SLE-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

sleTrafficProfileTable

table

.1.3.6.1.4.1.6296.101.10.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleTrafficProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::sleTrafficProfileTable'

Description.

sleTrafficProfileEntry row .1.3.6.1.4.1.6296.101.10.2.1.1

Description.

Indexes

sleTrafficProfileIndex

Column	Syntax	OID
sleTrafficProfileIndex meter Index	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.6296.101.10.2.1.1.1`
sleTrafficProfileMinBandwidth The value is in unit for 64 kbps	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6296.101.10.2.1.1.2`
sleTrafficProfileMaxBandwidth The value is in unit for 64 kbps	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6296.101.10.2.1.1.3`
sleTrafficProfileMaxBurstSize The size of the bucket used for metering	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6296.101.10.2.1.1.4`
sleTrafficProfileUseCount Description.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6296.101.10.2.1.1.5`

sleUserFlowTable

table

.1.3.6.1.4.1.6296.101.10.3.1 · 1 row entry · 47 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleUserFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::sleUserFlowTable'

Description.

sleUserFlowEntry row .1.3.6.1.4.1.6296.101.10.3.1.1

Description.

Indexes

sleUserFlowName

Column Syntax OID

sleUserFlowName

The name of this user flow.

OctetString

Constraints:
range: 1-63

.1.3.6.1.4.1.6296.101.10.3.1.1.1

sleUserFlowIngressPorts

Ingress port number

OctetString

.1.3.6.1.4.1.6296.101.10.3.1.1.2

sleUserFlowEgressPorts

Egress Port Number

OctetString

.1.3.6.1.4.1.6296.101.10.3.1.1.3

sleUserFlowEthernetType

The ethernet type value in incoming frames

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6296.101.10.3.1.1.4

sleUserFlowSrcMacAddr

Source MAC address

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.6296.101.10.3.1.1.5

sleUserFlowDstMacAddr

Destination MAC address

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.6296.101.10.3.1.1.6

sleUserFlowVlan

VLAN ID

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.6296.101.10.3.1.1.7

sleUserFlow8021p

The value of the IEEE802.1p priority in the packet

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6296.101.10.3.1.1.8

sleUserFlowSrcIpAddr

The IP address to match against the packet's
source IP address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.6296.101.10.3.1.1.9

sleUserFlowSrcPrefixLength

Subnet mask. The length of 0 indicates a match of any address

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.6296.101.10.3.1.1.10

sleUserFlowDstIpAddr

The IP address to match against the packet's
destination IP address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.6296.101.10.3.1.1.11

sleUserFlowDstPrefixLength

Subnet mask. The length of 0 indicates a match of any address

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.6296.101.10.3.1.1.12

sleUserFlowIpPktPriorityType

Description.

Enumeration

Enumerated Values:

1	ipPrecedence
2	diffServ
3	ipToS

.1.3.6.1.4.1.6296.101.10.3.1.1.13

sleUserFlowIpPktPriority

The Priority value in incoming IP packet.
If sleUserFlowIpPktPriorityType is 1,
this value's range is 0-7.
If sleUserFlowIpPktPriorityType is 2,
this value's range is 0-63.
If sleUserFlowIpPktPriorityType is 3,
this …

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6296.101.10.3.1.1.14

sleUserFlowProtocolType

The IP protocol type value

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6296.101.10.3.1.1.15

sleUserFlowTcpFlag

TCP Flags

Bits

Enumerated Values:

0	reserv0
1	reserv1
2	urg
3	ack
4	psh
5	rst
6	syn
7	fin

.1.3.6.1.4.1.6296.101.10.3.1.1.16

sleUserFlowSrcL4Port

The source L4 port number, only valid for
TCP or UDP packets.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6296.101.10.3.1.1.17

sleUserFlowDstL4Port

The destination L4 port number, only valid for
TCP or UDP packets.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6296.101.10.3.1.1.18

sleUserFlowPktLen

The packet length of the incoming packet

Integer32

Constraints:
range: 21-65535

.1.3.6.1.4.1.6296.101.10.3.1.1.19

sleUserFlowValidFlags

User Flow Valid Flags

Bits

Enumerated Values:

0	ufIngressPort
1	ufEgressPort
2	ufEthernetType
3	ufSrcMacAddress
4	ufDstMacAddress
5	ufVlanId
6	uf8021p
7	ufSrcIpAddress
8	ufSrcPrefixLength
9	ufDstIpAddress
10	ufDstPrefixLength
11	ufIpPktPriority
12	ufProtocolType
13	ufTcpFlag
14	ufSrcL4Port
15	ufDstL4Port
16	ufPacketLength
17	ufPriority
18	ufInnerVlanId
19	ufInner8021p

