SMC6152L2-MIB Table View

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry row .1.3.6.1.4.1.202.20.66.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column	Syntax	OID
swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.1.3.1.1
swHardwareVer Hardware version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.2
swMicrocodeVer Microcode version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.3
swLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.4
swBootRomVer Boot ROM code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.5
swOpCodeVer Operation code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.6
swPortNumber The number of ports on this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.1.3.1.7
swPowerStatus Indicates the switch using internalPower(1), redundantPower(2) or both(3)	Enumeration Enumerated Values: 1 internalPower 2 redundantPower 3 internalAndRedundantPower	.1.3.6.1.4.1.202.20.66.1.1.3.1.8
swRoleInSystem Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.	Enumeration Enumerated Values: 1 master 2 backupMaster 3 slave	.1.3.6.1.4.1.202.20.66.1.1.3.1.9
swSerialNumber Serial number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.202.20.66.1.1.3.1.10
swServiceTag Service tag serial-number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.202.20.66.1.1.3.1.13
swModelNumber Model number of the switch.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.202.20.66.1.1.3.1.14
swEpldVer The EPLD version of the switch.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.202.20.66.1.1.3.1.15

Table about the status of individual powers.

switchIndivPowerEntry row .1.3.6.1.4.1.202.20.66.1.1.6.1

Table about the status of individual power.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column	Syntax	OID
swIndivPowerUnitIndex This is defined as swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.1.6.1.1
swIndivPowerIndex 1 means internal power, 2 means external power.	Enumeration Enumerated Values: 1 internalPower 2 externalPower	.1.3.6.1.4.1.202.20.66.1.1.6.1.2
swIndivPowerStatus notPresent(1) means not present, green(2) means up, red(3) means down.	Enumeration Enumerated Values: 1 notPresent 2 green 3 red	.1.3.6.1.4.1.202.20.66.1.1.6.1.3

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry row .1.3.6.1.4.1.202.20.66.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column	Syntax	OID
portIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.2.1.1.1
portName The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.202.20.66.1.2.1.1.2
portType Indicates the port type of the configuration of the switch.	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp 9 hundredBaseFxScSingleMode 10 hundredBaseFxScMultiMode 11 thousandBaseCX 12 tenG	.1.3.6.1.4.1.202.20.66.1.2.1.1.3
portSpeedDpxCfg Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half…	Enumerationr/w Enumerated Values: 1 reserved 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 halfDuplex10g 9 fullDuplex10g	.1.3.6.1.4.1.202.20.66.1.2.1.1.4
portFlowCtrlCfg (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 5 tx 6 rx	.1.3.6.1.4.1.202.20.66.1.2.1.1.5
portCapabilities Port or trunk capabilities.	Bitsr/w Enumerated Values: 0 portCap10half 1 portCap10full 2 portCap100half 3 portCap100full 4 portCap1000half 5 portCap1000full 6 portCap10gHalf 7 portCap10gFull 8 reserved8 9 reserved9 10 reserved10 11 reserved11 12 reserved12 13 reserved13 14 portCapSym 15 portCapFlowCtrl	.1.3.6.1.4.1.202.20.66.1.2.1.1.6
portAutonegotiation Whether auto-negotiation is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.2.1.1.7
portSpeedDpxStatus The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t…	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000 8 halfDuplex10g 9 fullDuplex10g	.1.3.6.1.4.1.202.20.66.1.2.1.1.8
portFlowCtrlStatus (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently confi…	Enumeration Enumerated Values: 1 error 2 backPressure 3 dot3xFlowControl 4 none	.1.3.6.1.4.1.202.20.66.1.2.1.1.9
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding tru…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.2.1.1.10
portComboForcedMode This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal…	Enumerationr/w Enumerated Values: 1 none 2 copperForced 3 copperPreferredAuto 4 sfpForced 5 sfpPreferredAuto	.1.3.6.1.4.1.202.20.66.1.2.1.1.12

Table describing the configuration and status of each
trunk.

