SMON-MIB
Monitored by Observium The MIB module for managing remote monitoring device
implementations for Switched Networks
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Ports
Explore Observium network monitoring
- Source file
SMON-MIB- Last revised
- Identity
switchRMON- Base OID
1.3.6.1.2.1.16.22
Imported Objects
| IF-MIB | InterfaceIndex |
| RMON-MIB | OwnerString rmon |
| RMON2-MIB | DataSource LastCreateTime probeConfig rmonConformance |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SMON-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SMON-MIB::switchRMON'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SMON-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SMON-MIB::switchRMON'
Objects (62)
1 directly used by Observium
Showing 62 of 62 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
|
Bits
|
.1.3.6.1.2.1.16.19.15 |
|
.1.3.6.1.2.1.16.20.3 |
||
.1.3.6.1.2.1.16.20.4 |
||
.1.3.6.1.2.1.16.22 |
||
.1.3.6.1.2.1.16.22.1 |
||
.1.3.6.1.2.1.16.22.1.1 |
||
.1.3.6.1.2.1.16.22.1.1.1 |
||
.1.3.6.1.2.1.16.22.1.1.1.1 |
||
.1.3.6.1.2.1.16.22.1.1.1.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.16.22.1.1.1.1.2 |
|
|
Bits
|
.1.3.6.1.2.1.16.22.1.1.1.1.3 |
|
.1.3.6.1.2.1.16.22.1.1.1.1.4 |
||
.1.3.6.1.2.1.16.22.1.2 |
||
.1.3.6.1.2.1.16.22.1.2.1 |
||
.1.3.6.1.2.1.16.22.1.2.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.16.22.1.2.1.1.1 |
|
.1.3.6.1.2.1.16.22.1.2.1.1.2 |
||
.1.3.6.1.2.1.16.22.1.2.1.1.3 |
||
.1.3.6.1.2.1.16.22.1.2.1.1.4 |
||
.1.3.6.1.2.1.16.22.1.2.1.1.5 |
||
.1.3.6.1.2.1.16.22.1.2.2 |
||
.1.3.6.1.2.1.16.22.1.2.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.16.22.1.2.2.1.1 |
|
|
packetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.2.1.10 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.11 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.12 |
|
|
octetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.2.1.13 |
|
.1.3.6.1.2.1.16.22.1.2.2.1.14 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.2 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.3 |
|
|
packetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.2.1.4 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.5 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.6 |
|
|
octetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.2.1.7 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.8 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.2.1.9 |
|
.1.3.6.1.2.1.16.22.1.2.3 |
||
.1.3.6.1.2.1.16.22.1.2.3.1 |
||
|
Integer32
|
.1.3.6.1.2.1.16.22.1.2.3.1.1 |
|
.1.3.6.1.2.1.16.22.1.2.3.1.2 |
||
.1.3.6.1.2.1.16.22.1.2.3.1.3 |
||
.1.3.6.1.2.1.16.22.1.2.3.1.4 |
||
.1.3.6.1.2.1.16.22.1.2.3.1.5 |
||
.1.3.6.1.2.1.16.22.1.2.4 |
||
.1.3.6.1.2.1.16.22.1.2.4.1 |
||
|
Integer32
|
.1.3.6.1.2.1.16.22.1.2.4.1.1 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.4.1.2 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.4.1.3 |
|
|
packetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.4.1.4 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.4.1.5 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.2.4.1.6 |
|
|
octetsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.16.22.1.2.4.1.7 |
|
.1.3.6.1.2.1.16.22.1.3 |
||
.1.3.6.1.2.1.16.22.1.3.1 |
||
.1.3.6.1.2.1.16.22.1.3.1.1 |
||
.1.3.6.1.2.1.16.22.1.3.1.1.1 |
||
.1.3.6.1.2.1.16.22.1.3.1.1.2 |
||
|
eventsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.16.22.1.3.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.16.22.1.3.1.1.4 |
|
|
|
.1.3.6.1.2.1.16.22.1.3.1.1.5 |
|
.1.3.6.1.2.1.16.22.1.4 |
||
.1.3.6.1.2.1.16.22.1.4.1 |
Dependencies (13) 6 direct · 7 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SMON-MIBrfcselected
Type Definitions (1)
| ObjectIdentifier |
Conformance Groups (12)
|
Defines the objects that describe the capabilities of RMON
data sources. |
.1.3.6.1.2.1.16.20.4.1
|
|
|
smonVlanStatsControlDataSource smonVlanStatsControlCreateTime smonVlanStatsControlOwner smonVlanStatsControlStatus smonVlanIdStatsTotalPkts smonVlanIdStatsTotalOctets smonVlanIdStatsNUcastPkts smonVlanIdStatsCreateTime
Defines the switch monitoring specific statistics - per VLAN
Id on interfaces of 10MB or less. |
.1.3.6.1.2.1.16.20.4.2
|
|
|
smonPrioStatsControlDataSource smonPrioStatsControlCreateTime smonPrioStatsControlOwner smonPrioStatsControlStatus smonPrioStatsPkts smonPrioStatsOctets
Defines the switch monitoring specific statistics - per VLAN
Id on interface. |
.1.3.6.1.2.1.16.20.4.3
|
|
|
smonVlanIdStatsTotalOverflowOctets smonVlanIdStatsTotalHCOctets smonPrioStatsOverflowOctets smonPrioStatsHCOctets
Defines the additional high capacity statistics needed to be
kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec. |
.1.3.6.1.2.1.16.20.4.4
|
|
|