.1.3.6.1.4.1.6296.101.10.3.1.1.20

sleUserFlowMatchFlags

User Flow Matching Flags

Bits

Enumerated Values:

0	ufIngressPort
1	ufEgressPort
2	ufEthernetType
3	ufSrcMacAddress
4	ufDstMacAddress
5	ufVlanId
6	uf8021p
7	ufSrcIpAddress
8	ufSrcPrefixLength
9	ufDstIpAddress
10	ufDstPrefixLength
11	ufIpPktPriority
12	ufProtocolType
13	ufTcpFlag
14	ufSrcL4Port
15	ufDstL4Port
16	ufPacketLength
17	ufPriority

.1.3.6.1.4.1.6296.101.10.3.1.1.21

sleUserFlowPriority

The priority of this user flow

Enumeration

Enumerated Values:

1	low
2	medium
3	high
4	highest

.1.3.6.1.4.1.6296.101.10.3.1.1.22

sleUserFlowMatchCounterId

The counter index to be apply for the matched packets.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.23

sleUserFlowMatchTrafficProfileId

The traffic profile index to be apply
for the matched packets.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.24

sleUserFlowMatchQueue

TThe CoS value to be assign for the nomatched packets

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6296.101.10.3.1.1.25

sleUserFlowMatchIpPktPriorityType

The Priority type to be applied to incoming IP packet.

Enumeration

Enumerated Values:

1	ipPrecedence
2	diffServ
3	ipToS

.1.3.6.1.4.1.6296.101.10.3.1.1.26

sleUserFlowMatchIpPktPriority

The Priority value in incoming IP packet.
If sleUserFlowMatchIpPktPriorityType is 1,
then this value's range is 0-7.
If sleUserFlowMatchIpPktPriorityType is 2,
then this value's range is 0-63.
If sleUserFlowMatchIpPkt…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.27

sleUserFlowMatchRedirPort

The port to redirect to a matched packet.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.28

sleUserFlowMatchVid

The vlan id to be assigned for the matched packets

Integer32

Constraints:
range: 1-4096

.1.3.6.1.4.1.6296.101.10.3.1.1.29

sleUserFlowMatchDstMac

Description.

OctetString

.1.3.6.1.4.1.6296.101.10.3.1.1.30

sleUserFlowMatchPortMap

Description.

OctetString

.1.3.6.1.4.1.6296.101.10.3.1.1.31

sleUserFlowMatchEgressType

Description.

Enumeration

Enumerated Values:

0	dmac
1	egressPorts
2	filterPorts

.1.3.6.1.4.1.6296.101.10.3.1.1.32

sleUserFlowMatchAction

The action to be apply for matched packets.

Bits

Enumerated Values:

0	ufActDeny
1	ufActCopytoCpu
2	ufActSameAsTos
3	ufActSameAsCos
4	ufActMirror
5	ufActCounter
6	ufActTrafficeProfile
7	ufActQueue
8	ufActIpPktPriority
9	ufActRedirPort
10	ufAct8021p
11	ufActVid
12	ufActEgress
13	ufActColorMarking
14	ufActRoute
15	ufActRouteReachability

.1.3.6.1.4.1.6296.101.10.3.1.1.33

sleUserFlowNomatchCounterId

The counter index to be apply for the nomatched packets.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.34

sleUserFlowNomatchTrafficProfileId

The traffic profile index to be apply
for the nomatched packets.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.35

sleUserFlowNomatchQueue

The CoS value to be assign for the nomatched packets

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6296.101.10.3.1.1.36

sleUserFlowNomatchIpPktPriorityType

The Priority type to be applied to incoming IP packet, in case nomatched.

Enumeration

Enumerated Values:

1	ipPrecedence
2	diffServ
3	ipToS

.1.3.6.1.4.1.6296.101.10.3.1.1.37

sleUserFlowNomatchIpPktPriority

The Priority value in incoming IP packet.
If sleUserFlowNomatchIpPktPriorityType is 1,
then this value's range is 0-7.
If sleUserFlowNomatchIpPktPriorityType is 2,
then this value's range is 0-63.
If sleUserFlowNomatc…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.38

sleUserFlowNomatchRedirPort

The port to redirect to nomatched packet.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.39

sleUserFlowNomatchVid

The vlan id to be assigned for the nomatched packets

Integer32

Constraints:
range: 0-4096

.1.3.6.1.4.1.6296.101.10.3.1.1.40

sleUserFlowNomatchAction

The action to be apply for nomatched packets.