trunkEntry row .1.3.6.1.4.1.202.20.66.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column	Syntax	OID
trunkIndex Identifies the trunk within the switch that is described by the table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.3.3.1.1
trunkPorts The complete set of ports currently associated with this trunk.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.202.20.66.1.3.3.1.2
trunkCreation A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.202.20.66.1.3.3.1.3
trunkStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.3.3.1.4

Table for LACP port configuration.

lacpPortEntry row .1.3.6.1.4.1.202.20.66.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.4.1.1.1
lacpPortStatus Whether 802.3ad LACP is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.4.1.1.2

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry row .1.3.6.1.4.1.202.20.66.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
staPortFastForward Whether fast forwarding is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.5.2.1.2
staPortProtocolMigration When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.202.20.66.1.5.2.1.3
staPortAdminEdgePort The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.202.20.66.1.5.2.1.4
staPortOperEdgePort The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.202.20.66.1.5.2.1.5
staPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.202.20.66.1.5.2.1.6
staPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.202.20.66.1.5.2.1.7
staPortSystemStatus Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.5.2.1.9
staPortLongAdminPathCost The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This obje…	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.202.20.66.1.5.2.1.10
staPortLongOperPathCost The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This objec…	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.202.20.66.1.5.2.1.11

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry row .1.3.6.1.4.1.202.20.66.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column	Syntax	OID
mirrorDestinationPort The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.8.1.1.1
mirrorSourcePort The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.8.1.1.2
mirrorType If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored.	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 both	.1.3.6.1.4.1.202.20.66.1.8.1.1.3
mirrorStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.8.1.1.4

Table for current router ports.

igmpSnoopRouterCurrentEntry row .1.3.6.1.4.1.202.20.66.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.8.1.1
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.202.20.66.1.9.8.1.2
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.202.20.66.1.9.8.1.3

Table for static router ports.

igmpSnoopRouterStaticEntry row .1.3.6.1.4.1.202.20.66.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column	Syntax	OID
igmpSnoopRouterStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.9.1.1
igmpSnoopRouterStaticPorts The set of ports which are static router ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.202.20.66.1.9.9.1.2
igmpSnoopRouterStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.9.9.1.3

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry row .1.3.6.1.4.1.202.20.66.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.10.1.1
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.9.10.1.2
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.202.20.66.1.9.10.1.3
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.202.20.66.1.9.10.1.4

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry row .1.3.6.1.4.1.202.20.66.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column	Syntax	OID
igmpSnoopMulticastStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.11.1.1
igmpSnoopMulticastStaticIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.9.11.1.2
igmpSnoopMulticastStaticPorts The set of ports which are members.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.202.20.66.1.9.11.1.3
igmpSnoopMulticastStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.9.11.1.4

Table for enabling or disabling IGMP snooping per VLAN.

igmpSnoopCurrentVlanEntry row .1.3.6.1.4.1.202.20.66.1.9.14.1

Entry for enabling or disabling IGMP snooping.

Indexes

igmpSnoopCurrentVlanIndex

Column	Syntax	OID
igmpSnoopCurrentVlanIndex Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.14.1.1
igmpSnoopCurrentVlanImmediateLeave The parameter to enable or disable the Immediate-Leave feature on this VLAN.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.9.14.1.3

The table for configuring the IGMP snooping profile.

igmpSnoopProfileEntry row .1.3.6.1.4.1.202.20.66.1.9.18.1

The entry for configuring the IGMP snooping profile.

Indexes

igmpSnoopProfileId

Column	Syntax	OID
igmpSnoopProfileId The ID of the IGMP snooping profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.18.1.1
igmpSnoopProfileAction The access mode of the IGMP snooping profile.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.202.20.66.1.9.18.1.2
igmpSnoopProfileStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.9.18.1.3

The table for configuring the range of the IGMP snooping profile.

igmpSnoopProfileRangeEntry row .1.3.6.1.4.1.202.20.66.1.9.20.1

The entry for configuring the range of the IGMP snooping profile.

