SIAE-MAB-MIB Table View

Table with MAB sensors entries. Each sensor is associated to a
interface, usually an interface with the physical layer
consisting of a radio link, and comapares the current bandwidth
(throughput) with the nominal one. When nominal and current
bandwidth doesn't match to PDU senders associated with a sensor
is required to send a MAB PDU every observation time.

mabSensorEntry row .1.3.6.1.4.1.3373.1103.93.2.1

A row in the mabSensorTable.

Indexes

mabSensorIndex

Column	Syntax	OID
mabSensorIndex This object identifies the MAB sensor inside the Network Element.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.2.1.1
mabSensorRowStatus The status of this MAB sensor entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value: mabSensorIfIndex must be set to a valid ifIndex number. Otherwise…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.93.2.1.2
mabSensorAdminStatus Administative status of the MAB sensor. The value down(1) turn off all MAB advisers associated with this sensor.	Enumerationr/w Enumerated Values: 1 down 2 up	.1.3.6.1.4.1.3373.1103.93.2.1.3
mabSensorIfIndex This object accepts a greater than zero value to identify an interface in ifTable. The throughput of the selected interface is monitored and notified to all MAB PDU sender associated with this sensor.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.3373.1103.93.2.1.4
mabSensorLinkId This object set the (radio) link identifier that will be inserted in the Link ID TLV of the MAB PDU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.2.1.5
mabSensorBwMode This object defines the method of calculation of the current bandwidth. The value of this parameter is sent inside MAB PDUs.	MabBwCalculationMethodr/w Type Values: 1 average 2 min 3 max	.1.3.6.1.4.1.3373.1103.93.2.1.6
mabSensorHoldoffTime This object defines the wait time (in seconds) for MAB protocol before sending packets if the current bandwidth (throughput) is lower than the nominal.	Integer32r/w Constraints: range: 10-60	.1.3.6.1.4.1.3373.1103.93.2.1.7
mabSensorObservationTime This object defines the observation time (in seconds) for MAB protocol during which calculate the minimum, maximum and average value of the current bandwidth (throughput). At the end of each period, a MAB PDU is sent by…	Integer32r/w Constraints: range: 1-1 range: 10-10 range: 60-60	.1.3.6.1.4.1.3373.1103.93.2.1.8
mabSensorFastTime This value is used in place of mabSensorObservationTime for the first mabSensorFastCount PDU packets sent by a MAB PDU sender. The value of mabSensorFastTime must be less than or equal to mabSensorObservationTime.	Integer32r/w Constraints: range: 1-59	.1.3.6.1.4.1.3373.1103.93.2.1.9
mabSensorFastCount This value specifies how many MAB PDU packets are sent every mabSensorFastTime before to use the standard observation time (mabSensorObservationTime). Zero means which quick sending of packets is disabled.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.3373.1103.93.2.1.10

Table with the status of MAB sensor entries. For each row in
mabSensorTable a row is created in this table.

mabSensorStatusEntry row .1.3.6.1.4.1.3373.1103.93.3.1

A row in the mabSensorTable.

Indexes

mabSensorIndex

Column	Syntax	OID
mabSensorNominalBw This object reports the nominal bandwidth (throughput) of the interface selected by mabSensorIfIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.3.1.1
mabSensorCurrentBw This object reports the current bandwidth (throughput) of the interface selected by mabSensorIfIndex and calculated according to the method set in mabSensorBwMode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.3.1.2

Table with MAB PDU sender entries. Each PDU sender refers to an
ifIndex in ifTable on which to send a PDU MAB and a sensor that
triggers the sending.

mabPduSenderEntry row .1.3.6.1.4.1.3373.1103.93.4.1

A row in the mabPduSenderTable.

Indexes

mabPduSenderIndex

Column	Syntax	OID
mabPduSenderIndex This object identifies the MAB PDU sender inside the Network Element.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.4.1.1
mabPduSenderRowStatus The status of this mabPduSender entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value: mabPduSenderIfIndex must be set to a valid ifIndex number and m…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.93.4.1.2
mabPduSenderAdminStatus Administative status of the MAB PDU sender.	Enumerationr/w Enumerated Values: 1 down 2 up	.1.3.6.1.4.1.3373.1103.93.4.1.3
mabPduSenderIfIndex This object accepts a greater than zero value to identify an interface in ifTable. MAB PDU is sent over this interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.3373.1103.93.4.1.4
mabPduSenderSensorIndex This object associates a MAB sensor to this PDU sender.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.93.4.1.5
mabPduSenderVlanId This object defines the VLAN identifier used to tag the MAB PDU. Zero means the PDU is not tagged.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.3373.1103.93.4.1.6
mabPduSenderPcp This object defines packet priority written into the tag of the MAB PDU.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3373.1103.93.4.1.7
mabPduSenderOamMaintLevel This object defines the OAM maintenance level of the MAB PDU. The multicast destination address of the PDU is according to the selected maintenance level: 01-80-C2-00-00-3x where x = Maintenance Level	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3373.1103.93.4.1.8
mabPduSenderDAType This object defines the destination MAC address type of the PDU: - multicastDA(1): Multicast Class 1 Destination Address (DA) - unicastDA(2): Unicast Destination Address (DA)	Enumerationr/w Enumerated Values: 1 multicastDA 2 unicastDA	.1.3.6.1.4.1.3373.1103.93.4.1.9
mabPduSenderUnicastDA This object defines the unuicast destination address of the PDU when mabPduSenderDAType is set to unicastDA(2).	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3373.1103.93.4.1.10
mabPduSenderOption This object enable the option supported by the MAB PDU sender: - enableAlways: Enable periodic PDU sending even if the current bandwidth is equal to the nominal bandwidth. - e…	MabSenderOptionr/w Type Values: 0 enableAlways 1 enableSignalFail	.1.3.6.1.4.1.3373.1103.93.4.1.11
mabPduSenderPduCompliance This object defines the compliance of the MAB PDU format.	MabPduCompliancer/w Type Values: 1 stdMcmCompliant 2 extMcmCompliant 3 ituG8013Compliant	.1.3.6.1.4.1.3373.1103.93.4.1.12