SIAE-LLF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
19

llfTable

table
.1.3.6.1.4.1.3373.1103.85.2 · 1 row entry · 7 columns
Open in standard view 
Table with SIAE's LLF entries.
llfEntry entry .1.3.6.1.4.1.3373.1103.85.2.1
SIAE's LLF entry.
Indexes
llfIndex
Column Syntax OID
llfIndex
A unique value, greater than zero, for each
interface supporting LLF. This object is identical to the ifIndex
of the standard MIB-2 ifTable.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.3373.1103.85.2.1.1
llfEnable
On interfaces supporting LLF, this object is used to disable
or enable LLF towards local LAN interfaces.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.85.2.1.2
llfUnidirectionalFault
When enable is set, a local link fault causes LLF on both local
and remote interfaces.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.85.2.1.3
llfDelayTime
The LLF delay time specifies the time interval (in seconds)
to wait for to actuate or to remove the Link Loss Forwarding
condition.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.3373.1103.85.2.1.4
llfProtectionMode
When protection mode is enabled, LLF alarm is issued only when
all radio links or circuits connected to interface are alarmed.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.85.2.1.5
llfAlarm
Interface Link Loss Forwarding alarm status.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.85.2.1.6
llfRowStatus
Status of this row of llfTable.
This object may not be set to destroy until at least a circuit
belong to this LLF interface. In other words, circuits must be
deleted before a LLF interface.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.85.2.1.7

llfMapTable

table
.1.3.6.1.4.1.3373.1103.85.3 · 1 row entry · 7 columns
Open in standard view 
This table map llf interface on llf circuits.
llfMapEntry entry .1.3.6.1.4.1.3373.1103.85.3.1
SIAE's llf cross-connection entry.
Indexes
llfIndex llfMapLinkIndex llfMapPolIndex llfMapCircuitIndex
Column Syntax OID
llfMapLinkIndex
Radio link identifier. With llfMapPolIndex and llfMapCircuitIndex it points to a
specific instance of llfCircuitTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.3.1.1
llfMapPolIndex
Radio polarization identifier. With llfMapLinkIndex and llfMapCircuitIndex it points to a
specific instance of llfCircuitTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.3.1.2
llfMapCircuitIndex
LLF circuit identifier. With llfMapLinkIndex and llfMapPolIndex it points to a
specific instance of llfCircuitTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.3.1.3
llfMapLosInsertion
Enable or disable insertion of interface LOS into a specified
circuit. The inserted LOS is transported through the radio link.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.85.3.1.4
llfMapInsertionMode
In single mode, LOS is inserted in the circuit if the relative
interface has a LOS alarm.
In group mode, LOS is inserted when all (grouped) interfaces
mapped to the same circuit have a LOS alarm.
Enumerationr/w
Enumerated Values:
1single
2group
 .1.3.6.1.4.1.3373.1103.85.3.1.5
llfMapSignalFail
Alarm condition detected on specified circuit.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3373.1103.85.3.1.6
llfMapRowStatus
Status of this row of llfMapTable
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.85.3.1.7

llfCircuitTable

table
.1.3.6.1.4.1.3373.1103.85.4 · 1 row entry · 5 columns
Open in standard view 
Table describing llf circuits available over each link.
This circuits can be connected to available interfaces via
llfMapTable.
llfCircuitEntry entry .1.3.6.1.4.1.3373.1103.85.4.1
SIAE's llf circuit entry.
Indexes
llfCircuitLinkIndex llfCircuitPolIndex llfCircuitIndex
Column Syntax OID
llfCircuitLinkIndex
Radio link identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.4.1.1
llfCircuitPolIndex
Radio polarization identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.4.1.2
llfCircuitIndex
LLF circuit identifier.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.85.4.1.3
llfCircuitLinkLabel
ASCII string used to assign a name to the radio link and polarization.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.85.4.1.4
llfCircuitRowStatus
Status of this row of llfCircuitTable
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.85.4.1.5