SIAE-IFEXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
14

ifextTable

table
.1.3.6.1.4.1.3373.1103.73.2 · 1 row entry · 11 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk ifextTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-IFEXT-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-IFEXT-MIB::ifextTable' 
Table with SIAE's Interface extension records.
ifextTableEntry row .1.3.6.1.4.1.3373.1103.73.2.1
SIAE's Interface extension record.
Indexes
Column Syntax OID
ifextIfIndex
A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3373.1103.73.2.1.1
ifextLabel
A textual string containing information about the
interface.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.3373.1103.73.2.1.2
ifextAdminStatus
The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.

The testing…
Enumeration
Enumerated Values:
1up
2down
3testing
4loopback
5loopbackExternal
 .1.3.6.1.4.1.3373.1103.73.2.1.3
ifextPortUsage
Port usage in the system. lan(1) and radio(2) are traffic ports,
mgmt(3) are ports dedicated to management traffic, stack(4) ports
are port to interconnect switch to stack, aux(5) ports are ports
dedicated to other pur…
Enumeration
Enumerated Values:
0unused
1lan
2radio
3mgmt
4stack
5aux
6pwe3
 .1.3.6.1.4.1.3373.1103.73.2.1.4
ifextMediumType
Physical medium of this interface. Medium type 'combo'
can be set as copper or as fiber by ifextMediumSelection.
Enumeration
Enumerated Values:
1copper
2fiber
3combo
4other
 .1.3.6.1.4.1.3373.1103.73.2.1.5
ifextMediumSelection
Selection of physical medium of this interface. Only 'combo'
interfaces can be set as copper or as fiber.
Enumeration
Enumerated Values:
0none
1copper
2fiber
 .1.3.6.1.4.1.3373.1103.73.2.1.6
ifextAlarmReportEnable
On interfaces with ifextPortUsage set to mgmg, this object enables
or disables collection and report of the alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.73.2.1.7
ifextSfpId
This object specifies a row in sfpTable. This object is 0 if
there isn't any SFP connectied to this interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.73.2.1.8
ifextCapabilities
This indicates which capability is supported from this interface.
Bits
Enumerated Values:
0ifextCapabilityLoop
1ifextCapability2g5Bps
2ifextCapabilityMabSensor
3ifextCapabilityEncrypt
4ifextCapability10gBps
5ifextCapabilityIeee1588
6ifextCapabilityHRLmember
7ifextCapabilityHRLcarrier
8ifextCapabilityFixedSpeed
9ifextCapabilityPortProtection
 .1.3.6.1.4.1.3373.1103.73.2.1.9
ifextLosAlarm
Interface Loss of Signal alarm
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.73.2.1.10
ifextRowStatus
Status of this row of ifextTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3373.1103.73.2.1.11

ifextMaintTable

table
.1.3.6.1.4.1.3373.1103.73.3 · 1 row entry · 1 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk ifextMaintTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-IFEXT-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-IFEXT-MIB::ifextMaintTable' 
Table with objects used to maintain Interfaces described in 
ifextTable
ifextMaintTableEntry row .1.3.6.1.4.1.3373.1103.73.3.1
SIAE's Interface extension maintenance record.
Indexes
Column Syntax OID
ifextLineLoop
This object is set from admin status of an interface
to enable/disable line loop or external loop.
Enumeration
Enumerated Values:
1disable
2enable
3enableExt
 .1.3.6.1.4.1.3373.1103.73.3.1.1

ifextRmonTable

table
.1.3.6.1.4.1.3373.1103.73.4 · 1 row entry · 2 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk ifextRmonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-IFEXT-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-IFEXT-MIB::ifextRmonTable' 
Table with objects used to extend RMON per port parameters.
ifextRmonTableEntry row .1.3.6.1.4.1.3373.1103.73.4.1
SIAE's RMON extension record.
Indexes
Column Syntax OID
ifextRmonPortSpeedMode
This object select the current port speed or the configured port
speed (in ifextRmonPortSpeedValue) to be used to calculate the port
utilization in RMON history entries.
Enumerationr/w
Enumerated Values:
1rmonSpeedCurrent
2rmonSpeedConfigured
 .1.3.6.1.4.1.3373.1103.73.4.1.1
ifextRmonPortSpeedValue
The configured speed to be used to calculate the port utilization
in RMON history entries.
MbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.73.4.1.2