Standard view Table view

SNR-ERD-4

Monitored by Observium 
        The MIB module for SNR-ERD-4
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors Status
Explore Observium network monitoring
Source file
SNR-ERD-4
Last revised
Identity
snr-erd-4
Base OID
1.3.6.1.4.1.40418.2.6
Imported Objects
RFC1155-SMI Counter enterprises IpAddress
RFC1213-MIB DisplayString
SNMPv2-CONF NOTIFICATION-GROUP
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
Net-SNMP examples using the snr MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SNR-ERD-4' -M '/opt/observium/mibs/snr:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SNR-ERD-4::snr-erd-4'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SNR-ERD-4' -M '/opt/observium/mibs/snr:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SNR-ERD-4::snr-erd-4'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (51)
7 directly used by Observium
snr
.1.3.6.1.4.1.40418
snr-erd
.1.3.6.1.4.1.40418.2
snr-erd-4
.1.3.6.1.4.1.40418.2.6
traps
.1.3.6.1.4.1.40418.2.6.0
measurements
.1.3.6.1.4.1.40418.2.6.1
oneWire
.1.3.6.1.4.1.40418.2.6.1.1
adcSensor OBS ✓
Volt DCInteger32
 .1.3.6.1.4.1.40418.2.6.1.2
sp
.1.3.6.1.4.1.40418.2.6.1.30
sensorsTemplate
.1.3.6.1.4.1.40418.2.6.1.50
sensorsTemplateTotalConnected
Integer32
 .1.3.6.1.4.1.40418.2.6.1.50.2
temperatureDHT OBS ✓
degrees CentigradeInteger32
 .1.3.6.1.4.1.40418.2.6.1.8
humidityDHT OBS ✓
%Integer32
 .1.3.6.1.4.1.40418.2.6.1.9
options
.1.3.6.1.4.1.40418.2.6.10
dataType r/w
Enumeration
 .1.3.6.1.4.1.40418.2.6.10.1
crit
.1.3.6.1.4.1.40418.2.6.10.10
humCrit r/w
%Integer32
 .1.3.6.1.4.1.40418.2.6.10.10.20
adcCritMin r/w
Volt DCInteger32
 .1.3.6.1.4.1.40418.2.6.10.10.30
adcCritMax r/w
Volt DCInteger32
 .1.3.6.1.4.1.40418.2.6.10.10.31
adcHysteresis r/w
Integer32
 .1.3.6.1.4.1.40418.2.6.10.10.35
reboot r/w
Integer32
 .1.3.6.1.4.1.40418.2.6.10.300
diffparams
.1.3.6.1.4.1.40418.2.6.11
upsStatus
.1.3.6.1.4.1.40418.2.6.11.1
statusUPS OBS ✓
Enumeration
 .1.3.6.1.4.1.40418.2.6.11.1.1
shutdownStatusUPS
Integer32
 .1.3.6.1.4.1.40418.2.6.11.1.10
lastBatteryChangeUPS OBS ✓ r/w
OctetString
 .1.3.6.1.4.1.40418.2.6.11.1.20
shutdownTimeUPS r/w
Integer32
 .1.3.6.1.4.1.40418.2.6.11.1.51
turnOnTimeUPS r/w
minInteger32
 .1.3.6.1.4.1.40418.2.6.11.1.52
startShutdownTurnOnUPS r/w
Enumeration
 .1.3.6.1.4.1.40418.2.6.11.1.53
startTurnOnUPS r/w
Enumeration
 .1.3.6.1.4.1.40418.2.6.11.1.54
startLongTestUPS r/w
minInteger32
 .1.3.6.1.4.1.40418.2.6.11.1.71
beeperStatusUPS
Integer32
 .1.3.6.1.4.1.40418.2.6.11.1.8
pid
.1.3.6.1.4.1.40418.2.6.11.10
inputPID r/w
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.1
outputPercentPID
%Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.2
outputRealPID
