SL-OTDR-MIB Table View

Only one entry in the table.
Thus this is a dummy ifIndex that equals to 1.

The OTDR module admin status.
0 - DOWN, 1 - UP.

The OTDR module operational status.
0 - DOWN, 1 - UP.

The OTDR module part number.

The OTDR module serial number.

The OTDR module manufacturer

The OTDR module hardware revision.
Format: <Major>.<Minor>
Example: 2.3

The OTDR module firware revision.
Format: <Major>.<Minor>.<Implementation>
Example: 2.3.1

The port number to lock.
If 0 -> no lock, otherwise lock to 1-8 port number.
Default: 0

Count the number of the measurements cycles.
Initial value: 0

The dynamic range of the OTDR in dB units. E.g. 30dB or 40dB

The ifIndex of the OTDR port 1-8.

The port admin status.
0 - DOWN, 1 - UP.

The port operational status.
0 - DOWN, 1 - UP.

The port alias.

User Index of Refraction, multilplied by 10^6.
E.g. the value 1400000 is equivalent to IOR 1.4.
Range: Value should be between 1400000 to 1700000
Default: 1468000

The threshold for Splice LOS detection in units of 0.01 dB.
E.g. the value 145 is equivalent to 1.45 dB.
Range: 0 to 999
Default: 30 (0.3 dB)

The threshold for Reflectance in units of -0.01 dB.
E.g. the value 3000 is equivalent to -30 dB.
Range: 1400 to 8000
Default: 3000 (-30 dB)

Measurement time in seconds.
Range: 5 to 300.
Default: 60

The expected fiber distance in km units.
Legal values: 5, 25, 50, 125.
Default: 125 km

Pulse Width in ns units.
Legal values: 10, 30, 100, 300, 1000, 3000, 10000, 20000.
Default: 3000 ns

Measurement resulution in units of cm.
Legal values: 32, 64, 120, 250, 500, 1000, 2000, 4000.
Default: 1000 equivalent to 10 m

The threshold for End Of Fiber detection in units of 0.1 dB.
E.g. the value -145 is equivalent to -14.5 dB.
Range: 0 to 999
Default: -30 (-3 dB)

A toggle value.
Writing this object Save or Remove the reference events for that port.
Reading the value of this object returns:
0 - if the reference events are removed,
1 - if the reference events are saved

The ifIndex of the OTDR port 1-8.

The index of the event table.
Two tables may exist:
1 - the current table
2 - the reference table.
The current event table holds the result events of the last measurement.
The reference table is optional and availa…

The index of the event 0..99.

The event type:
0 - Non-reflective,
1 - Reflective.
3 - End of Fiber

The distance from start to the event in Meters

The event reflectance in dB*1000

The event loss in dB*1000

The total loss to the event in dB*1000