleared by the MEP Cross Connect state
machine to indicate that one or more crossconnect CCMs has been
received, and that 3.5 times of at least one of those CCMs.
transmission interval has not yet…

fsMIEcfmContextId fsMIEcfmMdIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.0.13.1.7

fsMIEcfmMdExTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.14 · 1 row entry · 1 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMdExTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMdExTable'

The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain. A Maintenance Domain
is described in 802.1ag (3.22) as the network or the part of the
network for which faults in connectivity are to be managed. The
boundary of a Maintenance Domain is defined by a set of DSAPs, 
each of which can become a point of connectivity to a service
instance.

fsMIEcfmMdExEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.14.1

The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.

Indexes

Column	Syntax	OID
fsMIEcfmMepArchiveHoldTime Number of minutes that data from a remote MEP is kept before it is purged.	Integer32r/w Constraints: `range: 100-65535`	`.1.3.6.1.4.1.10876.101.1.160.1.0.14.1.1`

fsMIEcfmMaExTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.15 · 1 row entry · 1 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMaExTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMaExTable'

The Maintenance Association table.  Each row in the table
represents an MA.  An MA is a set of MEPs, each configured
with a single service instance.
          
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs.  Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity.  The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance.  Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances.  A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.17 and 18.2).
          
This table uses two indices, first index is the index of the
Maintenance Domain table.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

fsMIEcfmMaExEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.15.1

The MA table entry.

Indexes

fsMIEcfmContextId fsMIEcfmMdIndex fsMIEcfmMaIndex

Column Syntax OID

fsMIEcfmMaCrosscheckStatus

The administrative status of MA Crosscheck .
This enables or disables cross checking between the list of
configured remote maintenance end points (MEPs)of a domain and
MEPs learned through continuity check messages (CC…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.0.15.1.1

fsMIEcfmStatsTable

table

.1.3.6.1.4.1.10876.101.1.160.1.0.16 · 1 row entry · 16 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmStatsTable'

List of per virtual context ECFM Module Statistics parameters.

fsMIEcfmStatsEntry row .1.3.6.1.4.1.10876.101.1.160.1.0.16.1

Per virtual context ECFM Module Statistics parameters.

Indexes

fsMIEcfmContextId

Column	Syntax	OID
fsMIEcfmTxCfmPduCount Identifies the number of CFM-PDUs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.1`
fsMIEcfmTxCcmCount Identifies the number of CCMs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.2`
fsMIEcfmTxLbmCount Identifies the number of LBMs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.3`
fsMIEcfmTxLbrCount Identifies the number of LBRs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.4`
fsMIEcfmTxLtmCount Identifies the number of LTMs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.5`
fsMIEcfmTxLtrCount Identifies the number of LTRs transmitted.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.6`
fsMIEcfmTxFailedCount Identifies the number of CFM-PDU tranmission failed.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.7`
fsMIEcfmRxCfmPduCount Identifies the number of CFM-PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.8`
fsMIEcfmRxCcmCount Identifies the number of CCMs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.9`
fsMIEcfmRxLbmCount Identifies the number of LBMs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.10`
fsMIEcfmRxLbrCount Identifies the number of LBRs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.11`
fsMIEcfmRxLtmCount Identifies the number of LTMs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.12`
fsMIEcfmRxLtrCount Identifies the number of LTRs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.13`
fsMIEcfmRxBadCfmPduCount Identifies the number of Bad CFM-PDUs received.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.14`
fsMIEcfmFrwdCfmPduCount Identifies the number of CFM-PDUs forwarded.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.15`
fsMIEcfmDsrdCfmPduCount Identifies the number of CFM-PDUs discarded.	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.160.1.0.16.1.16`

fsMIEcfmPortTable

table

.1.3.6.1.4.1.10876.101.1.160.1.1.3 · 1 row entry · 19 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmPortTable'

Port Table

fsMIEcfmPortEntry row .1.3.6.1.4.1.10876.101.1.160.1.1.3.1

List of Port related Parameters for ecfm module.

Indexes

fsMIEcfmPortIfIndex

Column Syntax OID

fsMIEcfmPortIfIndex

Interface Index of the Bridge port.

fsMIEcfmPortLLCEncapStatus

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.1

Indicates the LLC encapsulation status.
If set to true then LLC SNAP header shall be added to the
transmitted CFM PDUs. Otherwise, LLC SNAP header shall not
be added.

fsMIEcfmPortTxCfmPduCount

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.2

fsMIEcfmPortModuleStatus

The administrative module status of Ethernet CFM module.
This enables or disables ECFM in the system.
If set to enable, enables the ECFM for a
particular port. Otherwise, disables ECFM for a particular
port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.3