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.3
ypPID
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.4
yiPID
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.5
ydPID
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.6
errorPID
Integer32
 .1.3.6.1.4.1.40418.2.6.11.10.7
dio
.1.3.6.1.4.1.40418.2.6.2
uSenseState
Enumeration
 .1.3.6.1.4.1.40418.2.6.2.3
serial
.1.3.6.1.4.1.40418.2.6.4
rs485
.1.3.6.1.4.1.40418.2.6.4.1
ipAddrRS485
.1.3.6.1.4.1.40418.2.6.4.1.2
rs232
.1.3.6.1.4.1.40418.2.6.4.2
ipAddrRS232
.1.3.6.1.4.1.40418.2.6.4.2.2
modules
.1.3.6.1.4.1.40418.2.6.5
gsm
.1.3.6.1.4.1.40418.2.6.5.1
gsmReconnCount OBS ✓
Integer32
 .1.3.6.1.4.1.40418.2.6.5.1.10
gsmStrength OBS ✓
dBmInteger32
 .1.3.6.1.4.1.40418.2.6.5.1.2
rf
.1.3.6.1.4.1.40418.2.6.5.2
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. SNMPv2-SMIrfc
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. RFC-1212rfc
  6. RFC1213-MIBrfc
  7. SNMPv2-CONFrfc
  8. SNR-ERD-4snrselected
Type Definitions (1)
SensorID
Unsigned32 range: 0..4294967295
Conformance Groups (1)
erd4Group
DI1Alarm DI1Release DI2Alarm DI2Release DI3Alarm DI3Release DI4Alarm DI4Release DI5Alarm DI5Release uSenseAlarm uSenseRelease reloutOn reloutOff DO1On DO1Off DO2On DO2Off DO3On DO3Off DO4On DO4Off DO5On DO5Off tempSensorAlarm tempSensorRelease adcSensorAlarm adcSensorRelease humSensorAlarm humSensorRelease task1Done task2Done task3Done task4Done pingLost batteryChargeLow upsUtilityFail upsUtilityOk
Notifications
 .1.3.6.1.4.1.40418.2.6.99
Notifications / Traps (18)
NameOIDDescription
uSenseAlarm
.1.3.6.1.4.1.40418.2.6.0.11
Signifies that Phase sensor Alarm fires
uSenseRelease
.1.3.6.1.4.1.40418.2.6.0.12
Signifies that Phase sensor Alarm released
reloutOn
.1.3.6.1.4.1.40418.2.6.0.13
Signifies that Rele was swithed on by Thermostat or Gigrostat mode
reloutOff
.1.3.6.1.4.1.40418.2.6.0.14
Signifies that Rele was swithed off by Thermostat or Gigrostat mode
tempSensorAlarm
.1.3.6.1.4.1.40418.2.6.0.29
Temperature alarm
tempSensorRelease
.1.3.6.1.4.1.40418.2.6.0.30
Temperature release
adcSensorAlarm
.1.3.6.1.4.1.40418.2.6.0.31
Voltage sensor alarm
adcSensorRelease
.1.3.6.1.4.1.40418.2.6.0.32
Voltage sensor release
humSensorAlarm
.1.3.6.1.4.1.40418.2.6.0.33
Humidity alarm
humSensorRelease
.1.3.6.1.4.1.40418.2.6.0.34
Humidity release
task1Done
.1.3.6.1.4.1.40418.2.6.0.36
Task 1 done
task2Done
.1.3.6.1.4.1.40418.2.6.0.37
Task 2 done
task3Done
.1.3.6.1.4.1.40418.2.6.0.38
Task 3 done
task4Done
.1.3.6.1.4.1.40418.2.6.0.39
Task 4 done
pingLost
.1.3.6.1.4.1.40418.2.6.0.45
Ping lost
batteryChargeLow
.1.3.6.1.4.1.40418.2.6.0.47
Battery charge is low
upsUtilityFail
.1.3.6.1.4.1.40418.2.6.0.50
UPS utility fail
upsUtilityOk
.1.3.6.1.4.1.40418.2.6.0.51
UPS utility OK