Indexes

igmpSnoopProfileRangeProfileId igmpSnoopProfileRangeInetAddressType igmpSnoopProfileRangeStartInetAddress

Column	Syntax	OID
igmpSnoopProfileRangeProfileId This is defined as igmpSnoopProfileId.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.20.1.1
igmpSnoopProfileRangeInetAddressType The address type is associated with this agent. Only ipv4(1) type is supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.202.20.66.1.9.20.1.2
igmpSnoopProfileRangeStartInetAddress The specified addresses in the start of the controlled IP multicast addresses.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.202.20.66.1.9.20.1.3
igmpSnoopProfileRangeEndInetAddress The specified addresses in the end of the controlled IP multicast addresses.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.202.20.66.1.9.20.1.4
igmpSnoopProfileRangeAction The access mode of the IGMP snooping profile.	Enumeration Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.202.20.66.1.9.20.1.5

Table for port configuration in IGMP filtering.

igmpSnoopFilterPortEntry row .1.3.6.1.4.1.202.20.66.1.9.21.1

Entry for port configuration in IGMP filtering.

Indexes

igmpSnoopFilterPortIndex

Column	Syntax	OID
igmpSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.21.1.1
igmpSnoopFilterPortProfileId The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.9.21.1.2

Table for port configuration in IGMP throttling.

igmpSnoopThrottlePortEntry row .1.3.6.1.4.1.202.20.66.1.9.22.1

Entry for port configuration in IGMP throttling.

Indexes

igmpSnoopThrottlePortIndex

Column	Syntax	OID
igmpSnoopThrottlePortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.9.22.1.1
igmpSnoopThrottlePortRunningStatus Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.202.20.66.1.9.22.1.2
igmpSnoopThrottlePortAction The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to t…	Enumerationr/w Enumerated Values: 1 replace 2 deny	.1.3.6.1.4.1.202.20.66.1.9.22.1.3
igmpSnoopThrottlePortMaxGroups The maximum number of IGMP groups that the interface can join.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.202.20.66.1.9.22.1.4
igmpSnoopThrottlePortCurrentGroups The current number of IGMP groups that the interface has joined.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.9.22.1.5

A table of netConfigEntry.

netConfigEntry row .1.3.6.1.4.1.202.20.66.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column	Syntax	OID
netConfigIfIndex The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.10.1.1.1
netConfigIPAddress The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.10.1.1.2
netConfigSubnetMask The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.10.1.1.3
netConfigPrimaryInterface Whether this is a primary interface.	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.202.20.66.1.10.1.1.4
netConfigUnnumbered Whether this is an unnumbered interface.	Enumeration Enumerated Values: 1 unnumbered 2 notUnnumbered	.1.3.6.1.4.1.202.20.66.1.10.1.1.5
netConfigStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.10.1.1.6

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs).

dhcpcInterfaceEntry row .1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1

Entry for DHCP client information listed by interface.

Indexes

dhcpcIfIndex

Column	Syntax	OID
dhcpcIfIndex This is defined by ifIndex in the IF-MIB.(static vlan if index)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.1
dhcpcIfClientIdMode Whether the Client ID is in text mode or in Hex mode.	Enumerationr/w Enumerated Values: 1 notSpecify 2 text 3 hex	.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.2
dhcpcIfClientId The value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identify the client.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.3

Table to manage the control of broadcast storms for ports.

bcastStormEntry row .1.3.6.1.4.1.202.20.66.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column	Syntax	OID
bcastStormIfIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.11.1.1.1
bcastStormStatus Whether broadcast storm protection is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.11.1.1.2
bcastStormOctetRateInKilo Broadcast storm threshold in kilobits per second. If this entry is for a trunk, this is the value for each member port. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.11.1.1.7

Table for VLAN configuration.

vlanEntry row .1.3.6.1.4.1.202.20.66.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column	Syntax	OID
vlanIndex Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.202.20.66.1.12.1.1.1
vlanAddressMethod Method to get the IP address.	Enumerationr/w Enumerated Values: 1 user 2 bootp 3 dhcp	.1.3.6.1.4.1.202.20.66.1.12.1.1.2

