SIAE-USER-MIB Table View

Table with Group records.

accessControlGroupRecord row .1.3.6.1.4.1.3373.1103.5.2.1

Group record. At most 10 records can be present in
accessControlGroupTable.

Indexes

accessControlGroupName

Column	Syntax	OID
accessControlGroupName ASCII string identifying the Group, used as index for the table.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.2.1.1
accessControlGroupProfile This object defines the group access privileges. 'Admin' profile can read and write all MIB, 'readwrite' profile can write all MIB leaves but it can not manage users, 'maintenance' profile can do only manual operations,…	Enumerationr/w Enumerated Values: 1 admin 2 readwrite 3 maintenance 4 readonly 5 networkMngr	.1.3.6.1.4.1.3373.1103.5.2.1.2
accessControlGroupHttp This object allows or denies a given group using http protocol for WebLct to access equipment.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.3
accessControlGroupHttps This object allows or denies a given group using https protocol for WebLct to access equipment.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.4
accessControlGroupSnmp This object allows or denies a given group using snmp protocol to access network equipment. If snmp protocol is enabled, it is possible to choose between V1, V2c and V3 versions of snmp.	Enumerationr/w Enumerated Values: 1 deny 2 allowV1 3 allowV2c 4 allowV3	.1.3.6.1.4.1.3373.1103.5.2.1.5
accessControlGroupFtp This object allows or denies a given group using ftp protocol.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.6
accessControlGroupSftp This object allows or denies a given group using sftp protocol.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.7
accessControlGroupSsh This object allows or denies a given group using ssh protocol.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.8
accessControlGroupRowStatus This object is used to manage a row in accessControlGroupTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.5.2.1.9
accessControlGroupCli This object allows or denies a given group using both cli through serial port and remote cli (telnet). Only 'admin' profile is allowed to use cli and can execute all commands.	Enumeration Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.3373.1103.5.2.1.10

Table with User records. At most 10 records can be present in 
accessControlUserTable.

accessControlUserRecord row .1.3.6.1.4.1.3373.1103.5.3.1

User record.

Indexes

accessControlUserName

Column	Syntax	OID
accessControlUserName ASCII string identifying the user.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.3.1.1
accessControlUserGroupName This object specifies which group this user belongs to. It must refers to an entry of accessControlGroupTable.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.3.1.2
accessControlUserPwd This object specifies the login password of the specified user.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.3.1.3
accessControlUserSnmpAuthProt This object is used to set the user authentication protocol if the related group can use snmp protocol.	Enumerationr/w Enumerated Values: 1 noAuth 2 md5 3 sha	.1.3.6.1.4.1.3373.1103.5.3.1.4
accessControlUserSnmpAuthKey This object specifies the user authentication key if the related group can use snmpv3 protocol.	OctetStringr/w	.1.3.6.1.4.1.3373.1103.5.3.1.5
accessControlUserSnmpPrivProt This object is used to set the user cipher protocol if the related group can use snmp protocol.	Enumerationr/w Enumerated Values: 1 noPriv 2 des 3 aes	.1.3.6.1.4.1.3373.1103.5.3.1.6
accessControlUserSnmpPrivKey This object specifies the user cipher key if the related group can use snmpv3 protocol.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.3373.1103.5.3.1.7
accessControlUserTimeout This object defines the user timeout after login operation. Zero timeout means no timeout.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.3373.1103.5.3.1.8
accessControlUserRowStatus This object is used to manage an instance in accessControlUserTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.5.3.1.9

Table with Login records. At most 4 users via WebLct,
10 users via snmp and 10 users via cli can be logged 
at the same time in the equipment.

accessControlLoginRecord row .1.3.6.1.4.1.3373.1103.5.4.1

Login record. The create operation is performed by setting
accessControlLoginPwd object.

Indexes

accessControlLoginIpAddress accessControlLoginUserName accessControlLoginType

Column	Syntax	OID
accessControlLoginUserName This object defines the name of the logged user.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.4.1.1
accessControlLoginIpAddress This object defines the IP address of the logged user.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3373.1103.5.4.1.2
accessControlLoginRequest This object is used to do logout or to force logout of other users. Only users with 'admin' profile can force logout.	Enumerationr/w Enumerated Values: 1 noAction 2 logout 3 forcelogout	.1.3.6.1.4.1.3373.1103.5.4.1.3
accessControlLoginTrapEnable This object enables/disables trap receiver for a given user.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.5.4.1.4
accessControlLoginType This object identifies login type.	Enumeration Enumerated Values: 1 web 2 snmp 3 cli	.1.3.6.1.4.1.3373.1103.5.4.1.5
accessControlLoginPwd This object is used to create a row in the table. It must correspond to the user password defined in accessControlUserTable.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.4.1.6
accessControlLoginPolling This object is used to refresh the timeout of the related instance of the table. To keep user logged in, manager must read this object before the end of accessControlUserTimeout. For cli users execution of cli command…	Enumeration Enumerated Values: 1 polling	.1.3.6.1.4.1.3373.1103.5.4.1.7

Table with records that show client credentials to 
access FTP and SFTP services.

accessControlClientRecord row .1.3.6.1.4.1.3373.1103.5.5.1

Client credentials record for a given user.

