SIAE-CARRIER-AGGRL1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

carrierAggrSensorTable

table
.1.3.6.1.4.1.3373.1103.104.2 · 1 row entry · 9 columns
Open in standard view 
Table with Radio(s) interface(s) that can be associated 
to an entry of carrierAggrActuatorTable.
carrierAggrSensorEntry entry .1.3.6.1.4.1.3373.1103.104.2.1
A row in the carrierAggrSensorTable.
Indexes
carrierAggrSensorIndex
Column Syntax OID
carrierAggrSensorIndex
This object identifies the index of carrierAggrSensorTable.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.3373.1103.104.2.1.1
carrierAggrSensorRowstatus
The status of this sensor entry.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value: SensorIfIndex
must be set to a valid ifIndex number. Otherwise, the e…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.104.2.1.2
carrierAggrSensorAdminStatus
Administative status of the sensor.
The value down(1) turns off all actuators associated with
this sensor.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3373.1103.104.2.1.3
carrierAggrSensorIfIndex
This object accepts a greater than zero value to identify an
interface in ifTable. Some parameters of the radio associated to
this interface is monitored and a notification is sent
to all connected actuators.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3373.1103.104.2.1.4
carrierAggrSensorHitlessCapability
This capability is related to
HITLESS Behaviour carrierAggrSensorHitlessBehaviour.
Bits
Enumerated Values:
0hitlessAvailable
 .1.3.6.1.4.1.3373.1103.104.2.1.5
carrierAggrSensorHitlessBehaviour
The hitless behaviour. When enabled, data related to the current ACM zone
is notified to an external N.E. aggregator, so it can dynamically
exclude/include the data-flow without loss of frames.
It can be enabled only…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.104.2.1.6
carrierAggrSensorHitlessMode
The policy to select the hitless profile (i.e. the lowest one under
which a N.E. aggregator excludes the carrier from an existing aggregation).
auto(1): Tx Lower Profile + 1 is selected;
manual(2): the value set in car…
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.3373.1103.104.2.1.7
carrierAggrSensorHitlessProfile
The hitless profile in case of carrierHyAggrHitlessBehaviour
set as enabled and carrierHyAggrHitlessMode set as manual.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.104.2.1.8
carrierAggrSensorHitlessStatus
The working zone of the radio link.
Enumeration
Enumerated Values:
1goodZone
2hitlessZone
3badZone
 .1.3.6.1.4.1.3373.1103.104.2.1.9

carrierAggrActuatorTable

table
.1.3.6.1.4.1.3373.1103.104.3 · 1 row entry · 6 columns
Open in standard view 
Table with Lan(s) interface that can be associated
to an entry of carrierAggrSensorTable.
carrierAggrActuatorEntry entry .1.3.6.1.4.1.3373.1103.104.3.1
A row in the carrierAggrActuatorTable.
Indexes
carrierAggrActuatorIndex
Column Syntax OID
carrierAggrActuatorIndex
This object identifies the carrier aggr Actuator inside the
Network Element.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.3373.1103.104.3.1.1
carrierAggrActuatorRowStatus
The status of this entry.

An entry may not exist in the active state unless all objects in
the entry have an appropriate value: carrierAggrActuatorIfIndex
must be set to a valid ifIndex number and carrier…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.104.3.1.2
carrierAggrActuatorAdminStatus
Administative status of the actuator. The value down(1) turns it off.
Other actuators associated with the same sensor remain active.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3373.1103.104.3.1.3
carrierAggrActuatorIfIndex
This object accepts a greater than zero value to identify an
interface in ifTable. The notify received from the connected
sensor is forwarded to the remote aggregator to signal some
anomalies on this aggregated flow.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3373.1103.104.3.1.4
carrierAggrActuatorSensorIndex
This object connects this actuator to a sensor.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.104.3.1.5
carrierAggrActuatorConcIpAddr
This object is used to contain
the Ip address of the equipment connected with this Lan
(the concatenator unit)
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3373.1103.104.3.1.6