Table for port configuration in VLAN.

vlanPortEntry row .1.3.6.1.4.1.202.20.66.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column	Syntax	OID
vlanPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDG…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.12.2.1.1
vlanPortMode This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.	Enumerationr/w Enumerated Values: 1 hybrid 2 dot1qTrunk 3 access	.1.3.6.1.4.1.202.20.66.1.12.2.1.2
vlanPortPrivateVlanType The port type defined for private VLAN.	Enumerationr/w Enumerated Values: 1 normal 2 isolated 3 community 4 promiscous	.1.3.6.1.4.1.202.20.66.1.12.2.1.3

The configuration table which contains the binding entry 
of the protocol-group and VLANs.

protocolVlanEntry row .1.3.6.1.4.1.202.20.66.1.12.5.1

The binding entry of the protocol-group and VLANs.

Indexes

protocolVlanGroupId

Column	Syntax	OID
protocolVlanGroupId The specified protocol group of a binding entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.12.5.1.1
protocolVlanGroupVid The vlan index of the binding entry. The vid zero is used to delete the binding entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.12.5.1.2

Table for IP DSCP priority mapping.

prioIpDscpEntry row .1.3.6.1.4.1.202.20.66.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.13.4.1.1
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.202.20.66.1.13.4.1.2
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.202.20.66.1.13.4.1.3

Table for weighted round robin (WRR).

prioWrrEntry row .1.3.6.1.4.1.202.20.66.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.202.20.66.1.13.9.1.1
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.202.20.66.1.13.9.1.2

A list of trap destination entries.

trapDestEntry row .1.3.6.1.4.1.202.20.66.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column	Syntax	OID
trapDestAddress The address to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.14.1.1.1
trapDestCommunity A community to which this destination address belongs.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.202.20.66.1.14.1.1.2
trapDestStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.14.1.1.3
trapDestVersion Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent.	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.202.20.66.1.14.1.1.4
trapDestUdpPort Determines the UDP port number that the trap will be sent to.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.202.20.66.1.14.1.1.5

Table for rate limit of each port.

rateLimitPortEntry row .1.3.6.1.4.1.202.20.66.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column	Syntax	OID
rlPortIndex The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.1.2.1.1
rlPortInputStatus Whether input rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.16.1.2.1.6
rlPortOutputStatus Whether output rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.16.1.2.1.7
rlPortInputLimitInKilo Value of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.1.2.1.10
rlPortOutputLimitInKilo Value of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.1.2.1.11

Table for differentiated services on each port.

diffServPortEntry row .1.3.6.1.4.1.202.20.66.1.16.4.9.1

Entry for differentiated services on each port.

Indexes

diffServPortIfIndex

Column	Syntax	OID
diffServPortIfIndex This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.9.1.1
diffServPortPolicyMapIndex Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapInd…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.9.1.2
diffServPortIngressIpAclIndex Specifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.9.1.3
diffServPortIngressMacAclIndex Specifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.9.1.4

Table for policy map.

diffServPolicyMapEntry row .1.3.6.1.4.1.202.20.66.1.16.4.10.1

Entry for policy map.

Indexes

diffServPolicyMapIndex

Column	Syntax	OID
diffServPolicyMapIndex An index that uniquely identifies an entry in this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.10.1.1
diffServPolicyMapName The name of this entry.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.202.20.66.1.16.4.10.1.2
diffServPolicyMapDescription The description of this entry.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.202.20.66.1.16.4.10.1.3
diffServPolicyMapElementIndexList The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.202.20.66.1.16.4.10.1.4
diffServPolicyMapStatus This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'active', which indi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.10.1.5

Table for policy map element.

diffServPolicyMapElementEntry row .1.3.6.1.4.1.202.20.66.1.16.4.12.1

Entry for policy map element.