Indexes

accessControlClientService

Column	Syntax	OID
accessControlClientService This object is used to identify the service that a given user can access as client.	Enumerationr/w Enumerated Values: 1 ftp 2 sftp	.1.3.6.1.4.1.3373.1103.5.5.1.1
accessControlClientServiceStatus This object is used to enable/disable the FTP/SFTP client on the equipment. If both clients are enabled, SFTP client is adopted.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.5.5.1.2
accessControlClientName ASCII string identifying the client name.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.5.1.3
accessControlClientPwd ASCII string identifying the client password.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.3373.1103.5.5.1.4
accessControlClientStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3373.1103.5.5.1.5
accessControlClientRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.5.5.1.6

A table that contains additional information about
every user that is logged into the equipment.

accessControlExtLoginRecord row .1.3.6.1.4.1.3373.1103.5.6.1

Additional information record for a given logged
user.

Indexes

No indexes recorded

Column	Syntax	OID
accessControlExtLoginProfile This object defines the access privileges associated to logged user. 'Admin' profile can read and write all MIB, 'readwrite' profile can write all MIB leaves but it can not manage users, 'maintenance' can do only man…	Enumeration Enumerated Values: 1 admin 2 readwrite 3 maintenance 4 readonly	.1.3.6.1.4.1.3373.1103.5.6.1.1
accessControlExtLoginAuthMode This object shows if logged user has been authenticated locally or by remote server (i.e RADIUS, TACACS, etc...).	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.3373.1103.5.6.1.2

A list of security enhancement services.
This table is useful to show the manager the
status of all security services available
on the equipment.

accessControlSecurityEnhEntry row .1.3.6.1.4.1.3373.1103.5.7.1

An entry containing management information
applicable to a given security service on the
equipment.

Indexes

accessControlSecurityEnhIndex

Column	Syntax	OID
accessControlSecurityEnhIndex A unique value, greater than zero, for each security service. It is recommended that values are assigned contiguously starting from 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.5.7.1.1
accessControlSecurityEnhName ASCII string to identify the security service.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.5.7.1.2
accessControlSecurityEnhAdminStatus Object used to enable/disable a given security service on the equipment.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.5.7.1.3
accessControlSecurityEnhRowStatus Status of this conceptual row in accessControlSecurityEnhTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.5.7.1.4

This table is intended to gather the configuration
items related to enhanced security services.

accessControlSecurityEnhConfEntry row .1.3.6.1.4.1.3373.1103.5.8.1

An entry containing management information
applicable to a given security service on the
equipment.

Indexes

accessControlSecurityEnhConfIndex

Column	Syntax	OID
accessControlSecurityEnhConfIndex accessControlSecurityEnhConfTable index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.5.8.1.1
accessControlUserLockoutTime This object indicates the user lockout time expressed in minutes after given number of login failures.	minInteger32r/w Constraints: range: 5-60	.1.3.6.1.4.1.3373.1103.5.8.1.2
accessControlUserLockoutMaxRetries This object indicates the max number of login retries. When max number of retries is exceeded user account is locked.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.3373.1103.5.8.1.3
accessControlUserPwdExpirationTimeout This object indicates the password expiration timeout, i.e. the number of days since the last password set or change, during which a password is valid. A user is forced to change his password, once its related expiratio…	Integer32r/w Constraints: range: 1-105	.1.3.6.1.4.1.3373.1103.5.8.1.4
accessControlUserAdminPwdMinimalLength This object indicates the password minimal length for admin users.	Integer32r/w Constraints: range: 8-15	.1.3.6.1.4.1.3373.1103.5.8.1.5
accessControlUserOthersPwdMinimalLength This object indicates the password minimal length for others (not admin) users.	Integer32r/w Constraints: range: 8-15	.1.3.6.1.4.1.3373.1103.5.8.1.6
accessControlSecurityEnhConfRowStatus Status of this conceptual row in accessControlUserLockoutTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.5.8.1.7

This table includes additional information about the
current status of each user.

accessControlExtUserRecord row .1.3.6.1.4.1.3373.1103.5.9.1

Additional information record for an user.

Indexes

No indexes recorded

Column	Syntax	OID
accessControlUserLoginStatus This indicates the current status of user versus login: -bit 7: = 1 user login is currently locked out -bit 6: = 1 user password is expired -bit 5: = 1 user is currently logged in through SNMP -bit 4: = 1 user is curren…	Bits Enumerated Values: 0 accessControlUserLockedOut 1 accessControlUserPasswordExpired 2 accessControlUserSnmpLogin 3 accessControlUserWebLogin 4 accessControlUserCliLogin	.1.3.6.1.4.1.3373.1103.5.9.1.1