smonVlanIdStatsTotalOverflowPkts smonVlanIdStatsTotalHCPkts smonVlanIdStatsTotalOverflowOctets smonVlanIdStatsTotalHCOctets smonVlanIdStatsNUcastOverflowPkts smonVlanIdStatsNUcastHCPkts smonPrioStatsOverflowPkts smonPrioStatsHCPkts smonPrioStatsOverflowOctets smonPrioStatsHCOctets
Defines the additional high capacity statistics needed to be
kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry. |
.1.3.6.1.2.1.16.20.4.5
|
|
|
Defines the additional high capacity VLAN statistics
needed to be kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec. |
.1.3.6.1.2.1.16.20.4.6
|
|
|
smonVlanIdStatsTotalOverflowPkts smonVlanIdStatsTotalHCPkts smonVlanIdStatsTotalOverflowOctets smonVlanIdStatsTotalHCOctets smonVlanIdStatsNUcastOverflowPkts smonVlanIdStatsNUcastHCPkts
Defines the additional high capacity VLAN statistics
needed to be kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry. |
.1.3.6.1.2.1.16.20.4.7
|
|
|
Defines the additional high capacity VLAN priority
statistics needed to be kept on interfaces with ifSpeed of greater than 10MB/sec and less than or equal to 100MB/sec. |
.1.3.6.1.2.1.16.20.4.8
|
|
|
Defines the additional high capacity VLAN priority
statistics needed to be kept on interfaces with ifSpeed of greater than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry. |
.1.3.6.1.2.1.16.20.4.9
|
|
|
Defines the switch monitoring specific statistics for systems
capable of counting non-unicast octets for a given dataSource (as described in the dataSourceRmonCaps object). |
.1.3.6.1.2.1.16.20.4.10
|
|
|
An indication of the SMON capabilities supported by this
agent. |
.1.3.6.1.2.1.16.20.4.11
|
|
|
Defines the control objects for copy port operations.
|
.1.3.6.1.2.1.16.20.4.12
|
Compliance Statements (4)
OID
.1.3.6.1.2.1.16.20.3.1Describes the requirements for full conformance with the SMON
MIB
MIB
Required groups
| mandatory | dataSourceCapsGroup | |
| mandatory | smonVlanStatsGroup | |
| mandatory | smonPrioStatsGroup | |
| mandatory | portCopyConfigGroup | |
| mandatory | smonInformationGroup | |
| optional | smonHcTo100mbGroup |
This group of VLAN statistics counter are mandatory only for those network interfaces for which the corresponding ifSpeed can be greater than 10MB/sec and less than or equal to 100MB/sec. |
| optional | smonHc100mbPlusGroup |
This group of VLAN statistics counters are mandatory only for those network interfaces for which the corresponding ifSpeed can be more than 100MB/sec. This group of VLAN statistics is also mandatory for smonDataSources of type VLAN or entPhysicalEntry. |
OID
.1.3.6.1.2.1.16.20.3.2Describes the requirements for conformance with the SMON MIB
with support for VLAN Statistics. Mandatory for a SMON probe
in environment where IEEE 802.1Q bridging is implemented.
with support for VLAN Statistics. Mandatory for a SMON probe
in environment where IEEE 802.1Q bridging is implemented.
Required groups
| mandatory | dataSourceCapsGroup | |
| mandatory | smonVlanStatsGroup | |
| mandatory | smonInformationGroup | |
| optional | hcVlanTo100mbGroup |
This group of VLAN statistics counter are mandatory only for those network interfaces for which the corresponding ifSpeed can be up to and including 100MB/sec. |
| optional | hcVlan100mbPlusGroup |
This group of VLAN statistics counters are mandatory only for those network interfaces for which the corresponding ifSpeed is greater than 100MB/sec. This group of VLAN statistics is also mandatory for smonDataSources of type VLAN or entPhysicalEntry. |
OID
.1.3.6.1.2.1.16.20.3.3Describes the requirements for conformance with the SMON MIB
with support for priority level Statistics. Mandatory for a
SMON probe in a environment where IEEE 802.1p
priority-switching is implemented.
with support for priority level Statistics. Mandatory for a
SMON probe in a environment where IEEE 802.1p
priority-switching is implemented.
Required groups
| mandatory | dataSourceCapsGroup | |
| mandatory | smonPrioStatsGroup | |
| mandatory | smonInformationGroup | |
| optional | hcPrioTo100mbGroup |
This group of VLAN priority statistics counters are mandatory only for those network interfaces for which the corresponding ifSpeed can be up to and including 100MB/sec. |
| optional | hcPrio100mbPlusGroup |
This group is mandatory only for those network interfaces for which the corresponding ifSpeed is greater than 100MB/sec. This group of VLAN priority statistics is also mandatory for smonDataSources of type VLAN or entPhysicalEntry |
OID
.1.3.6.1.2.1.16.20.3.4Describes the requirements for conformance with the port copy
functionality defined by the SMON MIB
functionality defined by the SMON MIB
Required groups
| mandatory | dataSourceCapsGroup | |
| mandatory | portCopyConfigGroup | |
| mandatory | smonInformationGroup |