SUPERMICRO-DIFFSERV-MIB Table View

This table contains the Multifield Classifier details.

fsDiffServMultiFieldClfrEntry row .1.3.6.1.4.1.10876.101.1.83.1.2.1.1

An IP Multi-field Classifier entry describes a single MF Classifier.

Indexes

fsDiffServMultiFieldClfrId

Column	Syntax	OID
fsDiffServMultiFieldClfrId An index that enumerates the MultiField Classifier filter.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.2.1.1.1
fsDiffServMultiFieldClfrFilterId This Object specifies the ID of the filter the details of which should be matched against the incoming packet	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.2.1.1.2
fsDiffServMultiFieldClfrFilterType This Object specifies the type of the filter	Enumerationr/w Enumerated Values: 1 macfilter 2 ipfilter	.1.3.6.1.4.1.10876.101.1.83.1.2.1.1.3
fsDiffServMultiFieldClfrStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.2.1.1.4

This table contains the Multifield filter details.

fsDiffServClfrEntry row .1.3.6.1.4.1.10876.101.1.83.1.3.1.1

An entry in the classifier table describes a single classifier.
All classifier elements belonging to the same classifier use the
classifier's fsDiffServClfrId as part of their index.

Indexes

fsDiffServClfrId

Column	Syntax	OID
fsDiffServClfrId An index that enumerates the classifier entries.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.3.1.1.1
fsDiffServClfrMFClfrId The Object refers to a MultiField Classifier Id which is the index for the MF Classifier table. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.83.1.3.1.1.2
fsDiffServClfrInProActionId The Object refers to a In Profile Action Id which is the index for the InProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.83.1.3.1.1.3
fsDiffServClfrOutProActionId The Object refers to a Out Profile Action Id which is the index for the OutProfile Action Table. A Valid value of this object is not mandatory for the creation of an entry in this table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.83.1.3.1.1.4
fsDiffServClfrStatus The status of this conceptual row. The objects fsDiffServClfrInProActionId and fsDiffServClfrOutProActionId can be modified at any time. But the other Objects can not be modified when the RowStatus is 'active'for the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.3.1.1.5

The Action Table enumerates actions that can be performed to a
stream of traffic which is inprofile.For example, traffic exiting 
from a meter may be counted, marked, and potentially dropped before
entering a queue.

fsDiffServInProfileActionEntry row .1.3.6.1.4.1.10876.101.1.83.1.4.1.1

Each entry in the action table allows description of one of
action to be applied to traffic depending upon the treatment
selected by fsDiffServInProfileActionFlag.

Indexes

fsDiffServInProfileActionId

Column	Syntax	OID
fsDiffServInProfileActionId An index that enumerates the In Profile Action entries.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.1
fsDiffServInProfileActionFlag This Object defines the action to be performed on the packet, when the packets are found to be In profile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.2
fsDiffServInProfileActionNewPrio This Object keeps the new priority value in case the action selected by fsDiffServInProfileActionFlag is to assign a new priority/COS value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.3
fsDiffServInProfileActionIpTOS This Object keeps the new Ip TOS value in case the action selected by fsDiffServInProfileActionFlag is to assign a new Ip TOS value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.4
fsDiffServInProfileActionPort This Object keeps the new port value in case the action selected by fsDiffServInProfileActionFlag is to assign a new out port value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.5
fsDiffServInProfileActionDscp This Object keeps the new DSCP value in case the action selected by fsDiffServInProfileActionFlag is to assign a new DSCP value.	DscpOrAnyr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.6
fsDiffServInProfileActionStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.4.1.1.7

The Action Table enumerates actions that can be performed to a
stream of traffic which is out of profile.For example, traffic exiting 
from a meter may be counted, marked, and potentially dropped before
entering a queue.

fsDiffServOutProfileActionEntry row .1.3.6.1.4.1.10876.101.1.83.1.5.1.1

Each entry in the action table allows description of one of
action to be applied to traffic depending upon the treatment
selected by fsDiffServOutProfileActionFlag.

Indexes

fsDiffServOutProfileActionId

Column	Syntax	OID
fsDiffServOutProfileActionId An index that enumerates the Out Profile Action entries.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.5.1.1.1
fsDiffServOutProfileActionFlag This Object defines the action to be performed on the packet when the packets are found to be out of profile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.5.1.1.2
fsDiffServOutProfileActionDscp This Object keeps the new DSCP value in case the action selected by fsDiffServOutProfileActionFlag is to assign a new DSCP value.	DscpOrAnyr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.10876.101.1.83.1.5.1.1.3
fsDiffServOutProfileActionMID This Object keeps the Meter Id to be added to the DataPath to which this particular OutProfileAction is applicable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.83.1.5.1.1.4
fsDiffServOutProfileActionStatus The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. The row comprises of an Meter Id which is an index to the Meter Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.5.1.1.5

The Meter Table has the number of token with it and refreshCount value
for associated with the meter.

fsDiffServMeterEntry row .1.3.6.1.4.1.10876.101.1.83.1.6.1.1

An entry in the Meter Table describing a single instance of
a Metering Unit.

Indexes

fsDiffServMeterId

Column	Syntax	OID
fsDiffServMeterId An index that enumerates the Meter entries.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.6.1.1.1
fsDiffServMetertokenSize This values specifies the size of the meter bucket. The number of the token configured are dependent on support by the specific devices/hardware.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.6.1.1.2
fsDiffServMeterRefreshCount This values specifies the number of tokens to be added to the meter bucket after each 8 usec.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.83.1.6.1.1.3
fsDiffServMeterStatus The status of this conceptual row. All writable objects in this row may be modified only when this rowstatus in not active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.6.1.1.4

The Scheduler Table has the number of queues per data path and
weight associated with that.

fsDiffServSchedulerEntry row .1.3.6.1.4.1.10876.101.1.83.1.7.1.1

An entry in the Scheduler Table describing a single instance of
a scheduler.

Indexes

fsDiffServSchedulerId

Column	Syntax	OID
fsDiffServSchedulerId An index that enumerates the Scheduler entries.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.83.1.7.1.1.1
fsDiffServSchedulerDPId The Data Path Id to which this Entry of the Scheduler is added. This value is same as the index of the Data path Table.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.83.1.7.1.1.2
fsDiffServSchedulerQueueCount The value here speicifies the number of queues for a data path.	Unsigned32r/w Constraints: range: 1-4	.1.3.6.1.4.1.10876.101.1.83.1.7.1.1.3
fsDiffServSchedulerWeight The value here speicifies the weight speicified for each of the queues. Since maximum number of queues specified can be four only. This value is used one byte basis.	OctetStringr/w Constraints: range: 1-4	.1.3.6.1.4.1.10876.101.1.83.1.7.1.1.4
fsDiffServSchedulerStatus The status of this conceptual row. All writable objects in this row may be modified only when the rowstatus is not active.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.83.1.7.1.1.5