STONESOFT-NETNODE-MIB
Monitored by Observium MIB for generic network nodes
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Device identity
Status
Explore Observium network monitoring
- Source file
STONESOFT-NETNODE-MIB- Last revised
- Identity
stonesoftNetworkNodeMibModule- Base OID
1.3.6.1.4.1.1369.3.4
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TimeStamp |
| STONESOFT-SMI-MIB | stonesoftModules stonesoftNetworkNode |
Net-SNMP examples using the forcepoint MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'STONESOFT-NETNODE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'STONESOFT-NETNODE-MIB::stonesoftNetworkNodeMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'STONESOFT-NETNODE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'STONESOFT-NETNODE-MIB::stonesoftNetworkNodeMibModule'
Objects (25)
3 directly used by Observium
Showing 25 of 25 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1369.3.4 |
||
.1.3.6.1.4.1.1369.6.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.1369.6.1.1.1 |
|
|
|
.1.3.6.1.4.1.1369.6.1.1.10 |
|
.1.3.6.1.4.1.1369.6.1.1.11 |
||
.1.3.6.1.4.1.1369.6.1.1.12 |
||
.1.3.6.1.4.1.1369.6.1.1.13 |
||
|
Integer32
|
.1.3.6.1.4.1.1369.6.1.1.2 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.1369.6.1.1.3 |
|
Integer32
|
.1.3.6.1.4.1.1369.6.1.1.4 |
|
.1.3.6.1.4.1.1369.6.1.1.5 |
||
.1.3.6.1.4.1.1369.6.1.1.6 |
||
.1.3.6.1.4.1.1369.6.1.1.7 |
||
.1.3.6.1.4.1.1369.6.1.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.1369.6.1.1.7.1.1 |
|
.1.3.6.1.4.1.1369.6.1.1.7.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.1369.6.1.1.7.1.3 |
|
.1.3.6.1.4.1.1369.6.1.1.7.1.4 |
||
.1.3.6.1.4.1.1369.6.1.1.8 |
||
|
|
.1.3.6.1.4.1.1369.6.1.1.9 |
|
.1.3.6.1.4.1.1369.6.1.2 |
||
.1.3.6.1.4.1.1369.6.1.2.0 |
||
.1.3.6.1.4.1.1369.6.1.3 |
||
.1.3.6.1.4.1.1369.6.1.3.1 |
||
.1.3.6.1.4.1.1369.6.1.3.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- STONESOFT-SMI-MIBforcepoint
- STONESOFT-NETNODE-MIBforcepointselected
Conformance Groups (9)
|
A collection of objects identifying the node in a cluster
|
.1.3.6.1.4.1.1369.6.1.3.1.1
|
|
|
A collection of objects giving information about
the status of the node |
.1.3.6.1.4.1.1369.6.1.3.1.2
|
|
|
A collection of objects giving information about logins
into the node |
.1.3.6.1.4.1.1369.6.1.3.1.3
|
|
|
A collection of objects giving information about the tests
in the test subsystem of the node |
.1.3.6.1.4.1.1369.6.1.3.1.4
|
|
|
A collection of notifications informing about changes
in a node's status |
.1.3.6.1.4.1.1369.6.1.3.1.5
|
|
|
A collection of notifications informing about user logins
|
.1.3.6.1.4.1.1369.6.1.3.1.6
|
|
|
A collection of notifications informing about test failures
|
.1.3.6.1.4.1.1369.6.1.3.1.7
|
|
|
A collection of objects giving information about
hardware monitoring events in the node |
.1.3.6.1.4.1.1369.6.1.3.1.8
|
|
|
A collection of notifications informing about
hardware monitoring issues |
.1.3.6.1.4.1.1369.6.1.3.1.9
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.1369.6.1.3.2.1The compliance statement for network nodes
Required groups
| mandatory | nodeStatusGroup | |
| mandatory | nodeStatusNotificationsGroup | |
| optional | nodeIdentificationGroup | This group is mandatory for nodes that are part of a cluster |
| optional | nodeLoginGroup |
This group should be implemented by the nodes that allow user logins |
| optional | nodeLoginNotificationsGroup |
This group should be implemented by the nodes that allow user logins |
| optional | nodeTesterGroup |
This group should be implemented by the nodes that have a tester subsystem |
| optional | nodeTesterNotificationsGroup |
This group should be implemented by the nodes that have a tester subsystem |
| optional | nodeHwmonGroup |
This group should be implemented by the nodes that have a hardware monitoring subsystem |
| optional | nodeHwmonNotificationsGroup |
This group should be implemented by the nodes that have a hardware monitoring subsystem |
Notifications / Traps (9)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.1369.6.1.2.0.1 |
A node has gone to an online state
|
|
.1.3.6.1.4.1.1369.6.1.2.0.2 |
A node has gone to an offline
or standby state |
|
.1.3.6.1.4.1.1369.6.1.2.0.3 |
A node has booted up
|
|
.1.3.6.1.4.1.1369.6.1.2.0.4 |
A node is shutting down
|
|
.1.3.6.1.4.1.1369.6.1.2.0.5 |
A user has started a login session
|
|
.1.3.6.1.4.1.1369.6.1.2.0.6 |
NodeTest has failed
|
|
.1.3.6.1.4.1.1369.6.1.2.0.7 |
Hardware monitoring system has detected problems
|
|
.1.3.6.1.4.1.1369.6.1.2.0.8 |
Failed user login
|
|
.1.3.6.1.4.1.1369.6.1.2.0.9 |
A user has finished session
|