Indexes

diffServPolicyMapElementIndex

Column	Syntax	OID
diffServPolicyMapElementIndex An index that uniquely identifies an entry in this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.12.1.1
diffServPolicyMapElementClassMapIndex Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.202.20.66.1.16.4.12.1.2
diffServPolicyMapElementMeterIndex Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.12.1.3
diffServPolicyMapElementActionIndex Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.202.20.66.1.16.4.12.1.4
diffServPolicyMapElementStatus This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'acti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.12.1.5

Table for class map.

diffServClassMapEntry row .1.3.6.1.4.1.202.20.66.1.16.4.13.1

Entry for class map.

Indexes

diffServClassMapIndex

Column	Syntax	OID
diffServClassMapIndex An index that uniquely identifies an entry in this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.1
diffServClassMapName The name of this entry.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.2
diffServClassMapDescription The description of this entry.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.3
diffServClassMapMatchType The map match type of this entry.	Enumerationr/w Enumerated Values: 1 matchAny 2 matchAll	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.4
diffServClassMapElementIndexTypeList The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServCla…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.5
diffServClassMapElementIndexList The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.6
diffServClassMapStatus This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active'…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.13.1.7

Table for ACL.

diffServAclEntry row .1.3.6.1.4.1.202.20.66.1.16.4.15.1

Entry for ACL.

Indexes

diffServAclIndex

Column	Syntax	OID
diffServAclIndex An index that uniquely identifies an entry in the ACL table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.15.1.1
diffServAclName The name of this entry.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.202.20.66.1.16.4.15.1.2
diffServAclType The type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry will be aoto- unbound from the diffServPortTable and the di…	Enumerationr/w Enumerated Values: 1 mac 2 ipstandard 3 ipextended	.1.3.6.1.4.1.202.20.66.1.16.4.15.1.3
diffServAclAceIndexList The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate th…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.202.20.66.1.16.4.15.1.4
diffServAclStatus This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicates that the conceptual row is availa…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.15.1.5

Table for IP ACE.

diffServIpAceEntry row .1.3.6.1.4.1.202.20.66.1.16.4.17.1

Entry for IP ACE.

Indexes

diffServIpAceIndex

Column	Syntax	OID
diffServIpAceIndex An index that uniquely identifies an entry in the IP ACE table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.1
diffServIpAceType The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0.	Enumerationr/w Enumerated Values: 1 standard 2 extended	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.2
diffServIpAceAccess Indicates the action to be taken if a packet matches this ACE.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.3
diffServIpAceSourceIpAddr The specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this object.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.4
diffServIpAceSourceIpAddrBitmask The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.5
diffServIpAceDestIpAddr The specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if th…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.6
diffServIpAceDestIpAddrBitmask The specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.7
diffServIpAceProtocol The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGM…	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.8
diffServIpAcePrec Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may not be modified if the associated diffServIpAceType object is …	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.9
diffServIpAceTos Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may not be modified if the associated diffServIpAceType object i…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.10
diffServIpAceDscp Specifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be modified if the associated diffServIpAceType object is equal to…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.11
diffServIpAceSourcePortOp Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the diffSe…	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.12
diffServIpAceMinSourcePort If the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.13
diffServIpAceSourcePortBitmask If the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.15
diffServIpAceDestPortOp Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is …	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.16
diffServIpAceMinDestPort If the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.17
diffServIpAceDestPortBitmask If the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.19
diffServIpAceControlCode Indicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not be modified if the associated diffServIpAceType object is e…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.20
diffServIpAceControlCodeBitmask Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not…	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.21
diffServIpAceStatus This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.17.1.22

Table for MAC ACE.

diffServMacAceEntry row .1.3.6.1.4.1.202.20.66.1.16.4.18.1

Entry for MAC ACE.