Bits

Enumerated Values:

0	ufActDeny
1	ufActCopytoCpu
2	ufActSameAsTos
3	ufActSameAsCos
4	ufActMirror
5	ufActCounter
6	ufActTrafficeProfile
7	ufActQueue
8	ufActIpPktPriority
9	ufActRedirPort
10	ufAct8021p
11	ufActVid
12	ufActEgress

.1.3.6.1.4.1.6296.101.10.3.1.1.41

sleUserFlowMatchColorMarkingId

The colormarking profile index to be apply for the matched packet.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.42

sleUserFlowNomatchColorMarkingId

The colormarking profile index to be apply for the unmatched packet. (not supported)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.3.1.1.43

sleUserFlowInnerVlan

Inner VLAN ID in QinQ

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.6296.101.10.3.1.1.44

sleUserFlowInner8021p

The value of the inner IEEE802.1p priority in the packet

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6296.101.10.3.1.1.45

sleUserFlowMatchRoutePrimary

The policy-based-routing primary route

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.6296.101.10.3.1.1.46

sleUserFlowMatchRouteSecondary

The policy-based-routing secondary route

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.6296.101.10.3.1.1.47

slePortSchedultTable

table

.1.3.6.1.4.1.6296.101.10.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk slePortSchedultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::slePortSchedultTable'

Description.

slePortSchedultEntry row .1.3.6.1.4.1.6296.101.10.4.1.1

Description.

Indexes

slePortSchedulInterfaceIndex

Column Syntax OID

slePortSchedulInterfaceIndex

Interface Index

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.6296.101.10.4.1.1.1

slePortScheduleMode

The scheduling mode of port

Enumeration

Enumerated Values:

1	strictqueueing
2	wrr
3	wfq
4	rr
5	drr

.1.3.6.1.4.1.6296.101.10.4.1.1.2

sleQueueTable

table

.1.3.6.1.4.1.6296.101.10.5.1 · 1 row entry · 14 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::sleQueueTable'

Description.

sleQueueEntry row .1.3.6.1.4.1.6296.101.10.5.1.1

Description.

Indexes

slePortSchedulInterfaceIndex sleQueueId

Column Syntax OID

sleQueueId

queue index

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6296.101.10.5.1.1.1

sleQueueREDEnable

Description.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.6296.101.10.5.1.1.2

sleQueueMappedCoS

Description.

Bits

Enumerated Values:

0	cos0
1	cos1
2	cos2
3	cos3
4	cos4
5	cos5
6	cos6
7	cos7

.1.3.6.1.4.1.6296.101.10.5.1.1.3

sleQueueWREDMinThreshold

The total number of packets where WRED can start

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.4

sleQueueWREDMaxThreshold

Above max threshold, queue drops all ingress

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.5

sleQueueWREDProbMax

The worst case random drop probability

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.6296.101.10.5.1.1.6

sleQueueMinBandwidth

The value is unit of 64kbps

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.7

sleQueueMaxBandwidth

The value is unit of 64 kbps.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.8

sleQueueWeight

The weight of this queue.
The value of -1 is unlimited

Integer32

Constraints:
range: 1-255
range: -1--1

.1.3.6.1.4.1.6296.101.10.5.1.1.9

sleQueueMaxLatency

Description.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.10

sleQueueMaxPackets

Description.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.5.1.1.11

sleQueueQuantum

The DRR quantum value.

Integer32

Constraints:
range: 1-127
range: -1--1

.1.3.6.1.4.1.6296.101.10.5.1.1.12

sleQueueUsedPkts

The used packets of port/queue.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6296.101.10.5.1.1.13

sleQueueUsedBytes

The used bytes of port/queue.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6296.101.10.5.1.1.14

sleCounterTable

table

.1.3.6.1.4.1.6296.101.10.6.1 · 1 row entry · 2 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::sleCounterTable'

Description.

sleCounterEntry row .1.3.6.1.4.1.6296.101.10.6.1.1

Description.