Identifies the number of CFM-PDUs transmitted.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.4

fsMIEcfmPortTxCcmCount

Identifies the number of CCMs transmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.5

fsMIEcfmPortTxLbmCount

Identifies the number of LBMs transmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.6

fsMIEcfmPortTxLbrCount

Identifies the number of LBRs transmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.7

fsMIEcfmPortTxLtmCount

Identifies the number of LTMs transmitted

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.8

fsMIEcfmPortTxLtrCount

Identifies the number of LTRs transmitted

fsMIEcfmPortTxFailedCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.9

Identifies the number of CFM-PDU tranmission failed

fsMIEcfmPortRxCfmPduCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.10

Identifies the number of CFM-PDUs received

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.11

fsMIEcfmPortRxCcmCount

Identifies the number of CCMs received

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.12

fsMIEcfmPortRxLbmCount

Identifies the number of LBMs received

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.13

fsMIEcfmPortRxLbrCount

Identifies the number of LBRs received

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.14

fsMIEcfmPortRxLtmCount

Identifies the number of LTMs received

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.15

fsMIEcfmPortRxLtrCount

Identifies the number of LTRs received

fsMIEcfmPortRxBadCfmPduCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.16

Identifies the number of Bad CFM-PDUs received

fsMIEcfmPortFrwdCfmPduCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.17

Identifies the number of CFM-PDUs forwarded

fsMIEcfmPortDsrdCfmPduCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.18

Identifies the number of CFM-PDUs discarded

fsMIEcfmStackIfIndex fsMIEcfmStackVlanIdOrNone fsMIEcfmStackMdLevel fsMIEcfmStackDirection

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.3.1.19

fsMIEcfmStackTable

table

.1.3.6.1.4.1.10876.101.1.160.1.1.4 · 1 row entry · 8 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmStackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmStackTable'

There is one CFM Stack table per bridge. It permits
the retrieval of information about the Maintenance Points
configured on any given interface.

fsMIEcfmStackEntry row .1.3.6.1.4.1.10876.101.1.160.1.1.4.1

The Stack table entry

Indexes

Column Syntax OID

fsMIEcfmStackIfIndex

This object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured.

Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable, and …

fsMIEcfmStackVlanIdOrNone

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.1

VLAN ID to which the MP is attached, or 0, if none.

Q-BRIDGE-MIBVlanIdOrNone

Type Constraints:
range: 0..4094

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.2

fsMIEcfmStackMdLevel

MD Level of the Maintenance Point.

FsMIEcfmMDLevel

Type Constraints:
range: 0..7

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.3

fsMIEcfmStackDirection

Direction in which the MP faces on the Bridge Port

FsMIEcfmMpDirection

Type Values:

1	down
2	up

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.4

fsMIEcfmStackMdIndex

The index of the Maintenance Domain in the fsMIEcfmMdTable
to which the MP is associated, or 0, if none.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.5

fsMIEcfmStackMaIndex

The index of the MA in the fsMIEcfmMaTable to which the MP
is associated, or 0, if none.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.6

fsMIEcfmStackMepId

If an MEP is configured, the MEPID, else 0

FsMIEcfmMepIdOrZero

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.7

fsMIEcfmStackMacAddress

MAC address of the MP.

fsMIEcfmConfigErrorListVid fsMIEcfmConfigErrorListIfIndex

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.10876.101.1.160.1.1.4.1.8

fsMIEcfmConfigErrorListTable

table

.1.3.6.1.4.1.10876.101.1.160.1.1.5 · 1 row entry · 3 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmConfigErrorListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmConfigErrorListTable'

The CFM Configuration Error List table provides a list of
Interfaces and VIDs that are incorrectly configured.

fsMIEcfmConfigErrorListEntry row .1.3.6.1.4.1.10876.101.1.160.1.1.5.1

The Config Error List Table entry

Indexes

Column Syntax OID

fsMIEcfmConfigErrorListVid

The VLAN ID of the VLAN with interfaces in error.

fsMIEcfmConfigErrorListIfIndex

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.10876.101.1.160.1.1.5.1.1

This object is the logicl port number of the interface.

Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table…

fsMIEcfmConfigErrorListErrorType

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10876.101.1.160.1.1.5.1.2

A vector of Boolean error conditions from 22.2.4, any of
which may be true:

0) CFMleak;
1) ConflictingVids;
2) ExcessiveLevels;
3) OverlappedLevels.

FsMIEcfmConfigErrors

Type Values:

0	cfmLeak
1	conflictingVids
2	excessiveLevels
3	overlappedLevels

.1.3.6.1.4.1.10876.101.1.160.1.1.5.1.3

fsMIEcfmMipTable

table

.1.3.6.1.4.1.10876.101.1.160.1.1.6 · 1 row entry · 5 columns

Open in standard view

Uses the supermicro variant from /opt/observium/mibs/supermicro.

Command help

Walk fsMIEcfmMipTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-ECFM-MI-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-ECFM-MI-MIB::fsMIEcfmMipTable'

The Maintenance Intermediate Point (MIP) table.
          
Each row in the table represents a different MIP. 
A MIP consists two MIP Half Functions (MHFs) on a 
single Bridge Port, an Up MHF and a Down MHF.

fsMIEcfmMipEntry row .1.3.6.1.4.1.10876.101.1.160.1.1.6.1

The MIP table entry

Indexes

fsMIEcfmMipIfIndex fsMIEcfmMipMdLevel fsMIEcfmMipVid

Column Syntax OID

fsMIEcfmMipIfIndex

This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MIP is attached.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.10876.101.1.160.1.1.6.1.1

fsMIEcfmMipMdLevel

The Maintenance Domain Level at which MIP is configured.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.1.160.1.1.6.1.2

fsMIEcfmMipVid

Vlan Identifier to which MIP is attached.

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.10876.101.1.160.1.1.6.1.3

fsMIEcfmMipActive

Administrative state of the MIP

A Boolean indicating the administrative state of the MIP.

True indicates that the MIP is to function normally, and
false that it is to cease functioning.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.10876.101.1.160.1.1.6.1.4

fsMIEcfmMipRowStatus

The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.