Indexes

diffServMacAceIndex

Column	Syntax	OID
diffServMacAceIndex An index that uniquely identifies an entry in the MAC ACE table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.1
diffServMacAceAccess Indicates the action to be taken if a packet matches this ACE.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.2
diffServMacAcePktformat Used to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 any 2 untagged-Eth2 3 untagged802Dot3 4 tagggedEth2 5 tagged802Dot3	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.3
diffServMacAceSourceMacAddr Indicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSourceMacAddrBitmask and then compared against the value of this…	r/w	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.4
diffServMacAceSourceMacAddrBitmask The specified source MAC address mask.	r/w	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.5
diffServMacAceDestMacAddr Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of diffServMacAceDestMacAddrBitmask and then compared against the …	r/w	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.6
diffServMacAceDestMacAddrBitmask The specified destination MAC address mask.	r/w	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.7
diffServMacAceVidOp Indicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1).	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.8
diffServMacAceMinVid Indicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3).	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.9
diffServMacAceVidBitmask The bitmask of the VID if the diffServMacAceVidOp is equal(2). Default value is 0xfff.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.10
diffServMacAceEtherTypeOp Indicates how a packet's ether type is to be compared.	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.12
diffServMacAceEtherTypeBitmask The bitmask of ether type if the diffServMacAceEtherTypeOp is equal(2). The default value is 'FFFF'h.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.13
diffServMacAceMinEtherType Indicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.14
diffServMacAceStatus This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.18.1.16

Table for action.

diffServActionEntry row .1.3.6.1.4.1.202.20.66.1.16.4.19.1

Entry for action.

Indexes

diffServActionIndex

Column	Syntax	OID
diffServActionIndex An index that uniquely identifies an entry in the action table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.1
diffServActionList The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDro…	Bitsr/w Enumerated Values: 0 actionPktNewPri 2 actionPktNewDscp 3 actionRedPktNewDscp 4 actionRedDrop	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.2
diffServActionPktNewPri Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.3
diffServActionPktNewDscp Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.5
diffServActionRedPktNewDscp Specifies the new DSCP value for the red marking packet when the action is satisfied. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, this object can not be set.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.6
diffServActionRedDrop The actionRedDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.7
diffServActionStatus This object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', whi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.19.1.8

Table for meter.

diffServMeterEntry row .1.3.6.1.4.1.202.20.66.1.16.4.20.1

Entry for meter.

Indexes

diffServActionIndex

Column	Syntax	OID
diffServMeterIndex An entry that describes a single set of token bucket parameters.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.1
diffServMeterModel The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown.	Enumerationr/w Enumerated Values: 1 default 2 flow 3 trTcmColorBlind 4 trTcmColorAware 5 srTcmColorBlind 6 srTcmColorAware	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.2
diffServMeterRate The token-bucket rate, in kilobits per second (kbps).	Integer32r/w Constraints: range: 1-1000000	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.3
diffServMeterBurstSize The maximum number of bytes in a single transmission burst.	Integer32r/w Constraints: range: 64-524288	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.4
diffServMeterInterval The time interval used with the token bucket.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.5
diffServMeterStatus This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.202.20.66.1.16.4.20.1.6

A table containing private VLAN information on the
VLANs which currently exist.

privateVlanVlanEntry row .1.3.6.1.4.1.202.20.66.1.17.1.4.1

A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain.

Indexes

privateVlanVlanIndex

Column	Syntax	OID
privateVlanVlanIndex The VLAN ID of this private VLAN.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.202.20.66.1.17.1.4.1.1
privateVlanVlanType The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private V…	Enumerationr/w Enumerated Values: 1 invalid 2 primary 3 isolated 4 community	.1.3.6.1.4.1.202.20.66.1.17.1.4.1.2
privateVlanAssoicatedPrimaryVlan The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has th…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.202.20.66.1.17.1.4.1.3

A table containing information on the configuration of
secondary VLANs on the device ports.

privateVlanPrivatePortEntry row .1.3.6.1.4.1.202.20.66.1.17.1.5.1

A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…

Indexes

privateVlanPrivatePortIfIndex

Column	Syntax	OID
privateVlanPrivatePortIfIndex This is defined as the ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.1.5.1.1
privateVlanPrivatePortSecondaryVlan The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egre…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.202.20.66.1.17.1.5.1.2

A table containing secondary VLAN to primary VLAN remapping
information on ports of the device.

