SLE-MPLS-TP-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
33

sleMplsTpTunnelCfgInfoTable

table
.1.3.6.1.4.1.6296.101.16.14.1.1 · 1 row entry · 33 columns
Open in standard view
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk sleMplsTpTunnelCfgInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-MPLS-TP-TUNNEL-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-MPLS-TP-TUNNEL-MIB::sleMplsTpTunnelCfgInfoTable' 
The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point tunnel segments are
supported, although multipoint-to-point and point-
to-multipoint connections are supported by an LSR
acting as a cross-connect.  Each MPLS tunnel can
thus have one out-segment originating at this LSR
and/or one in-segment terminating at this LSR.
sleMplsTpTunnelCfgInfoEntry row .1.3.6.1.4.1.6296.101.16.14.1.1.1
An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signalling protocol. Whenever a new entry is
created with mplsTunnelIsIf …
Indexes
Column Syntax OID
sleMplsTpTunnelCfgInfoIndex
A unique value which identify an entry in this table.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.1
sleMplsTpTunnelCfgInfoName
The canonical name assigned to the tunnel. This name
can be used to refer to the tunnel on the LSR's
console port. If mplsTunnelIsIf is set to true
then the ifName of the interface corresponding to
this tunnel should h…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.2
sleMplsTpTunnelCfgInfoId
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
Managers should obtain new values for row
creation in this table by reading
mplsTunnelIndexNext. When
the MPLS signalling protocol…
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.3
sleMplsTpTunnelCfgInfoSrcIdType
This object is used to set the ietf or itut type.
Enumeration
Enumerated Values:
1ietf
2itut
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.4
sleMplsTpTunnelCfgInfoSrcGId
This Object is used to display the GlobalID of IETF
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.5
sleMplsTpTunnelCfgInfoSrcCc
This Object is used to display the Source CC-ID of ITUT
MPLS-TC-EXT-STD-MIBMplsCcId
Type Constraints:
range: 0
range: 2
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.6
sleMplsTpTunnelCfgInfoSrcIcc
This Object is used to set the Source ICC-ID of ITUT
MPLS-TC-EXT-STD-MIBMplsIccId
Type Constraints:
range: 0..6
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.7
sleMplsTpTunnelCfgInfoSrcNodeId
This Object is used to display the Source Node ID of IETF and ITUT
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.8
sleMplsTpTunnelCfgInfoDestIdType
This object is used to set the ietf or itut type.
Enumeration
Enumerated Values:
1ietf
2itut
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.9
sleMplsTpTunnelCfgInfoDestGId
This Object is used to set the Destination GlobalID of IETF
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.10
sleMplsTpTunnelCfgInfoDestCc
This Object is used to display the Destination CC-ID of ITUT
MPLS-TC-EXT-STD-MIBMplsCcId
Type Constraints:
range: 0
range: 2
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.11
sleMplsTpTunnelCfgInfoDestIcc
This Object is used to set the Destination ICC-ID of ITUT
MPLS-TC-EXT-STD-MIBMplsIccId
Type Constraints:
range: 0..6
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.12
sleMplsTpTunnelCfgInfoDestNodeId
This Object is used to display the Destination Node ID of IETF and ITUT
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.13
sleMplsTpTunnelCfgInfoMode
This object is used to set the Tunnel Mode
Enumeration
Enumerated Values:
0none
1unidirectional
2bidirectional
3corouted
4associate
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.14
sleMplsTpTunnelCfgInfoFwdInLabel
This object is used to display the Forward In Label.
The lable range is 0 to 1048575. Here 0 to 15 are
reserved labels. User allowed range is 16 to 1048575..

The default value 1048576 is invalid label
MPLS-TC-STD-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.15
sleMplsTpTunnelCfgInfoFwdInIfIndex
This object is used to set the Forward IN Interface index
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.16
sleMplsTpTunnelCfgInfoFwdOperation
This object is used to set the Forward Ilm OPeration .
Enumeration
Enumerated Values:
0none
1push
2pop
3swap
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.17
sleMplsTpTunnelCfgInfoFwdOutLabel
This object is used to display the Forward In Label.
The lable range is 0 to 1048575. Here 0 to 15 are
reserved labels. User allowed range is 16 to 1048575.

The default value 1048576 is invalid label
MPLS-TC-STD-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.18
sleMplsTpTunnelCfgInfoFwdOutIfIndex
This object is used to set the Forward OUT Interface index
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.19
sleMplsTpTunnelCfgInfoFwdOutMac
This object is used to display the Forward OUT MAC ADDRESS
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.20
sleMplsTpTunnelCfgInfoRevInLabel
This object is used to display the Forward In Label.
The lable range is 0 to 1048575. Here 0 to 15 are
reserved labels. User allowed range is 16 to 1048575.

The default value 1048576 is invalid label
MPLS-TC-STD-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.21
sleMplsTpTunnelCfgInfoRevInIfIndex
This object is used to set the Reverse IN Interface index
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.22
sleMplsTpTunnelCfgInfoRevOperation
This object is used to set the Reverse Ilm OPeration .
Enumeration
Enumerated Values:
0none
1push
2pop
3swap
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.23
sleMplsTpTunnelCfgInfoRevOutLabel
This object is used to display the Forward In Label.
The lable range is 0 to 1048575. Here 0 to 15 are
reserved labels. User allowed range is 16 to 1048575.

The default value 1048576 is invalid label
MPLS-TC-STD-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.24
sleMplsTpTunnelCfgInfoRevOutIfIndex
This object is used to set the Reverse OUT Interface index
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.25
sleMplsTpTunnelCfgInfoRevOutMac
This object is used to display the Forward OUT MAC ADDRESS .
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.26
sleMplsTpTunnelCfgInfoState
This object is to display status of the tunnel.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.27
sleMplsTpTunnelCfgInfoRole
This object is to display Role of the tunnel.
Enumeration
Enumerated Values:
0source
1transist
2destination
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.28
sleMplsTpTunnelCfgInfoAssociateTnlName
This object to display associate of reverse tunnel.
OctetString .1.3.6.1.4.1.6296.101.16.14.1.1.1.29
sleMplsTpTunnelCfgInfoDescription
Description.
OctetString .1.3.6.1.4.1.6296.101.16.14.1.1.1.30
sleMplsTpTunnelCfgInfoHlspRole
This object is used to set the Hlsp Tunnel. whether the tunnel is Server or client.
server (1) :- To set the Server Tunnel
client(2) :- To set the Client Tunnel .
Enumeration
Enumerated Values:
1server
2client
 .1.3.6.1.4.1.6296.101.16.14.1.1.1.31
sleMplsTpTunnelCfgInfoHlspServerTunnelName
This object is used to set the server TunnelName,
when sleMplsTpTunnelCfgControlHlspOption as a client .
OctetString .1.3.6.1.4.1.6296.101.16.14.1.1.1.32
sleMplsTpTunnelCfgInfoQosPolicyName
This object is used to set the Qos Policy name.
OctetString .1.3.6.1.4.1.6296.101.16.14.1.1.1.33