SIAE-AGGRL1-MANAGEMENT-MIB Table View

A list of capability entries to show the manager all the 
possible L1 aggregations.

aggrL1CapabilityEntry row .1.3.6.1.4.1.3373.1103.83.2.1

An entry showing the manager the aggregator and the aggregable
interfaces that can be involved in L1 aggregations.

Indexes

aggrL1CapabilityAggregableIndex aggrL1CapabilityAggregableType aggrL1CapabilityAggregatorIndex

Column	Syntax	OID
aggrL1CapabilityAggregableIndex This object defines the aggregable physical interface that can be used in a L1 aggregation. If the interface is a radio, this object matches the index in radioTable, otherwise this object corresponds to the ifIndex i…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.83.2.1.1
aggrL1CapabilityAggregableType L1 aggregable interface type.	AggregableType Type Values: 1 other 2 radio 3 lan	.1.3.6.1.4.1.3373.1103.83.2.1.2
aggrL1CapabilityAggregatorIndex This object defines the ifIndex of each aggregator physical interface that can be used as source of a L1 aggregation.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.83.2.1.3

A list of L1 aggregation entries.

aggrL1Entry row .1.3.6.1.4.1.3373.1103.83.3.1

An entry containing management information applicable to a L1
aggregation. Rows with the same aggrL1AggregatorIndex share
ethernet traffic and made up a L1 aggregation.

Indexes

aggrL1AggregableIndex aggrL1AggregableType

Column	Syntax	OID
aggrL1AggregableIndex This object defines the aggregable physical interface used in a given L1 aggregation. If the interface is a radio, this object matches the index in radioTable, otherwise, this object corresponds to the ifIndex in ifT…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.83.3.1.1
aggrL1AggregableType Interface type of the respective aggregable L1 interface.	AggregableType Type Values: 1 other 2 radio 3 lan	.1.3.6.1.4.1.3373.1103.83.3.1.2
aggrL1AggregatorIndex This object defines the ifIndex of the physical interface used as source of a given L1 aggregation. It must correspond to a valid aggregator interface in aggrL1CapabilityTable.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.83.3.1.3
aggrL1StorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3373.1103.83.3.1.4
aggrL1Rowstatus Status of this conceptual row in aggrL1Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.83.3.1.5

Table with alarms related to L1 aggregations. NE agent adds an entry 
in this table when at least two aggregable interfaces (in aggrL1Table) are
connected to the same aggregator interface. NE agent removes an entry in 
this table when a L1 aggregation made up of more than one aggregable 
interfaces is modified in a L1 aggregation composed by one or less 
aggregable interfaces.

aggrL1AlarmEntry row .1.3.6.1.4.1.3373.1103.83.4.1

AggrL1Alarm entry.

Indexes

aggrL1AlarmAggregatorIndex

Column	Syntax	OID
aggrL1AlarmAggregatorIndex This object defines the ifIndex of the physical interface used as source of a given L1 aggregation.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.83.4.1.1
aggrL1FailAlarm L1 Aggregation Fail Alarm with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.83.4.1.2
aggrL1DegradeAlarm L1 Aggregation Degrade Alarm with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.83.4.1.3
aggrL1RealignmentAlarm L1 Aggregation Realignment Alarm with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.83.4.1.4

A list of associations between aggregables and traffic source.

aggrL1ConnectionEntry row .1.3.6.1.4.1.3373.1103.83.8.1

An entry containing an associations between aggregable radios and
traffic source. Rows with the same aggrL1ConnAggregatorIndex
identifies aggregable radios that are connected to the same traffic
source. In the 1+1 radio…

Indexes

aggrL1ConnAggregableIndex aggrL1ConnAggregableType

Column	Syntax	OID
aggrL1ConnAggregableIndex This object defines the aggregable physical interface used in a given L1 aggregation (or radio protection). If the interface is a radio, this object matches the index in radioTable, otherwise, this object corresponds t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.83.8.1.1
aggrL1ConnAggregableType Interface type of the respective aggregable L1 interface.	AggregableType Type Values: 1 other 2 radio 3 lan	.1.3.6.1.4.1.3373.1103.83.8.1.2
aggrL1ConnAggregatorIndex This object defines the ifIndex of the physical interface used as source of a given L1 aggregation. It must correspond to a valid aggregator interface in aggrL1CapabilityTable.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.83.8.1.3

This table shows the information about the aggregation carrier 
connected through a LAN connector. In this table every entry must
have the index aggrL1ConnAggregableType equal to lan(3)

aggrL1CarrierEntry row .1.3.6.1.4.1.3373.1103.83.9.1

An entry containing information about the IP adddress and the
throughput of the carrier connected by LAN.

Indexes

aggrL1ConnAggregableIndex aggrL1ConnAggregableType

Column	Syntax	OID
aggrL1CarrierIpAddress This object shows the Ip address of the carrier (Network Element) connected with this LAN.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3373.1103.83.9.1.1
aggrL1CarrierMinCapacity This object shows the lower bound of the Ethernet capacity (in Kbit/sec) of the carrier (Network Element) connected with this LAN.	KbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.83.9.1.2
aggrL1CarrierMaxCapacity This object shows the upper bound of the Ethernet capacity (in Kbit/sec) of the carrier (Network Element) connected with this LAN.	KbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.83.9.1.3