privateVlanPromPortEntry row .1.3.6.1.4.1.202.20.66.1.17.1.6.1

A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…

Indexes

privateVlanPromPortIfIndex

Column	Syntax	OID
privateVlanPromPortIfIndex This is defined as ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.1
privateVlanPromPortPrimaryVlanId The primary VLAN ID of the promiscous port.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.2
privateVlanPromPortSecondaryRemap A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The mos…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.3
privateVlanPromPortSecondaryRemap2k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 t…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.4
privateVlanPromPortSecondaryRemap3k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 t…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.5
privateVlanPromPortSecondaryRemap4k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 t…	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.202.20.66.1.17.1.6.1.6

The port security(MAC binding) Table.

portSecPortEntry row .1.3.6.1.4.1.202.20.66.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column	Syntax	OID
portSecPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.2.1.1.1
portSecPortStatus Set enabled(1) to enable port security and set disabled(2) to disable port security.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.202.20.66.1.17.2.1.1.2
portSecAction The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be s…	Enumerationr/w Enumerated Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.202.20.66.1.17.2.1.1.3
portSecMaxMacCount The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the num…	Integer32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.202.20.66.1.17.2.1.1.4

The table for multiple RADIUS server.

radiusMultipleServerEntry row .1.3.6.1.4.1.202.20.66.1.17.4.7.1

The conceptual row for radiusMultipleServerTable.

Indexes

radiusMultipleServerIndex

Column	Syntax	OID
radiusMultipleServerIndex The RADIUS multiple server index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.1
radiusMultipleServerAddress IP address of a multiple RADIUS server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.2
radiusMultipleServerPortNumber IP port number of a multiple RADIUS server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.3
radiusMultipleServerKey Key for RADIUS. This variable can only be set. When this variable is read, it always returns a zero-length string.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.4
radiusMultipleServerRetransmit Maximum number of retransmissions for RADIUS.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.5
radiusMultipleServerTimeout Timeout for RADIUS.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.6
radiusMultipleServerStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.202.20.66.1.17.4.7.1.8

The table for Secure Shell Connection.

sshConnInfoEntry row .1.3.6.1.4.1.202.20.66.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.1
sshConnMajorVersion The SSH major version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.2
sshConnMinorVersion The SSH minor version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.3
sshConnStatus The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta…	Enumeration Enumerated Values: 1 negotiationStart 2 authenticationStart 3 sessionStart	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.5
sshConnUserName The user name of the connection.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.6
sshDisconnect Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable.	Enumerationr/w Enumerated Values: 1 noDisconnect 2 disconnect	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.7
sshConnEncryptionTypeStr The encryption type of the SSH.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.202.20.66.1.17.6.6.1.8

The conceptual table of all of sshUserEntry.

sshUserEntry row .1.3.6.1.4.1.202.20.66.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column	Syntax	OID
sshUserName User Name.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.1
sshUserRsaKey1 The RSA user key segment 1.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.2
sshUserRsaKey2 The RSA user key segment 2.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.3
sshUserRsaKey3 The RSA user key segment 3.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.4
sshUserRsaKey4 The RSA user key segment 4.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.5
sshUserRsaKey5 The RSA user key segment 5.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.6
sshUserRsaKey6 The RSA user key segment 6.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.7
sshUserRsaKey7 The RSA user key segment 7.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.8
sshUserRsaKey8 The RSA user key segment 8.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.9
sshUserDsaKey1 The DSA user key segment 1.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.10
sshUserDsaKey2 The DSA user key segment 2.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.11
sshUserDsaKey3 The DSA user key segment 3.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.12
sshUserDsaKey4 The DSA user key segment 4.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.13
sshUserDsaKey5 The DSA user key segment 5.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.14
sshUserDsaKey6 The DSA user key segment 6.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.15
sshUserDsaKey7 The DSA user key segment 7.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.16
sshUserDsaKey8 The DSA user key segment 8.	KeySegment Type Constraints: range: 0..128	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.17
sshUserKeyDelAction To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. …	Enumerationr/w Enumerated Values: 1 noDel 2 delRsaKey 3 delDsaKey 4 delBothKeys	.1.3.6.1.4.1.202.20.66.1.17.6.29.1.18