Indexes

sleCounterIndex

Column	Syntax	OID
sleCounterIndex The Counter Index	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.6296.101.10.6.1.1.1`
sleCounterPackets Number of packets	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6296.101.10.6.1.1.2`

sleColorMarkingTable

table

.1.3.6.1.4.1.6296.101.10.7.1 · 1 row entry · 16 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleColorMarkingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-QOS-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-QOS-MIB::sleColorMarkingTable'

Description.

sleColorMarkingEntry row .1.3.6.1.4.1.6296.101.10.7.1.1

Description.

Indexes

sleColorMarkingIndex

Column Syntax OID

sleColorMarkingIndex

Color marking table index.

Integer32

Constraints:
range: 1-2048

.1.3.6.1.4.1.6296.101.10.7.1.1.1

sleColorMarkingType

Color marking type.
srTCM = Single Rate Three Color Marking.
trTCM = Two Rate Three Color Marking.

EnumEnumeration

Enumerated Values:

0	srTCM
1	trTCM

.1.3.6.1.4.1.6296.101.10.7.1.1.2

sleColorMarkingMode

Color marking mode.

EnumEnumeration

Enumerated Values:

0	blind
1	aware

.1.3.6.1.4.1.6296.101.10.7.1.1.3

sleColorMarkingAwareMode

Color marking aware mode.
Used only when sleColorMarkingMode is aware.

EnumEnumeration

Enumerated Values:

1	unprotected
2	protected

.1.3.6.1.4.1.6296.101.10.7.1.1.4

sleColorMarkingCIR

Committed Information Rate.
The value is in unit for 64 kbps.

IntegerInteger32

Constraints:
range: 1-1000000

.1.3.6.1.4.1.6296.101.10.7.1.1.5

sleColorMarkingCBS

Committed Burst Size.
The value is in unit for square of 2 bits.

IntegerInteger32

Constraints:
range: 1-4000

.1.3.6.1.4.1.6296.101.10.7.1.1.6

sleColorMarkingPIR

Peak Information Rate.
*) Used only when sleColorMarkingMode is Aware.
The value is in unit for 64 kbps.
.

Integer Integer32

Constraints:
range: 1-1000000

.1.3.6.1.4.1.6296.101.10.7.1.1.7

sleColorMarkingPBS

Peak Burst Size.
*) Used only when sleColorMarkingMode is Aware.
The value is in unit for square of 2 bits.

Integer Integer32

Constraints:
range: 1-4000

.1.3.6.1.4.1.6296.101.10.7.1.1.8

sleColorMarkingEBS

Excess Burst Size.
*) Used only when sleColorMarkingMode is Blind.
The value is in unit for square of 2 bits.

Integer Integer32

Constraints:
range: 1-4000

.1.3.6.1.4.1.6296.101.10.7.1.1.9

sleColorMarkingRedAction

The action to be apply when incoming packet is colored in red.

bitsBits

Enumerated Values:

0	reserve0
1	reserve1
2	reserve2
3	reserve3
4	reserve4
5	dropProcedence
6	marking
7	drop
8	dropPrecedenceGreen
9	dropPrecedenceYellow
10	dropPrecedenceRed

.1.3.6.1.4.1.6296.101.10.7.1.1.10

sleColorMarkingYellowAction

The action to be apply when incoming packet is colored in yellow.

bitsBits

Enumerated Values:

0	reserve0
1	reserve1
2	reserve2
3	reserve3
4	reserve4
5	dropProcedence
6	marking
7	drop
8	dropPrecedenceGreen
9	dropPrecedenceYellow
10	dropPrecedenceRed

.1.3.6.1.4.1.6296.101.10.7.1.1.11

sleColorMarkingGreenAction

The action to be apply when incoming packet is colored in green. (not supported)

bitsBits

Enumerated Values:

0	reserve0
1	reserve1
2	reserve2
3	reserve3
4	reserve4
5	dropProcedence
6	marking
7	drop
8	dropPrecedenceGreen
9	dropPrecedenceYellow
10	dropPrecedenceRed

.1.3.6.1.4.1.6296.101.10.7.1.1.12

sleColorMarkingRedDscp

The dscp value to be apply when incoming packet is colored in red.

Integer Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6296.101.10.7.1.1.13

sleColorMarkingYellowDscp

The dscp value to be apply when incoming packet is colored in yellow.

Integer Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6296.101.10.7.1.1.14

sleColorMarkingGreenDscp

The dscp value to be apply when incoming packet is colored in green. (not supported)

Integer Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6296.101.10.7.1.1.15

sleColorMarkingUseCount

The number of rules used this color marking profile.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.10.7.1.1.16